BK0603TS102-T 概述
MULTILAYER CHIP BEAD INDUCTORS (BK SERIES) 多层片状磁珠电感器( BK系列) 数据线路滤波器
BK0603TS102-T 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Active | 包装说明: | EIA STD PACKAGE SIZE 0201, 2 PIN |
Reach Compliance Code: | compliant | ECCN代码: | EAR99 |
HTS代码: | 8504.50.80.00 | 风险等级: | 5.74 |
滤波器类型: | FERRITE CHIP | 高度: | 0.3 mm |
长度: | 0.6 mm | 安装类型: | SURFACE MOUNT |
功能数量: | 1 | 最高工作温度: | 125 °C |
最低工作温度: | -55 °C | 输出阻抗: | 1000 OHM Ω |
包装方法: | TAPE AND REEL | 物理尺寸: | L0.6XB0.3XH0.3 (mm)/L0.024XB0.012XH0.012 (inch) |
宽度: | 0.3 mm | Base Number Matches: | 1 |
BK0603TS102-T 数据手册
通过下载BK0603TS102-T数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
notice_e-01
◦-55~125℃
(BK SERIES)
MULTILAYER CHIP BEAD INDUCTORS
WAVE*
REFLOW
*Except for BK0402, BK0603, BK1005, BKH1005
■ FEATURES
■ APPLICATIONS
◦Internal silver printed layer creates a closed circuit which acts as a
◦Hꢀ igh frequency noise countermeasure in personal computers, digital
cameras and other information system products. For use on digital
product clock lines and general signal lines.
magnetic shield minimizing heat generation and crosstalk.
◦No need for grounding provides greater circuit design flexibility.
◦Radiated noise suppression in computer or printer interfaces and har-
ness connectors.
◦Several material types and a broad range of impedance values pro-
vide noise countermeasures for various applications.
◦Noise suppression in video and other AV products.
HS:With low R-XL cross point frequency characteristics and large
resistance part working as damping function, suppresses un-
necessary resonance and keeps signal integrity.
◦Pꢀ revents interference between circuits in cellular phone(s PHS, PDC,
etc.)
HW:With a lower R-XL cross point frequency characteristics than
◦Due to the closed internal circuit which acts as a magnetic shield, the
TS material is extremely effective as a noise filter on LSI power supply
lines where downsizing of components is needed.
those of HS, strongly suppresses unnecessary resonance.
TS :Low DC resistance HS version. For power supply lines .
HM:Resistance part rising exceeding from 20MHz. For general us-
age, especially effective for video signal lines.
■ OPERATING TEMP.
HR:Resistance part rising exceeding from 10MHz. For general us-
age, Wider effective range than that of HM.
LM:With larger impedance set at around 200MHz considering for
noise regulation.
LL :Resistance part steeply rising exceeding from 100MHz. For high
speed signal line, good for clock line, sharply cutting noise off.
◦The small case size lineup with 01005 inch size.
■ ORDERING CODE
B K 1 6 0 8 H S 1 2 1 - T ○
❶
❷
❸
❹
❺
❻
❼
❶Type
Multilayer Chip
Bead Inductor
❷External Dimensions
(L×W)〔mm〕
❸Material
❹Impedance〔Ω〕
example
150
❺Characteristics
Standard Products
❻Packaging
Tape & Reel
HW
HS
HR
ー
T
BK
0402(01005) 0.4×0.2
0603(0201) 0.6×0.3
1005(0402) 1.0×0.5
1608(0603) 1.6×0.8
2125(0805) 2.0×1.25
15
❼Internal code
Standard Products
Multilayer Chip
Bead Inductor
101
102
100
BKH
Refer to impedance
HM curves for material
△
1000
△=Blank Space
differences
LM
LL
TS
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Standard Quantity[pcs]
Paper Tape Embossed Tape
Type
L
W
T
e
+0.04
ー0.03
0.10
BK0402
0.40±0.02
0.20±0.02
0.20±0.02
20000
ー
+0.002
(01005) (0.016±0.001) (0.008±0.001) (0.008±0.001)
(0.004
)
ー0.001
BK0603
(0201) (0.024±0.001) (0.012±0.001) (0.012±0.001) (0.006±0.002)
BK1005 1.00±0.05 0.50±0.05 0.50±0.05 0.25±0.10
(0402) (0.039±0.002) (0.020±0.002) (0.020±0.002) (0.010±0.004)
BKH1005 1.00±0.05 0.50±0.05 0.50±0.05 0.25±0.10
(0402) (0.039±0.002) (0.020±0.002) (0.020±0.002) (0.010±0.004)
BK1608
0.60±0.03
0.30±0.03
0.30±0.03
0.15±0.05
15000
10000
10000
4000
4000
ー
ー
ー
ー
ー
ー
1.6±0.15
0.8±0.15
0.8±0.15
0.3±0.2
(0603) (0.063±0.006) (0.031±0.006) (0.031±0.006) (0.012±0.008)
0.85±0.2
+0.3
2.0
(0.033±0.008)
BK2125
(0805)
ー0.1
1.25±0.2
(0.049±0.008)
0.5±0.3
(0.020±0.012)
+0.012
1.25±0.2
(0.049±0.008)
(0.079
)
ー0.004
2000
Unit:mm(inch)
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci07_e-01
126
■ AVAILABLE MATERIALS
BK0402
BK0603
■
■
HS type
HM type
HS type
HM type
200
800
700
600
500
400
300
200
100
300
250
200
150
100
50
1000
900
800
700
600
500
400
300
200
100
0
180
160
140
120
100
80
1 121
2 700
3 100
1
2
3
4
5
6
HS601
HS241
HS121
HS800
HS330
HS220
1 121
2 750
1
1
2
3
4
5
HM601
HM471
HM241
HM121
HM600
1
2
2
60
3
4
3
4
40
20
5
5
6
0
0
0
1
10
100
1000
10000
1
10
100
1000
10000
Frequency [MHz]
Frequency [MHz]
I max=240~540mA
I max=220~260mA
I max=150~500mA
I max=100~200mA
BK1005
■
HS type
HM type
LL type
HW type
1200
1000
800
1600
1400
1200
1000
800
1000
800
1
2
3
4
5
6
7
8
9
HS102
HS601
HS431
HS241
HS121
HS680
HS800
HS330
HS100
1
HW
HW
1
2
3
4
5
6
7
LL121
LL800
LL560
LL470
LL330
LL220
LL100
700
500
300
HM
HM
HM
HM
HM
1
2
3
HW
HW
HW
2
3
600
400
200
0
6 HM750
600
600
400
4
5
6
7
4
5
400
200
6
200
7
8
9
6
0
1
10
100
1000
10000
Frequency [MHz]
I max=100~200mA
I max=300~500mA
I max=300~1000mA
I max=150~350mA
LL type
LM type
HR type
1
BKH type
2500
2000
1500
1000
500
2500
2000
1500
1000
500
800
3000
2500
2000
1500
1000
500
1
1
1
2
3
4
5
6
7
8
LL241
LL181
LL121
LL680
LL470
LL330
LL220
LL100
1
HR601
1
LM182
1 LM182
600
400
200
0
1
2 LM152
2
2
3
4
5
6
7
8
0
0
0
I max=250~600mA
BK1608
I max=120mA
HS type
I max=300mA
HM type
I max=200mA
LL type
■
/
HW type
2000
1000
1
2
3
4
5
6
7
LL241
LL181
LL121
LL680
LL560
LL470
LL300
HW
HW
HW
HW
HS
HS
HS
HS
HM
1
HM
HM
HM
HM
2
3
4
5
6
7
0
I max=300~600mA
I max=300~1500mA
I max=200~350mA
I max=250~500mA
LM type
LL type
TS type
LM
LM
LM
LM
TS
TS
TS
I max=150~200mA
I max=200~300mA
I max=300~400mA
BK2125
■
HS type
HM type
LL type
LM type
HS
HS
HS
HS
HS
LL
LL
LL
LM
LM
LM
LM
HM
HM
HM
HM
HM
I max=300~1200mA
I max=400~800mA
I max=300~600mA
I max=200~400mA
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci07_e-01
127
■ PART NUMBERS
●BK0402
EHS(Environmental
Measuring
frequency
〔MHz〕
Impedance
〔Ω〕
DC resistance
〔Ω〕(max.)
Rated current
〔mA〕(max.)
