SVC75L3D17A [SUNTSU]
Ceramic SMT 6 Pad LVDS VCXO;型号: | SVC75L3D17A |
厂家: | Suntsu Electronics, Inc. |
描述: | Ceramic SMT 6 Pad LVDS VCXO 石英晶振 压控振荡器 |
文件: | 总4页 (文件大小:806K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ceramic SMT 6 Pad LVDS VCXO
SVC75L Series
7.0mm x 5.0mm
Features
Applications
•
20ppm (Frequency Stability) Available
• Fiber Channel
• Miniature Package
• LVDS
• Fundamental or PLL (Phase Lock Loop) Available
• Tape and Reel
• Gigabit Ethernet
• PCI Express
• SONET
Part Numbering Guide
SVC 75 L 3 A 48 A 2 - 67.500M
SUNTSU VCXO
FREQUENCY
MHz
TRI-STATE
(ENABLE/DISABLE)
BLANK : No Connect
7.0mm x 5.0mm
LVDS
PULLABILITY
2 : Pin 2
A : 150ppm
B : 100ppm
C : 80ppm
D : 50ppm
OPERATING
SUPPLY VOLTAGE
TEMPERATURE RANGE
2 : 2.5V 5%
3 : 3.3V 5%
07 : 0°C - +70°C
FREQUENCY STABILITY
16 : -10°C - +60°C
17 : -10°C - +70°C
27 : -20°C - +70°C
38 : -30°C - +85°C
48 : -40°C - +85°C
COMPLIANT
A : 50ppm
B : 30ppm
C : 25ppm
D : 20ppm
*E : 15ppm
Cage Code: 4GUT4
To customize your parameters contact a Suntsu representative.
* For frequency stability option E contact a Suntsu representative.
Electrical Parameters
Units
Minimum
Typical
Maximum
Remarks
Frequency Range
MHz
9.5
80
Frequency Stability (Includes Initial
Tolerance at 25°C, Frequency
Stability over Op Temperature,
Output Load Change, Supply
Voltage Change, and First Year
Aging at 25°C.)
ppm
-20
+20
See part numbering guide for options.
See part numbering guide for options.
Operating Temperature
Storage Temperature
°C
°C
V
-40
-55
+85
+125
2.625
3.465
50
Supply Voltage (VDD) 2.5V Option
Supply Voltage (VDD) 3.3V Option
Current (IDD) 2.5V Option
Current (IDD) 3.3V Option
Current Voltage (VC) 2.5V Option
Current Voltage (VC) 3.3V Option
Pullability
2.375
3.135
2.5
3.3
Only available with AT-Cut Fundamental.
Available with AT-Cut Fundamental and PLL.
V
mA
mA
V
60
0.2
0.3
50
2.3
V
3.0
ppm
%
100
150
10
See part numbering guide for options.
Linearity
Output Load (LVDS)
Ω
100
1.6
Output Logic HIGH Level (VOH)
Output Logic LOW Level (VOL)
V
1.43
1.1
V
0.9
Rise (TR) And Fall (TF) Time
Symmetry (Duty Cycle)
ns
%
0.4
50
0.8
55
Measured at 20% to 80% of Waveform.
No Connection
45
Tri-State Input Voltage - Enable
V
0.7*VDD
Tri-State Input Voltage - Disable
Start-Up Time
V
0.3*VDD
ms
ps
ms
10
1
Phase Jitter (12KHz ~ 20MHz)
Phase Jitter (12KHz ~ 20MHz)
0.4
3
AT-Cut Fundamental.
PLL (Phase Lock Loop).
5
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic SMT 6 Pad LVDS VCXO
SVC75L Series
7.0mm x 5.0mm
Outline Drawing & Land Pattern
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
Test Circuit (LVDS)
Waveform (LVDS)
Typical Phase Noise Performance (Measured By Agilent E5052A)
Frequency - 50.000MHz
Frequency - 200.000MHz
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic SMT 6 Pad LVDS VCXO
SVC75L Series
7.0mm x 5.0mm
Typical Jitter Performance (Measured By Agilent E5052A)
Frequency - 50.000MHz
Frequency - 200.000MHz
Reflow Profile
Part Marking
Tp (Time At 260°C. 20-40 Sec)
260
Rup (Ramp Up, 3°C/Sec Max)
217
200
TI (Time Above 217°C.
60-150Sec)
150
Rdn (Ramp Down,
6°C/Sec Max)
Ts (Preheat Time.
60-180Sec)
T 25°C to Peak (480Sec Max)
Time (sec)
Tape And Reel Dimensions
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
1,000pcs/Reel
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic SMT 6 Pad LVDS VCXO
SVC75L Series
7.0mm x 5.0mm
Environmental Specifications
Mechanical Specifications
Temperature Cycling
MIL-STD-883, Method 1010, Condition B
Mechanical Shock
MIL-STD-202, Method 213, Condition B
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 1004
Fine Leak Test
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
Vibration
Gross Leak Test
Moisture Resistance
Solderability
MIL-STD-883, Method 2003
J-STD-020, MSL 1
Resistance to Solvents
MIL-STD-202, Method 215
Moisture Sensitivity
Resistance to Soldering Heat
MIL-STD-202, Method 210, Condition K
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
相关型号:
©2020 ICPDF网 联系我们和版权申明