B82422T3180K000
更新时间:2024-09-18 17:20:35
品牌:TDK
描述:General Purpose Inductor, 0.018uH, 10%, 1 Element, Ceramic-Core, SMD, 1210, ROHS COMPLIANT
B82422T3180K000 概述
General Purpose Inductor, 0.018uH, 10%, 1 Element, Ceramic-Core, SMD, 1210, ROHS COMPLIANT
B82422T3180K000 数据手册
通过下载B82422T3180K000数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载SMT inductors
SIMID series, SIMID 1210-T
Series/Type:
B82422T
Date:
October 2012
a~í~=pÜÉÉí
@ꢀEPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT inductors, SIMID series
SIMID 1210-T
B82422T
Size 1210 (EIA) or 3225 (IEC)
Rated inductance 0.010 ... 100 μH
Rated current 60 ... 450 mA
Construction
■ Ceramic or ferrite core
■ Laser-welded winding
■ Flame-retardant molding
Features
■ High Q factor
■ High resonance frequency
■ High L value
■ Qualified to AEC-Q200
■ Suitable for lead-free reflow soldering
as referenced in JEDEC J-STD 020D
■ RoHS-compatible
Applications
■ Filtering of supply voltages, coupling, decoupling
■ Antenna systems
■ Automotive electronics
■ Telecommunications
■ Consumer and data processing equipment
■ Industrial electronics
Terminals
■ Base material CuSn6
■ Layer composition Cu, Ag, Sn (lead-free)1)
■ Electro-plated
Marking
■ Marking on component:
Manufacturer and letter “T”, L value (in ꢁH),
tolerance of L value (coded), date of manufacture (YWWD)
■ Minimum data on reel:
Manufacturer, ordering code, L value, quantity, date of packing
Delivery mode and packing units
■ 8-mm blister tape, wound on 180-mm or 330-mm # reel
■ Packing units:
180-mm reel: 2000 pcs./reel
330-mm reel: 8000 pcs./reel
1) Ni-barrier-plated terminals (NiSn) on request (B82422T*50).
Please read Cautions and warnings and
Important notes at the end of this document.
2
10/12
SMT inductors, SIMID series
SIMID 1210-T
B82422T
Dimensional drawing and layout recommendation
0.5 0.21)
B
C
D
B
IND0053-6
3.2+0.3
A
B
C
D
2.7
1.15
2.1
4.4
2.5+0.3
0.15 max.
Marking
1) Soldering area
IND0073-6-E
Dimensions in mm
Taping and packing
Blister tape
Reel
12.75+0.15
4 0.1
_0
14.4 max.
Component
1.5+0.1
2 0.05
8.4+1.5
_0
62 1.5
_
<
4 0.1
2.6
1.0+0.2
Direction of unreeling
IND0592-V
IND0559-Z-E
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
3
10/12
SMT inductors, SIMID series
SIMID 1210-T
B82422T
Technical data and measuring conditions
Rated inductance LR
Q factor Qmin
Measured with impedance analyzer Agilent 4294A
at frequency fL, 0.1 V, +20 °C
Measured with impedance analyzer Agilent 4294A
at frequency fQ, +20 °C
Rated temperature TR
Rated current IR
+85 ꢂC
Maximum permissible DC with inductance decrease
ꢃL/L0 ꢄ 10% and temperature increase
of ꢄ 30 K at rated temperature
Measured with impedance analyzer Agilent E4991A /
network analyzer Agilent E8362B, +20 °C
Self-resonance frequency fres,min
DC resistance Rmax
Measured at +20 ꢂC
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: +(245 ꢅ5) °C, (5 ꢅ0.3) s
Wetting of soldering area ꢆ 90%
(based on IEC 60068-2-58)
Resistance to soldering heat
Climatic category
+260 ꢂC, 40 s (as referenced in JEDEC J-STD 020D)
55/125/56 (to IEC 60068-1)
Storage conditions
Mounted: –55 °C … +125 °C
Packaged: –25 °C … +40 °C, ꢄ 75% RH
Weight
Approx. 50 mg
Please read Cautions and warnings and
Important notes at the end of this document.
4
10/12
SMT inductors, SIMID series
SIMID 1210-T
B82422T
Characteristics and ordering codes
LR
Tolerance
Qmin
fL; fQ
MHz
IR
Rmax
fres,min
MHz
Ordering code1)2)
(# 180-mm reel)
ꢁH
mA
ꢇ
Core material: ceramic
^
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
ꢅ5% J
15
17
19
21
23
23
25
25
26
26
27
27
28
100
100
100
100
100
100
100
100
100
100
100
100
100
450
450
450
450
450
450
450
450
450
450
450
450
450
0.10
0.11
0.13
0.14
0.16
0.17
0.18
0.19
0.20
0.21
0.23
0.26
0.31
4000
3500
3000
2000
2000
1700
1700
1300
1300
1100
1000
1000
900
B82422T3100+000
B82422T3120+000
B82422T3150+000
B82422T3180+000
B82422T3220+000
B82422T3270+000
B82422T3330+000
B82422T3390+000
B82422T3470+000
B82422T3560+000
B82422T3680+000
B82422T3820+000
B82422T3101+000
^
ꢅ10% K
Core material: ferrite
^
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
ꢅ5% J
30
30
30
30
30
30
30
30
30
30
30
30
30
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
450
450
450
450
450
450
450
450
450
450
450
0.15
0.18
0.19
0.20
0.21
0.23
0.25
0.30
0.31
0.34
0.38
0.6
900
700
500
500
500
500
400
400
300
300
300
300
250
B82422T1121+000
B82422T1151+000
B82422T1181+000
B82422T1221+000
B82422T1271+000
B82422T1331+000
B82422T1391+000
B82422T1471+000
B82422T1561+000
B82422T1681+000
B82422T1821+000
B82422T1102+000
B82422T1122+000
^
ꢅ10% K
7.96 400
7.96 390
1.2
0.7
Closer tolerances and special versions on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82422X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
For reel size # 330 mm the last digit has to be an »8«. Example: B82422T3100K008
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50” (reel 180 mm) or “58” (reel 330 mm).
