概述
规格参数
数据手册LK21258R2K-T 概述
Multilayer Chip Inductors (LK series) 固定电感器
LK21258R2K-T 规格参数
| 是否无铅： | 不含铅 | 是否Rohs认证： | 符合 |
| 生命周期： | Active | 包装说明： | CHIP, 0805 |
| Reach Compliance Code： | compliant | ECCN代码： | EAR99 |
| HTS代码： | 8504.50.80.00 | Factory Lead Time： | 12 weeks |
| 风险等级： | 1.34 | 大小写代码： | 0805 |
| 构造： | Multilayer Chip | 型芯材料： | FERRITE |
| 直流电阻： | 0.7 Ω | 标称电感 (L)： | 8.2 µH |
| 电感器应用： | RF INDUCTOR | 电感器类型： | GENERAL PURPOSE INDUCTOR |
| 功能数量： | 1 | 端子数量： | 2 |
| 最高工作温度： | 85 °C | 最低工作温度： | -40 °C |
| 封装高度： | 1.25 mm | 封装长度： | 2 mm |
| 封装形式： | SMT | 封装宽度： | 1.25 mm |
| 包装方法： | Tape, Embossed | 最小质量因数（标称电感时）： | 50 |
| 最大额定电流： | 0.015 A | 自谐振频率： | 26 MHz |
| 形状/尺寸说明： | RECTANGULAR PACKAGE | 屏蔽： | NO |
| 特殊特征： | MULTI LAYER | 表面贴装： | YES |
| 端子位置： | DUAL ENDED | 端子形状： | WRAPAROUND |
| 测试频率： | 4 MHz | 容差： | 10% |
LK21258R2K-T 数据手册
通过下载LK21258R2K-T数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Spec Sheet
Multilayer Chip Inductors (LK series)
LK21253R3K-T
Features
Item Summary
3.3uH±10%, 50mA, 0805/2012 (EIA/JIS)
Lifecycle Stage
Mass Production
Standard packaging quantity (minimum)
Taping Embossed 2000pcs
Products characteristics table
Inductance
External Dimensions
Dimension L
Dimension W
Dimension T
Dimension e
2.0 +0.3/-0.1 mm
1.25 ±0.2 mm
1.25 ±0.2 mm
0.5 ±0.3 mm
3.3 uH ± 10 %
0805/2012
50 mA
Case Size (EIA/JIS)
Rated Current (max)
DC Resistance (max)
Q (min)
0.6 Ω
45
LQ Measuring Frequency
Self Resonant Frequency (min)
Operating Temp. Range
RoHS Compliance (10 subst.)
REACH Compliance (191 subst.)
Halogen Free
10 MHz
41 MHz
-40 to +85 ℃
Yes
Yes
Yes
Soldering
Reflow/Wave
2019.03.14
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
http://www.ty-top.com
■Notice for TAIYO YUDEN Products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
!
■
■
Please conduct validation and verification of our products in actual condition of mounting and operating environment before using our
products.
The product listed in this spec sheet is intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric
appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC) and medical
equipment classified as Class I or II by IMDRF. Please be sure to contact TAIYO YUDEN for further information before using the products for any
equipment which may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment, disaster prevention equipment,
medical equipment classified as Class III by IMDRF, highly public information network equipment including, without limitation, telephone
exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment,
aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control equipment, undersea equipment, military
equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g., in-flight
entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN. Please be sure to
contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic equipment, it is strongly
recommended to perform a thorough safety evaluation prior to use of our products and to install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages
incurred by you or third parties arising from use of the product listed in this spec sheet for any equipment requiring inquiry to TAIYO YUDEN or
prohibited for use by TAIYO YUDEN as described above.
■
■
Information contained in this spec sheet is intended to convey examples of typical performances and/or applications of our products and is not
intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third parties
nor grant any license under such rights.
Please note that the scope of warranty for our products is limited to the delivered our products themselves and TAIYO YUDEN shall not be in
any way responsible for any damages resulting from a fault or defect in our products. Notwithstanding the foregoing, if there is a written
agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will
warrant our products in accordance with such agreement.
■
■
The contents of this spec sheet are applicable to our products which are purchased from our sales offices or authorized distributors
(hereinafter “TAIYO YUDEN’s official sales channel”). Please note that the contents of this spec sheet are not applicable to our products
purchased from any seller other than TAIYO YUDEN’s official sales channel.
Caution for Export
The product listed in this spec sheet may require specific procedures for export according to “U.S. Export Administration Regulations”, “Foreign
Exchange and Foreign Trade Control Law” of Japan, and other applicable regulations. Should you have any questions on this matter, please
contact our sales staff.
LK21258R2K-T CAD模型
引脚图
封装焊盘图
LK21258R2K-T 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| LK21258R2K-T_19 | TAIYO YUDEN | Multilayer Chip Inductors (LK series) | 获取价格 |
|
| LK21258R2M-T | TAIYO YUDEN | Multilayer Chip Inductors (LK series) | 获取价格 |
|
| LK21258R2M-T_19 | TAIYO YUDEN | Multilayer Chip Inductors (LK series) | 获取价格 |
|
| LK2125R10-T | TAIYO YUDEN | Notice for TAIYO YUDEN products | 获取价格 |
|
| LK2125R10K-T | TAIYO YUDEN | Multilayer Chip Inductors (LK series) | 获取价格 |
|
| LK2125R10K-T_19 | TAIYO YUDEN | Multilayer Chip Inductors (LK series) | 获取价格 |
|
| LK2125R10M | TAIYO YUDEN | General Purpose Inductor, 0.1uH, 20%, 1 Element, Ferrite-Core, SMD, 0805, CHIP | 获取价格 |
|
| LK2125R10M-T | TAIYO YUDEN | Multilayer Chip Inductors (LK series) | 获取价格 |
|
| LK2125R10M-T_19 | TAIYO YUDEN | Multilayer Chip Inductors (LK series) | 获取价格 |
|
| LK2125R12-T | TAIYO YUDEN | Notice for TAIYO YUDEN products | 获取价格 |
|
LK21258R2K-T 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 5
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 8
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
