AH216N555001-T 概述
CHIP ANTENNA 芯片天线
AH216N555001-T 数据手册
通过下载AH216N555001-T数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2009. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
Should you have any question or inquiry on this matter, please contact our sales staff.
notice_e-01
CHIP ANTENNA
REFLOW
■ FEATURES
■ APPLICATIONS
◦ꢀCompact and Low-profile
◦ꢀBluetooth®, Wireless LAN, GPS, WiMAX, ZigBee, UWB
◦ꢀWide bandwidth and High Gain
◦ꢀStable temperature characteristics
■ ORDERING CODE
A F △ 2 1 6 M 2 4 5 0 0 1 - T
❶
❷
❸
❹
❺
❻
❼
❶Type
AH Multilayer Antenna
❸Dimensions (case size)[mm]
❹Special Code
Inverted F
❺Frequency[MHz]
example
❼Packaging
Tape & Reel
216
816
116
316
083
104
122
086
2.5×1.6
8.0×1.6
11.0×1.6
3.2×1.6
8.0×3.0
10.0×4.0
12.0×2.0
8.0×6.0
F
ーT
1575
2450
5550
1574.397~1576.443
2400~2500
AF
Helical Antenna
M
Mono Pole
Mono Pole
(Dual)
N
3100~8000
❷Electrode Code
❻Spec Code
1. Describe Center Frequency
2. Lower Frequency for Dualband
△
With Plating
01~
△=Blank space
S1~ Applicable to AH104F
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
AF 216M Type, AF 816M Type, AF 116M Type
AH 316M Type
AH 083F Type
AH 104F Type
E
AH 122F Type
AH 104N Type
AH 086M Type
Standard Quantity (pcs)
Type
L
W
T
E
a
b
c
Embossed Tape
AF 216M
AF 816M
AF 116M
AH 316M
AH 083F
AH 104F
AH 122F
AH 104N
AH 086M
2.5±0.2
8±0.2
11±0.2
3.2±0.15
8±0.3
10±0.3
12±0.3
10±0.3
8±0.3
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.15
3±0.3
4±0.3
2±0.3
4±0.3
6±0.3
1.6±0.2
1.6±0.2
1.6±0.2
0.5±0.1
1±0.3
1±0.3
0.95±0.3
1±0.3
0.5±0.3
0.5±0.3
0.5±0.3
0.5±0.2
ー
ー
ー
ー
ー
ー
ー
ー
ー
ー
ー
1.0 min.
1±0.3
1±0.3
1±0.3
0.8±0.3
1±0.3
ー
ー
ー
2000
ー
ー
3000
1000
3.1±0.3
2.5±0.3
5.1±0.3
3±0.3
1.8±0.2
1.15±0.3
1±0.3
3.1±0.3
1.5±0.3
ー
2000
1000
1±0.3
Unit : mm (inch)
■ PART NUMBERS
Applications
Ordering Code
AF816M157502
AF116M157502
External Dimensions (mm)
8.0×1.6×1.6
Center Frequency (MHz)
1575
1575
GPS
11.0×1.6×1.6
3.2×1.6×0.5
2.5×1.6×1.6
3.2×1.6×0.5
8.0×3.0×1.0
10.0×4.0×1.0
10.0×4.0×1.0
12.0×2.0×0.95
10.0×4.0×1.0
8.0×6.0×1.0
AH316M157501
AF216M245001
AH316M245001
AH083F245001
AH104F2450S1
AH104F2650S1
AH122F245001
AH104N2450D1
AH086M555001
AH086M555003
1575
2450
2450
W-LAN (2.4GHz)
Bluetooth®
WiMAX (2.5GHz)
ZigBee
2450
2450
2650
2450
W-LAN (2.4GHz/5GHz)
2450/5400
5550
UWB & WiMAX (3.5GHz)
8.0×6.0×1.0
5550
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipantenna01_e-01
148
■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS
Typical Characteristics on Taiyo Yuden evaluation board
●AF 816M157502
+X
11
+X
+Z
ZX-Plane
XY-Plane
+Z
-X
-Z
+Y
-Y
-Y
+X
+Y
-X
Bandwidth: 180MHz
(VSWR: less than 2)
Vertical
polarization
Vertical
polarization
Horizontal
polarization
Horizontal
polarization
1.325
1.575
1.825
+X
-Z
Typical characteristics of VSWR
Typical characteristics of radiation pattern(@1.575GHz)
●AH 116M157502
+X
ZX-Plane
+X
+Z
XY-Plane
-X
-Z
+Y
-Y
Bandwidth:125MHz
(VSWR:less than2)
+Z
-Y
+Y
+X
-X
Vertical
polarization
Vertical
polarization
Horizontal
Horizontal
1.325
1.575
1.825
polarization
polarization
+X
-Z
+Z
Typical characteristics of VSWR
Typical characteristics of radiation pattern(@1.575GHz)
●AH 316M157501
+X
ZX-Plane
+X
XY-Plane
-X
-Z
+Y
-Y
Bandwidth: 90MHz
(VSWR: less than 2)
+X
-X
+Z
-Y
+Y
Vertical
polarization
Vertical
polarization
Horizontal
Horizontal
polarization
1.325
1.575
