SUO22L3B071 [SUNTSU]
Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator;型号: | SUO22L3B071 |
厂家: | Suntsu Electronics, Inc. |
描述: | Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator |
文件: | 总4页 (文件大小:629K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator
SUO22L Series
2.5mm x 2.0mm
Features
Applications
•
20ppm (Frequency Stability) Available
• Fiber Channel
• Ceramic Package
• LVDS
• Gigabit Ethernet
• PCI Express
• Tape and Reel
• Ultra Low Phase Jitter
Part Numbering Guide
SUO 22 L 3 A 48 1 - 100.000M
SUNTSU ULTRA
LOW JITTER OSC
FREQUENCY
MHz
TRI-STATE
2.5mm x 2.0mm
(ENABLE/DISABLE)
1 : Pin 1
2 : Pin 2
LVDS
OPERATING TEMPERATURE
SUPPLY VOLTAGE
1 : 1.8V 5%
RANGE
07 : 0°C - +70°C
2 : 2.5V 5%
3 : 3.3V 5%
FREQUENCY STABILITY
16 : -10°C - +60°C
17 : -10°C - +70°C
27 : -20°C - +70°C
38 : -30°C - +85°C
48 : -40°C - +85°C
A : 50ppm
COMPLIANT
B : 30ppm
C : 25ppm
*D : 20ppm
Cage Code : 4GUT4
To customize your parameters, contact a Suntsu representative.
* For Frequency stability option D, contact a Suntsu representative.
Electrical Parameters
Units
Minimum
Typical
Maximum
Remarks
Frequency Range
MHz
13.5
156.25
Frequency Stability (Includes Initial
Tolerance at 25°C, Frequency Stability
over Operating Temperature, Output Load
Change, Supply Voltage Change, and First
Year Aging at 25°C.)
ppm
-20
+20
See part numbering guide for options
See part numbering guide for options
Operating Temperature
°C
°C
V
-40
-55
+85
+125
1.890
2.625
3.465
40
Storage Temperature
Supply Voltage (VDD) - 1.8V Option
Supply Voltage (VDD) - 2.5V Option
Supply Voltage (VDD) - 3.3V Option
Current (IDD) - 1.8V Option
1.710
2.375
3.135
1.8
2.5
3.3
V
V
mA
mA
Current (IDD) - 2.5V Option
40
Current (IDD) - 3.3V Option
Output Load (LVDS)
mA
Ω
40
100
Output Logic Levels High (VOH)
Output Logic Levels Low (VOL)
Differential Output Voltage (VOD)
Differential Output Error (DVOD)
Offset Voltage (VOS)
V
1.43
1.1
1.6
V
0.9
mV
mV
V
247
330
454
50
1.125
1.250
50
1.375
50
Offset Error (DVOS)
mV
ns
%
Rise (TR) and Fall (TF) Time
Symmetry (Duty Cycle)
1
20% - 80% Output Swing Level
No Connection
45
55
Tri-State Input Voltage - Enable
Tri-State Input Voltage - Disable
Start-Up Time
V
0.7*VDD
V
0.3*VDD
10
ms
ps
ps
ps
Phase Jitter (12kHz ~ 5MHz)
Phase Jitter (12kHz ~ 20MHz)
Phase Jitter (12kHz ~ 20MHz)
0.6
0.4
0.1
1.0
Freq. <40.000M
0.8
Freq. 40.000M - 124.999M
Freq. 125.000M - 156.250M
0.2
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator
SUO22L Series
2.5mm x 2.0mm
Outline Drawing & Land Pattern
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
2.00±0.1
1.10MAX
0.60
#4
#5
#6
#3
#2
#1
#3
#2
#1
#4
#5
#6
0.6
0.6
1.20
Test Circuit (LVDS)
Waveform (LVDS)
Tri-State or NC
Tri-State or NC
Typical Phase Noise Performance (Measured By Agilent E5052A)
Frequency - 156.250MHz
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator
SUO22L Series
2.5mm x 2.0mm
Typical Jitter Performance (Measured By Agilent E5052A)
Frequency - 100.000MHz
Reflow Profile
Part Marking
Tp (Time At 260°C. 20-40 Sec)
260
Rup (Ramp Up, 3°C/Sec Max)
217
200
TI (Time Above 217°C.
60-150Sec)
150
Rdn (Ramp Down,
6°C/Sec Max)
Ts (Preheat Time.
60-180Sec)
T 25°C to Peak (480Sec Max)
Time (sec)
Tape And Reel Dimensions
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
3,000pcs/Reel
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator
SUO22L Series
2.5mm x 2.0mm
Environmental Specifications
Mechanical Specifications
Temperature Cycling
MIL-STD-883, Method 1010, Condition B
Mechanical Shock
MIL-STD-202, Method 213, Condition B
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 1004
Fine Leak Test
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
Vibration
Gross Leak Test
Moisture Resistance
Solderability
MIL-STD-883, Method 2003
J-STD-020, MSL 1
Resistance to Solvents
MIL-STD-202, Method 215
Moisture Sensitivity
Resistance to Soldering Heat
MIL-STD-202, Method 210, Condition K
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
相关型号:
©2020 ICPDF网 联系我们和版权申明