B32684A2333000 [TDK]
Metallized Polypropylene Film Capacitors (MFP);型号: | B32684A2333000 |
厂家: | TDK ELECTRONICS |
描述: | Metallized Polypropylene Film Capacitors (MFP) |
文件: | 总32页 (文件大小:606K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Film Capacitors
Metallized Polypropylene Film Capacitors (MFP)
Series/Type:
B32682 ... B32686
Date:
July 2015
© EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Metallized polypropylene film capacitors (MFP)
Very high pulse (wound)
B32682 ... B32686
Typical applications
Smoothing
Dimensional drawing
Snubbering
Electronic ballast
Switch mode power supplies
High-frequency AC loads
High voltages and very high currents
Climatic
Max. operating temperature: 110 °C
Climatic category (IEC 60068-1): 55/100/56
Dimensions in mm
Construction
Dielectric: polypropylene (PP)
Film metallized on one side and
metal foils internally connected in series
Plastic case (UL 94 V-0)
Epoxy resin sealing (UL 94 V-0)
Lead spacing Lead diameter Type
±0.4
15.0
22.5
d1 ±0.05
0.8
B32682
B32683
B32684
B32686
0.8
27.5
37.5
0.8
Features
1.0
Very high pulse strength
Highest possible contact reliability
Self-healing properties
RoHS-compatible
Terminals
Parallel wire leads, lead-free tinned
Special lead lengths available on request
Marking
Manufacturer’s logo, lot number, type number,
rated capacitance (coded),
capacitance tolerance (code letter),
rated DC voltage, date of manufacture (coded)
Delivery mode
Bulk (untaped), Taped (Ammo pack or reels)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 32
B32682 ... B32686
Very high pulse (wound)
Overview of available types
Lead spacing 15.0 mm
22.5 mm
Type
Page
VR (V DC)
CR (nF)
0.47
0.68
1.0
B32682
5
B32683
7
400 630 1000 1250 1600 2000 400 630 1000 1250 1600 2000 2500
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 32
B32682 ... B32686
Very high pulse (wound)
Overview of available types
Lead spacing 27.5 mm
37.5 mm
B32686
10
Type
Page
VR (V DC)
CR (nF)
15
B32684
9
400
630
1000 1250 1600 2000 630
1000 1250 1600 2000
22
33
47
68
100
150
220
330
470
680
1000
1500
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 32
B32682
Very high pulse (wound)
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
f ≤1 kHz
CR
nF
Max. dimensions Ordering code
Straight
Straight
Straight
w × h × l
(composition see terminals, terminals, terminals,
V DC V AC
mm
below)
Ammo
pack
Reel
Untaped
pcs./MOQ pcs./MOQ pcs./MOQ
400 250
15.0 5.0 × 10.5 × 18.0 B32682A4153+*** 4680
22.0 6.0 × 11.0 × 18.0 B32682A4223+*** 3840
33.0 7.0 × 12.5 × 18.0 B32682A4333+*** 3320
47.0 8.5 × 14.5 × 18.0 B32682A4473+*** 2720
4.7 5.0 × 10.5 × 18.0 B32682A6472+*** 4680
6.8 5.0 × 10.5 × 18.0 B32682A6682+*** 4680
10.0 5.0 × 10.5 × 18.0 B32682A6103+*** 4680
15.0 6.0 × 11.0 × 18.0 B32682A6153+*** 3840
22.0 7.0 × 12.5 × 18.0 B32682A6223+*** 3320
33.0 8.5 × 14.5 × 18.0 B32682A6333+*** 2720
47.0 9.0 × 17.5 × 18.0 B32682A6473+*** 2560
3.3 5.0 × 10.5 × 18.0 B32682A0332+*** 4680
4.7 5.0 × 10.5 × 18.0 B32682A0472+*** 4680
6.8 6.0 × 12.0 × 18.0 B32682A0682+*** 3840
10.0 7.0 × 12.5 × 18.0 B32682A0103+*** 3320
15.0 8.5 × 14.5 × 18.0 B32682A0153+*** 2720
2.2 5.0 × 10.5 × 18.0 B32682A7222+*** 4680
3.3 5.0 × 10.5 × 18.0 B32682A7332+*** 4680
