RRS-MOD [SYSTEMSENSOR]
Synchronization Module; 同步模块型号: | RRS-MOD |
厂家: | SYSTEMSENSOR ADVANCED IDEAS. |
描述: | Synchronization Module |
文件: | 总2页 (文件大小:89K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
C O N V E N T I O N A L
D E T E C T I O N
Series Reversing Relay/
Synchronization Module
Model
RRS-MOD
RRS-MOD
Reversing relay/synchronization module
3
for i series sounder models
Product Overview
Compatible with 2- and 4-wire i3 detec-
System Sensor’s RRS-MOD reversing relay/synchronization module enhances the
operation of 2- and 4- wire i3 series detectors equipped with a sounder.
tors equipped with a sounder
Activates all i3 sounders on a loop when
one alarms
Installation ease. The RRS-MOD includes a Velcro attachment for easy installa-
tion into the fire alarm control panel cabinet. A quick-connect harness and
color-coded wires simplify connections.
Synchronizes all i3 sounders on the loop
for a clear alarm signal
Intelligence. The RRS-MOD’s design is flexible to accommodate virtually any
application. The RRS-MOD is compatible with both 2- and 4-wire i3 series
detectors operating over 12V and 24V systems. The module can be used with
either bell/alarm, alarm relay, or NAC outputs, and its field-selectable switch
accommodates both coded and continuous alarm signals.
Can be used with bell/alarm, alarm relay,
or NAC outputs
Includes a field-selectable switch to
accommodate both coded and continu-
ous alarm signals
Instant inspection. To meet fire alarm requirements, the RRS-MOD activates all
i3 sounders on a loop when one alarms. Additionally, the RRS-MOD synchro-
nizes the output of the i3 sounders, regardless of whether the panel’s alarm sig-
nal is continuous or coded, to ensure a clear alarm signal.
Allows i3 detector silencing from the
panel or keypad
Operates on 12- and 24-volt systems
Quick-connect harness and color coded
wires facilitate connections
Architect/Engineer Specifications
Reversing relay/synchronization module
shall be a System Sensor i3 Series model
number RRS-MOD, listed to Underwriters
Laboratories as a smoke detector accessory.
The module shall allow all 2-wire and 4-
wire i3 Series detectors equipped with a
sounder on a loop to sound when one
alarms. The module shall provide a switch
to toggle between coded mode and continu- either coded or continuous modes, the
ANSI S3.41 temporal coded pattern. In
ous mode. When in coded mode, the mod-
ule shall synchronize the i3 sounders on the
loop to mirror the input signal. When in
continuous mode, the module shall syn-
chronize the i3 sounders on the loop to the
RRS-MOD module shall permit sounders
to be silenced at the panel. The RRS-MOD
module shall operate between 8.5 and 35
VDC, and shall provide 18 AWG stranded,
tinned conductors connected to a quick-
connect harness.
Electrical Specifications
Operating Voltage
Avg. Operating Current
25mA
Relay Contact Rating
2 A @ 35 VDC
Nominal:
Min.:
12 / 24 V
8.5 V
Max.:
35 V
Physical Specifications
Operating Temperature Rangez
32°F–131°F (0°C–55°C)
Operating Humidity Range
5% to 85% non-condensing
Wire Connections
18 AWG stranded, tinned, 16″ long
Dimensions
Height:
Width:
Depth:
2.5 inches (63 mm)
2.5 inches (63 mm)
1 inch (25 mm)
2-Wire System Triggered from Alarm/Bell Circuit:
UL LISTED
ALARM
CONTROL
PANEL
BELL/
ALARM
CIRCUIT
PURPLE
T+
(positive signal
in alarm state)
EOL
BROWN
OUT+
1 + IN
1 + IN
YELLOW
2–WIRE
INITIATING
DEVICE
+
–
2 + OUT
3 - IN/OUT
4 RA+
2 + OUT
3 - IN/OUT
4 RA+
IN+
ORANGE
IN–
CIRCUIT
WHITE
OUT–
5 RA-
5 RA-
+
–
+
–
RED
PWR+
+
–
NOTE:
AUX POWER
OPTIONAL
REMOTE
OPTIONAL
REMOTE
BLACK
PWR–
These diagrams represent
two common wiring methods.
Refer to the RRS-MOD
installation manual for addi-
tional wiring configurations.
ANNUNCIATOR
(RA400Z)
ANNUNCIATOR
(RA400Z)
S0101-00
UL LISTED
ALARM
2-Wire System Triggered from Alarm Relay Contact:
CONTROL
PANEL
ALARM
RELAY
(NO Contact)
PURPLE
T+
EOL
BROWN
OUT+
1 + IN
1 + IN
YELLOW
2–WIRE
INITIATING
DEVICE
+
–
2 + OUT
3 - IN/OUT
4 RA+
2 + OUT
IN+
ORANGE
IN–
3 - IN/OUT
4 RA+
CIRCUIT
WHITE
OUT–
5 RA-
5 RA-
+
–
+
–
RED
PWR+
+
–
AUX POWER
OPTIONAL
REMOTE
OPTIONAL
REMOTE
BLACK
PWR–
ANNUNCIATOR
(RA400Z)
ANNUNCIATOR
(RA400Z)
S0103-00
Ordering Information
Model
Description
Reversing relay/synchronization module for i3 series smoke detectors
RRS-MOD
System Sensor Sales and Service
System Sensor Headquarters
3825 Ohio Avenue
St. Charles, IL 60174
Ph: 800/SENSOR2
Fx: 630/377-6495
Documents-on-Demand
800/736-7672 x3
System Sensor Canada
Ph: 905.812.0767
Fx: 905.812.0771
System Sensor in China
Ph: 86.29.524.6253
Fx: 86.29.524.6259
System Sensor – Far East
Ph: 85.22.191.9003
Fx: 85.22.736.6580
System Sensor – India
Ph: 91.124.637.1770 x.2700
Fx: 91.124.637.3118
System Sensor Europe
Ph: 44.1403.276500
Fx: 44.1403.276501
System Sensor in Singapore
Ph: 65.6273.2230
Fx: 65.6273.2610
System Sensor – Australia
Ph: 613.54.281.142
Fx: 613.54.281.172
www.systemsensor.com
©2002 System Sensor. The company reserves the right to change product specifications without notice.
A05-0350-000•11/02•#990
相关型号:
RRS040P03TB
Power Field-Effect Transistor, 4A I(D), 30V, 0.075ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, SOP-8
ROHM
RRS070N03TB
Power Field-Effect Transistor, 7A I(D), 30V, 0.04ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, SOP-8
ROHM
RRS090N03TB
Small Signal Field-Effect Transistor, 9A I(D), 30V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, SOP-8
ROHM
RRS100N03TB
Small Signal Field-Effect Transistor, 10A I(D), 30V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, SOP-8
ROHM
RRS110N03TB
Power Field-Effect Transistor, 11A I(D), 30V, 0.016ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, SOP-8
ROHM
©2020 ICPDF网 联系我们和版权申明