Thickness
〔mm〕(inch)
Ordering code
Hazardous
Substances
)
BK 0402 HS 100
BK 0402 HS 700
BK 0402 HS 121
BK 0402 HM750
BK 0402 HM121
RoHS
10±5
0.10
0.37
0.53
0.45
0.60
540
280
240
260
220
RoHS
70±25%
120±25%
75±25%
120±25%
0.20±0.02
(0.008±0.001)
RoHS
100
RoHS
RoHS
●BK0603
EHS(Environmental
Measuring
frequency
〔MHz〕
Impedance
〔Ω〕
DC resistance
〔Ω〕(max.)
Rated current
〔mA〕(max.)
Thickness
〔mm〕(inch)
Ordering code
Hazardous
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
BK 0603 HS 220
BK 0603 HS 330
BK 0603 HS 800
BK 0603 HS 121
BK 0603 HS 241
BK 0603 HS 601
BK 0603 HM600
BK 0603 HM121
BK 0603 HM241
BK 0603 HM471
BK 0603 HM601
BK 0603 LL 100
BK 0603 LL 220
BK 0603 LL 330
BK 0603 LL 470
BK 0603 LL 560
BK 0603 LL 800
BK 0603 LL 121
22±25%
33±25%
80±25%
120±25%
240±25%
600±25%
60±25%
120±25%
240±25%
470±25%
600±25%
10±25%
22±25%
33±25%
47±25%
56±25%
80±25%
120±25%
0.065
0.070
0.40
0.45
0.65
1.20
0.25
0.40
0.80
1.05
1.20
0.25
0.45
0.55
0.70
1.00
1.30
1.50
500
500
200
200
200
150
200
200
200
100
100
200
200
150
150
100
100
100
0.30±0.03
(0.012±0.001)
100
●BK1005
EHS(Environmental
Measuring
frequency
〔MHz〕
Impedance
〔Ω〕
DC resistance
〔Ω〕(max.)
Rated current
〔mA〕(max.)
Thickness
〔mm〕(inch)
Ordering code
Hazardous
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
BK 1005 HW680
BK 1005 HW121
BK 1005 HW241
BK 1005 HW431
BK 1005 HW601
BK 1005 HS 100
BK 1005 HS 330
BK 1005 HS 680
BK 1005 HS 800
BK 1005 HS 121
BK 1005 HS 241
BK 1005 HS 431
BK 1005 HS 601
BK 1005 HS 102
BK 1005 HR 601
BK 1005 HM750
BK 1005 HM121
BK 1005 HM241
BK 1005 HM471
BK 1005 HM601
BK 1005 HM102
BK 1005 LL 100
BK 1005 LL 220
BK 1005 LL 330
BK 1005 LL 470
BK 1005 LL 680
BK 1005 LL 121
BK 1005 LL 181
BK 1005 LL 241
BK 1005 LM 182
BKH 1005 LM 152
BKH 1005 LM 182
68±25%
120±25%
240±25%
430±25%
600±25%
10±5
33±25%
68±25%
80±25%
120±25%
240±25%
430±25%
600±25%
1000±25%
600±25%
75±25%
120±25%
240±25%
470±25%
600±25%
1000±25%
10±25%
22±25%
33±25%
47±25%
0.17
0.24
0.31
0.50
0.60
0.03
0.06
0.10
0.10
0.20
0.30
0.45
0.55
0.58
0.60
0.18
0.18
0.30
0.45
0.50
0.70
0.11
0.18
0.25
0.33
0.31
0.45
0.50
0.70
0.90
1.50
2.00
500
450
400
350
300
1000
700
700
700
500
400
350
300
300
300
350
300
300
250
250
150
500
400
400
350
400
350
300
250
120
200
200
0.50±0.05
(0.020±0.002)
100
68±25%
120±25%
180±25%
240±25%
1800±25%
1500±25%
1800±25%
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci07_e-01
128
■ PART NUMBERS
●BK1608
EHS(Environmental
Measuring
frequency
〔MHz〕
Impedance
〔Ω〕
DC resistance
〔Ω〕(max.)
Rated current
〔mA〕(max.)
Thickness
〔mm〕(inch)
Ordering code
Hazardous
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
BK 1608 HW121
BK 1608 HW241
BK 1608 HW431
BK 1608 HW601
BK 1608 HS 220
BK 1608 HS 330
BK 1608 HS 470
BK 1608 HS 600
BK 1608 HS 800
BK 1608 HS 121
BK 1608 HS 241
BK 1608 HS 601
BK 1608 HS 102
BK 1608 HM121
BK 1608 HM241
BK 1608 HM471
BK 1608 HM601
BK 1608 HM102
BK 1608 LL 300
BK 1608 LL 470
BK 1608 LL 560
BK 1608 LL 680
BK 1608 LL 121
BK 1608 LL 181
BK 1608 LL 241
BK 1608 LL 331
BK 1608 LL 431
BK 1608 LL 511
BK 1608 LL 681
BK 1608 LM 751
BK 1608 LM 152
BK 1608 LM 182
BK 1608 LM 252
BK 1608 TS 431
BK 1608 TS 601
BK 1608 TS 102
120±25%
240±25%
430±25%
600±25%
22±25%
33±25%
47±25%
60±25%
80±25%
120±25%
240±25%
600±25%
1000±25%
120±25%
240±25%
470±25%
600±25%
1000±25%
30±25%
0.15
0.25
600
450
400
300
1500
1200
900
800
600
500
400
350
300
350
300
250
250
200
500
400
400
300
300
250
250
200
200
200
150
300
250
200
200
400
350
300
0.30
0.40
0.05
0.08
0.10
0.10
0.10
0.18
0.25
0.45
0.60
0.20
0.35
0.45
0.60
0.70
0.80±0.15
(0.031±0.006)
100
0.20
47±25%
56±25%
68±25%
0.30
0.30
0.35
120±25%
180±25%
240±25%
330±25%
430±25%
510±25%
680±25%
750±25%
1500±25%
1800±25%
2500±25%
430±25%
600±25%
1000±25%
0.50
0.65
0.80
0.85
0.85
0.90
1.00
0.60
0.75
0.85
1.10
0.21±30%
0.27±30%
0.30±30%
/
●BK2125
EHS(Environmental
Hazardous
Measuring
frequency
〔MHz〕
Impedance
〔Ω〕
DC resistance
〔Ω〕(max.)
Rated current
〔mA〕(max.)