4.7 6.0 × 12.0 × 18.0 B32682A7472+*** 3840
6.8 7.0 × 12.5 × 18.0 B32682A7682+*** 3320
10.0 8.5 × 14.5 × 18.0 B32682A7103+*** 2720
5200
4400
3600
2800
5200
5200
5200
4400
3600
2800
2800
5200
5200
4400
3600
2800
5200
5200
4400
3600
2800
4000
4000
4000
2000
4000
4000
4000
4000
4000
2000
2000
4000
4000
4000
4000
2000
4000
4000
4000
4000
2000
630 300
1000 400
1250 450
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitances values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = ±20%
K = ±10%
J = ±5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, untaped (lead length
6 - 1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 32
B32682
Very high pulse (wound)
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
f ≤1 kHz
CR
nF
Max. dimensions Ordering code
Straight
Straight
Straight
w × h × l
(composition see terminals, terminals, terminals,
V DC V AC
mm
below)
Ammo
pack
Reel
Untaped
pcs./MOQ pcs./MOQ pcs./MOQ
1600 500
1.5 5.0 × 10.5 × 18.0 B32682A1152+*** 4680
2.2 6.0 × 11.0 × 18.0 B32682A1222+*** 3840
3.3 7.0 × 12.5 × 18.0 B32682A1332+*** 3320
4.7 8.5 × 14.5 × 18.0 B32682A1472+*** 2720
6.8 9.0 × 17.5 × 18.0 B32682A1682+*** 2560
0.47 5.0 × 10.5 × 18.0 B32682A2471M*** 4680
0.68 5.0 × 10.5 × 18.0 B32682A2681M*** 4680
1.0 5.0 × 10.5 × 18.0 B32682A2102+*** 4680
1.5 6.0 × 12.0 × 18.0 B32682A2152+*** 3840
2.2 7.0 × 12.5 × 18.0 B32682A2222+*** 3320
3.3 8.5 × 14.5 × 18.0 B32682A2332+*** 2720
5200
4400
3600
2800
2800
5200
5200
5200
4400
3600
2800
4000
4000
4000
2000
2000
4000
4000
4000
4000
4000
2000
2000 550
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitances values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = ±20%
K = ±10%
J = ±5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, untaped (lead length
6 - 1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 32
B32683
Very high pulse (wound)
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VRMS
f ≤1 kHz
CR
nF
Max. dimensions Ordering code
Straight
Straight
Straight
w × h × l
(composition see terminals, terminals, terminals,
V DC V AC
mm
below)
Ammo
pack
Reel
Untaped
pcs./MOQ pcs./MOQ pcs./MOQ
400 250
33.0 6.0 × 15.0 × 26.5 B32683A4333+*** 2720
47.0 6.0 × 15.0 × 26.5 B32683A4473+*** 2720
68.0 7.0 × 16.0 × 26.5 B32683A4683+*** 2320
100.0 8.5 × 16.5 × 26.5 B32683A4104+*** 1920
150.0 10.5 × 18.5 × 26.5 B32683A4154+*** 1560
33.0 6.0 × 15.0 × 26.5 B32683A6333+*** 2720
47.0 7.0 × 16.0 × 26.5 B32683A6473+*** 2320
68.0 8.5 × 16.5 × 26.5 B32683A6683+*** 1920
100.0 10.5 × 18.5 × 26.5 B32683A6104+*** 1560
2800
2800
2400
2000
1600
2800
2400
2000
1600
ꢀ
2880
2880
2520
2040
2160
2880
2520
2040
2160
1800
2880
2880
2520
2040
2160
1800
2880
2520
2040
2160
2880
2520
2040
2160
630 300
150.0 12.0 × 22.0 × 26.5 B32683A6154+***
ꢀ
1000 400
10.0 6.0 × 15.0 × 26.5 B32683A0103+*** 2720
15.0 6.0 × 15.0 × 26.5 B32683A0153+*** 2720
22.0 7.0 × 16.0 × 26.5 B32683A0223+*** 2320
33.0 8.5 × 16.5 × 26.5 B32683A0333+*** 1920
47.0 10.5 × 18.5 × 26.5 B32683A0473+*** 1560
2800
2800
2400
2000
1600
ꢀ
68.0 12.0 × 22.0 × 26.5 B32683A0683+***
ꢀ
1250 450
1600 500
10.0 6.0 × 15.0 × 26.5 B32683A7103+*** 2720
15.0 7.0 × 16.0 × 26.5 B32683A7153+*** 2320
22.0 8.5 × 16.5 × 26.5 B32683A7223+*** 1920
