SDS252012D220MF [SUPERWORLD]
SMD Power Inductors;型号: | SDS252012D220MF |
厂家: | SUPERWORLD ELECTRONICS |
描述: | SMD Power Inductors |
文件: | 总7页 (文件大小:178K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMD Power Inductors
SDS252012D SERIES
1. PART NO. EXPRESSION :
(a) Series code
(d) Inductance code : 100 = 10.0uH
S D S 2 5 2 0 1 2 D 1 0 0 M F
(a)
(b)
(c) (d) (e)(f)
(b) Dimension code
(c) Material code
(e) Tolerance code : M = ± 20%
(f) F : RoHS Compliant
2. CONFIGURATION & DIMENSIONS :
A
D
E
D
L
G
Recommended PCB Pattern
Unit:m/m
H
A
B
C
D
E
L
G
2.5 -0.1/+0.2 2.0 -0.05/+0.35
1.2 Max.
0.85 Ref.
0.80 Ref.
2.9 Ref.
0.8 Ref.
2.4 Ref.
3. MATERIALS :
(a) Core : Ferrite Core
a
(b) Coating : Epoxy with magnetic powder
(c) Termination : Tin Pb Free
b
(d) Wire : Enameled Copper Wire
d
c
Exposed wire tolerance limit of coating resin part on product side.
Size of exposed wire occurring to coating resin is specified below.
1. Width direction(dimension a):Acceptable when a≦w/2
a
w
Nonconforming when a>w/2
2. Length direction(dimension b):Dimension b is not specified.
3. The total area of exposed wire occurring to each sides is
not greater than 50% of coating resin area, and is acceptable.
NOTE : Specifications subject to change without notice. Please check our website for latest information.
16.01.2014
PG. 1
SUPERWORLD ELECTRONICS (S) PTE LTD
SMD Power Inductors
SDS252012D SERIES
4. GENERAL SPECIFICATION :
a) ambient temp. : 25° C
b) Isat : Based on inductance change (ΔL/L0 : ≦-30%)
c) Irms : Based on temperature rise (ΔT : 40°C) Max
d) Operating temp. : -55° C to 125° C(for products in unopened tape package, less than 40° C)
5. ELECTRICAL CHARACTERISTICS :
Isat
(A)
Typ.
Irms
(A)
Typ.
Test
Frequency
( Hz )
Inductance
( uH )
DCR
Part No.
( Ω )±20%
SDS252012D100MF
SDS252012D220MF
10± 20%
22± 20%
0.1V/1M
0.1V/1M
0.410
0.850
0.85
0.56
0.75
0.50
NOTE : Specifications subject to change without notice. Please check our website for latest information.
16.01.2014
PG. 2
SUPERWORLD ELECTRONICS (S) PTE LTD
SMD Power Inductors
SDS252012D SERIES
6. CHARACTERISTICS CURVES :
SDS252012D100MF
SDS252012D220MF
NOTE : Specifications subject to change without notice. Please check our website for latest information.
16.01.2014
PG. 3
SUPERWORLD ELECTRONICS (S) PTE LTD
SMD Power Inductors
SDS252012D SERIES
7. RELIABILITY AND TEST CONDITION :
ITEM
PERFORMANCE
TEST CONDITION
Electrical Characteristics Test
Agilent-4291, Agilent-4287
InductanceL
Q
Refer to standard electrical characteristics list
Agilent-4192, Agilent-4285
Agilent-4291
SRF
DC Resistance
Rated Current
Agilent-4338
Base on temp. rise & ΔL/L0A≦30%.
ΔT 40°CMax
Saturation DC Current (Isat) will cause L0
to drop approximately ΔL(%).
Temperature RiseTest
Heat Rated Current (Irms) will cause thecoil temperature
rise approximately ΔT(°C) without core loss.
1.Applied the allowedDC current.
2.Temperature measured by digital surfacethermometer
Mechanical PerformanceTest
Solder Heat Resistance
Appearance : No damage.
Temperature
(° C)
Time
(s)
Temperature
ramp/immersion
Number
of heat
Inductance : within± 10% ofinitial value
and emersion rate
cycles
Q : Shall not exceed the specificationvalue.
260± 5
(solder temp)
RDC : within ± 15% of initial valueand shall not
exceed the specificationvalue
10± 1
25mm/s± 6 mm/s
1
Depth: completely cover the termination
Solderability Test
More than 95% of terminal electrode should be
covered with solder.
Preheat : 150° C,60sec
Solder : Sn99.5%-Cu0.5%
Temperature : 245±5° C
Flux for lead free : Rosin.9.5%
Dip time : 4± 1sec
Depth : completely cover thetermination
Reliability Test
Life Test
Appearance : No damage.
Inductance : within± 10% ofinitial value
Preconditioning:Run through IR reflow for 2times.( IPC/
JEDEC J-STD-020DClassification Reflow Profiles
Temperature : 85± 2° C(Inductor)
Q : Shall not exceed the specificationvalue.