1.825
polarization
+X
-Z
+Z
Typical characteristics of VSWR
Typical characteristics of radiation pattern(@1.575GHz)
●AF 216M245001
+X
+X
+Z
XY-Plane
-X
ZX-Plane
-Z
+Y
+Y
-Y
-Y
+X
-X
440MHz
Vertical
polarization
Vertical
polarization
Horizontal
polarization
Horizontal
polarization
+X
-Z
+Z
Typical characteristics of VSWR
Typical characteristics of radiation pattern(@2.45GHz)
●AH 316M245001
+X
+X
XY-Plane
ZX-Plane
-X
-Z
+Y
+Y
-Y
-Y
+X
-X
BandwBiadnthd:wmidothre: 1th9a0nM1H7z0MHz
(VSWR: less than 2)
+Z
Vertical
polarization
Vertical
polarization
Horizontal
polarization
Horizontal
polarization
2.0
2.5
3.0
+X
-Z
Typical characteristics of VSWR
Typical characteristics of radiation pattern(@2.45GHz)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipantenna01_e-01
149
■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS
Typical Characteristics on Taiyo Yuden evaluation board
●AH 083F245001
ZX-Plane
+X
+X
+Z
XY-Plane
+Z
-X
-Z
+Y
-Y
+X
-X
-Y
+Y
Bandwidth:150MHz
2
Vertical
polarization
Vertical
polarization
Horizontal
polarization
Horizontal
polarization
+X
-Z
+Z
Typical characteristics of VSWR
Typical characteristics of radiation pattern(@2.45GHz)
●AH 104F2450S1
ZX-Plane
+X
+X
+X
+X
+Z
XY-Plane
-X
-Z
+Y
-Y
+X
-X
-Y
+Y
300MHz
Vertical
polarization
Vertical
polarization
Horizontal
polarization
Horizontal
polarization
+X
-Z
+Z
Typical characteristics of VSWR
Typical characteristics of radiation pattern(@2.45GHz)
●AH 122F245001
+X
ZX-Plane
XY-Plane
-X
-Z
+Y
-Y
+X
-X
+Y
+Z
-Y
150MHz
2
Vertical
polarization
Vertical
polarization
Horizontal
polarization
Horizontal
polarization
+X
-Z
+Z
Typical characteristics of VSWR
Typical characteristics of radiation pattern(@2.45GHz)
●AH 104N2450D1
ZX-Plane
+X
+Z
XY-Plane
-X
-Z
+Y
-Y
-X
-Y
+X
+Y
Bandwidth:500MHz
Vertical
polarization
Vertical
polarization
Horizontal
polarization
Horizontal
polarization
+X
-Z
+Z
Typical characteristics of VSWR(2GHz band)
Typical characteristics of radiation pattern(@2.45GHz)
+X
ZX-Plane
XY-Plane
+X
-X
-Z
+Y
+Y
-Y
+Z
-Y
+X
-X
Bandwidth:1200MHz
Vertical
polarization
Vertical
polarization
Horizontal
polarization
Horizontal
polarization
4.9
5.4
5.9
+X
-Z
Typical characteristics of VSWR(5GHz band)
Typical characteristics of radiation pattern(@5.25GHz)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipantenna01_e-01
150
■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS
Typical Characteristics on Taiyo Yuden evaluation board
●AH 086M555001
+X
+Z
+X
ZX-Plane
XY-Plane
+Z
-X
-Z
+Y
+Y
-Y
-Y
+X
-X
Vertical
polarization
Vertical
polarization
Horizontal
Horizontal
2
3
4
5
6
7
8
9
10
polarization
polarization
+X
-Z
+Z
Typical characteristics of VSWR
Typical characteristics of radiation pattern(@3.96GHz)
●AH 086M555003
+X
+X
ZX-Plane
XY-Plane
-X
-Z
+Y
-Y
+Z
-Y
+X
-X
+Y
Vertical
polarization
Vertical
polarization
Horizontal
polarization
2
3
4
5
6
7
8
9
10
Horizontal
polarization
+X
-Z
Typical characteristics of VSWR
Typical characteristics of radiation pattern(@3.96GHz)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipantenna01_e-01
151
■ PACKAGING
①Minimum Quantity
Type
④Leader and Blank Portion
Standard Quantity (pcs)
Embossed Tape
AF216M, AF816M, AF116M, AH104F,
AH122F, AH104N
2000
AH316M
3000
1000
AH083F, AH086M
②Tape Material
⑤Reel size
Type
AF216M
AH316M
A
B
W
T
178±2.0
(7.0±0.08)
50 min.