33.0 10.5 × 18.5 × 26.5 B32683A7333+*** 1560
6.8 6.0 × 15.0 × 26.5 B32683A1682+*** 2720
10.0 7.0 × 16.0 × 26.5 B32683A1103+*** 2320
15.0 8.5 × 16.5 × 26.5 B32683A1153+*** 1920
22.0 10.5 × 18.5 × 26.5 B32683A1223+*** 1560
2800
2400
2000
1600
2800
2400
2000
1600
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitances values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = ±20%
K = ±10%
J = ±5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, untaped (lead length
6 - 1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 32
B32683
Very high pulse (wound)
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VRMS
f ≤1 kHz
CR
nF
Max. dimensions Ordering code
Straight
Straight
Straight
w × h × l
(composition see terminals, terminals, terminals,
V DC V AC
mm
below)
Ammo
pack
Reel
Untaped
pcs./MOQ pcs./MOQ pcs./MOQ
2000 550
3.3 6.0 × 15.0 × 26.5 B32683A2332+*** 2720
4.7 6.0 × 15.0 × 26.5 B32683A2472+*** 2720
6.8 7.0 × 16.0 × 26.5 B32683A2682+*** 2320
10.0 8.5 × 16.5 × 26.5 B32683A2103+*** 1920
15.0 10.5 × 18.5 × 26.5 B32683A2153+*** 1560
1.5 6.0 × 15.0 × 26.5 B32683A3152+*** 2720
2.2 7.0 × 16.0 × 26.5 B32683A3222+*** 2320
3.3 8.5 × 16.5 × 26.5 B32683A3332+*** 1920
4.7 10.5 × 18.5 × 26.5 B32683A3472+*** 1560
2800
2800
2400
2000
1600
2800
2400
2000
1600
ꢀ
2880
2880
2520
2040
2160
2880
2520
2040
2160
1800
2500 750
6.8 12.0 × 22.0 × 26.5 B32683A3682+***
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitances values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = ±20%
K = ±10%
J = ±5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, untaped (lead length
6 - 1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 32
B32684
Very high pulse (wound)
Ordering codes and packing units (lead spacing 27.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
mm
Ordering code
(composition see
below)
Straight terminals,
Untaped
pcs./MOQ
V DC V AC
400 250
nF
150.0
220.0
330.0
470.0
680.0
100.0
150.0
220.0
330.0
470.0
47.0
11.0 × 19.0 × 31.5
11.0 × 21.0 × 31.5
13.5 × 23.0 × 31.5
18.0 × 27.5 × 31.5
19.0 × 30.0 × 31.5
11.0 × 19.0 × 31.5
11.0 × 21.0 × 31.5
13.5 × 23.0 × 31.5
15.0 × 24.5 × 31.5
19.0 × 30.0 × 31.5
11.0 × 19.0 × 31.5
11.0 × 21.0 × 31.5
13.5 × 23.0 × 31.5
18.0 × 27.5 × 31.5
21.0 × 31.0 × 31.5
11.0 × 19.0 × 31.5
11.0 × 21.0 × 31.5
13.5 × 23.0 × 31.5
15.0 × 24.5 × 31.5
19.0 × 30.0 × 31.5
11.0 × 19.0 × 31.5
11.0 × 21.0 × 31.5
13.5 × 23.0 × 31.5
15.0 × 24.5 × 31.5
19.0 × 30.0 × 31.5
11.0 × 19.0 × 31.5
11.0 × 21.0 × 31.5
13.5 × 23.0 × 31.5
18.0 × 27.5 × 31.5
19.0 × 30.0 × 31.5
B32684A4154+000
B32684A4224+000
B32684A4334+000
B32684A4474+000
B32684A4684+000
B32684A6104+000
B32684A6154+000
B32684A6224+000
B32684A6334+000
B32684A6474+000
B32684A0473+000
B32684A0683+000
B32684A0104+000
B32684A0154+000
B32684A0224+000
B32684A7333+000
B32684A7473+000
B32684A7683+000
B32684A7104+000
B32684A7154+000
B32684A1223+000
B32684A1333+000
B32684A1473+000
B32684A1683+000
B32684A1104+000
B32684A2153+000
B32684A2223+000
B32684A2333+000
B32684A2473+000
B32684A2683+000
1280
1280
1040
800
720
630 300
1000 400
1250 450
1600 500
2000 550
1280
1280
1040
960
720
1280
1280
1040
800
68.0
100.0
150.0
220.0
33.0
47.0
68.0
100.0
