NQ20T20HGD80NKS-G [SYNQOR]
DC-DC Regulated Power Supply Module, 1 Output, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-10;型号: | NQ20T20HGD80NKS-G |
厂家: | SYNQOR WORLDWIDE HEADQUARTERS |
描述: | DC-DC Regulated Power Supply Module, 1 Output, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-10 |
文件: | 总7页 (文件大小:1483K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical
Specification
NQ20x20HGx80
9-20 V
Continuous Input
0-20V
Outputs
80A
Current
Non-
Isolated
Half-brick
DC-DC Converter
The NiQor Half-brick dc-dc converter is a non-isolated buck-
boost regulator, which employs synchronous rectification
to achieve extremely high conversion efficiency. The High
Input Voltage NiQor Brick family of converters can be used
in traditional DPA (distributed power architecture) systems
or provide a regulated output voltage from a battery source
or other variable voltage source. The NiQor Half-brick family
can be configured to Buck the input voltage down to a
lower voltage or Boost the input voltage up to a higher
voltage using a single external resistor. These module
RoHS 6/6 compliant (see page 7).
Non-Ilated
NiQor brick module
Operational Features
• High efficiency, 95% at full rated load current
• Delivers up to 80A of output current
• Input Voltage Range: 9-20 Vdc
Protection Fures
• Output Voltage Range: 0-20V (negativossible)
• Extensive on-board input and output filterin
• No minimum load requirement mans no preload s required
• Buck or buck-boost versions av
• Input under-vole lockout protects the converter at low input
oltage conitions
r-currenshutdown protects converter from excessive
urrent or short circuits
• Input over-voltage protection protects load and regulator
• Adjustable current limit currer (F option)
from damaging voltages
Thermal shutdown protects converter from abnormal
vironmental conditions
Mechanical Feat
• Industry standarpin-out onfigurati
• Standard size: 2.9" x .3.1mm x 6mm)
Safety Features
• Total height only 0.52" (13.0 mm)
• Total weight: Encased - TBD
Pending
● EN60950-1:2006 / A11:2009 / A1:2010
● UL 60950-1:2007
● CAN/CSA-C22.2 No. 60950-1:2003
Contents
Control Featur
Page No.
Standard Mechanical Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Flanged Mechanical Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Technical Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Ordering Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
• On/Off control
• Output voltage trim custom voltages
• Remote Sense (S optionard)
• Current limit trim (F option
• Output voltage trim range o-10%, +10%
Product # NQ20x20HGx80
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0006100 Rev. 1
05/13/11
Page 1
9-20 V
0-20V
Input:
Outputs:
Current:
Package
80A
Half-brick
Standard Mechanical Diagram
2.486± .020
[ 63,14± 0,5
]
2.00
[50,8 ]
1.400 [35,56 ]
1.000 [25,4 ]
.700 [17,78 ]
.400 [10,16 ]
+.002
-.00
+0,05
.512
.243± .020
[ 6,17± 0,5
13
[
0,12
]
.16
[4,1 ]
]
ERALL
HEIGHT
8
7
6
5
4
243± .020
17± 0,5
1.90
[48,3 ]
TOP VIEW
SIDE
VIEW
2.386± .020
[ 60,6± 0,5
]
1.9
[48,3
.233± .020
[ 5,92± 0,5
]
1
2
A
C
3
MTHRU
STDOFFS
SEE NOTE 9
.017± .010
[ 0,43± 0,25
BOTTOMSIDE
CLEARANCE
.400 [10,16 ]
.600 [15,
1.000 [25,4 ]
1.[35,56 ]
]
.543± .020
[ 13,79± 0,5
]
NOTES
PIN DESIGNATIONS
1)
2)
Applied torque per scrhould ed 6in lb (.7Nm)
Baseplate flatness tol0.004mm) TIR for surface
Pi
abel
Function
1
Vin(+)
ON/OFF
ITRIM
Positive input
3)
4)
5)
Pins 1-3, 5-7, A, and C ar(1.02) dia. with 080"
(2.03mm) diastandoff shou
TTL input to turn converter on and off, referenced
to Vin(-), with internal pull up
Pins 4 and 80" (2.03mwith .125" (3.1standoff
shoulders
A
Output current trim
All pins: Material: y, Finish: Matte er Nicke
C
3
4
5
6
7
ISHARE
Vin(-)
Vout(-)
Current share
6)
7)
Undimensioned comoneare shown isual erence only
Negative input voltage
Negative output voltage
All dimensions in nches[mm]. ToleranceIN +/-(X.Xmm
+/-0.5mm) X.XXXI+/-0.010 (X.mm +/-m)
SENSE(-) Negative remote sense. See note 1
VTRIM Output voltage trim
SENSE(+) Positive remote sense. See note 2
Vout(+) Positive output voltage
8)
9)
Weight: TBD
Threaded or non-threaded ions available
Workmanship: Meets or exIPC-A-610 Class II
10
8
Notes:
1)SENSE(–) should be connected to Vout(–) either remotely or at the
converter
2)SENSE(+) should be connected to Vout(+) either remotely or at the
converter.
