P1224MC [SYSTEMSENSOR]
Selectable Output Strobe and Horn Strobes; 可选的输出选通和喇叭频闪灯
| 型号： | P1224MC |
| 厂家： | 
SYSTEMSENSOR ADVANCED IDEAS. |
| 描述： | Selectable Output Strobe and Horn Strobes |
| 文件： | 总4页 (文件大小：257K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
A u d i b l e / V i s i b l e
N o t i f i c A t i o N
Selectable Output Strobe
and Horn/Strobes
Models Available
Strobes
P1224MC Horn/Strobe
Redꢀ
White
S1224MCꢀ
S1224MCPꢀ
S1224MCK
S1224MCSP
S1224MCW
S1224MCPW
Horn/Strobes
Redꢀ
White
P1224MCꢀ
P1224MCPꢀ
P1224MCK
P1224MCSP
P1224MCW
P1224MCPW
Horns
Redꢀ
White
S1224MC Strobe
H12/24ꢀ
H12/24K
H12/24W
Product Overview
SpectrAlert® Selectable Output Horns, Strobes, and Horn/Strobes offer enhanced fea-
tures that include the widest range of candela options available and the capability to
recognize and self-adjust for either 12 or 24 volt operation. With an overall feature
set that combines performance, installation ease, flexibility, and a consistent,
aesthetically pleasing appearance, the SpectrAlert Selectable Output devices
provide both the innovation and efficiency synonymous with the SpectrAlert name.
Operates on either 12V or 24V
Widest range of candela options:
12V: 15 and 15/75 candela
24V: 15, 15/75, 30, 75, 110 candela
Easy candela selection
Lower current draw
Performance. SpectrAlert selectable output wall-mount horns, strobes, and horn/strobes
offer key performance features long associated with the SpectrAlert name. The select-
able candela strobes and horn/strobes offer average current draws that are not only
lower than conventional fixed-candela SpectrAlert products, but also lower than similar
selectable candela products. By consuming less current, the ability to connect even more
devices per loop is possible, resulting in a lower installed cost.
Easy DIP switch selection for horn
options
Easy mounting with QuickClick™
Synchronizable with MDL
Sync•Circuit™ module
Installation. SpectrAlert selectable output horns, strobes, and horn/strobes offer the
same installation-friendly features synonymous with the SpectrAlert name, such as the
option of 2- and 4-wire operation; the ability to use standard size backboxes with no
encroachment into the box; and universal mounting incorporating the labor-saving
QuickClick™ feature. Such labor-savings features make wire connections simple and fast,
further reducing installed cost.
Meets UL1971, NFPA72, and ADA
signaling requirements
All strobe and horn/strobe models incorporate
a new patented voltage booster design that has
a more consistent flash bulb voltage over the
range of candela selections. The benefit to the
customer is a high quality strobe device.
Flexibility. SpectrAlert selectable output strobes and horn/strobes offer the broadest
range of candela options. In addition, the selectable output strobes and horn/strobes
can operate on either 12V or 24V, with no setting required; the device recognizes and
self-adjusts to the correct current automatically. Temporal 3 or Continuous tone options
continue to be available, in either an Electromechanical or 3kHz pattern.
S5512
Aesthetics. SpectrAlert selectable output horns, strobes, and horn/strobes incorporate
the same stylish, low profile design of the conventional SpectrAlert products, for a con-
sistent and aesthetically pleasing appearance across the entire product line.
7125-1209:222
S4011
7135-1209:223
122-02-E
126-02-E
3014150
Engineering Specifications
General
fire protective service. Horn/strobe shall be wired as a primary
signaling notification appliance and comply with the Americans
with Disabilities Act requirements for visible signaling appliances,
flashing at 1Hz over the strobe’s entire operating voltage range.
The strobe light shall consist of a xenon flash tube and associated
lens/reflector system. The horn shall have two tone options, two
audibility options (at 24 volts) and the option to switch between
a temporal 3 pattern and a non-temporal continuous pattern.