Thickness
〔mm〕(inch)
Ordering code
Substances)
BK 2125 HS 150
BK 2125 HS 220
BK 2125 HS 330
BK 2125 HS 470
BK 2125 HS 750
BK 2125 HS 101
BK 2125 HS 121
BK 2125 HS 241
BK 2125 HS 431
BK 2125 HS 601
BK 2125 HS 102
BK 2125 HM121
BK 2125 HM241
BK 2125 HM471
BK 2125 HM601
BK 2125 HM102
BK 2125 LL 560
BK 2125 LL 121
BK 2125 LL 241
BK 2125 LM 751
BK 2125 LM 152
BK 2125 LM 182
BK 2125 LM 252
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
15±25%
22±25%
33±25%
47±25%
75±25%
0.05
0.05
0.05
0.05
0.10
0.10
0.15
0.20
0.25
0.30
0.40
0.15
0.20
0.25
0.25
0.35
0.20
0.30
0.35
0.30
0.35
0.45
0.75
1200
1200
1200
1000
1000
900
800
600
500
500
300
800
600
500
500
400
600
400
300
400
400
300
200
100±25%
120±25%
240±25%
430±25%
600±25%
1000±25%
120±25%
240±25%
470±25%
600±25%
1000±25%
56±25%
120±25%
240±25%
750±25%
1500±25%
1800±25%
2500±25%
0.85±0.2
(0.033±0.008)
100
1.25±0.2
(0.049±0.008)
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci07_e-01
129
■ ELECTRICAL CHARACTERISTICS
BK0402
■
BK0402 HS100
100
BK0402 HS700
BK0402 HS121
BK0402 HM750
250
200
150
100
50
250
200
150
100
50
300
250
200
150
100
50
80
60
40
Z
R
Z
R
Z
R
Z
20
0
R
X
X
1000
X
1000
X
1000
0
0
0
1
10
100
10000
1
10
100
10000
10000
10000
10000
1
1
1
10
100
10000
10000
10000
1
1
1
10
100
1000
10000
10000
10000
Frequency [MHz]
Frequency [MHz]
Frequency [MHz]
Frequency [MHz]
BK0603
■
BK0603 HS220
BK0402 HM121
BK0603 HS330
100
80
100
80
60
40
20
250
200
150
100
50
300
250
200
150
100
50
60
40
20
0
Z
R
Z
R
R
Z
Z
R
X
X
X
1000
X
0
0
10
100
1000
1
10
100
1
1
1
10
100
1000
1000
1000
10000
10000
10000
10
100
1000
Frequency [MHz]
Frequency[MHz]
Frequency [MHz]
BK0603 HS601
1000
800
600
400
200
250
200
150
100
50
250
200
150
100
50
R
Z
Z
X
X
R
0
10
100
1000
10
100
1
10
100
1000
10
100
1000
Frequency[MHz]
BK0603 HM601
BK0603 HM241
BK0603 HM471
1000
800
600
400
200
0
500
400
1000
800
250
200
150
100
50
Z
Z
300
200
100
0
600
400
200
0
Z
R
R
R
X
X
X
10
100
1
10
100
1000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
BK0603 LL330
BK0603 LL100
BK0603 LL220
BK0603 LL470
500
400
300
200
100
0
500
400
250
200
150
100
50
250
200
150
100
50
300
200
100
0
Z
R
Z
Z
R
R
Z
X
X
X
X
R
0
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
BK1005
■
BK0603 LL560
Z
BK1005 HW680
BK0603 LL800
BK0603 LL121
500
400
250
200
1000
800
1000
800
R
300
200
100
0
150
100
50
600
400
200
0
600
400
200
0
Z
Z
R
R
Z
R
X
X
X
X
1000
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci07_e-01
130
■ ELECTRICAL CHARACTERISTICS
BK1005 HW121
250
BK1005 HW241
BK1005 HW431
BK1005 HW601
500
400
1000
800
1000
800
200
150
300
200
100
0
600
400
200
0
600
400
200
0
Z
Z
100
Z
R
Z
R
R
R
50
X
X
X
X
0
1
10
100
1000
10000
1
1
1
10
100
1000
10000
10000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
BK1005 HS800
BK1005 HS100
BK1005 HS330
BK1005 HS680
250
200
100
80
100
80
250
200
150
100
50
60
40
20
0
60
40
20
0
150
100
50
Z
R
R
Z
R
Z
Z
R
X
X
X
X
0
1
0
10
100
1000
10000
10
100
1000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
BK1005 HS431
250
200
150
100
50
1000
800
600
400
200
0
Z
R
X
100
0
10
1000
Frequency[MHz]
/
BK1005 HR601
BK1005 HM750
BK1005 HS102
BK1005 HM121
1000
200
150
2000
250
200
800
600
400
Z
150
100
50
100
R
1000
Z
50
0
200
0
R
X
X
0
0
1
10
100
1000
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
BK1005 HM102
2000
500
400
300
200
1000
100
0
0
1
10
100
1000
10000
1
10
100
1000
10000
BK1005 LL220
BK1005 LL470
BK1005 LL100
BK1005 LL330
250
250
500
500
400
300
400
300
200
200
150
100
200
150
200
100
50
0
50
0
100
0
100
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci07_e-01
131
■ ELECTRICAL CHARACTERISTICS
BK1005 LL680
500
400
300
200
100
0
1
10
100
1000
10000
BK1608
■
BK1005 LM182
BKH1005 LM152
BKH1005 LM182
2500
2000
3000
2500
2000
1500
1000
500
3000
2500
2000
1500
1000
500
Z
Z
1500
1000
R
Z
R
R
500
0
X
X
X
0
0
1
10
100
1000
10000
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci07_e-01
132
■ ELECTRICAL CHARACTERISTICS
BK1608 LL300
BK1608 LL470
BK1608 LL560
500
500
500
250
250
250
0
0
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
BK1608 LL680
BK1608 LL121
500
1500
250
750
0
0
1
10
100
1000
10000
1
10
100
1000
4000
2000
/
BK2125
■
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci07_e-01
133
■ ELECTRICAL CHARACTERISTICS
1000
Z
500
R
X
0
1
10
100
1000
1000
500
Z
R
X
0
1
10
100
1000
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci07_e-01
134
/
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci07_e-01
135
■ PACKAGING
①Minimum Quantity
②Taping material
◦Tape & Reel Packaging
C K
C K
C K S 2125
1608
2125
Standard Quantity[pcs]
Paper Tape Embossed Tape
Thickness
Type
[mm](inch)
L K
L K
L K
H K
H K
H K
H K
1005
1608
2125
0402
0603
1005
1608
0.8
CK1608(0603)
4000
ー
(0.031)
0.85
4000
ー
ー
2000
ー
(0.033)
1.25
CK2125(0805)
CKS2125(0805)
(0.049)
0.85
H K Q 0603
A Q
B K
B K
B K
B K
B K
B K
B K P 0603
B K P 1005
B K P 1608
B K P 2125
B K H 1005
105
4000
ー
0402
0603
1005
1608
2125
2010
(0.033)
1.25
2000
3000
3000
3000
3000
2000
3000
2000
ー
(0.049)
0.9
CKP2012(0805)
CKP2016(0806)
ー
(0.035)
0.9
ー
(0.035)
0.7
ー
(0.028)
0.9
CKP2520(1008)
ー
C K
2125
(0.035)
1.1
C K S 2125
C K P 2012
C K P 2016
C K P 2520
N M
N M
L K
H K
B K
B K
ー
(0.043)
0.9
NM2012(0805)
NM2520(1008)
LK1005(0402)
LK1608(0603)
ー
2012
2520
2125
2125
2125
3216
(0.035)
1.1
ー
(0.043)
0.5
10000
4000
4000
ー
(0.020)
0.8
ー
(0.031)
0.85
ー
(0.033)
1.25
LK2125(0805)
2000
ー
(0.049)
0.2
③Taping Dimensions
HK0402(01005)
HK0603(0201)
HK1005(0402)
HK1608(0603)
20000
15000
10000
4000
ー
(0.008)
0.3
◦Paper tape (0.315 inches wide)
ー
(0.012)
0.5
ー
(0.020)
0.8
ー
(0.031)
0.85
4000
3000
ー
(0.033)
1.0
HK2125(0805)
ー
(0.039)
0.3
HKQ0603S(0201)
HKQ0603U(0201)
AQ105(0402)
15000
15000
10000
20000
15000
10000
10000
4000
4000
ー
Unit : mm(inch)
(0.012)
0.3
ー
(0.012)
0.5
Insertion
Tape
Thickness
ー
Thickness
Chip cavity
(0.020)
0.2
Pitch
Type
〔mm〕
(inch)
A
B
F
T
BK0402(01005)
BK0603(0201)
BK1005(0402)
BKH1005(0402)
BK1608(0603)
ー
(0.008)
0.3
0.8
1.0±0.2
1.8±0.2
4.0±0.1
1.1max
CK1608(0603)
CK2125(0805)
CKS2125(0805)
LK1005(0402)
LK1608(0603)
LK2125(0805)
HK0402(01005)
HK0603(0201)
HK1005(0402)
HK1608(0603)
HKQ0603S(0201)
HKQ0603U(0201)
AQ105(0402)
