FN3416LV-90-35 [Schaffner]
Ecosine Low-Voltage Economy Line of Passive Harmonic Filters;型号: | FN3416LV-90-35 |
厂家: | Schaffner International Ltd |
描述: | Ecosine Low-Voltage Economy Line of Passive Harmonic Filters |
文件: | 总6页 (文件大小:851K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Economy Line (10% THID) FN 3416 LV
DATASHEET
Ecosine Low-Voltage Economy Line of Passive Harmonic Filters
Economy line of passive harmonic filters for
THID <7%
Approvals
Help to comply with EN 61000-3-12, IEEE-519
and other PQ standards
Support an efficient utilization of electrical
system capacity
Ideal for AC or DC motor drives with 6-pulse
rectifier front-end
Features and benefits
Suitable for 200-240 V diode and thyristor (SCR)
rectifiers applications
FN 3416 LV (50 Hz) models of the ECOsine product
family represent the very compact “economy line”
with a THID performance of ≤7% (with Ldc).
The performance is still sufficient to comply with EN
61000-3-12 or with IEEE-519 for Isc/IL <50. Schaffner
ECOsine filters help to unburden the electrical
infrastructure from excess loading and heat caused
by current harmonics, and therefore support a better
utilization of electric system capacity.
Performance indicators
Lower harmonics also reduce the risk of system
resonances and potential downtime of sensitive
electronic equipment.
FN 3416 LV filters upgrade standard motor drives to
“low-harmonic drives” quickly and easily.
Typical applications
Three-phase power conversion equipment with
front-end six-pulse rectifier (diode or SCR)
Technical specifications
Motor drives, like those used e.g. in pump and fan
applications
Battery chargers, incl. DC fast chargers for e-cars
3x 200 to 240 VAC ±10%
50Hz ±1 Hz (FN 3416 LV)
Nominal operating voltage
Operating frequency
<7% @ rated power (with DC-Link choke)
Total harmonic current distortion THID*
<13% @ rated power (without DC-Link choke)
2.5 to 90 kW
Nominal motor drive input power rating
Efficiency
Typical electrical schematic
>98% @ nominal line voltage and power
According to IEEE-519
Total demand distortion TDD
High potential test voltage
Protection category
P -> E 2500 VAC (2 sec)
IP 20
Internal fan cooling, unregulated
1.6x rated current for 1 minute, once per hour
Cooling
Overload capability
–25°C to +45°C fully operational
Ambient temperature range
–25°C to +70°C transport and storage
+45°C to +55°C derated operation**
UL 94 V-2 or better
Flammability corresponding to
Design corresponding to
MTBF @ 45°C/500 V (Mil-HB-217F)
SCCR***
UL 508, EN 61558-2-20, CE (LVD 2006/95/EC)
200,000 hours
100 kA
TN, TT, IT
Earthing System
*** System requirements: THVD <2%, line voltage unbalance <1%
*** Note: performance specifications in this datasheet refer to six-pulse diode rectifiers.
*** SCR rectifier front-end will produce different results, depending upon the firing angle of the thyristors.
*** Iderated = Inominal * √(70°C-Tamb)/25°C
*** External UL-rated fuses required.
2
Ecosine passive
Schaffner Group Datasheets 11 Oct 2018
Performance characteristics (for diode rectifiers)
THID – Total harmonic current
distortion
ECOsine high power passive harmonic filter
performance is optimized for rectifiers/motor drives
with a dc-link choke. In such applications, a THID of
roughly 7% can be expected. The use of a dc-link
choke is highly recommended. In a system without
L
dc
a THID of 13% can be expected.
Displacement power factor
At full load, ECOsine filters yield unity power factor.
At lower load levels, the capacitive current into the
power capacitors of the trap circuit cause a leading
displacement power factor. This is the case with all
types of passive filters with large capacitors. However,
compared to traditional filters the useful range of
Schaffner ECOsine is much extended (cos phi >0.9
from 35 to 100% of rated load).
DC-link voltage
ECOsine harmonic filters have a very low impact on
the dc-link voltage of the motor drive. The voltage
boost/buck as a function of load can be seen in the
performance graph beside. Tolerances are kept
narrow in order to ensure that motor drives do not
suffer from nuisance tripping because of under- or
over-voltage situations.
