TX0104A [TAI-SAW]
SMD 5x3.2 13MHz VCTCXO; SMD 5x3.2 13MHz的VCTCXO
| 型号： | TX0104A |
| 厂家： | 
TAI-SAW TECHNOLOGY CO., LTD. |
| 描述： | SMD 5x3.2 13MHz VCTCXO |
| 文件： | 总5页 (文件大小：192K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
Web: www.taisaw.com
E-mail: tstsales@mail.taisaw.com
Approval Sheet For Product Specification
Issued Date: 4/2/2007 (REV. NO.:5)
Product Name: SMD 5x3.2 13MHz VCTCXO
TST Parts No.: TX0104A
Customer Parts No. :
Company:
Division:
Approved by :
Date:
Checked by:
Approval by:
Date:
CC Hsu
Robert Chang
4/2/2007
TAI-SAW TECHNOLOGY CO., LTD.
FR-71S03-01
TST DCC
Release document
TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
Web: www.taisaw.com
E-mail: tstsales@mail.taisaw.com
SMD 5.0x3.2 13MHz VCTCXO
MODEL NO.: TX0104A
REV. NO.: 5
Features:
RoHS Compliant
Lead free
Lead-free soldering
ꢀ
ꢀ
ꢀ
Miniature SMD Package
Good Frequency Stability
Good Phase Noise Response
Description and Applications:
Surface mount 5.0mmx3.2mmm VCTCXO for use in wireless communications devices
Electrical Specifications:
TX0104A
Specifications
Nominal Frequency, Fo
Storage Temperature Range
Operating Temperature Range
Power Supply Voltage, Vdd
Output Voltage with Load 10pF//10KΩ, Vout
Output Waveform
13.000000 MHz
-40°C to +85°C
-20°C to +75°C
2.8 V
0.8 Vp-p min
Clipped Sinewave
2.0 mA max
Power Supply Current, Icc
Control Voltage, Vcon
1.4 +/- 1.0 V
Frequency Tolerance (Vcon=1.4V) after Reflow
Frequency Stability
a. Vs. Temperature (-20~75°C)
b. Vs. Supply Voltage varied 2.8V+/-5%
c. Vs. Load varied +/-10%
+/- 1.5 ppm max @ 25°C +/- 3°C
+/- 2.5 ppm
+/- 0.2 ppm
+/- 0.2 ppm
Vcon Frequency Control Range (1.4+/-1.0 V)
+/-8 ~ +/-14 ppm/V
Start Up Time (90% of final RF level in Vp-p)
2.0 msec max.
Harmonics
-5.0 dBc max
SSB Phase Noise (@1KHz Carrier Offset)
-130 dBc/Hz max
Laser Marking
Marking
Aging
+/-1.0 ppm/year @25°C
TAI-SAW TECHNOLOGY CO., LTD.
2
TST DCC
Release document
Mechanical Dimensions (mm):
Recommended Circuit
Packing (mm):
1. Reel Dimension
TAI-SAW TECHNOLOGY CO., LTD.
3
TST DCC
Release document
Unit:mm
Dimension
Tolerance
A
B
62
C
21
D
13
T
M
M2
2.00
±0.2
W1
12.4
W2
16.5
±0.2
180
±0.1
2.05
±0.5
2.50
±0.5
±0.5
±0.1
±0.5
+1.0/-0.0
2. Tape Dimension
A
B
D
D1
E
F
P0 P1 P2
T
T2
W
3.81 5.74 1.50 1.50 1.75 5.50 4.00 8.00 2.00 2.24
±0.1 ±0.1 +0.1 +0.1 ±0.1 ±0.1 ±0.1 ±0.1 ±0.05 ±0.1
Dimension
Tolerance
0.292
±0.05
12.00
+0.3/-0.1
Reflow Profile:
300
250
200
150
100
50
0
0
60
120
180
Time (seconds)
240
300
360
Notes of the Usage:
1. Touch the solder iron at 260+/-5 deg C onto the leads for 10+/-2 sec max or touch the
solder at 350+/-5 deg C onto the leads for 3+/-0.5 sec.
2. In the customer’s reflow process, if it will remain some mechanical stress at the soldering
terminals, also make some cracks on the soldering termination. Some cracks will cause
TAI-SAW TECHNOLOGY CO., LTD.
4
TST DCC
Release document
open or short circuit and cause of thermal increasing or smoking. Don’t make any excess
mechanical stress to soldering points.
3. In case of giving a heavy shock to the products, it may make an open or short circuit and
cause of thermal increasing and smoking. To avoid heavy shock impact applying to
products is strictly required.
Notes of the Storage:
1. To keep products under the condition at the room temperature (-5~35 deg C) with normal
humidity (45~75%). Absorption of moisture and dewdrop may make inferiority of
characteristics and a short circuit.
2. Oxidization of terminals shall make the solderability more inferior. Dusts and corrosive gas
will make a cause of the open or short circuit. Keep it in the clean place where is not in
dusty and no corrosive gas.
3. Use the unti-static material to the storage package.
4. Don’t put any excess weight to the TCXO in the storage process.
5. Don’t move the product from the cold place to the hot place in the short time, otherwise it
may make some dew-drop, then a short circuit may happen in case.
6. Storage periods should be maximum 6 months under condition of above item 1 after
delivery from TST factory.
7. Once open the bag, there is possibility of electrical characteristics deterioration due to
absorption of moisture. So, please use parts within 7 days after opening the bag.
8. If you have to keep parts without using after opening the bag, please put the drying agent
in the bag, fold the bag and keep it in the place where temperature and humidity are
controlled (nitrogen atmosphere box etc.)
TAI-SAW TECHNOLOGY CO., LTD.
5
TST DCC
Release document
相关型号：
©2020 ICPDF网 联系我们和版权申明