NI-10M-3011 [TAITIEN]
Double Oven Controlled Crystal Oscillator;型号: | NI-10M-3011 |
厂家: | Taitien |
描述: | Double Oven Controlled Crystal Oscillator |
文件: | 总4页 (文件大小:356K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OurPerformanceYourReputation
Double Oven Controlled Crystal Oscillator
NI-10MHz-3000 Series
NI-10M-3000 Series in 36.3x27.2mm DIP package
NI-10M-3000 Series oscillators are designed for applications where exceptional
frequency stability and timing is required. The NI-10M-3000 units have both excellent
temperature performance and short term stability. These characteristics make the
NI-10M-3000 Series an excellent choice for timing applications requiring holdover of
< 10 uS for 24 hours. A choice of quartz resonators offers a variety of performance
versus cost options to fit most applications.
RoHS Compliant Standard
ELECTRICAL SPECIFICATIONS
1. OUTPUT (PIN = “R.F. OUTPUT”)
Parameter
Min.
Typ.
Max.
Unit
Test Condition
1.1.
1.2.
Frequency
10.000000
MHz
@ +25 ±1°C
after turn on power 30 ±5 minutes
Initial Accuracy
-0.1
+0.1
ppm
≤ 90 days following date code
VCO Input at Center Voltage ±0.001V
1.3.
1.4.
Waveform
Level
Rectangular
HCMOS
“1” level
“0” level
Load
+2.4
45
V
V
+0.3
1.5.
1.6.
1.7.
15
50
pF
%
Duty cycle
Spurious
55
@ +1.65V
-60
dBc
2. FREQUENCY STABILITY
Parameter
Min.
Typ.
Max.
Unit
Test Condition
±0.2, ±0.5
ppb
2.1.
2.2.
Ambient
Aging
Refer to Table 1 : Ordering Information
0 ~ +70
-30 ~ +70
°C
±0.1, ±0.3
±0.1, ±0.3
±20, ±50
ppb
ppb
per day, at time of shipment
after 30 days
Daily
Refer to Table 1 :
Ordering Information
Yearly
ppb
10 Years
±0.1, ±0.2
ppm
2.3.
2.4.
Voltage
-0.2
-20
+0.2
0.007
0.01
ppb
±5% change
ppb/s
ppb/10s
Short term
root Allan variance
2.5.
Warm-up
+20
ppb
referenced to 1 hour
in 5 minutes @ +25 ±1°C
Page 1of 4
Rev(1)05/2015
http://www.taitien.com E-Mail: sales@taitien.com.tw
Specifications subject to change without notice
OurPerformanceYourReputation
Parameter
Min.
Typ.
Max.
Unit
Test Condition
-90
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
@ 1Hz
-120
-138
-148
-155
-158
@ 10Hz
@ 100Hz
@ 1KHz
@ 10KHz
@ 100KHz
2.6.
2.7.
Phase Noise
After 60 minutes from turn on, following 24 hours minimum on
time, and 24 hours maximum off time.
At constant temperature and voltage. Referenced to frequency at
off time
Retrace
-5
+5
ppb
3. ELECTRICAL FREQUENCY ADJUSTMENT (PIN = “VCO INPUT”)
Parameter
Min.
Typ.
Max.
Unit
Test Condition
ppm
ppm
V
VCO @ Min. Voltage
VCO @ Max. Voltage
-0.8
-0.35
Referenced to frequency at nominal
Center Voltage
3.1.
Tuning Range
+0.35
0
+0.8
+2.8
Control Voltage
Slope
3.2.
3.3.
3.4.
3.5.
3.6.
Positive
+1.4
Center Voltage
Linearity
V
%
When not connected, VCO INPUT is internally held at this voltage
-10
50
+10
Input Impedance
kΩ
4. INPUT POWER (PIN = “+VDC”)
Parameter
Min.
Typ.
Max.
Unit
Test Condition
Voltage
+3.135
+3.3
+3.465
2.5
V
A
4.1.
4.2.
4.3.
Current
@ turn on
Steady State
2.5
W
@ +25°C
5. REFERENCE VOLTAGE (PIN = "REFERENCE VOLTAGE")
Parameter
Min.
Typ.
Max.
Units
Test Condition
+2.66
9
+2.8
+2.94
V
kΩ
V
5.1.
5.2.
5.3.
Voltage
Over temperature range in 2.1
Load
-0.0005
+0.0005
Temperature stability
6. ENVIRONMENTAL
Parameter
Reference Std.
Test Condition
Storage Temperature
6.1.
6.2.
-40°C to +85°C
Vibration (non-operating)
MIL-STD-202, Method 201
0.06” Total p-p, 10 to 55 Hz
30g, 11ms, half-sine
MIL-STD-202, Method 213,
Test Condition J
6.3.
Shock (non-operating)
Page 2of 4
http://www.taitien.com E-Mail: sales@taitien.com.tw
Specifications subject to change without notice
Rev(1)05/2015
OurPerformanceYourReputation
Table 1 : ORDERING INFORMATION
Aging Performance
±0.1 ppb/Day ±0.3 ppb/Day
Aging
±20 ppb/Year
±50 ppb/Year
±0.1 ppm/10 Years
±0.2 ppm/10 Years
Ambient
±0.5 ppb
Temp. (°C )
NI-10M-3000
NI-10M-3010
NI-10M-3040
NI-10M-3050
NI-10M-3001
NI-10M-3011
NI-10M-3041
NI-10M-3051
-30°C ~+70oC
±0.2 ppb
±0.5 ppb
±0.2 ppb
0oC~+70oC
Other specifications may be available upon request.
Phase Noise & Short Term Stability Test Data
Page 3of 4
Rev(1)05/2015
http://www.taitien.com E-Mail: sales@taitien.com.tw
Specifications subject to change without notice
OurPerformanceYourReputation
OUTLINE DRAWING
Page 4of 4
http://www.taitien.com E-Mail: sales@taitien.com.tw
Specifications subject to change without notice
Rev(1)05/2015
相关型号:
©2020 ICPDF网 联系我们和版权申明