(2.0 min.)
10.0±1.5
(0.394±0.06)
3.0 max.
(0.12 max.)
AF816M
AH083F
178±2.0
(7.0±0.08)
50 min.
(2.0 min.)
17.0±1.0
(0.67±0.04)
2.5 max.
(0.1 max.)
AF116M, AH104F
AH122F, AH104N
330±2.0
(13.0±0.08)
100±1.0
(3.94±0.04)
25.5±1.0
(1.0±0.04)
3.0 max.
(0.12 max.)
③Taping Dimensions
◦Embossed Tape
330 ± 2.0
(13.0±0.08)
100 ± 1.0
(3.94±0.04)
17.0 ± 1.0
(0.67±0.04)
2.5 max.
(0.1 max.)
AH086M
Unit : mm (inch)
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1~0.7N in the direction of the arrow as
illustrated below.
Chip Cavity
Tape Widthness
Insertion Pitch
F
Tape Thickness MAX.
Type
A
B
C
D
K
T
1.85±0.2
2.75±0.2
8±0.2
3.5±0.1
4±0.1
1.95
(0.077)
0.3
(0.012)
AF216M
AF816M
AF116M
AH316M
AH083F
(0.073±0.008)
(0.108±0.008)
(0.315±0.008)
(0.138±0.004)
(0.157±0.004)
1.95±0.2
(0.077±0.008)
8.4±0.2
(0.331±0.008)
16±0.3
(0.630±0.012)
7.5±0.1
(0.296±0.004)
4±0.1
(0.157±0.004)
2.05
(0.081)
0.35
(0.014)
1.95±0.2
(0.077±0.008)
11.4±0.2
(0.449±0.008)
24±0.3
(0.945±0.012)
11.5±0.1
(0.453±0.004)
4±0.1
(0.157±0.004)
2.05
(0.081)
0.35
(0.014)
1.9±0.2
(0.075±0.008)
3.5±0.2
(0.138±0.008)
8±0.2
(0.315±0.012)
3.5±0.1
(0.138±0.004)
4±0.1
(0.157±0.004)
0.85
(0.033)
0.3
(0.012)
3.35±0.2
(0.132±0.008)
8.35±0.2
(0.329±0.008)
16±0.3
(0.630±0.012)
7.5±0.1
(0.295±0.004)
8±0.1
(0.315±0.004)
1.55
(0.061)
0.3
(0.012)
AH104F,
AH104N
4.35±0.2
(0.171±0.008)
10.35±0.2
(0.407±0.008)
24±0.3
(0.945±0.012)
11.5±0.1
(0.435±0.004)
8±0.1
(0.315±0.004)
1.55
(0.061)
0.3
(0.012)
2.3±0.2
(0.091±0.008)
12.3±0.2
(0.484±0.008)
24±0.3
(0.945±0.012)
11.5±0.1
(0.435±0.004)
4±0.1
(0.157±0.004)
1.45
(0.057)
0.35
(0.014)
AH122F
6.25±0.2
(0.246±0.008)
8.26±0.2
(0.325±0.008)
16±0.3
(0.630±0.012)
7.5±0.1
(0.296±0.004)
12±0.1
(0.473±0.004)
1.3
(0.051)
0.3
(0.012)
AH086M
Unit : mm (inch)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipan_reli_e-01
chipan_reli-PRP1
■ RELIABILITY DATA
1. Operating Temperature Range
Specified Value
-20~+80℃
-40~+85℃
2. Storage Temperature Range
Specified Value
【Test Methods and Remarks】
※with being taped, ー20~+35℃
3. Solderability
Specified Value
At least 90% of Terminal surface immersed is covered by new solder.
