FXP07.09.0100A [TAOGLAS]

Flexible PCB Penta Band GSM Antenna;
FXP07.09.0100A
型号: FXP07.09.0100A
厂家: Taoglas    Taoglas
描述:

Flexible PCB Penta Band GSM Antenna

GSM PC
文件: 总11页 (文件大小:979K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SPECIFICATION  
Part No.  
:
FXP07.09.0100A  
Product Name  
: Flexible PCB Penta Band GSM Antenna,  
100mm 1.13cable, right angle MMCX  
connector  
Feature  
: Very low profile penta-band GSM  
Adhesive tape for easy mounting  
RoHS compliant  
SPE-12-8-051/C/ZL  
Page 1 of 11  
1. Introduction  
FXP.07 is a general version of stick-on flexible PCB GSM penta-band antenna. It is  
designed with a cellphone size ground plane so works the best with devices of similar  
size or bigger. This low profile and conformable antenna can be easily fitted into any  
housing for plug-and-play application.  
2. Specification  
Communication  
Penta-band Cellular  
System  
AMPS  
GSM  
DCS  
PCS  
UMTS  
Frequency (MHz)  
Efficiency (ground  
plane)  
824 ~ 896 880~960 1710~1880 1850~1990 1710~2170  
91%  
83%  
14%  
39%  
49%  
21%  
40%  
18%  
29%  
Efficiency (free space) 13%  
VSWR  
1.06~7.3  
50 Ohm  
Impedance  
Radiation Pattern  
Polarization  
Omni-directional  
Linear  
FPCB  
41.0 x 24.0 mm  
MMCX(M)RA  
Ø1.13  
Connector  
Cable  
Cable Length  
Adhesive Tape  
Operation  
100 mm  
3M 467  
-40~ +85℃  
-40~ +85℃  
Temperature  
Storage Temperature  
SPE-12-8-051/C/ZL  
Page 2 of 11  
2.1 Mounting instructions and ground-plane connection  
Peel back 3m paper. On the underside of the antenna is automotive grade 3m adhesive  
(glue) for sticking the FXP.07 directly to plastic (e.g. housing). The antenna can be  
curved around housing but should not be folded sharply  
This is the antenna  
Ground connection - this small  
trace or signal feed  
square pad at the bottom of the  
and should be allowed  
FXP.07 can be seen when paper is  
to be free from the  
removed. This should be connected  
PCB and allowed to  
to extra ground or metal to increase  
exist in free area on  
efficiency (e.g. allow pad to touch  
non metal area  
the side of a PCB like the picture  
(plastic housing)_  
above  
SPE-12-8-051/C/ZL  
Page 3 of 11  
3. Electrical Property  
3.1 Test Setup  
FXP.07 was designed with a cell-phone size ground plane (110 x 45 mm). Tests were  
setup to demonstrate its RF properties with this ground plane, in free space and  
adhered to a plastic box to simulate a typical application device. Satimo SG64  
3D-chamber is used for radiation and efficiency test with 5% tolerance.  
z
y
x
Satimo SG64 3D-chamber and antenna setup reference.  
SPE-12-8-051/C/ZL  
Page 4 of 11  
3.2 Radiation Pattern  
x-y plane  
x-z plane  
x-y plane  
FXP.07 with original ground plane  
x-z plane  
This ground plane is what FXP.07 is  
originally designed for. So the test result  
can be treated as a bench mark for this  
antenna.  
SPE-12-8-051/C/ZL  
Page 5 of 11  
FXP.07 in free space  
x-y plane  
x-z plane  
Miniature antenna needs a ground plane  
for radiation. FXP.07 tested with no  
ground plane present the extreme cases  
of the antenna performance.  
SPE-12-8-051/C/ZL  
Page 6 of 11  
FXP.07 adhere on plastic  
x-y plane  
x-z plane  
Majority of the GSM devices is made with  
plastic housing. This test demonstrate the  
effects of FXP.07 adhere on a piece of  
plastic.  
Compare the result of FXP.07 in free space  
with and without adhering on a piece of  
plastic, the plastic mainly degrade the  
performance of GSM1850MHz band.  
SPE-12-8-051/C/ZL  
Page 7 of 11  
FXP.07 with the ground plane adhere on plastic box  
x-y plane  
x-z plane  
More often, FXP.07 is attached to a piece  
of ground place and packed in a plastic  
box. This test try to simulate a typical  
situation when FXP.07 is attached to a  
piece of PCB, with other piece in a device.  
SPE-12-8-051/C/ZL  
Page 8 of 11  
3.3 Efficiency  
100.00%  
80.00%  
60.00%  
40.00%  
20.00%  
0.00%  
600  
Ground Plane  
Free Space  
1000  
1400  
1800  
2200  
Miniature antennas couple to the ground plane for radiation so the efficiency of the  
antenna without a ground plane is largely degrades in lower frequencies. These tests  
demonstrate the best performance (with the designed ground) and the worst  
performance (with no ground) possible of FXP.07.  
SPE-12-8-051/C/ZL  
Page 9 of 11  
4. Drawing  
SPE-12-8-051/C/ZL  
Page 10 of 11  
5. Packaging  
SPE-12-8-051/C/ZL  
Page 11 of 11  

相关型号:

FXP07.09.0100A_16

Flexible PCB Penta Band GSM Antenna
TAOGLAS

FXP07.B.07.0100A

Embedded 2G/3G Flex Monopole Antenna
TAOGLAS

FXP07.B.07.0100A_16

Embedded 2G/3G Flex Monopole Antenna
TAOGLAS

FXP07070100A

Flexible PCB Penta Band GSM Antenna, 100mm Ø1.13 cable, IPEX connector
TAOGLAS

FXP07090100A

Flexible PCB Penta Band GSM Antenna, 100mm 1.13cable, right angle MMCX connector
TAOGLAS

FXP07B070100A

Embedded 2G/3G Flex Monopole Antenna
TAOGLAS

FXP1000-24

AC-DC Regulated Power Supply Module, 1 Output, 1000W, Hybrid
BEL

FXP1000-48

AC-DC Regulated Power Supply Module, 1 Output, 1000W, Hybrid
BEL

FXP14.07.0100A

FXP14 Hexa Band Cellular Antenna
TAOGLAS

FXP14.07.0100A_14

FXP14 Hexa Band Cellular Antenna
TAOGLAS

FXP14.09.0100A

FXP14 Hexa Band Cellular Antenna
TAOGLAS

FXP14.09.0100A_13

FXP14 Hexa Band Cellular Antenna
TAOGLAS