(0.031)(0.039±0.008)(0.071±0.008)(0.157±0.004) (0.043max)
ー
(0.012)
0.5
0.85
(0.033)(0.059±0.008)(0.091±0.008)(0.157±0.004) (0.043max)
0.85 1.5±0.2 2.3±0.2 4.0±0.1 1.1max
(0.033)(0.059±0.008)(0.091±0.008)(0.157±0.004) (0.043max)
0.5 0.65±0.1 1.15±0.1 2.0±0.05 0.8max
(0.020)(0.026±0.004)(0.045±0.004)(0.079±0.002) (0.031max)
0.8 1.0±0.2 1.8±0.2 4.0±0.1 1.1max
(0.031)(0.039±0.008)(0.071±0.008)(0.157±0.004) (0.043max)
0.85 1.5±0.2 2.3±0.2 4.0±0.1 1.1max
(0.033)(0.059±0.008)(0.091±0.008)(0.157±0.004) (0.043max)
0.2 0.25±0.04 0.45±0.04 2.0±0.05 0.36max
(0.008)(0.010±0.002)(0.018±0.002)(0.079±0.002) (0.014max)
0.3 0.40±0.06 0.70±0.06 2.0±0.05 0.45max
(0.012)(0.016±0.002)(0.028±0.002)(0.079±0.002) (0.018max)
0.5 0.65±0.1 1.15±0.1 2.0±0.05 0.8max
(0.020)(0.026±0.004)(0.045±0.004)(0.079±0.002) (0.031max)
0.8 1.0±0.2 1.8±0.2 4.0±0.1 1.1max
(0.031)(0.039±0.008)(0.071±0.008)(0.157±0.004) (0.043max)
0.3 0.40±0.06 0.70±0.06 2.0±0.05 0.45max
(0.012)(0.016±0.002)(0.028±0.002)(0.079±0.002) (0.018max)
0.3 0.40±0.06 0.70±0.06 2.0±0.05 0.45max
(0.012)(0.016±0.002)(0.028±0.002)(0.079±0.002) (0.018max)
0.5
1.5±0.2
2.3±0.2
4.0±0.1
1.1max
ー
(0.020)
0.5
ー
(0.020)
0.8
ー
(0.031)
0.85
ー
(0.033)
1.25
BK2125(0805)
2000
ー
(0.049)
0.45
BK2010(0804)
BK3216(1206)
BKP0603(0201)
BKP1005(0402)
BKP1608(0603)
BKP2125(0805)
4000
ー
(0.018)
0.8
4000
ー
(0.031)
0.3
15000
10000
4000
4000
(0.012)
0.5
ー
(0.020)
0.8
ー
0.75±0.1
1.15±0.1
2.0±0.05
0.8max
(0.031)
0.85
(0.020)(0.030±0.004)(0.045±0.004)(0.079±0.002) (0.031max)
ー
(0.033)
To next page
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP1
■ PACKAGING
⑤Reel Size
Insertion
Pitch
Tape
Thickness
Thickness
Chip cavity
Type
〔mm〕
(inch)
A
B
F
T
2.0±0.5
0.2
0.25±0.04
0.45±0.04
2.0±0.05
0.36max
(0.079±0.031)
BK0402(01005)
BK0603(0201)
BK1005(0402)
BK1608(0603)
BK2125(0805)
BK2010(0804)
BKP0603(0201)
BKP1005(0402)
BKP160(8 0603)
BKP2125(0805)
BKH100(5 0805)
(0.008)(0.010±0.002)(0.018±0.002)(0.079±0.002) (0.014max)
φ13.0±0.2
0.3
(0.012)(0.016±0.002)(0.028±0.002)(0.079±0.002) (0.018max)
0.5 0.65±0.1 1.15±0.1 2.0±0.05 0.8max
(0.020)(0.026±0.004)(0.045±0.004)(0.079±0.002) (0.031max)
0.8 1.0±0.2 1.8±0.2 4.0±0.1 1.1max
(0.031)(0.039±0.008)(0.071±0.008)(0.157±0.004) (0.043max)
0.85 1.5±0.2 2.3±0.2 4.0±0.1 1.1max
(0.033)(0.059±0.008)(0.091±0.008)(0.157±0.004) (0.043max)
0.45 1.2±0.1 2.17±0.1 4.0±0.1 0.8max
(0.018)(0.047±0.004)(0.085±0.004)(0.157±0.004) (0.031max)
0.3 0.40±0.06 0.70±0.06 2.0±0.05 0.45max
(0.012)(0.016±0.002)(0.028±0.002)(0.079±0.002) (0.018max)
0.5 0.65±0.1 1.15±0.1 2.0±0.05 0.8max
(0.020)(0.026±0.004)(0.045±0.004)(0.079±0.002) (0.031max)
0.8 1.0±0.2 1.8±0.2 4.0±0.1 1.1max
(0.031)(0.039±0.008)(0.071±0.008)(0.157±0.004) (0.043max)
0.85 1.5±0.2 2.3±0.2 4.0±0.1 1.1max
(0.033)(0.059±0.008)(0.091±0.008)(0.157±0.004) (0.043max)
0.5
0.40±0.06
0.70±0.06
2.0±0.05
0.45max
(φ0.512±0.020)
⑥Top tape strength
The top tape requires a peel-off force of 0.1~0.7N in the direction of the arrow as
0.65±0.1
1.15±0.1
2.0±0.05
0.8max
illustrated below.
(0.020)(0.026±0.004)(0.045±0.004)(0.079±0.002) (0.031max)
Unit : mm(inch)
◦Embossed Tape (0.315 inches wide)
Unit : mm(inch)
Insertion
Pitch
Tape
Thickness
Thickness
〔mm〕
(inch)
Chip cavity
Type
A
B
F
K
T
1.25
1.5±0.2
2.3±0.2
4.0±0.1
2.0
0.3
CK2125(0805)
CKS2125(0805)
CKP2012(0805)
CKP2016(0806)
(0.049) (0.059±0.008) (0.091±0.008) (0.157±0.004) (0.079)(0.012)
1.25
(0.049) (0.059±0.008) (0.091±0.008) (0.157±0.004) (0.079)(0.012)
0.9 1.55±0.2 2.3±0.2 4.0±0.1 1.3 0.3
(0.035) (0.061±0.008) (0.091±0.008) (0.157±0.004) (0.051)(0.012)
0.9 1.8±0.1 2.2±0.1 4.0±0.1 1.3 0.25
(0.035) (0.071±0.004) (0.087±0.004) (0.157±0.004) (0.051) (0.01)
1.5±0.2
2.3±0.2
4.0±0.1
2.0
0.3
0.7
1.4
(0.028)
(0.055)
0.9
2.3±0.1
2.8±0.1
4.0±0.1
1.4
0.3
CKP2520(1008)
(0.035) (0.091±0.004) (0.110±0.004) (0.157±0.004) (0.055)(0.012)
1.1
1.7
(0.043)
(0.067)
0.9
1.55±0.2
2.3±0.2
4.0±0.1
1.3
0.3
NM2012(0805)
NM2520(1008)
LK2125(0805)
(0.035) (0.061±0.008) (0.091±0.008) (0.157±0.004) (0.051)(0.012)
1.1 2.3±0.1 2.8±0.1 4.0±0.1 1.7 0.3
(0.043) (0.091±0.004) (0.110±0.004) (0.157±0.004) (0.067)(0.012)
1.25 1.5±0.2 2.3±0.2 4.0±0.1 2.0 0.3
(0.049) (0.059±0.008) (0.091±0.008) (0.157±0.004) (0.079)(0.012)
0.85
1.5
(0.033)
1.0
(0.059)
2.0
1.5±0.2
2.3±0.2
4.0±0.1
0.3
(0.012)
HK2125(0805)
(0.059±0.008) (0.091±0.008) (0.157±0.004)
(0.039)
(0.079)
1.25
1.5±0.2
2.3±0.2
4.0±0.1
2.0
0.3
BK2125(0805)
BK3216(1206)
(0.049) (0.059±0.008) (0.091±0.008) (0.157±0.004) (0.079)(0.012)
0.8 1.9±0.1 3.5±0.1 4.0±0.1 1.4 0.3
(0.031) (0.075±0.004) (0.138±0.004) (0.157±0.004) (0.055)(0.012)
④LEADER AND BLANK PORTION
160mm or more
100mm or more
(
6.3inches or more
)
(3.94inches or more)
400mm ore more
Direction of tape feed
(15.7inches or more)
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP2
■ RELIABILITY DATA
Multilayer chip inductors and beads
1. Operating Temperature Range
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
-55~+125℃
-55~+85℃
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
-40~+85℃
LK1608
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
-55~+125℃
-40~+85℃
-55~+125℃
2. Storage Temperature Range
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
-55~+125℃
-55~+85℃
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
-40~+85℃
LK1608
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
-55~+125℃
-40~+85℃
-55~+125℃
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP3
■ RELIABILITY DATA
Multilayer chip inductors and beads
3. Rated Current
BK0402
240~540mA DC
100~500mA DC
120~1000mA DC
200mA DC
150~1500mA DC
200~1200mA DC
100mA DC
BK0603
BK1005
BKH1005
BK1608
BK2125
BK2010
ARRAY
BK3216
100~200mA DC
1.0A DC
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
800~2000mA DC
1.0~3.0A DC
1.5~4.0A DC
50~60mA DC
60~500mA DC
110~280mA DC
0.7~1.2A DC
0.9~1.6A DC
1.1~1.8A DC
0.8~1.5A DC
0.9~1.1A DC
20~25mA DC
1~150mA DC
5~300mA DC
160~380mA DC
60~470mA DC
110~300mA DC
150~300mA DC
300mA DC
LK1608
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
130~600mA DC
130~600mA DC
280~710mA DC
Definition of rated current:
・In the CK, CKS and BK Series, the rated current is the value of current at which the temperature of the element is increased within 20℃.