Product # NQ20x20HGx80
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0006100 Rev. 1
05/13/11
Page 2
9-20 V
0-20V
Input:
Outputs:
Current:
Package
80A
Half-brick
Flanged Mechanical Diagram
SIDE
VIEW
1.400 [35.56 ]
.495± .025
3.15 [80 ]
1.000 [25.4 ]
.700 [17.78 ]
.400 [10.16 ]
[ 12.57± 0.63
OVERALL HEIGHT
]
2.95 [74.9 ]
2.486± .020
[ 63.14± 0.5 ]
.18
[4.6 ]
USE WITH 4-40
OR M3 SCREW (6x)
R.065 [ 1.65 ]
8
6
5
1.61
[40.9 ]
1.900
[48.26 ]
TOP VIEW
BOTTOM VIEW
1.87
[47.4 ]
0
[
.96
[24.4 ]
C
2
1
.31
[7.9 ]
1
.027± .020
[ 0.69± 0.5
.400 [10.16 ]
.600 [15.24 ]
1.000 [25.4 ]
1.400 [35.56 ]
.010
[ 0.13± 0.25
BOTTOMSIDE
CLEARANC
.543± .020
.775± .020
.875± .020
[ 13.79± 0.5
[ 19.69± 0.5
[ 22.23± 0.5
]
]
]
]
]
.125
3.18 ]
NOTES
PIN DESIGNATIONS
Function
1)
Applied torque per screshould ed 5in lb,
Label
3 in-lb recommende
1
Vin(+)
Positive input
2)
3)
Baseplate flatness toler.01" (.m) TIR for surface
TTL input to turn converter on and off, referenced
to Vin(-), with internal pull up
Pins 1-3, 5-7, A, and C are 1.02mm) dia. wit
0.080" (2.0dia. standoff rs
Pins 4 and (2.03mma. With
.125" (3.18) dia. oulders
ON/OFF
A
ITRIM
Output current trim
4)
C
ISHARE Current share
5)
6)
7)
All pins: Materal: Co, Finish: tte Tin er Nickel Pl
Undimensioned omponens are shown ual only
All dimensions in iches[mm],
3
4
5
6
Vin(-)
Vout(-)
Negative input voltage
Negative output voltage
SENSE(-) Negative remote sense. See note 1
VTRIM Output voltage trim
Tolerances: X.XXIN /-0.02
7
8
SENSE(+) Positive remote sense. See note 2
Vout(+) Positive output voltage
(X.Xmm +/-0.5mm) X.XXXI+/-0.010 (X.XXmm 5mm)
Weight: TBD
8)
9)
Notes:
Workmanship: Meets or exce-A-610 Clss II
1)SENSE(–) should be connected to Vout(–) either remotely or at the
converter
2)SENSE(+) should be connected to Vout(+) either remotely or at
the converter.
Product # NQ20x20HGx80
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0006100 Rev. 1
05/13/11
Page 3
9-20 V
0-20V
Input:
Outputs:
Current:
Package
80A
Half-brick
Technical Specification
NQ20x20HGx80 Electrical Characteristics
Ta = 25 °C, airflow rate = 300 LFM, Vin = 12 V dc unless otherwise noted; full operating temperature range is -40 °C to +105 °C ambient temperature with appropriate power derating.
Specifications subject to change without notice.
Parameter
ABSOLUTE MAXIMUM RATINGS
Vout Min.
Typ.
Max. Units Notes & Conditions
Input Voltage
Non-Operating
Operating
Storage Temperature
Voltage at ON/OFF input pin
RECOMMENDED OPERATING CONDITIONS
Input Voltage Range
All
All
All
All
0
30
20
125
5.5
V
V
°C
V
Continu
Cntinuou
-55
0
All
All
9
20
100
8
V
A
A
µF
V
A
on at 10
Input Fuse Rating
w extnal fuse r
Inpnt max equals output r
ESR < 5 Ω
Input Current
External Input Capacitance
Output Voltage
All
All
All
100
0
0
8
Output Current
Output voltage penden
INPUT CHARACTERISTICS
Input Under-Voltage Lockout
Turn-On Voltage Threshold
Turn-Off Voltage Threshold
Lockout Hysteresis
Input Current Limit
No-Load Input Current
“
All
All
All
All
5
12
20
All
All
9.2
8.1
1.0
0
V
V
V
A
m
mA
mA
µF
“
Disabled Input Current
Input Filter Components Value (C\L\C)
OUTPUT CHARACTERISTICS
Output Voltage Range
Operating Output Current Range
Output Voltage Regulation
Total Output Voltage Range
Output Voltage Ripple ane (pk-)