Please read Cautions and warnings and
Important notes at the end of this document.
5
10/12
SMT inductors, SIMID series
SIMID 1210-T
B82422T
Characteristics and ordering codes
LR
Tolerance
Qmin
fL; fQ
MHz
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
0.796
IR
Rmax
ꢇ
fres,min
MHz
200
140
100
70
60
60
50
45
40
35
30
25
20
20
20
20
17
16
15
12
9
Ordering code1)2)
(# 180-mm reel)
ꢁH
mA
370
350
320
290
260
250
220
200
180
170
150
140
130
120
110
80
^
1.5
ꢅ5% J
30
30
30
30
30
30
30
27
27
27
27
27
27
27
27
27
27
27
27
27
27
25
20
0.7
0.8
0.8
0.9
1.2
1.3
1.5
1.6
1.8
2.0
2.1
2.5
2.8
3.0
3.5
4.5
5.6
6.4
7.0
8.0
9.0
10
B82422T1152+000
B82422T1182+000
B82422T1222+000
B82422T1272+000
B82422T1332+000
B82422T1392+000
B82422T1472+000
B82422T1562+000
B82422T1682+000
B82422T1822+000
B82422T1103+000
B82422T1123+000
B82422T1153+000
B82422T1183+000
B82422T1223+000
B82422T1273+000
B82422T1333+000
B82422T1393+000
B82422T1473+000
B82422T1563+000
B82422T1683+000
B82422T1823+000
B82422T1104+000
^
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
ꢅ10% K
10
12
15
18
22
27
33
39
47
56
68
82
100
70
65
60
60
60
60
9
60
11
8
Closer tolerances and special versions on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82422X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
For reel size # 330 mm the last digit has to be an »8«. Example: B82422T1104K008
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50” (reel 180 mm) or “58” (reel 330 mm).
Please read Cautions and warnings and
Important notes at the end of this document.
6
10/12
SMT inductors, SIMID series
SIMID 1210-T
B82422T
Impedance |Z| versus frequency f
measured with impedance analyzer
Agilent E4991A, typical values at +20 °C
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4285A,
typical values at +20 °C
IND0075-W
IND0074-8
103
105
Ω
B82422T
B82422T
μH
L
100 μH
|Z|
102
104
103
102
101
10 μH
101
1 μH
100
_1
_2
_3
0.1 μH
10
10
10
100 μH
10 μH
1 μH
100 nH
10 nH
100
0.01 μH
_1
106
10
107
108
Hz 109
_2
_1
10
10
100
A
101
f
IDC
Q factor versus frequency f
Current derating Iop/IR
measured with impedance analyzer Agilent
E4991A, typical values at +20 °C
versus ambient temperature TA
(rated temperature TR = +85 °C)
IND0076-9
IND0077-H-E
100
1.2
B82422T
B82422T
Iop
90
Q
IR
1.0
80
70
0.8
0.6
0.4
0.2
0
60
0.01 μH
0.1 μH
50
0.12 μH
40
30
20
10
0
1 μH
10 μH
100 μH
105
106
107
108 Hz 109
f
0
20
40
60
80 100
C 140
TA
˚
7
10/12
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
8
10/12
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information will
be found on the Internet at www.epcos.com/trademarks.
9
10/12
B82422T3180K000 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
B82422T3180K008 | TDK | General Purpose Inductor, 0.018uH, 10%, 1 Element, Ceramic-Core, SMD, 1210, ROHS COMPLIANT | 获取价格 | |
B82422T3180X000 | EPCOS | SMT inductors | 获取价格 | |
B82422T3220 | EPCOS | SMT inductors | 获取价格 | |
B82422T3220-000 | EPCOS | SMT inductors | 获取价格 | |
B82422T3220000 | EPCOS | Flame-retardant molding | 获取价格 | |
B82422T3220J000 | TDK | Inductors (Coils) | 获取价格 | |
B82422T3220J008 | TDK | Inductors (Coils) | 获取价格 | |
B82422T3220K000 | TDK | Inductors (Coils) | 获取价格 | |
B82422T3220K008 | TDK | General Purpose Inductor, 0.022uH, 10%, 1 Element, Ceramic-Core, SMD, 1210, ROHS COMPLIANT | 获取价格 | |
B82422T3220K050 | TDK | General Purpose Inductor, 0.022uH, 10%, 1 Element, Ceramic-Core, SMD, 1210, ROHS COMPLIANT | 获取价格 |
B82422T3180K000 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6