Strobes shall be powered independently of the sounder with the
removal of factory installed jumper wires. The horn on horn/
strobe models shall operate on a coded or non-coded power sup-
ply (the strobe must be powered continuously).
SpectrAlert horns, strobes and horn/strobes shall be capable of
mounting to a standard 4˝ × 4˝ × 11/2˝ back box or a single gang
2˝ × 4˝ × 17/8˝ back box using the universal mounting plate
included with each SpectrAlert product. Also, SpectrAlert prod-
ucts, when used in conjunction with the accessory Sync•Circuit
Module, shall be powered from a non-coded power supply
and shall operate on 12 or 24 volts. 12 volt rated devices shall
have an operating voltage range of 9–17.5 volts. 24-volt rated
devices shall have an operating voltage range or 17–33 volts.
SpectrAlert products shall have an operating temperature of
32° to 120°F and operate from a regulated DC or full wave
rectified, unfiltered power supply.
Synchronization Module
Strobe
Module shall be a System Sensor Sync•Circuit _______ listed
to UL 464 and shall be approved for fire protective service. The
module shall synchronize SpectrAlert strobes at 1Hz and horns
at temporal 3. Also, the module shall silence the horns on horn/
strobe models, while operating the strobes, over a single pair of
wires. The module shall be capable of mounting to a 411/16˝ ×
411/16˝ × 21/8˝ back box and shall control two Style Y (class B) or
one Style Z (class A) circuit. Module shall be capable of multiple
zone synchronization by daisy chaining multiple modules together
and re-synchronizing each other along the chain. The module
shall not operate on a coded power supply.
Strobe shall be a System Sensor SpectrAlert Model _______
listed to UL 1971 and be approved for fire protective service. The
strobe shall be wired as a primary signaling notification appliance
and comply with the Americans with Disabilities Act require-
ments for visible signaling appliances, flashing at 1Hz over the
strobe’s entire operating voltage range. The strobe light shall con-
sist of a xenon flash tube and associated lens/reflector system.
Horn/Strobe Combination
Horn/Strobe shall be a System Sensor SpectrAlert Model
_______ listed to UL 1971 and UL 464 and shall be approved for
Specifications
WalkꢀTest
Weight,ꢀhornꢀonly
7.2ꢀoz.
Voltages
SpectrAlertꢀhorn/strobeꢀandꢀhornꢀonlyꢀ
workꢀonꢀ“walkꢀtests”ꢀwithꢀtimeꢀdura-
tionsꢀofꢀ4ꢀsecondsꢀorꢀgreater
12ꢀorꢀ24VDCꢀandꢀFWR1ꢀunfiltered
Weight,ꢀstrobeꢀandꢀhorn/strobe
8.8ꢀoz.
Operatingꢀvoltageꢀrange
12V:ꢀ8–17.5V;ꢀ24V:ꢀ16–33V
InputꢀTerminals
12ꢀtoꢀ18ꢀAWG
Mounting
4˝ꢀ×ꢀ4˝ꢀ×ꢀ11/2˝ꢀorꢀ2˝ꢀ×ꢀ4˝ꢀ×ꢀ17/8˝ꢀꢀ
standardꢀboxes
Operatingꢀvoltageꢀrangeꢀ(withꢀ
Sync•Circuitꢀmodule,ꢀMDL)2ꢀ
12V:ꢀ9–17.5V;ꢀ24V:ꢀ17–33V
Dimensions
Strobeꢀandꢀhorn/strobeꢀwithꢀuniversalꢀ
plateꢀ
OperatingꢀTemperatureꢀ(Indoor)ꢀ
32°Fꢀtoꢀ120°Fꢀ(0°Cꢀtoꢀ49°C)
U.S.ꢀPatentꢀNumbersꢀ
5,593,569ꢀ
5,914,665ꢀ
5˝ꢀ×ꢀ55/8˝ꢀ×ꢀ215/16˝
Maximumꢀhumidityꢀ(Indoor)
95%ꢀasꢀtestedꢀperꢀUL464
Strobeꢀandꢀhorn/strobeꢀwithꢀsmallꢀ
footprintꢀplateꢀꢀ
33/8˝ꢀ×ꢀ55/8˝ꢀ×ꢀ25/16˝
6,049,446
Outdoorꢀ(KꢀSeries)ꢀOperatingꢀTemperature
–40°Fꢀtoꢀ151°Fꢀ
(–40°Cꢀtoꢀ66°C)
Hornꢀwithꢀuniversalꢀmountingꢀplateꢀ
5˝ꢀ×ꢀ55/8˝ꢀ×ꢀ15/16˝
Hornꢀwithoutꢀmountingꢀplateꢀ
215/16˝ꢀ×ꢀ55/16˝ꢀ×ꢀ15/16˝
Outdoorꢀrating
NEMAꢀ3Rꢀ(perꢀULꢀ50)
Notes:
1.ꢀFullꢀWaveꢀRectifiedꢀ(FWR)ꢀvoltageꢀisꢀaꢀnon-regulated,ꢀtime-varyingꢀpowerꢀsourceꢀthatꢀisꢀusedꢀonꢀsomeꢀpowerꢀsupplyꢀandꢀpanelꢀoutputs.