・In the BK Series P type and CK Series P type, NM Series the rated current is the value of current at which the temperature of the element is increased within 40℃.
・In the LK,HK,HKQ,and AQ Series, the rated current is either the DC value at which the internal L value is decreased within 5% with the application of DC bias, or the value of current
at which the temperature of the element is increased within 20℃.
4. Impedance
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
10~120Ω ±25%
10~600Ω ±25%
10~1800Ω ±25%
1500~1800Ω ±25%
22~2500Ω ±25%
15~2500Ω ±25%
5~1000Ω ±25%
68~1000Ω ±25%
22~33Ω ±25%
BK2010
BK3216
ARRAY
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
10~220Ω ±25%
33~470Ω ±25%
33~330Ω ±25%
LK1608
——
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
【Test Methods and Remarks】
BK0402 Series
Measuring frequency:100±1MHz
Measuring equipment:E4991A(or its equivalent)
Measuring jig:16196D(or its equivalent)
BK0603 Series, BKP0603 Series
BK1608・2125 Series, BKP1608・2125 Series
Measuring frequency:100±1MHz
Measuring equipment:4291A(or its equivalent), 4195A(or its equivalent)
Measuring jig:16092A(or its equivalent)or 16192A(or its equivalent)/HW
BK2010・3216 Series
Measuring frequency:100±1MHz
Measuring equipment:4291A(or its equivalent), 4195A(or its equivalent)
Measuring jig:16192A(or its equivalent)
Measuring frequency:100±1MHz
Measuring equipment:4291A(or its equivalent)
Measuring jig:16193A(or its equivalent)
BK1005 Series, BKP1005 Series, BKH1005 Series
Measuring frequency:100±1MHz
Measuring equipment:4291A(or its equivalent)
Measuring jig:16192A(or its equivalent), 16193A(or its equivalent)
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP4
■ RELIABILITY DATA
Multilayer chip inductors and beads
5. Inductance
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
——
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
4.7~10.0μH:±20%
0.1~10.0μH:±20%
1.0~10.0μH:±20%
0.47~4.7μH:±20%
0.47~4.7μH:±20%
0.47~4.7μH:±20%
0.82~1.0μH:±20%
1.0~2.2μH:±20%
0.12~2.2μH:±10%ꢀ Q 0.12~2.2μH:±30%
LK1608
0.047~33.0μH:±20%ꢀ 0.10~12.0μH:±10%ꢀ Q 0.12~2.2μH:±30%
0.047~33.0μH:±20%ꢀ 0.10~12.0μH:±10%ꢀ Q 0.12~2.2μH:±30%
1.0~6.2nH:±0.3nHꢀ 6.8~12nH:±5%
1.0~6.2nH:±0.3nHꢀ 6.8~100nH:±5%
1.0~6.2nH:±0.3nHꢀ 6.8~270nH:±5%
1.0~5.6nH:±0.3nHꢀ 6.8~470nH:±5%
1.5~5.6nH:±0.3nHꢀ 6.8~470nH:±5%
0.6~6.2nH:±0.3nHꢀ 6.8~22nH:±5%
0.6~6.2nH:±0.3nHꢀ 6.8~22nH:±5%
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
1.0~6.2nH:±0.3nHꢀ 6.8~15nH:±5%
【Test Methods and Remarks】
CK Series:
Measuring frequency:2 to 4MHz(CK1608)
Measuring frequency:2 to 25MHz(CK2125)
Measuring frequency:2 to 10MHz(CKS2125)
LK Series:
Measuring frequency:10 to 25MHz(LK1005)
Measuring frequency:1 to 50MHz(LK1608)
Measuring frequency:0.4 to 50MHz(LK2125)
CKP Series, NM Series:
Measuring frequency:1MH(z CKP2012, CKP2016, CKP2520, NM2012・NM2520)
Measuring equipment, jig:・4194A+16085B+16092A(or its equivalent)
・4195A+41951+16092A(or its equivalent)
・4294A+16192A(or its equivalent)
・4291A+16193A(or its equivalent)/LK1005
・4285A+42841A+42842C+42851-61100(CKP2012・CKP2016・CKP2520・NM2012・NM2520)
Measuring current:・1mA rm(s 0.047 to 4.7μH ꢀ ・0.1mA rm(s 5.6 to 33μH)
HK、HKQ、AQ Series:
Measuring frequency:100MH(z HK0402・HK0603・HK1005・AQ105)
Measuring frequency:50/100MH(z HK1608・HK2125)
Measuring frequency:500MH(z HKQ0603S・HKQ0603U)
Measuring equipment, jig:・4291A+16197A(or its equivalent)/HK0603・AQ105
・4291A+16193A(or its equivalent)/HK1005
・E4991A+16197A(or its equivalent)/HKQ0603S・HKQ0603U
・4291A+16092+in-house made jig(or its equivalent)/HK1608・HK2125
・E4991A+16196D(or its equivalent)/HK0402
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP5
■ RELIABILITY DATA
Multilayer chip inductors and beads
6. Q
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
——
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
20 min.
15~20 min.
——
10~20 min.
10~35 min.
15~50 min.
3 min.
LK1608
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
4~5 min.
8 min.
8~12 min.
10~18 min.
10~13 min.
10~13 min.
8 min.
【Test Methods and Remarks】
HK、HKQ、AQ Series:
CK Series:
Measuring frequency:100MH(z HK0603・HK1005・AQ105)
Measuring frequency:50/100MH(z HK1608・HK2125)
Measuring frequency:2 to 4MH(z CK1608)
Measuring frequency:2 to 25MH(z CK2125)
LK Series:
Measuring frequency:10 to 25MH(z LK1005)
Measuring frequency:1 to 50MH(z LK1608)
Measuring frequency:0.4 to 50MH(z LK2125)
Measuring frequency:500MH(z HKQ0603S・HKQ0603U)
Measuring equipment, jig:・4291A+16197A(or its equivalent)/HK0603・AQ105
・4291A+16193A(or its equivalent)/HK1005
・E4991A+16197A(or its equivalent)/HKQ0603S
HKQ0603U
・4291A+16092A+ in-house made jig(or its
equivalent)/HK1608・HK2125
・E4991A+16196D(or its equivalent)HK0402
・
Measuring equipment, jig:・4194A+16085B+16092A(or its equivalent)
・4195A+41951+16092A(or its equivalent)
・4294A+16192A(or its equivalent)
・4291A+16193A(or its equivalent)/LK1005
Measuring current:・1mA rm(s 0.047 to 4.7μH ꢀ ・0.1mA rm(s 5.6 to 33μH)
7. DC Resistance
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
0.10~0.53Ω max.
0.065~1.50Ω max.
0.03~0.80Ω max.
1.50~2.00Ω max.
0.05~1.10Ω max.
0.05~0.75Ω max.
0.10~0.90Ω max.
0.15~0.80Ω max.
0.065~0.070Ω max.
0.030~0.20Ω max.
0.025~0.18Ω max.
0.020~0.075Ω max.
0.45~0.85Ω(±30%)
0.16~0.65Ω max.
0.09~0.40Ω typ.
0.12~0.52Ω max.
0.10~0.28Ω max.
0.08~0.20Ω max.
0.05~0.16Ω max.
0.10~0.19Ω max.
0.13~0.22Ω max.
0.41~1.16Ω max.
0.2~2.2Ω max.
BK2010
BK3216
ARRAY
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
LK1608
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
0.1~1.1Ω max.
0.18~0.99Ω max.
0.11~3.74Ω max.
0.08~4.8Ω max.
0.05~2.6Ω max.
0.10~1.5Ω max.
0.06~1.29Ω max.
0.06~1.29Ω max.
0.07~0.45Ω max.
HKQ0603S
HKQ0603U
AQ105
【Test Methods and Remarks】
Measuring equipment:VOAC-7412(made by Iwasaki Tsushinki ꢀ VOAC-7512(made by Iwasaki Tsushinki)
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP6
■ RELIABILITY DATA
Multilayer chip inductors and beads
8. Self Resonance Frequenc(y SRF)
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
——
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
17~25MHz min.
24~235MHz min.
——
40~180MHz min.
LK1608
9~260MHz min.
LK2125
13~320MHz min.
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
29000~10000MHz min.
900~10000MHz min.
400~10000MHz min.
300~10000MHz min.
200~4000MHz min.
1900~10000MHz min.
1900~10000MHz min.
2300~10000MHz min.