“
40\0.1\120
All
0
0
20
80
V
A
et output by Rtrim resistor
Sense pin, over sample, line, load, temp. & life
All
5
12
20
Al
All
±mV ±4
mV
mV
mV
A
12 Vin Full Load; 100uF; 20 MHz b.w.
"
“
Output DC Overrent limit
External Outpnce
F Option: Isense v
No load
96
Effective on input, output condition
ESR > 1 mΩ
5000
µF
A
All
V
V
kΩ
Full load
80 A load
Output resistancof Isense
F Option: Itrim voltage
Voltage at no load
All
All
All
All
0.12
2.12
10.2
2.5
V
V
kΩ
V
Voltage at maximum load
Pull-Up Resistance of Itrim
Pull-Up Voltage
80 A load
F Option: Reverse Curre
EFFICIENCY
µA
Enabled or Disabled
100% Load; 20 Vi
“ ; 20 Vin
“ ; 12 Vin
50% Load; 20 Vin
5
%
%
%
%
%
%
12
20
5
12
20
W mode only
W mode only
“ ; 20 Vin
“ ; 12 Vin
Product # NQ20x20HGx80
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0006100 Rev. 1
05/13/11
Page 4
9-20 V
0-20V
Input:
Outputs:
Current:
Package
80A
Half-brick
Technical Specification
NQ20x20HGx80 Electrical Characteristics (continued)
Ta = 25 °C, airflow rate = 300 LFM, Vin = 12 V dc unless otherwise noted; full operating temperature range is -40 °C to +105 °C ambient temperature with appropriate power derating.
Specifications subject to change without notice.
Parameter
Vout Min. Typ. Max. Units Notes & Conditions
DYNAMIC CHARACTERISTICS
Output Voltage during Current Transient
For a Step Change in Output Current
Settling Time
All
V
(0.1 A%-75Iout max
o within out no
All
ms
Turn on Transient
Startup delay
Rise Rate
Output Voltage Overshoot
FEATURE CHARACTERISTICS
Switching Frequency
All
All
All
ms
V
Restive load
"
All
240
250
260
kHz
ON/OFF Control
Negative Logic (N) ON/OFF Control
Off-State Voltage
On-State Voltage
Pull-Up Voltage
Pull-Up Resistance
Output Voltage Trim Range
Input/Output Over-Voltage Protection
Over-Temperature Shutdown
Over-Temperature Shutdown Restart Hysteresis
RELIABILITY CHARACTERISTICS
Calculated MTBF (TR-NWT-000332; Telcordia)
Calculated MTBF (MIL-HDBK-217F; MIL-217)
Field Demonstrated MTBF
TEMP LIMITS FOR POWER DERATI
Semiconductor Junction Temperature
Board Temperature
All
All
All
All
All
All
Al
1.8
0
0
V
kΩ
V
V
°C
°C
3.3
0
22
2
asureto common pins
Over full tee
erage PCB Teature
24
15
15
All
All
All
D
TBD
106 Hrs. 100% 200LFM, 40 °C Ta
Hrs. 100% ld, 200LFM, 40 °C Ta
See our website for details
All
ll
125
125
100
°C
°C
C
Package rated to 150 °C
ULrated max operating temp 130 °C
Baseplate Temperature
Product # NQ20x20HGx80
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0006100 Rev. 1
05/13/11
Page 5
9-20 V
0-20V
Input:
Outputs:
Current:
Package
80A
Half-brick
Technical Specification
Parameter
STANDARDS COMPLIANCE
Notes & Conditions
Pending
EN60950-1:2006 / A11:2009 / A1:2010
UL 60950-1:2007
CAN/CSA-C22.2 No. 60950-1:2003
Note: An external input fuse must always be used to meet these safety requirements. Contact SynQor for officafety cs on new
releases or download from the SynQor website.
Parameter
QUALIFICATION TESTING
Life Test
# Units Test ions
32
95% rated Vin and lat deratig point, 100
Vibration
5
5
10
5
10-55 Hz sweep, 0.060” total excursmin./sweep, 1ps for 3 axis
0g minimum, 2 drops in x, y anz ax
Mechanical Shock
Temperature Cycling
Power/Thermal Cycling
Design Marginality
Humidity
o 100 °C, it temp. ramp 1°C/m0 cycles
Tomin to max, V= min to max, f, 100 cycles
TminTmax+10 °steps, Vin = mimax, 0-105% load
85 °C, 85% RH, 1000 hours, cs Vin applied except 5 min/day
MI-STD-883, metd 2003
5
5
15 pins
2
Solderability
Altitude
70,0 feet (21 km), se Note
Note: A conductive cooling design is generor high altitude appations because of naturally poor convective cooling at rare atmospheres.