2.ꢀTheꢀMDLꢀcausesꢀaꢀone-voltꢀvoltageꢀdropꢀinꢀtheꢀnotificationꢀapplianceꢀcircuit.
24VDCꢀ2-wireꢀhorn/strobeꢀcurrentꢀdrawꢀisꢀshownꢀinꢀTableꢀ
1-D.
5.ꢀ
Currentꢀdrawꢀforꢀotherꢀhorn/strobeꢀpowerꢀsuppliesꢀcanꢀbeꢀ
calculatedꢀbyꢀaddingꢀtheꢀstrobeꢀcurrentꢀinꢀTableꢀ1-Aꢀtoꢀtheꢀ
hornꢀcurrentꢀinꢀTableꢀ1-Bꢀfromꢀtheꢀchosenꢀsettings.
1.ꢀ
2.ꢀ
3.ꢀ
4.ꢀ
Currentꢀdrawꢀforꢀstrobe-onlyꢀproductsꢀisꢀshownꢀinꢀTableꢀ1-A.
Currentꢀdrawꢀforꢀhorn-onlyꢀproductsꢀisꢀshownꢀinꢀTableꢀ1-B.ꢀ
12VDCꢀ2-wireꢀhorn/strobeꢀcurrentꢀisꢀshownꢀinꢀTableꢀ1-C.
Table 1-A: SpectrAlert Strobe UL Max. Current Draw
Explanation of Published Voltage, Current, and SPL
Specifications
FWR Operating
Current–Strobe
(mA RMS)
DC Operating
Current–Strobe
(mA RMS)
In May 2004 Underwriters Laboratories changed standard
UL 1971 to require that operating current measuremments
are made using RMS (root mean square) instead of peak
or average values. RMS measurements more accurately
predict the power consumption of a device since they take
into account the entire current draw profile including surge,
repetitive surge, and peak values. The published RMS cur-
rent is the maximum operating current of that device within
its operating voltage range. This current maximum may or
may not occur at the endpoints of the voltage range.
Candela
Setting
8-17.5V
16-33V
8-17.5V
16-33V
59
69
15
112
135
64
74
127
127
15/75
30
93
90
75
158
208
160
209
110
Table 1-B: Horn UL Max. Current Draw Measurements (mA RMS)
DC
FWR
Similarly, UL tests the audibility of devices in accordance
with UL 464 by measuring them across the operating volt-
age range to determine the minimum sound pressure level
produced at any particular setting.
Selectable Horn Tones
8-17.5V 16-33V 8-17.5V 16-33V
Temporal Low
Electromechanical
15
15
36
43
16
16
38
44
23
33
53
57
37
32
49
56
13
13
20
21
19
18
46
42
23
23
44
40
29
33
49
58
Volume
3000ꢀHzꢀInterrupted
Electromechanical
3000ꢀHzꢀInterrupted
Electromechanical
3000ꢀHzꢀInterrupted
Electromechanical
3000ꢀHzꢀInterrupted
High
Volume
During May 2004, UL also changed the way they list the
voltage range of a device. All 12V products will be listed
between 8 – 17.5V and all 24V products will be listed
between 16 – 33V. Those devices are considered “regulat-
ed”. Any product that does not operate within these ranges
will be listed as a “special application” with its operating
voltage specified on the device.