【Test Methods and Remarks】
Solder temperature : 230±5℃
Duration
Preconditioning
: 3±1 sec.
: Preheating at 150℃ after immersion into flux.
4. Thermal Shock
Specified Value
Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery after 10 times of 30min.immersion alternately at ー40℃ and 85℃ of temperature,followed by evaluating electrical characteristics.
5. High Temperature Storage Test
Specified Value
Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery under standard condition after 96 hours recovery with 85℃ of temperature, followed by evaluating electrical characteristics.
6. Low Temperature Storage Test
Specified Value
Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery under standard condition after 96 hours recovery with ー40℃ of temperature, followed by evaluating electrical characteristics.
7. Humidity Storage Test
Specified Value
Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery under standard condition after 96 hours recovery with 60℃ of temperature, 90~95% relative humidity followed by evaluating electrical characteristics.
8. Resistance to Reflow
Specified Value
Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
Two times of reflow soldering by recommended profile attached, followed by evaluating electrical characteristics.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipan_reli_e-01
chipan_reli-PRP2
■ PRECAUTIONS
1. PCB Design
◆Land pattern design
Precautions
Please do not arrange the surface and inside layer pattern near the antenna mounting area.
◆Land pattern design
Land pattern dimension examples and recommended antenna land pattern
AF216M/816M/116M
AH316M
Dimensions
Type
L
2.5
8
P
1.5
7
a
AF216M
AF816M
AF116M
3
5
11
10
3
Unit : mm
AH083F
AH104F
AH122F
Technical
Consider-
ations
AH104N
AH086M
2. Soldering
◆Conditions of Reflow soldering (for reference)
・Pb Free Reflow Profile
・Reflow Profilev
Technical
Consider-
ations
※ Components should be preheated to within
100 to 130℃ from soldering temperature.
※ Assured to be reflow soldering for 2 times.
Note : The above profiles are the maximum allow-
able soldering condition, therefore these
profiles are not always recommended.
3. Storage Conditions
◆Storage conditions
1.The Products should not be used in the following environments :
・exposure to special gases such as (C12, NH3, SOx, NOx)
・exposure to volatile gas or inflammable gas
・exposure to a lot of dust
Precautions
・exposure to water or condensation
・exposure to direct sanlight or freezing
2.The Products should be kept in the following conditions :
・Temperature : ー10~+40℃
・Humidity
: 15~85%RH
3.The products should be used within 6 months after delivery. In case of storage over 6 months, solderability shall be checked before actual usage.
■ Please contact our offices for further details of specifications.
All of the standard values listed here are subject to change without notice due to technical improvements.
Therefore, please check the specifications carefully before use.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipan_reli_e-01
chipan_reli-PRP3
AH216N555001-T 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
AH216N5550S1-T | TAIYO YUDEN | CHIP ANTENNA | 获取价格 | |
AH22 | ETC | High Dynamic Range CATV Amplifier | 获取价格 | |
AH22-PCB | ETC | High Dynamic Range CATV Amplifier | 获取价格 | |
AH225-S8G | TRIQUINT | 1W High Linearity InGaP HBT Amplifier | 获取价格 | |
AH225-S8G_15 | TRIQUINT | 1W High Linearity InGaP HBT Amplifier | 获取价格 | |
AH22DUAL-PCB | ETC | High Dynamic Range CATV Amplifier | 获取价格 | |
AH22S | WJCI | High Dynamic Range CATV Amplifier | 获取价格 | |
AH22S-G | WJCI | High Dynamic Range CATV Amplifier | 获取价格 | |
AH22S-PCB | WJCI | High Dynamic Range CATV Amplifier | 获取价格 | |
AH23 | ETC | Analog IC | 获取价格 |
AH216N555001-T 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6