Product # NQ20x20HGx80
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0006100 Rev. 1
05/13/11
Page 6
9-20 V
0-20V
Input:
Outputs:
Current:
Package
80A
Half-brick
Ordering Information
PART NUMBERING SYSTEM
ORDERING INFORMATION
The part numbering system for SynQor’s dc-dc converters
follows the format shown in the example below.
The tables below show the valid model numbers and ordering
options for converters in this product family. When ordering
SynQor converters, please ensuryou use the complete
15 character part number csisting 12 character base
part number and the adl 3 cters for options.
Add “-G” to the modenumb/6 RoS compliance.
NQ 20 W 20
H
G
C 80 N N S - G
6/6 RoHS
Options (see
In
Voltagoltage
9-20 V 0-20V
Output Max Output
Model Number
Ordering Information)
Current
80A
Output Current
Thermal Design
Performance Level
Package Size
Output Voltage
Mode (see Ordering Information)
Input Voltage
Product Family
NQ20w2
The folowing options mincluded in place of y z
spacin the model nums listed above.
Options scripty z
Mode:
Ena
Logi
mal Design
Pin St
Feature Set
C - Encased with
Threaded
S - Standard
F - Current
Sharing /
Baseplate
K - 0
N - 0.145"
Neg- 0.180"
0.250"
W - B
Boost
D - Encased with
Non-Tded
Base
V - Eased
Flaged Ba
The first 12 characters comprise the base part number and
the last 3 characters indicate available options. The “-G”
suffix indicates 6/6 RoHS compliance.
Trimmable
current limit
Application Notes
A variety of application notes and technicl white papers can
be downloaded in pdf format from r website.
Nall combinatake valid part numbers, please contact
SynQor for availabilitSee the Product Summary web page for
more options.
RoHS Compliance: The EU led Roction of Hazardous
Substances) Directive bans the use , Cadmium,
Hexavalent Chromium, Me, PolybromBiphenyls
(PBB), and Polybrominated Dither (PBDE) in Eleal
and Electronic EquipmThis r product is 6/6 R
compliant. For more ation se refer to SynQor
RoHS addendum available RoHS ompliancLead Free
PNTS
SynQor holds the following U.S. patents, one or more of which apply to
h product listed in this document. Additional patent applications may be
ing or filed in the future.
Initiative web e or e-mail ohs@synqo
.
5,999,417
6,731,520
7,072,190
7,272,023
6,222,742
6,894,468
7,085,146
7,558,083
6,545,890
6,896,526
7,119,524
7,564,702
6,577,109
6,927,987
7,269,034
7,765,687
6,594,159
7,050,309
7,272,021
7,787,261
Contact SynQor frther information:
Phone:
Toll Free-888-5596
Fa
978-0600
Warranty
SynQor offers a three (3) year limited warranty. Complete warranty
information is listed on our website or is available upon request from SynQor.
78-849-0602
E-mai
Web:
power@synqor.com
ww.synqor.com
Information furnished by SynQor is believed to be accurate and reliable.
However, no responsibility is assumed by SynQor for its use, nor for any
infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any
patent or patent rights of SynQor.
Address: 55 Swanson Road
Boxborough, MA 01719
USA
Product # NQ20x20HGx80
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0006100 Rev. 1
05/13/11
Page 7
相关型号:
NQ20T20HGD80NNF-G
DC-DC Regulated Power Supply Module, 1 Output, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-10
SYNQOR
NQ20T20HGD80NRF-G
DC-DC Regulated Power Supply Module, 1 Output, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-10
SYNQOR
NQ20T20HGD80NRS-G
DC-DC Regulated Power Supply Module, 1 Output, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-10
SYNQOR
NQ20T20HGV80NKF-G
DC-DC Regulated Power Supply Module, 1 Output, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-10
SYNQOR
NQ20T20HGV80NKS-G
DC-DC Regulated Power Supply Module, 1 Output, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-10
SYNQOR
NQ20T20HGV80NNF-G
DC-DC Regulated Power Supply Module, 1 Output, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-10
SYNQOR
NQ20T20HGV80NRF-G
DC-DC Regulated Power Supply Module, 1 Output, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-10
SYNQOR
NQ20T20HGV80NRS-G
DC-DC Regulated Power Supply Module, 1 Output, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-10
SYNQOR
NQ20T20HGV80NYF-G
DC-DC Regulated Power Supply Module, 1 Output, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-10
SYNQOR
©2020 ICPDF网 联系我们和版权申明