【Test Methods and Remarks】
LK Series:
Measuring equipment:4195A(or its equivalent)
Measuring jig:41951+16092A(or its equivalent)
HK、HKQ、AQ Series:
Measuring equipment:8719C(or its equivalent)・8753D(or its equivalent)/HK2125
9. Temperature Characteristic
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
——
LK1608
LK2125
HK0402
HK0603
HK1005
HK1608
Inductance change:Within ±10%
HK2125
HKQ0603S
HKQ0603U
AQ105
【Test Methods and Remarks】
HK、HKQ、AQ Series:Temperature range:-30 to +85℃
Reference temperature:+20℃
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP7
■ RELIABILITY DATA
Multilayer chip inductors and beads
10. Resistance to Flexure of Substrate
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
No mechanical damage.
NM2520
LK1005
LK1608
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
【Test Methods and Remarks】
Warp:2mm(BK Series without 0402size, BKP, BKH, CK, CKS, CKP, NM, LK, HK, HKQ, AQ Series)
:1mm(BK0402, HK0402 Series)
Testing board:glass epoxy-resin substrate
Thickness:0.8mm
11. Solderability
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
At least 75% of terminal electrode is covered by new solder.
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
LK1608
At least 75% of terminal electrode is covered by new solder.
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
【Test Methods and Remarks】
Solder temperature:230±5℃
Duration:4±1 sec.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP8
■ RELIABILITY DATA
Multilayer chip inductors and beads
12. Resistance to Soldering
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
Appearance:No significant abnormality.
Impedance change:Within ±30%
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
No mechanical damage.
Remaining terminal electrode:70% min.
Inductance change
R10~4R7 :Within ±10%
6R8~100 :Within ±15%
CKS2125 :Within ±20%
CKP2012、CKP2016、CKP2520、NM2012、NM2520:Within ±30%
No mechanical damage.ꢀ Remaining terminal electrode:70% min.ꢀ Inductance change:Within ±15%
LK1608
No mechanical damage.
Remaining terminal electrode:70% min.ꢀ Inductance changeꢀ 47N~4R7:Within ±10%ꢀ 5R6~330:Within ±15%
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
No mechanical damage.
Remaining terminal electrode:70% min.ꢀ Inductance change:Within ±5%
【Test Methods and Remarks】
Solder temperature:260±5℃
Duration:10±0.5 sec.
Preheating temperature:150 to 180℃
Preheating time:3 min.
Flux:Immersion into methanol solution with colophony for 3 to 5 sec.
Recovery:2 to 3 hrs of recovery under the standard condition after the test(. See Note 1)
13. Thermal Shock
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
Appearance:No significant abnormality.
Impedance change:Within ±30%
BK2010
BK3216
ARRAY
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
No mechanical damage.
Inductance change:Within ±20%ꢀ Q change:Within ±30%
Inductance change:Within ±20%(CKS2125)
No mechanical damage.ꢀ Inductance change:Within ±30%
No mechanical damage.
Inductance change:Within ±10%ꢀ Q change:Within ±30%
LK1608
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
No mechanical damage.
Inductance change:Within ±10%ꢀ Q change:Within ±20%
HKQ0603S
HKQ0603U
AQ105
【Test Methods and Remarks】
Conditions for 1 cycle
Step 1:Minimum operating temperature
+0
-3
℃ 30±3 min.
Step 2:Room temperature 2 to 3 min.
+3
-0
Step 3:Maximum operating temperature
Step 4:Room temperature 2 to 3 min.
Number of cycles:5
℃ 30±3 min.
Recovery:2 to 3 hrs of recovery under the standard condition after the test(. See Note 1)
(Note 1) When there are questions concerning mesurement result;measurement shall be made after 48±2 hrs of recovery under the standard condition.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP9
■ RELIABILITY DATA
Multilayer chip inductors and beads
14. Damp Heat(Steady state)
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
Appearance:No significant abnormality.
Impedance change:Within ±30%
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
No mechanical damage.
Inductance change:Within ±20%ꢀ Q change:Within ±30%
Inductance change:Within ±20%
No mechanical damage.ꢀ Inductance change:Within ±30%
No mechanical damage.
Inductance change:Within ±10%ꢀ Q change:Within ±30%
LK1608
LK2125
No mechanical damage.ꢀ Inductance change:Within ±20%ꢀ Q change:Within ±30%
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
No mechanical damage.
Inductance change:Within ±10%ꢀ Q change:Within ±20%
【Test Methods and Remarks】
BK, BKP, BKH Series:
Temperature:40±2℃
Humidity:90 to 95%RH
+24
Duration:500
hrs
-0
Recovery:2 to 3 hrs of recovery under the standard condition after the removal from test chamber(. See Note 1)
LK、CK、CKS、CKP、NM、HK、HKQ、AQ Series:
Temperature:40±2℃(LK、CK、CKS、CKP、NM Series)
:60±2℃(HK、HKQ、AQ Series)
Humidity:90 to 95%RH
Duration:500±12 hrs
Recovery:2 to 3 hrs of recovery under the standard condition after the removal from test chamber(. See Note 1)
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP10
■ RELIABILITY DATA
Multilayer chip inductors and beads
15. Loading under Damp Heat
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
Appearance:No significant abnormality.
Impedance change:Within ±30%
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
No mechanical damage.
Inductance change:Within ±20%ꢀ Q change:Within ±30%
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
No mechanical damage.ꢀ Inductance change:Within ±20%
No mechanical damage.ꢀ Inductance change:Within ±30%
No mechanical damage.ꢀ Inductance change:Within ±10%ꢀ Q change:Within ±30%
No mechanical damage.
LK1608
Inductance change:0.047 to 12.0μH:Within ±10%ꢀ 15.0 to 33.0μH:Within ±15%ꢀ Q change:Within ±30%
LK2125
No mechanical damage.ꢀ Inductance change:Within ±20%ꢀ Q change:Within ±30%
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
No mechanical damage.
Inductance change:Within ±10%ꢀ Q change:Within ±20%
【Test Methods and Remarks】
BK, BKP, BKH Series:
Temperature:40±2℃
Humidity:90 to 95%RH
Applied current:Rated current
+24
Duration:500
hrs
-0
Recovery:2 to 3 hrs of recovery under the standard condition after the removal from test chamber(. See Note 1)
LK、CK、CKS、CKP、NM、HK、HKQ、AQ Series:
Temperature:40±2℃(LK、CK、CKS、CKP、NM Series)
:60±2℃(HK、HKQ、AQ Series)
Humidity:90 to 95%RH
Applied current:Rated current
Duration:500±12 hrs
Recovery:2 to 3 hrs of recovery under the standard condition after the removal from test chamber(. See Note 1)
Note on standard condition: "standard condition" referred to herein is defined as follows:
5 to 35℃ of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity, and 86 to 106kPa of air pressure.
Unless otherwise specified, all the tests are conducted under the "standard condition."
(Note 1) Measurement shall be made after 48±2 hrs of recovery under the standard condition.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP11
■ RELIABILITY DATA
Multilayer chip inductors and beads
16. Loading at High Temperature
BK0402
BK0603
BK1005
BKH1005
BK1608
BK2125
Appearance:No significant abnormality
Impedance change:Within ±30%
BK2010
ARRAY
BK3216
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
No mechanical damage.
Inductance change:Within ±20%ꢀ Q change:Within ±30%
CK2125
CKS2125
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
No mechanical damage.ꢀ Inductance change:Within ±20%
No mechanical damage.ꢀ Inductance change:Within ±30%
No mechanical damage.ꢀ Inductance change:Within ±10%ꢀ Q change:Within ±30%
No mechanical damage.
LK1608
Inductance change:0.047 to 12.0μH:Within ±10%ꢀ 15.0 to 33.0μH:Within ±15%ꢀ Q change:Within ±30%
LK2125
No mechanical damage.ꢀ Inductance change:Within ±20%ꢀ Q change:Within ±30%
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0603S
HKQ0603U
AQ105
No mechanical damage.
Inductance change:Within ±10%ꢀ Q change:Within ±20%
【Test Methods and Remarks】
BK, BKH Series:
Temperature:125±3℃
Applied current:Rated current
+24
Duration:500
hrs
-0
Recovery:2 to 3 hrs of recovery under the standard condition after the removal from test chamber(. See Note 1)
LK、CK、CKS、CKP、NM、HK、HKQ、AQ、BKP Series:
Temperature:85±2℃(LK、CK、CKS、CKP、NM、BKP Series)
:85±2℃(HK1608,2125)
:85±2℃(HK1005, AQ105 operating temperature range -55 to +85℃)
:125±2℃(HK0402, HK0603, HK1005, HKQ0603S, HKQ0603U, AQ105 operating temperature range -55 to +125℃)
Applied current:Rated current
Duration:500±12 hrs
Recovery:2 to 3 hrs of recovery under the standard condition after the test(. See Note 1)
Note on standard condition: "standard condition" referred to herein is defined as follows:
5 to 35℃ of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity, and 86 to 106kPa of air pressure. Unless other-
wise specified, all the tests are conducted under the "standard condition."