Non-
Low
Temporal Volume
High
Volume
Table 1-C: 12VDC Horn/Strobe UL Max. Current Draw
Measurements (mA RMS)
Notes
Temporal
Low Volume
High Volume
Candela
Setting
Electromechanical
3000 Hz
Electromechanical
3000 Hz
15
111
127
111
127
112
126
112
129
15/75
Non-Temporal
15
113
128
112
128
114
130
115
134
15/75
SpectrAlert Strobe Candela Selections
Table 1-D: 24VDC Horn/Strobe UL Max. Current Draw
Measurements (mA RMS)
Forꢀstrobeꢀcandelaꢀselection,ꢀadjustꢀslideꢀswitchꢀlocatedꢀonꢀtheꢀ
rearꢀofꢀtheꢀproductꢀwhileꢀwatchingꢀtheꢀviewingꢀwindowꢀonꢀtheꢀ
sideꢀofꢀtheꢀreflector.
Temporal
Low Volume
High Volume
Candela
Setting
Electromechanical
3000 Hz
Electromechanical
3000 Hz
Permissible Candela Settings
Candela
Setting
Operating Voltage
15
15/75
30
71
86
70
85
73
87
75
88
12V
OK
24V
OK
OK
OK
OK
OK
15
99
98
100
167
210
100
170
213
15/75
30
OK
75
166
209
166
209
110
75
Non-Temporal
110
Viewing Window
15
15/75
30
74
86
74
88
79
93
82
96
A0133-00
101
167
213
101
167
213
107
173
218
110
176
222
75
110
©ꢀ2005ꢀSystemꢀSensor.ꢀTheꢀcompanyꢀreservesꢀtheꢀrightꢀtoꢀchangeꢀproductꢀspecificationsꢀwithoutꢀnotice.ꢀ
A05-0325-006•9/05•#1526
SpectrAlert Horn Sound Measurements (dBA)
Typical weatherproof mounting with universal plate
Plate
WBB
#8-36 x 1/2˝ Flat Head
Screw (4 total)
8-17.5V
16-33V
Selectable Horn Tones
Temporal
Low
Volume
Electromechanical
67
68
71
72
71
72
76
77
75
75
80
81
79
79
84
86
3000ꢀHzꢀInterrupted
Electromechanical
3000ꢀHzꢀInterrupted
Electromechanical
3000ꢀHzꢀInterrupted
Electromechanical
3000ꢀHzꢀInterrupted
High
Volume
Non-
Temporal
Low
Volume
High
Volume
Gasket
Conduit
Slot
Entrance
Locking Rib
A0135-02
Paper Liner
For Plate
Gasket
DIP Switch Operation on P1224MC
Factory
Default
DIP Switch
OFF
ON
Low
High
Temporal
Non-Temporal
3000Hz
Electromech.
