B88069X8061T602 [TDK]
Switching spark gap;
| 型号： | B88069X8061T602 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Switching spark gap |
| 文件： | 总5页 (文件大小：128K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Switching spark gap
SSG without lead wires
Series/Type:
FS08HF1BSMD
Ordering code:
B88069X7391T602
Version/Date:
Issue 03 / 2008-11-05
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white" (or invisible). This ensures that the table disappears for the customer
PDF. To update the data sheet, click on the symbol "Preview" and then "Close". Please do not alter the header or
footer when copying the content.
Identification/Classification 1:
(header 1 + top left header bar)
Switching spark gap
SSG without lead wires
B88069X7391T602
FS08HF1BSMD
Identification/Classification 2:
(header 2 + bottom left header bar)
Ordering code:
(top right header bar)
Series/Type:
(top right header bar)
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
Preliminary data (optional):
contained therein without EPCOS' prior express consent is prohibited.
(if necessary)
Department:
KB AB E / KB AB PM
Issue 03 / 2008-11-05
EPCOS AG is a TDK Group Company.
Date:
Switching spark gap
B88069X7391T602
FS08HF1BSMD
SSG without lead wires
Features
Applications
. Ignition of HID lamps
.
.
.
Extremely long life time
Stable performance over life
Insensitive performance against variations in
temperature
.
.
.
.
.
Very low switching losses
Very short breakdown time
High reliability by robust design
Excellent SMD handling
RoHS compatible
Electrical specifications
Nominal breakdown voltage Vn
800
V
Initial values 2)
1)
Static breakdown voltage Vs
First ignition value Vs, fte after 24 hours in darkness
Following ignition values Vs, fiv
950
704 ... 896
V
V
Electrical life time 3)
Breakdown voltage Vb
First ignition value VB, FTE after 24 hours in darkness
V
ms
V
1000
60
680 ... 920
Ignition time tI at V0 during life
Following ignition values VB, FIV
Switching operations
at –40 °C
at +25; 125; 150 °C
40 000
200 000
Ignitions
Ignitions
Test circuit parameters
Open circuit voltage Vo
Loading resistance R
Discharge capacitance C
Inductance L
1000
68
100
0.4
V
k
nF
µH
A
650
Discharge peak current Ip
General technical data
Insulation resistance at 100 V
Early ignition values below 704 V
Breakdown time
> 100
1
50
200
50
M
%
ns
Hz
mA
g
Maximum switching frequency
Maximum loading current
Weight
~ 2
300
Storage at +170 °C
h
KB AB E / KB AB PM
Issue 03 / 2008-11-05
Please read Cautions and warnings and
Page 2 of 5
Important notes at the end of this document.
Switching spark gap
B88069X7391T602
FS08HF1BSMD
SSG without lead wires
Marking, green positive
800 WWY O
800
WW
Y
- Nominal voltage
- Calendar week of production
- Year of production
O
- Non radioactive
1)
At delivery AQL 0,65 level II, DIN ISO 2859
Page 2, Fig. 1 and 2
Page 2, Fig. 3 and 4
2)
3)
Figures
Fig. 1: QC- test circuit (100% outgoing inspection)
Fig. 2: Explanation of measurands
I = const
51k
VS, FTE
VS, FIV
VS
DUT
VN
VS
0,22 F
ICU
- VN
DUT device under test
ICU ignition control unit (sensitivity 10 ... 30 A)
Discharge current 10 ... 20 mA
dVS/dt ~ dVN/dt
Fig. 4: Explanation of measurands
Fig. 3: QC- test circuit (sampling inspection at 25 °C)
VB, FTE
VB, FTE
L
R
Range of VB, FIV
Early ignition
VB
VN
VB
VO
DUT
C
t
tI
10 s
1 s
KB AB E / KB AB PM
Issue 03 / 2008-11-05
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 5
Switching spark gap
B88069X7391T602
FS08HF1BSMD
SSG without lead wires
Dimensional drawing in mm
Ordering code and packing advice
B88069X7391T602 = 600 pcs. on SMD-tape
Cautions and warnings
.
.
Switching spark gaps may be used only within their specified values.
Damaged switching spark gaps must not be re-used.
KB AB E / KB AB PM
Issue 03 / 2008-11-05
Please read Cautions and warnings and
Page 4 of 5
Important notes at the end of this document.
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or
pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
Page 5 of 5
相关型号：
©2020 ICPDF网 联系我们和版权申明