Applied current : ratedcurrent
Duration : 1000±12hrs
RDC : within ± 15% of initial valueand shall not
exceed the specificationvalue
Measured at room temperature after placingfor 24±2hrs
Thermal shock
Preconditioning:Run through IR reflow for 2times.( IPC/
JEDEC J-STD-020DClassification Reflow Profiles
Step1 : -40± 2° C 30±5min
Step2 : 25±2°C ≦0.5min
Step3 : 105± 2° C 30±5min
Number of cycles : 500
Measured at room fempraturc after placingfor 24±2hrs
Humidity Resistance Test
Preconditioning:Run through IR reflow for 2times.( IPC/
JEDEC J-STD-020DClassification Reflow Profiles
Humidity : 85±2﹪R.H
Temperature : 85° C±2° C
Duration : 1000hrs Min. with 100% ratedcurrent
Measured at room temperature after placingfor 24±2 hrs
VibrationTest
Preconditioning:Run through IR reflow for 2times.( IPC/
JEDEC J-STD-020DClassification Reflow Profiles
Oscillation Frequency : 10~2K~10Hz for 20 minutes
Equipment : Vibrationchecker
Total Amplitude : 1.52mm±10%
Testing Time : 12 hours(20 minutes,12cycles eachof3
orientations)
NOTE : Specifications subject to change without notice. Please check our website for latest information.
16.01.2014
PG. 4
SUPERWORLD ELECTRONICS (S) PTE LTD
SMD Power Inductors
SDS252012D SERIES
8. SOLDERING AND MOUNTING :
8-1. Soldering
Mildly activated rosin fluxes are preferred. Our terminations are suitable for all wave and re-flow soldering systems.
If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools.
8-1.1 Lead Free Solder Re-flow :
Recommended temperature profiles for re-flow soldering in Figure 1.
8-1.2 Soldering Iron (Figure 2) :
Products attachment with soldering iron is discouraged due to the inherent process control limitations. In the event that
a soldering iron must be employed the following precautions are recommended.
Note :
a) Preheat circuit and products to 150° C.
b) 355° C tip temperature (max)
d) 1.0mm tip diameter (max)
e) Use a 20 watt soldering iron with tip diameter of 1.0mm
f) Limit soldering time to 4-5 secs.
c) Never contact the ceramic with the iron tip
Preheating
Soldering
within 4-5s
Natural
cooling
Preheating
Soldering
20~40s
Natural
cooling
350
150
TP(260° C/40s max.)
217
200
150
60~150s
60~180s
480s max.
25
Gradual
Cooling
Time(sec.)
Over 1min.
Time(sec.)
Figure 1. Re-flow Soldering : 3 times max.
Figure 2. Iron Soldering : 1 times max.
NOTE : Specifications subject to change without notice. Please check our website for latest information.
16.01.2014
PG. 5
SUPERWORLD ELECTRONICS (S) PTE LTD
SMD Power Inductors
SDS252012D SERIES
9. PACKAGING INFORMATION :
9-1. Reel Dimension
A
Type
A(mm)
B(mm)
50 Min.
C(mm)
13± 0.8
D(mm)
178± 2
7" x 8mm
8.4± 1.0
7" x 8mm
9-2 Tape Dimension / 8mm
Po:4± 0.1
P2:2± 0.05
t
P
Ao
Ko
Bottom View
Series
Ao(mm)
Bo(mm)
Ko(mm)
P(mm)
t(mm)
SDS252012D 2.45± 0.1 2.85± 0.1 1.40± 0.1 4.0± 0.1 0.23± 0.05
9-3. Packaging Quantity
Size
SDS252012D
2000
Chip / Reel
NOTE : Specifications subject to change without notice. Please check our website for latest information.
16.01.2014
PG. 6
SUPERWORLD ELECTRONICS (S) PTE LTD
SMD Power Inductors
SDS252012D SERIES
9-4. Tearing Off Force
The force for tearing off cover tape is 15 to 80 grams
in the arrow direction under the following conditions.
F
165° to 180°
Room Temp.
(° C)
Room Humidity
(%)
Room atm Tearing Speed
Top cover tape
(hPa)
(mm/min)
5~35
45~85
860~1060
300
Base tape
Application Notice
1. Storage Conditions :
To maintain the solderabililty of terminal electrodes :
a) Temperature and humidity conditions : Less than 40° C and 60% RH.
b) Recommended products should be used within 12 months from the time of delivery.
c) The packaging material should be kept where no chlorine or sulfur exists in the air.
2. Transportation :
a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils.
b) The use of tweezers or vacuum pick up is strongly recommended for individual components.
c) Bulk handling should ensure that abrasion and mechanical shock are minimized.
NOTE : Specifications subject to change without notice. Please check our website for latest information.
16.01.2014
PG. 7
SUPERWORLD ELECTRONICS (S) PTE LTD
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
©2020 ICPDF网 联系我们和版权申明