3
Ecosine passive
Schaffner Group Datasheets 11 Oct 2018
Filter selection table
Filter*
Input /output
connections
Weight
Rated load power
@ 220 VAC/50 Hz
Power loss**
@ 25°C/50 Hz
[kW]
2.5
3
[W]
63
[kg]
10
FN 3416 LV-10-44
FN 3416 LV-13-44
FN 3416 LV-16-44
FN 3416 LV-24-33
FN 3416 LV-32-33
FN 3416 LV-38-33
FN 3416 LV-45-33
FN 3416 LV-60-34
FN 3416 LV-75-34
FN 3416 LV-90-35
FN 3416 LV-110-35
FN 3416 LV-150-40
FN 3416 LV-180-40
FN 3416 LV-210-40
FN 3416 LV-260-99
FN 3416 LV-320-99
-44
-44
-44
-33
-33
-33
-33
-34
-34
-35
-35
-40
-40
-40
82
10
4
105
153
294
256
306
408
410
493
546
784
817
887
947
988
15
5.5
7.5
11
15
18.5
22
26
30
37
45
55
75
90
20
22
25
29
37
43
47
50
86
92
100
125
135
-99
-99
*
Filter to be selected by system voltage and load (motor drive) power. Note: the harmonic filter will reduce RMS input current.
Therefore, filter selection by current rating, as it is common for EMC/EMI filters, is not recommended.
** Calculated power loss at rated load power.
Filter application
ECOsine filters are best installed directly at the input of 6-pulse rectifiers. It is possible to connect several non-linear loads (e.g. motor drives) in parallel. In this case the
rating of the filter must match the sum of the power ratings of drives connected to it. The use of a (built-in) DC-link choke is recommended for best harmonics
mitigation performance. If the expected input power exceeds the rating of the largest available filter, and a custom solution is not desired, then two or more filters
can be wired in parallel. In this mode of operation, it is recommended to use filters with equal power ratings to ensure proper current sharing.
4
Ecosine passive
Schaffner Group Datasheets 11 Oct 2018
Mechanical Data
FN 3416 LV-10 to -110
FN 3416 LV-150 to -210
FN 3416 LV-260 to -320
5
Ecosine passive
Schaffner Group Datasheets 11 Oct 2018
Dimensions
10
13
16
24
32
38
45
60
75
90
110
580
280
248
555
225
11
150
700
450
385
665
350
13
180
700
450
385
665
350
13
210
700
450
385
665
350
13
260
700
450
385
665
350
13
320
700
450
385
665
350
13
FN 3416 LV–…
A
B
C
E
390
185
190
370
140
9
390
185
190
370
140
9
390
185
190
370
140
9
455
250
230
435
200
11
455
250
230
435
200
11
455
250
230
435
200
11
455
280
230
435
200
11
520
280
248
500
225
11
520
280
248
500
225
11
580
280
248
555
225
11
F
G
J
M6
M6
M6
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
25
M10
25
V
W
X
Y
Z
6
6
12.5
47
12.5
47
11
11
All dimensions in mm; 1 inch = 25.4 mm
Tolerances according to: ISO 2768-m/EN 22768-m
Filter connector cross sections
–33
–34
–35
–40
–44
2
2
2
2
2
2
2
Solid wire
16 mm
35 mm
50 mm
95 mm
95 mm
10 mm
2
2
2
Flex wire
10 mm
AWG 6
25 mm
AWG 2
50 mm
6 mm
AWG type wire
Recommended torque
AWG 1/0
7–8 Nm
AWG 4/0
AWG 8
1.5–1.8 Nm
4.0–4.5 Nm
17–20 Nm
1.0–1.2 Nm
Please visit www.schaffner.com to find more details on filter connectors.
Installation
For more detailed information and step by step installation guidelines, please consult the user manual at www.schaffner.com or the installation instructions (delivered
with each filter).
