B39212B1668U510 [TDK]

SAW Components SAW RF low loss filter;
B39212B1668U510
型号: B39212B1668U510
厂家: TDK ELECTRONICS    TDK ELECTRONICS
描述:

SAW Components SAW RF low loss filter

文件: 总7页 (文件大小:173K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SAW Components  
SAW RF low loss filter  
Satellite CSS  
Series/type:  
B1668  
Ordering code:  
B39212-B1668-U510  
Date:  
Version:  
October 01, 2010  
2.0  
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information  
contained therein without EPCOS' prior express consent is prohibited.  
EPCOS AG is a TDK Group Company.  
SAW Components  
SAW RF low loss filter  
Data sheet  
B1668  
2040.00 MHz  
Application  
Low-loss RF filter for digital video  
Impedance transformation from 200 to 50 Ω  
Balanced to unbalanced operation  
Usable passband 60.0 MHz  
Features  
Package size 3.0 x3.0 x 1.1 mm3  
Maximum height of 1.225 mm  
Package code DCC6D  
RoHS compatible  
Approximate weight 0.037 g  
Package for Surface Mount Technology (SMT)  
Ni, gold-plated terminals  
AEC-Q200 qualified component family  
Electrostatic Sensitive Device (ESD)  
Pin configuration  
4,6  
2  
Input balanced  
Output unbalanced  
1,3,5 To be grounded  
Please read cautions and warnings and  
important notes at the end of this document.  
2
October 01, 2010  
SAW Components  
SAW RF low loss filter  
Data sheet  
B1668  
2040.00 MHz  
Characteristics  
Temperature range for specification:  
Terminating source impedance:  
Terminating load impedance:  
T
ZS  
ZL  
= –40 ˚C to +85 ˚C  
=
=
200(balanced) and matching network  
50Ω  
min.  
typ.  
max.  
@ 25 ˚C  
2040.00  
Nominal frequency  
fN  
αmax  
MHz  
dB  
Maximum insertion attenuation  
2010.0 ... 2070.0 MHz  
3.0  
4.0  
Amplitude ripple  
in any 30MHz band (p-p)  
2010.0 ... 2070.0 MHz  
∆α  
1.1  
1.2  
2.5  
2.5  
dB  
dB  
Amplitude ripple (p-p)  
∆α  
2010.0 ... 2070.0 MHz  
Differential to common mode ratio  
(|Sdd21/Scd21|)  
2010.0 ... 2070.0 MHz  
16.0  
6.0  
19.0  
8.0  
dB  
dB  
dB  
Input return loss  
Output return loss  
6.0  
9.0  
Attenuation  
α
50.0 ... 900.0 MHz  
1180.0 ... 1650.0 MHz  
1650.0 ... 1710.0 MHz  
2140.0 ... 5000.0 MHz  
35  
30  
30  
16  
45  
40  
35  
20  
dB  
dB  
dB  
dB  
Group delay ripple (p-p)  
2010.0 ... 2070.0 MHz  
15  
35  
ns  
Please read cautions and warnings and  
important notes at the end of this document.  
3
October 01, 2010  
SAW Components  
SAW RF low loss filter  
Data sheet  
B1668  
2040.00 MHz  
Matching Network (element values depend on PCB layout)  
Lp = 22 nH  
Lp  
Maximum ratings  
Operable temperature range T  
Storage temperature range Tstg  
–40/+85 ˚C  
–40/+85 ˚C  
DC voltage  
VDC  
0
501)  
V
V
machine model, 1 pulse  
ESD voltage  
Input power at  
VESD  
source impedance 200 Ω  
2010.0 ...2070.0 MHz PIN  
0
dBm  
1)  
according to JESD22-A115A (machine model), 1 negative & 1 positive pulse.  
Transfer function  
Please read cautions and warnings and  
important notes at the end of this document.  
4
October 01, 2010  
SAW Components  
SAW RF low loss filter  
Data sheet  
B1668  
2040.00 MHz  
Transfer function (passband)  
Transfer function (wideband)  
Please read cautions and warnings and  
important notes at the end of this document.  
5
October 01, 2010  
SAW Components  
SAW RF low loss filter  
Data sheet  
B1668  
2040.00 MHz  
References  
Type  
B1668  
Ordering code  
Marking and package  
Packaging  
B39212-B1668-U510  
C61157-A7-A68  
F61074-V8168-Z000  
L_1126  
Date codes  
B1668_NB.s3p  
S-parameters  
B1668_WB.s3p  
see file header for port/pin assignment table.  
Soldering profile  
RoHS compatible  
S_6001  
defined as compatible with the following documents:  
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT  
AND OF THE COUNCIL of 27 January 2003 on the restriction  
of the use of certain hazardous substances in electrical and  
electronic equipment. 2005/618/EC from April 18th, 2005,  
amending Directive 2002/95/EC of the European Parliament  
and of the Council for the purposes of establishing the maxi-  
mum concentration values for certain hazardous substances in  
electrical and electronic equipment."  
Matching coils  
See Inductor pdf-catalog  
http://www.tdk.co.jp/tefe02/coil.htm#aname1  
and Data Library for circuit simulation  
http://www.tdk.co.jp/etvcl/index.htm  
For further information please contact your local EPCOS sales office or visit our webpage at  
www.epcos.com .  
Published by EPCOS AG  
Surface Acoustic Wave Components Division  
P.O. Box 80 17 09, 81617 Munich, GERMANY  
EPCOS AG 2010. This brochure replaces the previous edition.  
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or  
the international Representatives.  
Due to technical requirements components may contain dangerous substances. For information on  
the type in question please also contact one of our Sales Offices.  
Please read cautions and warnings and  
important notes at the end of this document.  
6
October 01, 2010  
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical  
requirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application.  
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar  
with them than the customers themselves. For these reasons, it is always ultimately  
incumbent on the customer to check and decide whether an EPCOS product with the  
properties described in the product specification is suitable for use in a particular customer  
application.  
2. We also point out that in individual cases, a malfunction of electronic components or  
failure before the end of their usual service life cannot be completely ruled out in the  
current state of the art, even if they are operated as specified. In customer applications  
requiring a very high level of operational safety and especially in customer applications in  
which the malfunction or failure of an electronic component could endanger human life or  
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by  
means of suitable design of the customer application or other action taken by the customer  
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained  
by third parties in the event of malfunction or failure of an electronic component.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as hazardous). Useful information on this will be found in our  
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more  
detailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order.  
We also reserve the right to discontinue production and delivery of products. Conse-  
quently, we cannot guarantee that all products named in this publication will always be  
available. The aforementioned does not apply in the case of individual agreements deviating  
from the foregoing for customer-specific products.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current  
version of the “General Terms of Delivery for Products and Services in the Electrical  
Industry” published by the German Electrical and Electronics Industry Association  
(ZVEI).  
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,  
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,  
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,  
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks  
registered or pending in Europe and in other countries. Further information will be found on  
the Internet at www.epcos.com/trademarks.  
7
October 01, 2010  

