B82422H147410000 [TDK]
General Purpose Inductor,;
| 型号： | B82422H147410000 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | General Purpose Inductor, |
| 文件： | 总5页 (文件大小：237K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMT Inductors, SIMID Series
SIMID 1210−H
B82422H
Size 1210 (EIA) or 3225 (IEC)
Rated inductance 1 to 680 mH
Rated current 61 to 1150 mA
Construction
S Ferrite drum core
S Laser−welded winding
S Flame−retardant encapsulation
Features
S Very high current handling capability
S Suitable for reflow soldering acc. JEDEC J−STD 020C
S lead−free, RoHS−compatible
S qualified acc. AEC−Q200
Applications
S Filtering of supply voltages, coupling, decoupling
S DC/DC converters / switch mode power supplies
S Automotive electronics
S Telecommunications
Terminals
S Electro−plated
S Base material CuSn6
S 0,4mm Cu; 1−2mm Ag; 5−7mm Sn (lead-free)
Marking
Marking on component:
L value (in mH) and tolerance of L value (coded)
Date of manufacture (coded)
Delivery mode
8mm blister tape, reel packing 180mm Ø reel (2000 pcs) or 330mm Ø reel (7500 pcs)
Taping in accordance to IEC 60286−3. For details on taping and packing refer to data book
“Chokes and Inductors” and to Epcos Homepage.
Please read the important notes
at the end of this document
B82422−H1*−3−7659
28.06.2006
1
SMT Inductors, SIMID Series
SIMID 1210−H
B82422H
Dimensional drawing
Layout recommendation
Dimensions (mm)
Reflow soldering
A
B
C
D
2,70
1,15
2,10
4,40
Marking
1) Soldering area, tinned
Technical data and measuring conditions
Electrical specifications at T = 20°C
A
Rated inductance LR
Q factor Qmin
Measured with impedance analyzer HP 4294A
at frequency fL
Measured with impedance analyzer HP 4294A
at frequency fQ
Rated current IR
Maximum permissible DC with inductance decrease
DL/L0 v10% and temperature increase of v45K at
rated temperature of 105°C
Self−resonance frequency fres,min
DC resistance Rmax
Climatic category
Measured with network analyzer HP 8753
measuring current < IR
55/150/56 to IEC 60068−1
Solderability
lead-free to IEC 60068−2−58 and
Jedec J−STD 002B / JESD22−B102D
to IEC 60068−2−20 and MIL−STD−202, method 210
2mm (100mm long standard PCB)
Approx. 50mg
Resistance to soldering heat
Permissible PCB bending
Weight
Please read the important notes
at the end of this document
B82422−H1*−3−7659
28.06.2006
2
SMT Inductors, SIMID Series
SIMID 1210−H
B82422H
Characteristics and ordering codes
2)
LR
Toler−
ance
Qmin
fL;fQ
IR
Rmax
fres,min
MHz
Ordering code
1)
(ꢀ 180−mm reel)
mH
MHz
mA
Ω
Core material: ferrite
1,0
1,5
2,2
"10%
¢ K
8
8
8
7,96
7,96
7,96
1150
900
800
0,10
0,14
0,16
150
110
90
B82422H1102K000
B82422H1152K000
B82422H1222K000
3,3
4,7
6,8
"5%
¢J
"10%
¢K
8
8
8
7,96
7,96
7,96
770
700
570
0,18
0,25
0,35
70
46
35
B82422H1332+000
B82422H1472+000
B82422H1682+000
10
15
22
12
12
12
2,52
2,52
2,52
500
390
330
0,46
0,72
1,00
30
26
21
B82422H1103+000
B82422H1153+000
B82422H1223+000
33
47
68
15
15
15
2,52
2,52
2,52
280
230
180
1,40
2,10
3,40
15
12
10
B82422H1333+000
B82422H1473+000
B82422H1683+000
100
150
220
20
20
20
0,796
0,796
0,796
150
120
100
4,80
7,50
10,90
8,0
6,0
5,5
B82422H1104+000
B82422H1154+000
B82422H1224+000
330
470
680
20
20
20
0,796
0,796
0,796
90
76
61
13,00
20,00
31,00
4,5
3,5
3,0
B82422H1334+000
B82422H1474+000
B82422H1684+000
1) Closer tolerances and special versions upon request.
2) Replace the + by the code letter for the required inductance tolerance.
Please read the important notes
at the end of this document
3
B82422−H1*−3−7659
28.06.2006
SMT Inductors, SIMID Series
SIMID 1210−H
B82422H
Q factor versus frequency f
Current derating Iop/I R
measured with Agilent 4294A
versus ambient temperature TA
1,2
30
I
op
I
R
1
25
Q
680mH
100mH
20
0,8
0,6
0,4
0,2
10mH
15
1mH
10
5
0
0
0,1
1
10
0
20
40
60
80
100
120
160
°C
MHz
f
TA
Impedance |Z| versus frequency f
measured with Agilent 4294A
inductance L versus dc load current IDC
measured with LCR meter Agilent 4284A
100000
1000
680mH
680mH
100mH
10mH
10000
|Z|
L
100
100mH
mH
Ω
1mH
1000
100
10
10
10mH
1
1mH
0,1
1
0,01
10
100
1000
1
10
0,01
0,1
MHz
A
IDC
f
Please read the important notes
at the end of this document
B82422−H1*−3−7659
28.06.2006
4
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on ou r knowledge of typical
requirements that are often placed on ou r products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ul timately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In cust omer applications
requiring a very high level of operational safety and especially in cust omer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or lif e-saving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g. installation
of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be f ound in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have an y more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is tr ue of the corresponding product
specifications. Please check t herefore to what ext ent product descriptions and specif ications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap,
PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap,
WindCap are trademarks registered or pending in Eur ope and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
Page 5 of 5
相关型号：
B82422H1474K000
1 ELEMENT, 470uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD, CHIP, 1210, ROHS COMPLIANT
EPCOS
©2020 ICPDF网 联系我们和版权申明