SVC75L3A17A [SUNTSU]

Ceramic SMT 6 Pad LVDS VCXO;


型号：	SVC75L3A17A
厂家：	Suntsu Electronics, Inc.
描述：	Ceramic SMT 6 Pad LVDS VCXO 石英晶振压控振荡器
文件：	总4页 (文件大小：806K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Ceramic SMT 6 Pad LVDS VCXO

SVC75L Series

7.0mm x 5.0mm

Features

Applications

•

20ppm (Frequency Stability) Available

• Fiber Channel

• Miniature Package

• LVDS

• Fundamental or PLL (Phase Lock Loop) Available

• Tape and Reel

• Gigabit Ethernet

• PCI Express

• SONET

Part Numbering Guide

SVC 75 L 3 A 48 A 2 - 67.500M

SUNTSU VCXO

FREQUENCY

MHz

TRI-STATE

(ENABLE/DISABLE)

BLANK : No Connect

7.0mm x 5.0mm

LVDS

PULLABILITY

2 : Pin 2

A : 150ppm

B : 100ppm

C : 80ppm

D : 50ppm

OPERATING

SUPPLY VOLTAGE

TEMPERATURE RANGE

2 : 2.5V 5%

3 : 3.3V 5%

07 : 0°C - +70°C

FREQUENCY STABILITY

16 : -10°C - +60°C

17 : -10°C - +70°C

27 : -20°C - +70°C

38 : -30°C - +85°C

48 : -40°C - +85°C

COMPLIANT

A : 50ppm

B : 30ppm

C : 25ppm

D : 20ppm

*E : 15ppm

Cage Code: 4GUT4

To customize your parameters contact a Suntsu representative.

* For frequency stability option E contact a Suntsu representative.

Electrical Parameters

Units

Minimum

Typical

Maximum

Remarks

Frequency Range

MHz

9.5

Frequency Stability (Includes Initial

Tolerance at 25°C, Frequency

Stability over Op Temperature,

Output Load Change, Supply

Voltage Change, and First Year

Aging at 25°C.)

ppm

-20

+20

See part numbering guide for options.

Operating Temperature

Storage Temperature

°C

-40

-55

+85

+125

2.625

3.465

Supply Voltage (VDD) 2.5V Option

Supply Voltage (VDD) 3.3V Option

Current (IDD) 2.5V Option

Current (IDD) 3.3V Option

Current Voltage (VC) 2.5V Option

Current Voltage (VC) 3.3V Option

Pullability

2.375

3.135

2.5

3.3

Only available with AT-Cut Fundamental.

Available with AT-Cut Fundamental and PLL.

0.2

0.3

2.3

3.0

ppm

100

150

See part numbering guide for options.

Linearity

Output Load (LVDS)

Ω

100

1.6

Output Logic HIGH Level (VOH)

Output Logic LOW Level (VOL)

1.43

1.1

0.9

Rise (TR) And Fall (TF) Time

Symmetry (Duty Cycle)

0.4

0.8

Measured at 20% to 80% of Waveform.

No Connection

Tri-State Input Voltage - Enable

0.7*VDD

Tri-State Input Voltage - Disable

Start-Up Time

0.3*VDD

Phase Jitter (12KHz ~ 20MHz)

0.4

AT-Cut Fundamental.

PLL (Phase Lock Loop).

Suntsu Electronics, Inc.

142 TECHNOLOGY DR., SUITE 150

IRVINE, CA 92618

www.suntsu.com

Speciﬁcations are subject

to change without notice.

Call: +1-949-783-7300 | Fax: +1-949-783-7301

Ceramic SMT 6 Pad LVDS VCXO

SVC75L Series

7.0mm x 5.0mm

Outline Drawing & Land Pattern

All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.

Test Circuit (LVDS)

Waveform (LVDS)

Typical Phase Noise Performance (Measured By Agilent E5052A)

Frequency - 50.000MHz

Frequency - 200.000MHz

Suntsu Electronics, Inc.

142 TECHNOLOGY DR., SUITE 150

IRVINE, CA 92618

www.suntsu.com

Speciﬁcations are subject

to change without notice.

Call: +1-949-783-7300 | Fax: +1-949-783-7301

Ceramic SMT 6 Pad LVDS VCXO

SVC75L Series

7.0mm x 5.0mm

Typical Jitter Performance (Measured By Agilent E5052A)

Frequency - 50.000MHz

Frequency - 200.000MHz

Reﬂow Proﬁle

Part Marking

Tp (Time At 260°C. 20-40 Sec)

260

Rup (Ramp Up, 3°C/Sec Max)

217

200

TI (Time Above 217°C.

60-150Sec)

150

Rdn (Ramp Down,

6°C/Sec Max)

Ts (Preheat Time.

60-180Sec)

T 25°C to Peak (480Sec Max)

Time (sec)

Tape And Reel Dimensions

All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.

1,000pcs/Reel

Suntsu Electronics, Inc.

142 TECHNOLOGY DR., SUITE 150

IRVINE, CA 92618

www.suntsu.com

Speciﬁcations are subject

to change without notice.

Call: +1-949-783-7300 | Fax: +1-949-783-7301

Ceramic SMT 6 Pad LVDS VCXO

SVC75L Series

7.0mm x 5.0mm

Environmental Speciﬁcations

Mechanical Speciﬁcations

Temperature Cycling

MIL-STD-883, Method 1010, Condition B

Mechanical Shock

MIL-STD-202, Method 213, Condition B

MIL-STD-883, Method 2007, Condition A

MIL-STD-883, Method 1004

Fine Leak Test

MIL-STD-883, Method 1014, Condition A

MIL-STD-883, Method 1014, Condition C

Vibration

Gross Leak Test

Moisture Resistance

Solderability

MIL-STD-883, Method 2003

J-STD-020, MSL 1

Resistance to Solvents

MIL-STD-202, Method 215

Moisture Sensitivity

Resistance to Soldering Heat

MIL-STD-202, Method 210, Condition K

Suntsu Electronics, Inc.

142 TECHNOLOGY DR., SUITE 150

IRVINE, CA 92618

www.suntsu.com

Speciﬁcations are subject

to change without notice.

Call: +1-949-783-7300 | Fax: +1-949-783-7301

相关型号：

SUNTSU