相关型号:

B39212B3669U410

SAW Tx filter W-CDMA IF
EPCOS

B39212B4302F210

Low-loss RF filter for mobile telephone
EPCOS
TDK

B39212B5156U410

SAW Components SAW RF filter
TDK

B39212B7641P510

SAW Duplexer 1950.0 / 2140.0 MHz
EPCOS

B39212B7642J110

SAW Duplexer 1950.0 / 2140.0 MHz
EPCOS

B39212B7643P510

SAW Duplexer 1950 / 2140 MHz
EPCOS

B39212B7646B310

Duplexer, 1950MHz(Tx), 2140MHz(Rx), ROHS COMPLIANT, SMD, QCS9T, 9 PIN
EPCOS

B39212B7680A710

SAW Duplexer WCDMA Band IV (AWS)
EPCOS

B39212B7684A710

Duplexer, 1950MHz(Tx), 2140MHz(Rx), ROHS COMPLIANT, SMD, 9 PIN
EPCOS

B39212B7695P810

Duplexer, 1950MHz(Tx), 2140MHz(Rx), ROHS COMPLIANT, SMD, 9 PIN
EPCOS

B39212B7697E110

Duplexer, 1950MHz(Tx), 2140MHz(Rx), ROHS COMPLIANT, SMD, 9 PIN
EPCOS