CD45-B2GA331K-NKA [TDK]
CAP CER 330PF 440VAC RADIAL;型号: | CD45-B2GA331K-NKA |
厂家: | TDK ELECTRONICS |
描述: | CAP CER 330PF 440VAC RADIAL 电容器 |
文件: | 总9页 (文件大小:157K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
C A P A C I T O R S
February 2016
Disc Type Capacitors with Lead
High Voltage Ceramic Capacitors
Commercial Grade, Safety Standard Approved
CD45series
Type:
CD45 [SL, B, E characteristics, Eac: X1=440V, Y1=400V]
(2/9)
C A P A C I T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
Please refer to the guideline of notabilia for fixed ceramic capacitors issued by JEITA(Japan Electronics and Information Technology
Association, EIAJ RCR-2335).
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20160219 / leaddisc_commercial_cd45_en.
(3/9)
C A P A C I T O R S
Product compatible with RoHS directive
Halogen-free
Disc Type Capacitors with Lead
High Voltage Ceramic Capacitors, Commercial Grade, Safety Standard Approved
Overview of CD45 Series
FEATURES
Compliant with IEC and the safety standards of various countries.
This ceramic capacitor meets reinforced insulation's Safety Standards.
Since it is rated at a withstand voltage of AC.4000V, it can be used in single-unit configurations within European Class II devices.
Flame-resistant reinforced outer insulation prevents fires, electrical shock, and other potential hazards.
These products shall conform to RoHS Directive due to lead(Pb) free of lead wire and internal solder material.
Compatible with halogen-free external resin coating.
APPLICATION
For use in Y capacitor for AC adapter, charger, power supplies
PART NUMBER CONSTRUCTION
CD45 -
E
2GA
102
M
-
K
A
□
Nominal
capacitance
Capacitance
tolerance
Application
classification
Temperature
characteristics
ꢀ
Lead type
Internal code
Series name
Rated voltage
100
10pF
J
K
M
5%
G
N
V
Long lead
Short lead
Taping
A
Halogen-free
+350 to
–1000ppm/°C
X1: 440V
2GA
Safety
K
SL
Y1: 400V
standard
102
222
1,000pF
2,200pF
10%
20%
B
E
10%
+20, –55%
ꢀ Please refer to P-6 ~ 8 about the product dimensions.
OPERATING TEMPERATURE RANGE
ꢀ
Temperature range
Temperature
characteristics
ꢀꢀ
Operating temperature
Storage temperature
(°C)
(°C)
SL
B
E
–25 to +125
–25 to +125
–25 to +125
–25 to +125
–25 to +125
–25 to +125
ꢀꢁ
The maximum operating temperature of 125°C includes capacitor self-generated heat of up to 20°C.
The storage temperature range applies to after MLCC is mounted on board.
ꢀꢀꢁ
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_commercial_cd45_en.
(4/9)
C A P A C I T O R S
Overview of CD45 Series
PACKAGE QUANTITY
Package quantity
Type
Taping (pieces / box)
Bulk (pieces / bag)
1000
CD45
1000
CERTIFIED STATUS OF VARIOUS COUNTRIES
Approval report No.*
Taiwan Xiamen
Safety
standard
ENEC
UL
cUL/CSA
SAA
Temperature
characteristics
Rated
voltage
IEC standard No. Standard No.
EN 60384-14
Class
ENEC-01048
UL60384-14
E37861
X1:440V AC
Y1:400V AC
X1, Y1
IEC 60384-14
AS3250
SL,B,E
CS6268
CQC
IEC 60384-14
CQC14001112767 CQC14001112447
X1
Y1
440V AC
400V AC
SZ03001-12002
SZ03001-12004
SU03047-12002
SU03047-12004
KTL
K60384-14
* Certificate numbers shall be changed owing to the revisions of the related standards.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_commercial_cd45_en.
(5/9)
C A P A C I T O R S
Overview of CD45
RECOMMENDED FLOW PROFILE
Soldering
Preheating
T2
Natural
cooling
T1
t1
t2
t3
t: Time
Preheating
Temp.
T1
Peak
Temp.
T2
Natural cooling
Time
t3
Time
t1
Time
t2
110°C min.
30 to 60s.
260°C
Within 10s.
Over 60s.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_commercial_cd45_en.
(6/9)
C A P A C I T O R S
CD45 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: SL (+350 to -1000ppm/°C)
Rated Voltage Eac: X1=440V, Y1=400V
Dimensions (mm)
Capacitance
(pF)
Capacitance
tolerance
F
F
Part No.ꢀ
D max.
T max.
d
(Applied to bulk) (Applied to taping)
CD45SL2GA100J-□KAꢀꢀ
CD45SL2GA150J-□KA
CD45SL2GA220J-□KA
CD45SL2GA330J-□KA
CD45SL2GA470J-□KA
CD45SL2GA680J-□KA
10
15
22
33
47
68
5%
5%
5%
5%
5%
5%
7.0
7.0
7.0
7.0
8.0
9.0
6.0
6.0
6.0
6.0
6.0
6.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0 1.0
10.0 1.0
10.0 1.0
10.0 1.0
10.0 1.0
10.0 1.0
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
* The part numbers are TDK’s standard specification products.