150.0
22.0
33.0
47.0
68.0
100.0
15.0
22.0
33.0
784
1280
1280
1040
960
720
1280
1280
1040
960
720
1280
1280
1040
800
47.0
68.0
720
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitances values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 32
B32686
Very high pulse (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
mm
Ordering code
(composition see
below)
Straight terminals,
Untaped
pcs./MOQ
V DC V AC
630 300
nF
680.0
18.0 × 32.5 × 42.0
20.0 × 39.5 × 42.0
28.0 × 42.5 × 42.0
12.0 × 22.0 × 42.0
12.0 × 22.0 × 42.0
14.0 × 25.0 × 42.0
16.0 × 28.5 × 42.0
20.0 × 39.5 × 42.0
28.0 × 37.0 × 42.0
12.0 × 22.0 × 42.0
14.0 × 25.0 × 42.0
16.0 × 28.5 × 42.0
18.0 × 32.5 × 42.0
20.0 × 39.5 × 42.0
12.0 × 22.0 × 42.0
14.0 × 25.0 × 42.0
18.0 × 32.5 × 42.0
20.0 × 39.5 × 42.0
28.0 × 37.0 × 42.0
12.0 × 22.0 × 42.0
12.0 × 22.0 × 42.0
14.0 × 25.0 × 42.0
16.0 × 28.5 × 42.0
18.0 × 32.5 × 42.0
B32686A6684+000
B32686A6105+000
B32686A6155+000
B32686A0683+000
B32686A0104+000
B32686A0154+000
B32686A0224+000
B32686A0334+000
B32686A0474+000
B32686A7683+000
B32686A7104+000
B32686A7154+000
B32686A7224+000
B32686A7334+000
B32686A1473+000
B32686A1683+000
B32686A1104+000
B32686A1154+000
B32686A1224+000
B32686A2223+000
B32686A2333+000
B32686A2473+000
B32686A2683+000
B32686A2104+000
192
128
216
288
288
224
192
128
128
288
224
192
192
128
288
224
192
192
216
288
288
224
192
192
1000.0
1500.0
68.0
100.0
150.0
220.0
330.0
470.0
68.0
100.0
150.0
220.0
330.0
47.0
1000 400
1250 450
1600 500
2000 550
68.0
100.0
150.0
220.0
22.0
33.0
47.0
68.0
100.0
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitances values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 32
B32682 ... B32686
Very high pulse (wound)
Technical data
Operating temperature range Max. operating temperature Top,max
Upper category temperature Tmax
+110 °C
+100 °C
ꢀ55 °C
+85 °C
+75 °C
Lower category temperature Tmin
Rated DC temperature TRDC
Rated AC temperature TRAC
The rated voltage is decreased with 1.25%/°C between rated
temperature and +100 °C
Voltage Derating
Dissipation factor tan δ
at
CR ≤ 0.1 µF 0.1 µF < CR ≤ 1 µF
CR > 1 µF
at 20 °C (upper limit values)
1 kHz
10 kHz
100 kHz
0.0004
0.0004
0.001
0.0004
0.0006
ꢀ
0.0004
ꢀ
ꢀ
Insulation resistance Rins
CR ≤ 0.33 µF
CR > 0.33 µF
or time constant t = CR × Rins
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
100 GΩ
30000 s
DC test voltage
2.0 ꢁ VR, 2 s
TA (°C)
Category voltage VC
VDC continuous operation
DC voltage derating
VC = VR
AC voltage derating
TA ≤ 85
85<TA≤100 VC = VR ꢁ (165ꢀTA)/80
VAC continuous operation
TA ≤ 85
VC = VRMS
at f ≤ 1 kHz
75<TA≤100
VC,RMS = VRMSꢁ(155ꢀTA)/80
Damp heat test
Limit values after damp
heat test
56 days/40 °C/93% relative humidity
Capacitance change ꢂ∆C/Cꢂ
Dissipation factor change ∆ tan δ
Insulation resistance Rins
≤ 2%
≤ 1.0 ꢁ 10-3 (at 10 kHz)
≥ 50% of minimum
as delivered values
Reliability:
Endurance test AC
Endurance test DC
1.25 ꢁ VC / 85 °C / 1000 h
1.25 ꢁ VC / 85 °C / 100 °C / 1000 h
Failure rate λ
1 fit (≤ 2 ꢁ 10-3 at 0.5 ꢁ VR, 40 °C
200 000 h at 1.0 ꢁ VR, 85 °C
Service life tSL
Failure criteria:
Total failure
Short circuit or open circuit
Capacitance change ꢂ∆C/Cꢂ
Dissipation factor tan δ
