B82793S0513N201 [TDK]
Telecom Filter, 1 Function(s), 0.8A, SMD, 4 PIN;型号: | B82793S0513N201 |
厂家: | TDK ELECTRONICS |
描述: | Telecom Filter, 1 Function(s), 0.8A, SMD, 4 PIN LTE PC |
文件: | 总12页 (文件大小:535K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data and signal line chokes
Common-mode chokes, ring core
0.005 … 47 mH, 100 … 1200 mA, 60 °C
Series/Type:
B82793C0/S0
Date:
a~í~=pÜÉÉí July 2010
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Data and signal line chokes
B82793C0/S0
Common-mode chokes, ring core
Rated voltage 42 V AC/80 V DC
Rated inductance 0.005 mH to 47 mH
Rated current 100 mA to 1200 mA
Construction
■ Current-compensated double choke
■ Ferrite core
■ LCP case (UL 94 V-0), silicone potting
■ Bifilar winding (B82793C0)
■ Sector winding (B82793S0)
Features
■ High rated currents, reduced components height
■ Qualified to AEC-Q200 (L ꢀꢁ4.7 mH)
■ Suitable for reflow soldering
■ RoHS-compatible
Function
■ B82793C0:
Suppression of asymmetrical interference coupled in on lines,
whereas data signals up to some MHz can pass unaffectedly.
■ B82793S0:
Suppression of asymmetrical and symmetrical interference (by Lstray
coupled in on lines. The high-frequency portions of the symmetrical
data signal are decreased so far that EMC problems can be
significantly reduced.
)
Applications
■ Automotive applications, e.g. CAN bus
■ Industrial applications
■ Types with LR ꢂꢁ4.7 mH only for telecom applications
Terminals
■ Base material CuSn6
■ Layer composition Ni, Sn
■ Hot-dipped
Marking
■ Marking on component: Manufacturer, process location (coded),
winding method (coded), ordering code (short form), date of manufacture (YWWD)
■ Minimum data on reel: Manufacturer, ordering code,
L value and tolerance, quantity, date of packing
Delivery mode and packing unit
■ 16-mm blister tape, wound on 330-mmꢁ#ꢁreel
■ Packing unit: 1500 pcs./reel
Please read Cautions and warnings and
Important notes at the end of this document.
2
07/10
Data and signal line chokes
B82793C0/S0
Common-mode chokes, ring core
Dimensional drawing and pin configuration
Layout recommendation
(4.5)
2.85
1.9 0.2
1.5 min.1)
1
4
2
3
1
4
2
3
10.2
IND0163-B
7.1 max.
6.0 max.
0.08
9+0.4
_0.2
Marking
1) Soldering area
IND0010-9-E
Dimensions in mm
Reel
Taping and packing
Blister tape
4 0.1
22.4 max.
13 0.25
1.5 0.1
2 0.05
6.0 max.
8 0.1
Direction of unreeling
16.4+2
60+2
_0
_0
IND0417-H-E
IND0422-K
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
3
07/10
Data and signal line chokes
B82793C0/S0
Common-mode chokes, ring core
Technical data and measuring conditions
Rated voltage VR
42 V AC (50/60 Hz) / 80 V DC
Rated temperature TR
Rated current IR
60 °C
Referred to 50 Hz and rated temperature
Rated inductance LR
Measured with Agilent 4284A, 0.1 mA, 20 °C
Measuring frequency: LR ꢀꢁ1 mH = 100 kHz
LR ꢂꢁ1 mH = 10 kHz
Inductance is specified per winding.
Inductance tolerance
ꢃ30% (LR ꢀ 0.47 mH), –30/+50% (LR ꢄ 1 mH) at 20 °C
ꢆꢁ10% at DC magnetic bias with IR, 20 °C
Inductance decrease ꢅL/L
Stray inductance Lstray,typ
Measured with Agilent 4284A, 5 mA, 20 °C, typical values
Measuring frequency: LR ꢀꢁ11 ꢇH = 1 MHz
LR ꢂꢁ11 ꢇH = 100 kHz
DC resistance Rtyp
Solderability
Measured at 20 ꢈC, typical values, specified per winding
SnPb:
(215 ꢃ3) °C, (3 ꢃ0.3) s
Sn96.5Ag3.0Cu0.5: (245 ꢃ5) °C, (3 ꢃ0.3) s
Wetting of soldering area ꢄꢁ95%
(to IEC 60068-2-58)
Resistance to soldering heat
Climatic category
(260 ꢃ5) °C, (10 ꢃ1) s (to IEC 60068-2-58)
40/125/56 (to IEC 60068-1)
–25 °C … +40 °C, ꢀꢁ75% RH
Approx. 0.25 g
Storage conditions (packaged)
Weight
Please read Cautions and warnings and
Important notes at the end of this document.
4
07/10
Data and signal line chokes
B82793C0/S0
Common-mode chokes, ring core
Characteristics and ordering codes
LR
Lstray,typ
nH
IR
Rtyp
Vtest
V DC, 2 s
250
Ordering code
mH
mA
1200
800
800
800
800
800
500
700
700
500
400
mꢉ
0.005
40
60
B82793C0502N201
B82793C0113N201
B82793C0253N201
B82793S0253N201
B82793C0513N201
B82793S0513N201
B82793C0104N201
B82793C0474N215
B82793C0105N265
B82793C0225N265
B82793C0475N265
0.011
0.025
0.025
0.051
0.051
0.10
0.47
1.0
50
80
110
110
140
140
180
170
140
400
550
250
60
250
1400
70
250
250
2300
100
100
70
250
250
750
750
2.2
120
250
750
4.7
750
For telecommunications
20
47
300
100
100
1800
3700
750
750
B82793C0206N265
B82793C0476N265
1200
Sample kit available. Ordering code: B82793X001.
