B65679 [TDK]
Ferrites and accessories;型号: | B65679 |
厂家: | TDK ELECTRONICS |
描述: | Ferrites and accessories |
文件: | 总11页 (文件大小:530K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ferrites and accessories
P 26 × 16
Core and accessories
Series/Type:
B65671, B65672, B65675, B65679
June 2013
Date:
Data Sheet
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
P 26 16
Core and accessories
Individual parts
Adjusting screw
Part no.
B65679
Page
6
Yoke
Core
B65675
5
B65671
B65672
3
4
Coil former
Insulating washer
Core
B65671
3
Threaded sleeve (glued-in)
Terminal carrier
B65675
5
Example of an assembly set
for printed circuit boards
Please read Cautions and warnings and
Important notes at the end of this document.
2
06/13
P 26 16
Core
B65671
■ To IEC 60133
■ Delivery mode: sets
Magnetic characteristics (per set)
with
without
center hole center hole
l/A
le
Ae
Amin
Ve
0.4
37.2
93
76.5
3460
0.37
40
108
87
mm–1
mm
mm2
mm2
mm3
4320
Approx. weight (per set)
m
21
23
g
Gapped
Material AL value
s
e
Ordering code 1)
approx.
-D with center hole
nH
mm
-T with threaded sleeve
K1
100 3%
0.90
32
B65671+0100A001
M33
100 3%
160 3%
1.52
0.78
32
51
B65671+0100A033
B65671+0160A033
N48
160 3%
250 3%
315 3%
400 3%
630 3%
800 3%
1000 5%
0.80
0.40
0.34
0.24
0.15
0.11
0.10
51
80
B65671+0160A048
B65671+0250A048
B65671+0315A048
B65671+0400A048
B65671+0630A048
B65671+0800A048
B65671D1000J048
100
127
201
255
318
Ungapped
Material AL value
e
PV
Ordering code
-D with center hole
-W without center hole
nH
W/set
N48
N30
T38
N87
4900 +30/–20% 1560
9700 +30/–20% 2860
22000 +40/–30% 6480
B65671D0000R048
B65671W0000R030
B65671W0000Y038
5500 +30/–20% 1620 < 1.9 (200 mT, 100 kHz, 100 °C) B65671W0000R087
1) Replace the + by the code letter ”D“ or ”T“ for the required version.
Please read Cautions and warnings and
Important notes at the end of this document.
3
06/13
P 26 16
Accessories
B65672
Coil former
Standard:
Material:
to IEC 60133
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
max. operating temperature 155 °C), color code black
F
®
Valox 420-SE0 E45329 (M) , SABIC INNOVATIVE PLASTICS
Winding:
see Data Book 2013, chapter “Processing notes, 2.1”
Coil former
Sections
Ordering code
AN
mm2
lN
mm
AR value
1
32.0
52
55
B65672B0000T001
Coil former
Please read Cautions and warnings and
Important notes at the end of this document.
4
06/13
P 26 16
Accessories
B65675
Mounting assembly for printed circuit boards
■ The set comprises a terminal carrier and a yoke
■ For snap-in connection
Terminal carrier
Material:
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
max. operating temperature 155 °C), color code gray
F
Pocan B4235® E245249 (M) , LANXESS AG
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3.5 s
Yoke
Spring yoke, made of tinned nickel silver (0.4 mm), with ground terminal
Complete mounting assembly (8 solder terminals)
Ordering code: B65675B0005X000
Grounding pin
This recess must be on the side of the
grounding pin to ensure that the yoke
locks into position.
Hole arrangement
View in mounting direction
Ground
a) Yoke
b) Terminal carrier with 8 solder terminals
Please read Cautions and warnings and
Important notes at the end of this document.
5
06/13
P 26 16
Accessories
B65679
Adjusting screw
■ Tube core with thread and core brake made of GFR polyterephthalate
Pocan B3235® E245249 (M) , LANXESS AG
Tube core
length (mm)
Ordering code
Material
N22
Color code
red
4.55 6.3
4.98 6.3
B65679E0003X022
B65679E0002X022
N22
black
Note:
Due to the limited distance between adjusting screw and internal borehole, the entire assembly
must be accurately centered.
Please read Cautions and warnings and
Important notes at the end of this document.
6
06/13
Ferrites and accessories
Cautions and warnings
Cautions and warnings
Mechanical stress and mounting
Ferrite cores have to meet mechanical requirements during assembling and for a growing number
of applications. Since ferrites are ceramic materials one has to be aware of the special behavior
under mechanical load.
As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing
or tensile load. Especially high cooling rates under ultrasonic cleaning and high static or cyclic loads
can cause cracks or failure of the ferrite cores.
For detailed information see chapter “Definitions”, section 8.1.
Effects of core combination on AL value
Stresses in the core affect not only the mechanical but also the magnetic properties. It is apparent
that the initial permeability is dependent on the stress state of the core. The higher the stresses are
in the core, the lower is the value for the initial permeability. Thus the embedding medium should
have the greatest possible elasticity.
For detailed information see chapter “Definitions”, section 8.2.
Heating up
Ferrites can run hot during operation at higher flux densities and higher frequencies.
NiZn-materials
The magnetic properties of NiZn-materials can change irreversible in high magnetic fields.
Processing notes
– The start of the winding process should be soft. Else the flanges may be destroid.
– To strong winding forces may blast the flanges or squeeze the tube that the cores can no more
be mount.
– To long soldering time at high temperature (>300 °C) may effect coplanarity or pin arrangement.