6
Ecosine passive
Schaffner Group Datasheets 11 Oct 2018
Headquarters, global
innovation and development
Sales and application centers
Switzerland
China
Spain
Schaffner Group
Nordstrasse 11
Schaffner EMC Ltd. Shanghai
T20-3 C, No 565 Chuangye Road,
Pudong district
Schaffner EMC España
Calle Caléndula 93, Miniparc III, Edificio E
El Soto de Moraleja, Alcobendas
28109 Madrid
4542 Luterbach
T +41 32 681 66 26
info@schaffner.com
www.schaffner.com
201201 Shanghai
T +86 21 3813 9500
cschina@schaffner.com
www.schaffner.com.cn
T +34 917 912 900
F +34 917 912 901
spainsales@schaffner.com
Finland
Sweden
Schaffner Oy
Schaffner EMC AB
Tegeluddsvägen 76, 2tr
115 28 Stockholm
T +46 8 5050 2425
swedensales@schaffner.com
www.schaffner.com
Sauvonrinne 19 H
08500 Lohja
T +358 50 468 7284
finlandsales@schaffner.com
France
Schaffner EMC S.A.S.
16-20 Rue Louis Rameau
95875 Bezons
Switzerland
Schaffner EMV AG
Nordstrasse 11
T +33 1 34 34 30 60
F +33 1 39 47 02 28
francesales@schaffner.com
4542 Luterbach
T +41 32 681 66 26
switzerlandsales@schaffner.com
Germany
Taiwan R.O.C.
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
Schaffner EMV Ltd.
20 Floor-2, No 97, Section 1, XinTai 5th Road
22175 XiZhi District New Taipei City 22175
T +886 2 2697 5500
T +49 721 56910
F +49 721 569110
F +886 2 2697 5533
germanysales@schaffner.com
taiwansales@schaffner.com
www.schaffner.com.tw
India
Schaffner India Pvt. Ltd
REGUS WORLD TRADE CENTRE
WTC, 22nd Floor Unit No 2238, Brigade
Gateway Campus, 26/1, Dr. Rajkumar Road
Malleshwaram (W)
Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muangg P.O. Box 14
51000 Lamphun
560055 Bangalore
T +91 80 67935355
T +66 53 58 11 04
indiasales@schaffner.com
F +66 53 58 10 19
thailandsales@schaffner.com
Italy
Schaffner EMC S.r.l.
Via Ticino, 30
United Kingdom
Schaffner Ltd.
20900 Monza (MB)
T +39 039 21 41 070
italysales@schaffner.com
5 Ashville Way, Molly Millars Lane
To find your local partner within Schaffner‘s
global network: www.schaffner.com
Wokingham
RG41 2PL Berkshire
T +44 118 9770070
F +44 118 9792969
uksales@schaffner.com
© 2018 Schaffner Group
Japan
Schaffner EMC K.K.
1-32-12, Kamiuma, Setagaya-ku
7F Mitsui-seimei Sangenjaya Bldg.
154-0011 Tokyo
The content of this document has been
carefully checked and understood. However,
neither Schaffner nor its subsidiaries assume
any liability whatsoever for any errors or
inaccuracies of this document and the
consequences thereof. Published specifica-
tions are subject to change without notice.
Product suitability for any area of application
must ultimately be determined by the
customer. In all cases, products must never
be operated outside their published
specifications. Schaffner does not guarantee
the availability of all published products. This
disclaimer shall be governed by substantive
Swiss law and resulting disputes shall be
settled by the courts at the place of business
of Schaffner Holding AG. Latest publications
and a complete disclaimer can be downloa-
ded from the Schaffner website. All
trademarks recognized.
USA
Schaffner EMC Inc.
52 Mayfield Avenue
08837 Edison, New Jersey
T +1 800 367 5566
T +1 732 225 9533
F +1 732 225 4789
usasales@schaffner.com
www.schaffnerusa.com
T +81 3 5712 3650
F +81 3 5712 3651
japansales@schaffner.com
www.schaffner.jp
Singapore
Schaffner EMC Pte Ltd.
#05-09, Kg Ubi Ind. Estate
408705 Singapore
Schaffner North America
6722 Thirlane Road
T +65 6377 3283
F +65 6377 3281
24019 Roanoke, Virginia
T +1 276 228 7943
singaporesales@schaffner.com
F +1 276 228 7953
Schaffner North America
823 Fairview Road
24382 Wytheville, Virginia
T +1 276 228 7943
F +1 276 228 7258
相关型号:
©2020 ICPDF网 联系我们和版权申明