Failure due to variation
of parameters
> 10%
> 4 ꢁ upper limit value
Insulation resistance Rins
or time constant t = CR ꢁ Rins
< 1500 MΩ (CR ≤ 0.33 µF
< 500 s (CR > 0.33 µF)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 32
B32682 ... B32686
Very high pulse (wound)
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/µs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt values
Lead spacing
VR
15 mm
22.5 mm
27.5 mm
37.5 mm
VRMS
V AC
250
300
400
450
500
550
750
V DC
400
dV/dt in V/µs
7 000
5 000
7 000
4 000
5 000
9 000
9 000
11 000
11 000
ꢀ
ꢀ
3 000
5 000
6 000
9 000
9 000
ꢀ
630
12 000
15 000
27 000
27 000
39 000
ꢀ
1000
1250
1600
2000
2500
11 000
11 000
17 000
21 000
21 000
k0 values
Lead spacing
VR
15 mm
22.5 mm
27.5 mm
37.5 mm
VRMS
V AC
250
300
400
450
500
550
750
V DC
400
k0 in V2/µs
5 600 000
4 000 000
8 820 000
3 200 000
6 300 000
18 000 000
22 500 000
35 200 000
44 000 000
ꢀ
ꢀ
630
15 120 000
30 000 000
67 500 000
86 400 000
156 000 000
ꢀ
3 780 000
10 000 000
15 000 000
28 800 000
36 000 000
ꢀ
1000
1250
1600
2000
2500
22 000 000
27 500 000
54 400 000
84 000 000
105 000 000
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 32
B32682 ... B32686
Very high pulse (wound)
Impedance Z versus frequency f
(typical values)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 32
B32682
Very high pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤ 90 °C)
For TA > 90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
400 V DC/250 V AC
630 V DC/300 V AC
1000 V DC/400 V AC
1250 V DC/450 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 32
B32682
Very high pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
1600 V DC/500 V AC
2000 V DC/550 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 32
B32683
Very high pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤ 90 °C)
For TA > 90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
400 V DC/250 V AC
630 V DC/300 V AC
1000 V DC/400 V AC
1250 V DC/450 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 32
B32683
Very high pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
1600 V DC/500 V AC
2000 V DC/550 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 32
B32684
Very high pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤ 90 °C)
For TA > 90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
400 V DC/250 V AC
630 V DC/300 V AC
1000 V DC/400 V AC
1250 V DC/450 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 32
B32684
Very high pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
1600 V DC/500 V AC
2000 V DC/550 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 32
B32686
Very high pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤ 90 °C)
For TA > 90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
630 V DC/300 V AC
1000 V DC/400 V AC
1250 V DC/450 V AC
1600 V DC/500 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 32
B32686
Very high pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
2000 V DC/550 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 32
B32682 ... B32686
Very high pulse (wound)
Mounting guidelines
1
Soldering
Solderability of leads
1.1
The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far
