RECE-20279-001E.01 [TAOGLAS]
IPEX MHF Receptacle Compatible with IPEX MHFII, Hirose U.FL Mating Height: 2.5mm MAX 2,500 pieces per reel;
| 型号： | RECE-20279-001E.01 |
| 厂家： | 
Taoglas |
| 描述： | IPEX MHF Receptacle Compatible with IPEX MHFII, Hirose U.FL Mating Height: 2.5mm MAX 2,500 pieces per reel |
| 文件： | 总7页 (文件大小：280K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SPECIFICATION
Part No.
:
:
RECE.20279.001E.01
Product Name
IPEX MHF Receptacle
Compatible with IPEX MHFII, Hirose U.FL
Mating Height: 2.5mm MAX
2,500 pieces per reel
Photo
:
SPE-16-8-032/A/NW
Page 1 of 7
1. Introduction
The Taoglas RECE.20279.001E.01 is a 3 pad type wire-to-board MHF SMT Receptacle solution
that is ultra small, lightweight and low profile (2.5mm MAX.) with an operational frequency
range of DC to 6 GHz. Taoglas RECE.20279.001E.01 is gold plated to have superior performance
and allow easy mounting of the male RF connector. Packaged on tape and reel, this receptacle
is designed to be placed with automatic “pick and place” equipment.
The RECE.20279.001E.01 acts as a 50 Ohm transmission line to connect the micro-miniature RF
connector to the printed circuit board. It is fully compatible with MHFII and Hirose U.FL
connector.
Applicable Technology
RECE.20279.001E.01 receptacles commonly integrated into GSM module, GPS module,
Wireless LAN modules.
SPE-16-8-032/A/NW
Page 2 of 7
2. Specification
Electrical
Operation Frequency
VSWR
DC to 6 GHz
1.3 Max at DC~3 GHz
1.45 Max at 3~6 GHz
Nominal Impedance
Rated Voltage
50 Ohm
AC 60V
Contact Resistance
Withstand Voltage
Insulation Resistance
Temperature
20m Ohm MAX. (signal) and 20m Ohm MAX. (Ground)
AC 200V/minute
500 M Ohm MIN. /DC 100V
-40 to +90°C
Material
Outer Contact
Centre Contact
Insulator
Copper Alloy (Au plating)
Copper Alloy (Au plating)
LCP UL94V-0
Environmental
-40 to +90°C
Yes
Temperature
RoHs Complaint
Halogen-Free Yes
Yes
Frequency: 10Hz-100Hz
Duration: 15mins
Vibration (Mating
connector)
Peak value of acceleration: 59m/s2 (6G)
Direction, cycle: 3 axis, 5 cycles
Peak Value of acceleration: 735m/s2 (75G)
Duration: 11ms
Shock (Mating connector)
Waveform: Half sinusoidal
Direction: 6 axis
Cycles: 3 cycles for each direction
Temperature: 40+/- 2°C
Humidity
Humidity: 90~95%RH
Duration 96 hours
-40°C for 30mins to 5~35°C for 5 minutes to 90°C for 30mins to
5~35°C for 5 minutes
Thermal Shock
Transition Time: 5 minutes
Cycles: 5
High temperature life
H2S gas
90+/- 2°C for 96 hours
Temperature: 40+/-2°C
Relative Humidity: 80+/-5%RH
SPE-16-8-032/A/NW
Page 3 of 7
Gas H2S 3+/-1ppm
Duration 96 hours
Temperature: 35+/-2°C
Salt Water Density: 5+/-1% (by weight)
Duration: 48 Hours
Salt Water Spray
SPE-16-8-032/A/NW
Page 4 of 7
3. Technical Drawing
SPE-16-8-032/A/NW
Page 5 of 7
4. Footprint
SPE-16-8-032/A/NW
Page 6 of 7
5. Reflow Profile
Recommended soldering temperature profile
SPE-16-8-032/A/NW
Page 7 of 7
相关型号：
©2020 ICPDF网 联系我们和版权申明