– Not following the processing notes for soldering of the J-leg terminals may cause solderability
problems at the transformer because of pollution with Sn oxyd of the tin bath or burned insulation
of the wire. For detailed information see chapter “Processing notes”, section 8.2.
– The dimensions of the hole arrangement have fixed values and should be understood as
a recommendation for drilling the printed circuit board. For dimensioning the pins, the group
of holes can only be seen under certain conditions, as they fit into the given hole arrangement.
To avoid problems when mounting the transformer, the manufacturing tolerances for positioning
the customers’ drilling process must be considered by increasing the hole diameter.
7
06/13
Ferrites and accessories
Symbols and terms
Symbols and terms
Symbol
Meaning
Unit
A
Cross section of coil
mm2
mm2
Ae
AL
AL1
Amin
AN
AR
B
Effective magnetic cross section
Inductance factor; AL = L/N2
Minimum inductance at defined high saturation ( a)
Minimum core cross section
Winding cross section
Resistance factor; AR = RCu/N2
RMS value of magnetic flux density
Flux density deviation
Peak value of magnetic flux density
Peak value of flux density deviation
DC magnetic flux density
Remanent flux density
Saturation magnetization
Winding capacitance
nH
nH
mm2
mm2
= 10–6
Vs/m2, mT
Vs/m2, mT
Vs/m2, mT
Vs/m2, mT
Vs/m2, mT
Vs/m2, mT
Vs/m2, mT
F = As/V
mm–4.5
B
ˆ
B
ˆ
B
BDC
BR
BS
C0
CDF
DF
d
Ea
f
fcutoff
fmax
fmin
fr
Core distortion factor
Relative disaccommodation coefficient DF = d/i
Disaccommodation coefficient
Activation energy
Frequency
Cut-off frequency
Upper frequency limit
Lower frequency limit
Resonance frequency
Copper filling factor
J
s–1, Hz
s–1, Hz
s–1, Hz
s–1, Hz
s–1, Hz
fCu
g
Air gap
mm
H
ˆ
H
RMS value of magnetic field strength
Peak value of magnetic field strength
DC field strength
A/m
A/m
A/m
A/m
10–6 cm/A
10–6 cm/A
A
HDC
Hc
h
h/i
I
Coercive field strength
Hysteresis coefficient of material
Relative hysteresis coefficient
RMS value of current
2
IDC
Direct current
A
ˆ
I
Peak value of current
A
J
Polarization
Vs/m2
k
Boltzmann constant
J/K
k3
k3c
L
Third harmonic distortion
Circuit third harmonic distortion
Inductance
H = Vs/A
8
06/13
Ferrites and accessories
Symbols and terms
Symbol
Meaning
Unit
L/L
L0
LH
Relative inductance change
Inductance of coil without core
Main inductance
H
H
H
Lp
Parallel inductance
H
Lrev
Ls
Reversible inductance
Series inductance
H
H
le
lN
N
Effective magnetic path length
Average length of turn
Number of turns
mm
mm
PCu
Ptrans
PV
PF
Q
R
RCu
Rh
Copper (winding) losses
Transferrable power
Relative core losses
Performance factor
Quality factor (Q = L/Rs = 1/tanL)
Resistance
Copper (winding) resistance (f = 0)
Hysteresis loss resistance of a core
Rh change
W
W
mW/g
K/W
mm
°C
K
Rh
Ri
Rp
Internal resistance
Parallel loss resistance of a core
Series loss resistance of a core
Thermal resistance
Effective loss resistance of a core
Total air gap
Temperature
Temperature difference
Curie temperature
Rs
Rth
RV
s
T
T
TC
°C
s
t
Time
tv
Pulse duty factor
tan
tanL
tanr
tane
tanh
tan/i
U
Û
Ve
Z
Zn
Loss factor
Loss factor of coil
(Residual) loss factor at H 0
Relative loss factor
Hysteresis loss factor
Relative loss factor of material at H 0
RMS value of voltage
Peak value of voltage
Effective magnetic volume
V
V
mm3
/mm
Complex impedance
Normalized impedance |Z|n = |Z| /N (le/Ae)
2
9
06/13
Ferrites and accessories
Symbols and terms
Symbol
Meaning
Unit
Temperature coefficient (TK)
Relative temperature coefficient of material
Temperature coefficient of effective permeability
Relative permittivity
1/K
1/K
1/K
F
e
r
Magnetic flux
Vs
B
i
Efficiency of a transformer
Hysteresis material constant
Hysteresis core constant
mT-1
A–1H–1/2
s
Magnetostriction at saturation magnetization
Relative complex permeability
Magnetic field constant
Relative amplitude permeability
Relative apparent permeability
Relative effective permeability
Relative initial permeability
0
a
app
e
i
Vs/Am
p'
p"
r
Relative real (inductive) component of (for parallel components)
Relative imaginary (loss) component of (for parallel components)
Relative permeability
rev
s'
s"
tot
Relative reversible permeability
Relative real (inductive) component of (for series components)
Relative imaginary (loss) component of (for series components)
Relative total permeability
derived from the static magnetization curve
Resistivity
Magnetic form factor
DC time constant Cu = L/RCu = AL/AR
Angular frequency; = 2 f
m–1
mm–1
s
l/A
Cu
s–1
All dimensions are given in mm.
Surface-mount device
10 06/13
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the "General Terms of Delivery for Products and Services in the Electrical Industry"
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
11 06/13
相关型号:
©2020 ICPDF网 联系我们和版权申明