higher than the upper category temperature of the capacitors, the terminal wires should be cut off
from the capacitor before the ageing procedure to prevent the solderability being impaired by the
products of any capacitor decomposition that might occur.
Solder bath temperature
Soldering time
235 ±5 °C
2.0 ±0.5 s
Immersion depth
Evaluation criteria:
Visual inspection
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Wetting of wire surface by new solder ≥90%, free-flowing solder
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.
Conditions:
Series
Solder bath temperature Soldering time
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C
coated
10 ±1 s
uncoated (lead spacing > 10 mm)
MFP
MKP (lead spacing > 7.5 mm)
MKT boxed (case 2.5 × 6.5 × 7.2 mm)
5 ±1 s
(lead spacing ≤ 7.5 mm)
uncoated (lead spacing ≤ 10 mm)
insulated (B32559)
MKP
MKT
< 4 s
recommended soldering
profile for MKT uncoated
(lead spacing ≤ 10 mm) and
insulated (B32559)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 32
B32682 ... B32686
Very high pulse (wound)
Immersion depth
Shield
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor
body and liquid solder
Evaluation criteria:
Visual inspection
No visible damage
2% for MKT/MKP/MFP
5% for EMI suppression capacitors
As specified in sectional specification
∆C/C0
tan δ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 32
B32682 ... B32686
Very high pulse (wound)
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature Tmax. Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommendations
As a reference, the recommended wave soldering profile for our film capacitors is as follows:
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 32
B32682 ... B32686
Very high pulse (wound)
Body remperature should follow the description below:
MKP capacitor
During pre-heating: Tp ≤ 110 °C
During soldering: Ts ≤ 120 °C, ts ≤ 45 s
MKT capacitor
During pre-heating: Tp ≤ 125 °C
During soldering: Ts ≤ 160 °C, ts ≤ 45 s
When SMD components are used together with leaded ones, the film capacitors should not pass
into the SMD adhesive curing oven. The leaded components should be assembled after the SMD
curing step.
Leaded film capacitors are not suitable for reflow soldering.
For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 °C in the preheater phase
rapid cooling after soldering
Please refer to EPCOS Film Capacitor Data Book in case more details are needed.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 25 of 32
B32682 ... B32686
Very high pulse (wound)
Cautions and warnings
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
The table below summarizes the safety instructions that must always be observed. A detailed de-
scription can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Safety information
Reference chapter
"General technical
information"
Storage conditions Make sure that capacitors are stored within the
4.5
specified range of time, temperature and humidity "Storage conditions"
conditions.
Flammability
Avoid external energy, such as fire or electricity
(passive flammability), avoid overload of the
capacitors (active flammability) and consider the
flammability of materials.