ꢀꢀ The " □ " of the Part Number contains the lead wire type G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-9 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
D
T
D
T
D
T
Vertical kink
F
d
F
d
F
d
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Item
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
Markings
CD
10
Specifications
CD45 series
10pF
5%
X1: AC.440V
Y1: AC.400V
Marking examples
Front
Back
54
J
CD
10J
440~X1
400~Y1
5. TDK’s logogram
6. Date code
Production base code
2015.4ꢀ
54
(
)
Marking position is reference.
ꢀ
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
ꢀ
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_commercial_cd45_en.
(7/9)
C A P A C I T O R S
CD45 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: B ( 10%)
Rated Voltage Eac: X1=440V, Y1=400V
Dimensions (mm)
Capacitance
(pF)
Capacitance
tolerance
F
F
Part No.ꢀ
D max.
T max.
d
(Applied to bulk) (Applied to taping)
CD45-B2GA101K-□KAꢀꢀ
CD45-B2GA151K-□KA
CD45-B2GA221K-□KA
CD45-B2GA331K-□KA
CD45-B2GA471K-□KA
100
150
220
330
470
10%
10%
10%
10%
10%
6.5
6.5
6.5
7.0
8.0
6.0
6.0
6.0
6.0
6.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0 1.0
10.0 1.0
10.0 1.0
10.0 1.0
10.0 1.0
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
* The part numbers are TDK’s standard specification products.
ꢀꢀ The " □ " of the Part Number contains the lead wire type G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-9 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
D
T
D
T
D
T
Vertical kink
F
d
F
d
F
d
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Item
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
Markings
CD
101
Specifications
CD45 series
100pF
10%
X1: AC.440V
Y1: AC.400V
Marking examples
Front
Back
54
K
CD
101K
440~X1
400~Y1
5. TDK’s logogram
6. Date code
Production base code
2015.4ꢀ
54
(
)
Marking position is reference.
ꢀ
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
ꢀ
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_commercial_cd45_en.
(8/9)
C A P A C I T O R S
CD45 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: E (+20, –55%)
Rated Voltage Eac: X1=440V, Y1=400V
Dimensions (mm)
Capacitance
(pF)
Capacitance
tolerance
F
F
Part No.ꢀ
D max.
T max.
d
(Applied to bulk) (Applied to taping)
CD45-E2GA681M-□KAꢀꢀ
CD45-E2GA102M-□KA
CD45-E2GA152M-□KA
CD45-E2GA222M-□KA
CD45-E2GA332M-□KA
CD45-E2GA472M-□KA
680
1,000
1,500
2,200
3,300
4,700
20%
20%
20%
20%
20%
20%
6.5
7.0
8.0
9.0
11.0
13.0
6.0
6.0
6.0
6.0
6.0
6.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0+2.0, –1.0
10.0 1.0
10.0 1.0
10.0 1.0
10.0 1.0
10.0 1.0
10.0 1.0
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
* The part numbers are TDK’s standard specification products.
ꢀꢀ The " □ " of the Part Number contains the lead wire type G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-9 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
D
T
D
T
D
T
Vertical kink
F
d
F
d
F
d
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Item
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
Markings
CD
102
Specifications
CD45 series
1000pF
20%
X1: AC.440V
Y1: AC.400V
Marking examples
Front
Back
54
M
CD
102M
440~X1
400~Y1
5. TDK’s logogram
6. Date code
Production base code
2015.4ꢀ
54
(
)
Marking position is reference.
ꢀ
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
ꢀ
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_commercial_cd45_en.
(9/9)
C A P A C I T O R S
CD45 Type
TAPING DIMEMSIONS
P2
P
P1
D
T
Δh
Δh
S
D0
F
P
0
ød
Item
Symbol Dimensions(mm)
Remarks
Body diameter
Body thickness
D
Depends on the specification of each product.
T
Depends on the specification of each product.
Lead-wire diameter
Pitch of component
Feed hole pitch
ød
P
0.6 0.05
15.0 0.10
15.0 0.3
10.0 0.7
15.0 1.3
10 1
Including the slant of body
P0
P1
Excepting the tape splicing part
Feed hole center to lead
Feed hole center to component center P2
Lead-to lead distance
Component alignment
Tape width
F
Measuring point is bottom kink
ꢂh
W
0 2.0
Including the slanting body due to bending lead-wire
18.0+1.0, –0.5
10.0min.
9.0 0.5
Adhesive tape width
Hole position
W0
W1
W2
H0
H1
Adhesive tape position
Bottom of kink from tape center
Height of body from tape center
Lead-wire protrusion
Feed hole diameter
Total tape thickness
Length of snipped lead
Coating on lead
4.0max.
16.0+1.5, –0.5
46.0max.
1.0max.
4.0 0.2
Adhesive tape do not stick out the tape
D0
t
0.6 0.3
Including adhesive tape
L
11.0max.
4.0max.
4.0max.
2.0max.
C
A
S
Height of kink
Measuring point is bottom kink
Spring action
AMMO PACK INNER BOX SIZE
Dimensions in mm
340max.
• For more information about products with other capacitance or other data, please contact us.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_commercial_cd45_en.
相关型号:
CD45-E2GA102M-NKA
Ceramic Capacitor, Ceramic, 20% +Tol, 20% -Tol, E, -55/+20% TC, 0.001uF, Through Hole Mount, RADIAL LEADED
TDK
©2020 ICPDF网 联系我们和版权申明