(Note 1) Measurement shall be made after 48±2 hrs of recovery under the standard condition.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP12
■ PRECAUTIONS
Precautions on the use of Multilayer chip Inductors, Multilayer chip inductors for high frequency, Multilayer chip bead Inductors
1. Circuit Design
◆Verification of operating environment, electrical rating and performance
1. A malfunction in medical equipment, spacecraft, nuclear reactors, etc. may cause serious harm to human life or have severe social ramifications.
As such, any inductors to be used in such equipment may require higher safety and/or reliability considerations and should be clearly differentiated from
Precautions
components used in general purpose applications.
◆Operating Current(Verification of Rated current)
1. The operating current for inductors must always be lower than their rated values.
2. Do not apply current in excess of the rated value because the inductance may be reduced due to the magnetic saturation effect.
2. PCB Design
◆Pattern configuration(s Design of Land-patterns)
1. When inductors are mounted on a PCB, the size of land patterns and the amount of solder used(size of fillet)can directly affect inductor performance.
Therefore, the following items must be carefully considered in the design of solder land patterns:
(1)The amount of solder applied can affect the ability of chips to withstand mechanical stresses which may lead to breaking or cracking. Therefore, when
designing land-patterns it is necessary to consider the appropriate size and configuration of the solder pads which in turn determines the amount of
solder necessary to form the fillets.
(2)When more than one part is jointly soldered onto the same land or pad, the pad must be designed so that each component's soldering point is separated
Precautions
by solder-resist.
(3)The larger size of land patterns and amount of solder, the smaller Q value after mounting on PCB. It makes higher the Q value to design land patterns
smaller than terminal electrode of chips.
◆Pattern configuration(s Inductor layout on panelized[breakaway]PC boards)
1. After inductors have been mounted on the boards, chips can be subjected to mechanical stresses in subsequent manufacturing processes(PCB cutting,
board inspection, mounting of additional parts, assembly into the chassis, wave soldering the reflow soldered boards etc.)For this reason, planning pattern
configurations and the position of SMD inductors should be carefully performed to minimize stress.
◆Pattern configuration(s Design of Land-patterns)
1. The following diagrams and tables show some examples of recommended patterns to prevent excessive solder amount(s larger fillets which extend above
the component end terminations). Examples of improper pattern designs are also shown.
(1)Recommended land dimensions for a typical chip inductor land patterns for PCBs
Recommended land dimensions for wave-soldering
Recommended land dimensions for reflow-soldering
Type
L
1608
1.6
2125
2.0
3216
3.2
Type
L
0402
0.4
0603
0.6
1005
1.0
105
1.0
0.6
1608
1.6
2012
2.0
2125
2.0
2016
2.0
3216
3.2
2520
2.5
W
A
0.8
1.25
1.6
W
A
0.2
0.3
0.5
0.8
1.25
1.25
1.6
1.6
2.0
0.8~1.0 1.0~1.4 1.8~2.5
0.5~0.8 0.8~1.5 0.8~1.7
0.6~0.8 0.9~1.2 1.2~1.6
(Unit:mm)
0.15~0.25 0.20~0.30 0.45~0.55 0.50~0.55 0.8~1.0 0.8~1.2 0.8~1.2 0.8~1.2 1.8~2.5 1.0~1.4
0.10~0.20 0.20~0.30 0.40~0.50 0.30~0.40 0.6~0.8 0.8~1.2 0.8~1.2 0.8~1.2 0.6~1.5 0.6~1.0
0.15~0.30 0.25~0.40 0.45~0.55 0.60~0.70 0.6~0.8 0.9~1.6 0.9~1.6 1.2~2.0 1.2~2.0 1.8~2.2
(Unit:mm)
B
B
C
C
Excess solder can affect the ability of chips to withstand mechanical stresses. Therefore, please take proper precautions when designing land-patterns.
Recommended land dimension for Reflow-soldering
Type
L
3216
3.2
2010
2.0
W
a
1.6
1.0
0.7~0.9 0.5~0.6
0.8~1.0 0.5~0.6
0.4~0.5 0.2~0.3
Technical
consider-
ations
b
c
d
0.8
0.5
(Unit:mm)
(2)Examples of good and bad solder application
Item
Not recommended
Recommended
Mixed mounting of SMD
and leaded components
Component placement
close to the chassis
Hand-soldering of leaded
components near mounted
components
Horizontal component
placement
To next page
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP13
■ PRECAUTIONS
Precautions on the use of Multilayer chip Inductors, Multilayer chip inductors for high frequency, Multilayer chip bead Inductors
2. PCB Design
◆Pattern configuration(s Inductor layout on panelized[breakaway]PC boards)
1-1. The following are examples of good and bad inductor layout; SMD inductors should be located to minimize any possible mechanical stresses from board
warp or deflection.
Item
Not recommended
Recommended
Deflection of the board
1-2. To layout the inductors for the breakaway PC board, it should be noted that the amount of mechanical stresses given will vary depending on inductor layout.
An example below should be counted for better design.
Technical
consider-
ations
1-3. When breaking PC boards along their perforations, the amount of mechanical stress on the inductors can vary according to the method used. The following
methods are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, any ideal SMD inductor layout must
also consider the PCB splitting procedure.
3. Considerations for automatic placement
◆Adjustment of mounting machine
1. Excessive impact load should not be imposed on the inductors when mounting onto the PC boards.
2. The maintenance and inspection of the mounter should be conducted periodically.
Precautions ◆Selection of Adhesives
1. Mounting inductors with adhesives in preliminary assembly, before the soldering stage, may lead to degraded inductor characteristics unless the following
factors are appropriately checked; the size of land patterns, type of adhesive, amount applied, hardening temperature and hardening period. Therefore, it is
imperative to consult the manufacturer of the adhesives on proper usage and amounts of adhesive to use.
◆Adjustment of mounting machine
1. If the lower limit of the pick-up nozzle is low, too much force may be imposed on the inductors, causing damage. To avoid this, the following points should be
considered before lowering the pick-up nozzle:
(1)The lower limit of the pick-up nozzle should be adjusted to the surface level of the PC board after correcting for deflection of the board.
(2)The pick-up pressure should be adjusted between 1 and 3N static loads.
(3)To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins should be used under the PC
board. The following diagrams show some typical examples of good pick-up nozzle placement:
Item
Improper method
Proper method
Single-sided mounting
Double-sided mounting
2. As the alignment pin wears out, adjustment of the nozzle height can cause chipping or cracking of the inductors because of mechanical impact on the
inductors. To avoid this, the monitoring of the width between the alignment pin in the stopped position, and maintenance, inspection and replacement of the
pin should be conducted periodically.
Technical
consider-
ations
◆Selection of Adhesives
1. Some adhesives may cause reduced insulation resistance. The difference between the shrinkage percentage of the adhesive and that of the inductors may
result in stresses on the inductors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect component
placement, so the following precautions should be noted in the application of adhesives.
(1)Required adhesive characteristics
a. The adhesive should be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive should have sufficient strength at high temperatures.
c. The adhesive should have good coating and thickness consistency.
d. The adhesive should be used during its prescribed shelf life.
e. The adhesive should harden rapidly.
f. The adhesive must not be contaminated.
g. The adhesive should have excellent insulation characteristics.
h. The adhesive should not be toxic and have no emission of toxic gasses.
(2)When using adhesives to mount inductors on a PCB, inappropriate amounts of adhesive on the board may adversely affect component placement. Too
little adhesive may cause the inductors to fall off the board during the solder process. Too much adhesive may cause defective soldering due excessive
flow of adhesive on to the land or solder pad.
[Recommended conditions]
Figure
0805 case sizes as examples
0.3mm min
a
b
c
100~120μm
Area with no adhesive
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP14
■ PRECAUTIONS
Precautions on the use of Multilayer chip Inductors, Multilayer chip inductors for high frequency, Multilayer chip bead Inductors
4. Soldering
◆Selection of Flux
1. Since flux may have a significant effect on the performance of inductors, it is necessary to verify the following conditions prior to use;
(1)Flux used should be with less than or equal to 0.1 wt%(Chlorine conversion method)of halogenated content. Flux having a strong acidity content should
not be applied.