For more information refer to chapter “Sample kits”.
Please read Cautions and warnings and
Important notes at the end of this document.
5
07/10
Data and signal line chokes
B82793C0/S0
Common-mode chokes, ring core
Insertion loss ꢊ (typical values at |Z| = 50 ꢉ, 20 °C)
asymmetrical, all branches in parallel (common mode)
symmetrical (differential mode)
LR = 0.005 mH
LR = 0.011 mH
IND0024-2
IND0023-T
50
50
dB
B82793C0113N201
B82793C0502N201
dB
α
α
40
40
30
20
10
0
30
20
10
0
104
105
106
107
108 Hz 109
f
104
105
106
107
108 Hz 109
f
LR = 0.025 mH (high Lstray
)
LR = 0.025 mH (low Lstray
)
IND0025-5
IND0367-5
50
50
B82793S0253N201
B82793C0253N201
dB
dB
α
α
40
40
30
20
10
0
30
20
10
0
104
105
106
107
108 Hz 109
f
104
105
106
107
108 Hz 109
f
Please read Cautions and warnings and
Important notes at the end of this document.
6
07/10
Data and signal line chokes
B82793C0/S0
Common-mode chokes, ring core
Insertion loss ꢊ (typical values at |Z| = 50 ꢉ, 20 °C)
asymmetrical, all branches in parallel (common mode)
symmetrical (differential mode)
LR = 0.051 mH (low Lstray
)
LR = 0.051 mH (high Lstray)
IND0368-7
IND0026-L
50
dB
50
B82793C0513N201
B82793S0513N201
dB
α
α
40
30
20
10
0
40
30
20
10
0
104
105
106
107
108 Hz 109
f
104
105
106
107
108 Hz 109
f
LR = 0.10 mH
LR = 0.47 mH
IND0366-A
IND0027-U
50
50
B82793C0104N201
B82793C0474N215
dB
dB
α
α
40
40
30
20
10
0
30
20
10
0
104
105
106
107
108 Hz 109
f
104
105
106
107
108 Hz 109
Please read Cautions and warnings and
Important notes at the end of this document.
7
07/10
Data and signal line chokes
B82793C0/S0
Common-mode chokes, ring core
Insertion loss ꢊ (typical values at |Z| = 50 ꢉ, 20 °C)
asymmetrical, all branches in parallel (common mode)
symmetrical (differential mode)
LR =1.0 mH
LR = 2.2 mH
IND0029-B
IND0028-3
50
50
B82793C0225N265
B82793C0105N265
dB
dB
α
α
40
40
30
20
10
0
30
20
10
0
104
105
106
107
108 Hz 109
f
104
105
106
107
108 Hz 109
f
LR = 4.7 mH
LR = 20 mH
IND0030-9
IND0883-T
50
60
B82793C0475N265
B82793C0206N265
dB
dB
50
α
α
40
40
30
20
10
0
30
20
10
0
104
105
106
107
108 Hz 109
f
104
105
106
107
108 Hz 109
f
Please read Cautions and warnings and
Important notes at the end of this document.
8
07/10
Data and signal line chokes
B82793C0/S0
Common-mode chokes, ring core
Insertion loss ꢊ (typical values at |Z| = 50 ꢉ, 20 °C)
asymmetrical, all branches in parallel (common mode)
symmetrical (differential mode)
Current derating Iop/IR
versus ambient temperature
LR = 47 mH
IND0681-C-E
IND0884-A
1.4
Iop
60
dB
B82793C0476N265
IR
1.2
1.0
0.8
0.6
0.4
0.2
0
α
50
TR = 60 C
40
30
20
10
˚
0
0
20
40
60
80 100
C
TA
140
104
105
106
107
108 Hz 109
f
˚
Please read Cautions and warnings and
Important notes at the end of this document.
9
07/10
Data and signal line chokes
B82793C0/S0
Common-mode chokes, ring core
Recommended reflow soldering curve
Pb containing solder material (based on CECC 00802 edition 2)
300
10 s
C
˚
260 C
˚
approx. 245 C
250
200
150
100
50
˚
10 s
215 C
˚
180 C
˚
approx.
40 s
130 C
˚
2 K/s
Normal curve
Limit curves
0
0
50
100
150
200
s
250
Time
IND0813-D-E
Pb-free solder material (based on JEDEC J-STD 020C)
t3
T4
T3
t2
T2
T1
t1
IND0814-F
T1
T2
°C
T3
°C
T4
°C
t1
s
t2
s
t3
s
°C
150
200
217
250
< 110
< 90
< 40 @ T4 –5 °C
Time from 25 °C to T4: max 300 s
Maximal numbers of reflow cycles: 3
Please read Cautions and warnings and
Important notes at the end of this document.
10 07/10
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
11 07/10
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the customer application or other action taken by the customer (e.g. installation of protective
circuitry or redundancy) that no injury or damage is sustained by third parties in the event of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap,
PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID,
SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or
pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
12 07/10
相关型号:
©2020 ICPDF网 联系我们和版权申明