Base (rear)
A0110-00
SpectrAlert Ordering Information
Model
Description
Model
Description
H12/24
H12/24W
H12/24K
Accessories
MDL
Horn,ꢀ12/24ꢀvolt,ꢀred
P1224MC
P1224MCW
P1224MCP
SelectableꢀOutputꢀHorn/Strobe,ꢀ12/24ꢀvolt,ꢀred
SelectableꢀOutputꢀHorn/Strobe,ꢀ12/24ꢀvolt,ꢀwhite
Horn,ꢀ12/24ꢀvolt,ꢀwhite
Horn,ꢀ12/24ꢀvolt,ꢀred,ꢀoutdoor
SelectableꢀOutputꢀHorn/Strobe,ꢀ12/24ꢀvolt,ꢀred,ꢀ
plainꢀhousing
P1224MCPW
P1224MCK
P1224MCSP
SelectableꢀOutputꢀHorn/Strobe,ꢀ12/24ꢀvolt,ꢀ
white,ꢀplainꢀhousing
Sync•CircuitꢀModule,ꢀred
Sync•CircuitꢀModule,ꢀwhite
MDLW
SelectableꢀOutputꢀHorn/Strobe,ꢀ12/24ꢀvolt,ꢀred,ꢀ
outdoor
MDLWA
S-MP
Sync•CircuitꢀModule,ꢀwhite,ꢀCanadianꢀmodel
SelectableꢀOutputꢀHorn/Strobe,ꢀ12/24ꢀvolt,ꢀred,ꢀ
“FUEGO”ꢀhousing
SmallꢀFootprintꢀMountingꢀPlate,ꢀred,ꢀforꢀsingle-
gangꢀbackꢀbox
S1224MC
SelectableꢀOutputꢀStrobe,ꢀ12/24ꢀvolt,ꢀred
SelectableꢀOutputꢀStrobe,ꢀ12/24ꢀvolt,ꢀwhite
S-MPW
SmallꢀFootprintꢀMountingꢀPlate,ꢀwhite,ꢀforꢀsingle-
gangꢀbackꢀbox
S1224MCW
S1224MCP
BBS
SurfaceꢀMountꢀBackꢀBoxꢀSkirt,ꢀred
SurfaceꢀMountꢀBackꢀBoxꢀSkirt,ꢀwhite
UniversalꢀMountingꢀPlateꢀ(replacement),ꢀred
UniversalꢀMountingꢀPlateꢀ(replacement),ꢀwhite
WeatherproofꢀBackꢀBox
SelectableꢀOutputꢀStrobe,ꢀ12/24ꢀvolt,ꢀred,ꢀplainꢀ
housing
BBSW
D-MP
D-MPW
WBB
S1224MCPW
S1224MCK
S1224MCSP
SelectableꢀOutputꢀStrobe,ꢀ12/24ꢀvolt,ꢀwhite,ꢀ
plainꢀhousing
SelectableꢀOutputꢀStrobe,ꢀ12/24ꢀvolt,ꢀred,ꢀ
outdoor
SelectableꢀOutputꢀStrobe,ꢀ12/24ꢀvolt,ꢀred,ꢀ
“FUEGO”ꢀhousing
Notes
All of these SpectrAlert products are designed for wall mount only. All outdoor models must use weatherproof back box model WBB. Installation of
less than 75 candela strobes may be permissible under the equivalent facilitation clause of the ADAAG (Sec. 2.2). However, it is the responsibility of
the person or entity designing the fire alarm system to determine the acceptability of less than 75 candela strobes. All 15/75 candela strobes or horn/
strobes are recommended for 20′ × 20′ rooms or less.
System Sensor Sales and Service
System Sensor Headquarters
3825ꢀOhioꢀAvenueꢀ
St.ꢀCharles,ꢀILꢀ60174ꢀ
Ph:ꢀ800/SENSOR2ꢀ
Fx:ꢀ630/377-6495ꢀꢀ
www.systemsensor.com
System Sensor Canada
Ph:ꢀ905.812.0767ꢀꢀ
Fx:ꢀ905.812.0771
System Sensor in China
Ph:ꢀ86.29.8832.0119ꢀꢀ
Fx:ꢀ86.29.8832.5119
System Sensor – Far East
Ph:ꢀ85.22.191.9003ꢀꢀ
Fx:ꢀ85.22.736.6580
System Sensor – India
Ph:ꢀ91.124.237.1770ꢀx.2700
Fx:ꢀ91.124.237.3118
System Sensor Europe
Ph:ꢀ44.1403.276500ꢀꢀ
Fx:ꢀ44.1403.276501
System Sensor in Singapore
Ph:ꢀ65.6273.2230ꢀꢀ
Fx:ꢀ65.6273.2610
System Sensor – Australia
Ph:ꢀ613.54.281.142ꢀꢀ
Fx:ꢀ613.54.281.172
System Sensor – Russia
Ph:ꢀ70.95.937.7982
Fx:ꢀ70.95.937.7983
相关型号：
©2020 ICPDF网 联系我们和版权申明