Precautions
(2)When soldering inductors on the board, the amount of flux applied should be controlled at the optimum level.
(3)When using water-soluble flux, special care should be taken to properly clean the boards.
◆Soldering
1. Temperature, time, amount of solder, etc. are specified in accordance with the following recommended conditions, and please contact us about peak tem-
perature when you use lead-free paste.
◆Selection of Flux
1-1. When too much halogenated substance(Chlorine, etc.)content is used to activate the flux, or highly acidic flux is used, an excessive amount of residue
after soldering may lead to corrosion of the terminal electrodes or degradation of insulation resistance on the surface of the Inductor.
1-2. Flux is used to increase solderability in flow soldering, but if too much is applied, a large amount of flux gas may be emitted and may detrimentally affect
solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved by water content in the air, the residue on the surface of Inductor in high humidity conditions may
cause a degradation of insulation resistance and therefore affect the reliability of the components. The cleaning methods and the capability of the machines
used should also be considered carefully when selecting water-soluble flux.
◆Soldering
1-1. Preheating when soldering
Heating: Chip inductor components should be preheated to within 100 to 130℃ of the soldering. Cooling: The temperature difference between the
components and cleaning process should not be greater than 100℃.
Chip inductors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling. Therefore, the soldering process must be
conducted with a great care so as to prevent malfunction of the components due to excessive thermal shock.
Recommended conditions for soldering
[Reflow soldering]
Temperature profile
Temperature(℃)
(Pb free soldering)
300
Peak 260℃ max
10 sec max
200
100
0
Gradually
cooling
Preheating
150℃
60 sec min
Heating above 230℃
40 sec max
※Ceramic chip components should be preheated to
within 100 to 130℃ of the soldering.
※Assured to be reflow soldering for 2 times.
Caution
1. The ideal condition is to have solder mas(s fillet)controlled to 1/2 to 1/3 of the thickness of the inductor, as shown below:
2. Because excessive dwell times can detrimentally affect solderability, soldering duration should be kept as close to recommended times as possible.
Technical
consider-
ations
[Wave soldering]
Temperature profile
Temperature(℃)
(Pb free soldering)
300
Peak 260℃ max
10 sec max
200
100
0
Gradually
cooling
Preheating
150℃
120 sec min
※Ceramic chip components should be preheated to
within 100 to 130℃ of the soldering.
※Assured to be wave soldering for 1 time.
※Except for reflow soldering type.
Caution
1. Make sure the inductors are preheated sufficiently.
2. The temperature difference between the inductor and melted solder should not be greater than 100 to 130℃.
3. Cooling after soldering should be as gradual as possible.
4. Wave soldering must not be applied to the inductors designated as for reflow soldering only.
[Hand soldering]
Temperature profile
Temperature(℃)
(Pb free soldering)
400
350℃ max
3 sec max
300
200
Gradually
cooling
⊿T
100
0
60 sec min
(※⊿TT190℃(3216Type max), ⊿T≦ 130℃(3225
Type ming)
※It is recommended to use 20W soldering iron and
the tip is 1φor less.
※The soldering iron should not directly touch the
components.
※Assured to be soldering iron for 1 time.
Note: The above profiles are the maximum allowable
soldering condition, therefore these profiles are
not always recommended.
Caution
1. Use a 20W soldering iron with a maximum tip diameter of 1.0 mm.
2. The soldering iron should not directly touch the inductor.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP15
■ PRECAUTIONS
Precautions on the use of Multilayer chip Inductors, Multilayer chip inductors for high frequency, Multilayer chip bead Inductors
5. Cleaning
◆Cleaning conditions
1. When cleaning the PC board after the Inductors are all mounted, select the appropriate cleaning solution according to the type of flux used and purpose of
the cleaning(e.g. to remove soldering flux or other materials from the production process.)
2. Cleaning conditions should be determined after verifying, through a test run, that the cleaning process does not affect the inductor's characteristics.
Precautions
◆Cleaning conditions
1. The use of inappropriate solutions can cause foreign substances such as flux residue to adhere to the inductor, resulting in a degradation of the inductor's
electrical propertie(s especially insulation resistance).
2. Inappropriate cleaning condition(s insufficient or excessive cleaning)may detrimentally affect the performance of the inductors.
Technical
consider-
ations
(1)Excessive cleaning
a. In the case of ultrasonic cleaning, too much power output can cause excessive vibration of the PC board which may lead to the cracking of the inductor
or the soldered portion, or decrease the terminal electrodes' strength. Thus the following conditions should be carefully checked;
Ultrasonic output
Ultrasonic frequency
Ultrasonic washing period
Below 20W/ℓ
Below 40kHz
5 min. or less
6. Post cleaning processes
◆Application of resin coatings, moldings, etc. to the PCB and components.
1. With some type of resins a decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while left under normal
storage conditions resulting in the deterioration of the inductor's performance.
2. When a resin's hardening temperature is higher than the inductor's operating temperature, the stresses generated by the excess heat may lead to inductor
damage or destruction.
3. Stress caused by a resin's temperature generated expansion and contraction may damage inductors.
Precautions
7. Handling
The use of such resins, molding materials etc. is not recommended.
◆Breakaway PC board(s splitting along perforations)
1. When splitting the PC board after mounting inductors and other components, care is required so as not to give any stresses of deflection or twisting to the
board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆General handling precautions
1. Always wear static control bands to protect against ESD.
2. Keep the inductors away from all magnets and magnetic objects.
Precautions
3. Use non-magnetic tweezers when handling inductors.
4. Any devices used with the inductors(soldering irons, measuring instruments)should be properly grounded.
5. Keep bare hands and metal product(s i.e., metal desk)away from chip electrodes or conductive areas that lead to chip electrodes.
6. Keep inductors away from items that generate magnetic fields such as speakers or coils.
◆Mechanical considerations
1. Be careful not to subject the inductors to excessive mechanical shocks.
(1)If inductors are dropped on the floor or a hard surface they should not be used.
(2)When handling the mounted boards, be careful that the mounted components do not come in contact with or bump against other boards or components.
8. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control temperature and
humidity in the storage area. Humidity should especially be kept as low as possible.
Recommended conditions
Ambient temperature Below 40℃
Precautions
Humidity
Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions inductor electrode solderability decreases as time passes, so
inductors should be used within 6 months from the time of delivery.
*The packaging material should be kept where no chlorine or sulfur exists in the air.
◆Storage
Technical
consider-
ations
1. If the parts are stocked in a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place. For this reason, components should be used within 6 months from the time of delivery. If
exceeding the above period, please check solderability before using the inductors.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlci0109_reli_e-01
mlci0109_reli-PRP16
BK0603TS102-T 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
BK0603TS121-T | TAIYO YUDEN | Multilayer Chip Bead Inductors (BK series) | 获取价格 | |
BK0603TS121-TV | TAIYO YUDEN | Multilayer Chip Bead Inductors for Automotive (BODY & CHASSIS, INFOTAINMENT) / Industrial Applications (BK series) | 获取价格 | |
BK0603TS121-T_V01 | TAIYO YUDEN | Multilayer Chip Bead Inductors (BK series) | 获取价格 | |
BK0603TS150-T | TAIYO YUDEN | MULTILAYER CHIP BEAD INDUCTORS (BK SERIES) | 获取价格 | |
BK0603TS241-T | TAIYO YUDEN | FERRITE BEAD 240 OHM 0201 1LN | 获取价格 | |
BK0603TS241-TV | TAIYO YUDEN | Multilayer Chip Bead Inductors for Automotive (BODY & CHASSIS, INFOTAINMENT) / Industrial Applications (BK series) | 获取价格 | |
BK0603TS241-T_V01 | TAIYO YUDEN | Multilayer Chip Bead Inductors (BK series) | 获取价格 | |
BK0603TS601-T | TAIYO YUDEN | Ferrite Chip, 0.27A, | 获取价格 | |
BK0603TS601-TV | TAIYO YUDEN | Multilayer Chip Bead Inductors for Automotive (BODY & CHASSIS, INFOTAINMENT) / Industrial Applications (BK series) | 获取价格 | |
BK0603TS601-T_V01 | TAIYO YUDEN | Multilayer Chip Bead Inductors (BK series) | 获取价格 |
BK0603TS102-T 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6