5.3
"Flammability"
Resistance to
vibration
Do not exceed the tested ability to withstand
vibration. The capacitors are tested to
IEC 60068-2-6.
5.2
"Resistance to vibration"
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Please read Cautions and warnings and
Important notes at the end of this document.
Page 26 of 32
B32682 ... B32686
Very high pulse (wound)
Topic
Safety information
Reference chapter
"Mounting guidelines"
Soldering
Cleaning
Do not exceed the specified time or temperature 1 "Soldering"
limits during soldering.
Use only suitable solvents for cleaning capacitors. 2 "Cleaning"
Embedding of
capacitors in
When embedding finished circuit assemblies in
plastic resins, chemical and thermal influences
3 "Embedding of
capacitors in finished
assemblies"
finished assemblies must be taken into account.
Caution: Consult us first, if you also wish to
embed other uncoated component types!
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the or-
dering codes are due to different processes employed and do not affect the specifications
of the respective products. Detailed information can be found on the Internet under
www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 32
B32682 ... B32686
Very high pulse (wound)
Symbols and terms
Symbol
α
English
German
Heat transfer coefficient
Wärmeübergangszahl
αC
Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität
A
Capacitor surface area
Kondensatoroberfläche
Feuchtekoeffizient der Kapazität
Kapazität
βC
Humidity coefficient of capacitance
Capacitance
C
CR
Rated capacitance
Nennkapazität
∆C
∆C/C
Absolute capacitance change
Relative capacitance change (relative
deviation of actual value)
Absolute Kapazitätsänderung
Relative Kapazitätsänderung (relative
Abweichung vom Ist-Wert)
∆C/CR
Capacitance tolerance (relative deviation Kapazitätstoleranz (relative Abweichung
from rated capacitance)
Time differential
vom Nennwert)
dt
Differentielle Zeit
∆t
Time interval
Zeitintervall
∆T
Absolute temperature change
(self-heating)
Absolute Temperaturänderung
(Selbsterwärmung)
∆tan δ
∆V
Absolute change of dissipation factor
Absolute voltage change
Absolute Änderung des Verlustfaktors
Absolute Spannungsänderung
dV/dt
Time differential of voltage function (rate Differentielle Spannungsänderung
of voltage rise)
(Spannungsflankensteilheit)
Spannungsänderung pro Zeitintervall
Aktivierungsenergie zur Diffusion
Eigeninduktivität
∆V/∆t
E
Voltage change per time interval
Activation energy for diffusion
Self-inductance
ESL
ESR
f
Equivalent series resistance
Frequency
Ersatz-Serienwiderstand
Frequenz
f1
Frequency limit for reducing permissible Grenzfrequenz für thermisch bedingte
AC voltage due to thermal limits
Reduzierung der zulässigen
Wechselspannung
f2
Frequency limit for reducing permissible Grenzfrequenz für strombedingte
AC voltage due to current limit
Reduzierung der zulässigen
Wechselspannung
fr
Resonant frequency
Resonanzfrequenz
FD
Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur
Diffusion
FT
i
Derating factor
Deratingfaktor
Current (peak)
Stromspitze
IC
Category current (max. continuous
current)
Kategoriestrom (max. Dauerstrom)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 32
B32682 ... B32686
Very high pulse (wound)
Symbol
IRMS
English
German
(Sinusoidal) alternating current,
root-mean-square value
Capacitance drift
(Sinusförmiger) Wechselstrom
iz
Inkonstanz der Kapazität
Impulskennwert
k0
LS
λ
Pulse characteristic
Series inductance
Serieninduktivität
Failure rate
Ausfallrate
λ0
