EMHB [SWITCH]
暂无描述;
| 型号： | EMHB |
| 厂家： | 
SWITCHCRAFT, INC. |
| 描述： | 暂无描述 |
| 文件： | 总2页 (文件大小：1305K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NEW
PRODUCT
BULLETIN
E SERIES RECEPTACLES WITH SOLDER CUPS
Ne w S o ld e r
Cu p Op t io n s
S P ECIFICATIONS :
ELECTRICAL
Contact Resistance: 50 milliohms maximum, per pole.
Current Rating: 15A
Insulation Resistance: 2 X 106 M?
Dielectric Resistance: 1,000 V rms
Capacitance: 10 pF
Switchcraft now offers the E Series with a solder cup
option.This new option is perfect for panel mount,
non-PC board applications.The solder cups offer a
generous area to solder. Available in male and fe-
male, the receptacles can be mounted from the front
or rear of the panel. See the back page for part num-
bers.This new option is in addition to all of the previ-
ous termination options available with the E Series.
MECHANICAL
Insertion/Withdrawal Forces: 7 pounds maximum/5 pounds
nominal insertion; 7 pounds maximum/5 pounds nominal
withdrawal.
Life: 10,000 operations (minimum).
E S ERIES FEATURES
• Replaces Neutrik D Series
• 3-pin contact; male and female types
ENVIRONMENTAL
Thermal Range: -55° C to +85° C
Humidity: Meets MIL-STD-202F, method 106E.
Thermal Shock: Meets MIL-STD-202F, method 107D
Salt Spray: Meets MIL-STD-202F, method 101D
• Both male and female fit in same panel cutout
• Choice of 4 terminations; solder cups, conical spring solder
terminals, straight or right-angle PC terminals
• Inserts and housings can be specified and stocked sepa-
rately to minimize inventory and maximize configuration possi-
bilities, for cost/time savings.
• Quick release inserts for ease of removal. For PC board
applications, insert can be removed/assembled to the housing
while soldered to the PC board.
MATERIAL
Shells: Die-cast; satin-nickel or Black Velvet.
Inserts: Glass-filled thermoplastic.
Socket Contacts: Copper alloy, silver- or gold-plated.
Pin Contacts: Copper alloy, silver- or gold-plated.
Latch Release: Steel, nickel-plated.
Insert Locking Cam: Die-cast zinc.
• Locking receptacles
• Protected ground clip minimizes scooping damage
•
Insert lock detent resists disassembly from shock or vibration
INS ERTS AND HOUS INGS
during normal handling and transportation
• Silver and gold-plated contacts available
• Rugged metal shells; black or satin nickel finishes
• Through-the-shell ground connection and all-metal shells for
greater shielding effectiveness
• Compatible with Switchcraft Q-G®, QGP and other
connectors with similar configurations
Inserts and housings can be ordered separately to make any
possible combination of the following features:
1. Silver or gold contacts
2. Satin nickel or black chrome over nickel housing
3. Locking
4. Male or female connector
5. Conical spring solder terminals, solder cup, straight or right-
angle PC terminals
QG® PART NUMBERING S YS TEM
Each character (or absence thereof) in the part numbers
COMP LETE-CONNECTOR-AS S EMBLIES
S ATIN NICKEL HOUS ING (solder cup version only)
Part
Locking or
Number Terminals Non-LockingContacts Housing
Insert
Housing Type
Character
Description
E3FSC
E3FSCQG EFHB
F
Solder
Satin
E
3
Series designator
3 pins or contacts
*
M – male connector; F – female connector
Denotes insert only
COMP LETE-CONNECTOR-AS S EMBLIES
BLACK HOUS ING (solder cup version only)
QG
H
Denotes housing only
Part
Locking or
Number Terminals Non-LockingContacts Housing
Insert
Housing Type
B
Black housing (absence of ‘B’ denotes satin-nickel
housing)
E3FSCB
E3MSCB
E3FSCBAU
E3FSCQG EFHB
E3MSCQG EMHB
E3FSCAUQG EFHB
F
M
F
Solder
Cup
Locking
Silver
Black
RA
Right-angle PC terminals (absence of ‘RA’ or ‘ST’ de-
conical spring solder terminals)
note
Solder
ST
Straight PC terminals (absence of ‘ST’ or ‘RA’ denote
conical spring solder terminals)
FAS DIS CONNECT VERS IONS – DETENT (solder cup version
Part Locking or
Number Terminals Non-LockingContacts Housing
Insert
Housing Type
QUCIK
E3FDSC
E3FDSCB
Satin-nickel
Black
EFDH
EFDHB
EFDH
F
F
F
Solder
Cup
RELEAS E INS ERT
In two simple steps, inserts can be released while housing
stays fastened to the panel.
1. With a small screwdriver, twist insert locking screw from
front of insert.
Non-Locking Silver
E3FDSCQG
?E3FDSCAU
Satin-nickel
Solder
2. Remove insert from the rear of the housing.
TERMINALS
INS ERTS (solder cup version only)
Four terminations are available on E Series receptacles:
1. Conical Spring Solder terminals – conical spring on each pin
holds wire in place providing constant pressure during soldering
process. This effectively acts as a third hand, assuring a high
quality solder termination. Housing mounts to panel.
2. Straight PC terminals – direct termination to PC board. Hous-
ing mounts to panel.
Locking or
Non-Locking Type
Part Number Contacts
Terminals
Solder Cup
Solder Cup
Solder Cup
E3FSCQG
E3MSCQG
Silver
Silver
Gold
Locking
—
F
M
F
?E3FSCAUQG
Locking
3. Right-angle PC terminals – direct termination to PC board at
a right-angle. Housing mounts to panel.
SWITCHCRAFT, INC.
5555 North Elston Avenue
Chicago, IL 60630
773-792-2700
Fax 773-792-2129
www.switchcraft.com
Switchcraft, Inc. isamajormanufacturerofabroadlineofelectronic/
electromechanicalcomponentsfortheaudio/video, telecommunica-
tion, datacommunication, computer, medical, military, appliance,
transportationandinstrumentationmarkets.
We reserve the right to change the prices, specifications and/or part numbers contained herein when circumstances make it necessary.
Form No. GL-2201 3/98 © Switchcraft, Inc. 1998 Printed in U.S.A.
相关型号：
©2020 ICPDF网 联系我们和版权申明