Constant failure rate during useful
service life
Konstante Ausfallrate in der
Nutzungsphase
λtest
Pdiss
Pgen
Q
Failure rate, determined by tests
Dissipated power
Experimentell ermittelte Ausfallrate
Abgegebene Verlustleistung
Erzeugte Verlustleistung
Wärmeenergie
Generated power
Heat energy
ρ
Density of water vapor in air
Universal molar constant for gases
Ohmic resistance of discharge circuit
Dichte von Wasserdampf in Luft
Allg. Molarkonstante für Gas
Ohmscher Widerstand des
Entladekreises
R
R
Ri
Internal resistance
Insulation resistance
Parallel resistance
Series resistance
severity (humidity test)
Time
Innenwiderstand
Rins
RP
RS
S
Isolationswiderstand
Parallelwiderstand
Serienwiderstand
Schärfegrad (Feuchtetest)
Zeit
t
T
Temperature
Temperatur
τ
Time constant
Zeitkonstante
tan δ
tan δD
Dissipation factor
Dielectric component of dissipation
factor
Verlustfaktor
Dielektrischer Anteil des Verlustfaktors
tan δP
tan δS
TA
Parallel component of dissipation factor Parallelanteil des Verlfustfaktors
Series component of dissipation factor Serienanteil des Verlustfaktors
Temperature of the air surrounding the Temperatur der Luft, die das Bauteil
component
umgibt
Tmax
Tmin
tOL
Upper category temperature
Lower category temperature
Obere Kategorietemperatur
Untere Kategorietemperatur
Operating life at operating temperature Betriebszeit bei Betriebstemperatur und
and voltage
-spannung
Top
TR
Operating temperature
Rated temperature
Reference temperature
Reference service life
Beriebstemperatur
Nenntemperatur
Referenztemperatur
Referenz-Lebensdauer
Tref
tSL
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 32
B32682 ... B32686
Very high pulse (wound)
Symbol
VAC
English
German
AC voltage
Wechselspannung
VC
Category voltage
Category AC voltage
Kategoriespannung
(Sinusförmige)
VC,RMS
Kategorie-Wechselspannung
Teilentlade-Einsatzspannung
Ladespannung
VCD
Vch
VDC
VFB
Vi
Corona-discharge onset voltage
Charging voltage
DC voltage
Gleichspannung
Fly-back capacitor voltage
Input voltage
Spannung (Flyback)
Eingangsspannung
Ausgangssspannung
Betriebsspannung
Vo
Output voltage
Vop
Vp
Operating voltage
Peak pulse voltage
Peak-to-peak voltage Impedance
Rated voltage
Impuls-Spitzenspannung
Spannungshub
Vpp
VR
Nennspannung
Amplitude of rated AC voltage
Amplitude der Nenn-Wechselspannung
R
VRMS
(Sinusoidal) alternating voltage,
root-mean-square value
S-correction voltage
(Sinusförmige) Wechselspannung
VSC
Vsn
Spannung bei Anwendung "S-correction"
Spannung bei Anwendung
"Beschaltung"
Snubber capacitor voltage
Z
Impedance
Scheinwiderstand
Lead spacing
Rastermaß
Please read Cautions and warnings and
Important notes at the end of this document.
Page 30 of 32
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
Page 31 of 32
Important notes
7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue,
MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D,
SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and
in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
Page 32 of 32
相关型号:
B32684A2333J000
Film Capacitor, Polypropylene, 2000V, 5% +Tol, 5% -Tol, 0.033uF, Through Hole Mount, RADIAL LEADED
EPCOS
B32684A2333K000
Film Capacitor, Polypropylene, 2000V, 10% +Tol, 10% -Tol, 0.033uF, Through Hole Mount, RADIAL LEADED
EPCOS
B32684A2473J000
Film Capacitor, Polypropylene, 2000V, 5% +Tol, 5% -Tol, 0.047uF, Through Hole Mount, RADIAL LEADED
EPCOS
B32684A2473K000
Film Capacitor, Polypropylene, 2000V, 10% +Tol, 10% -Tol, 0.047uF, Through Hole Mount, RADIAL LEADED
EPCOS
©2020 ICPDF网 联系我们和版权申明