CK45-R3DD471K-VRA [TDK]
Ceramic Capacitor, Ceramic, 2000V, 10% +Tol, 10% -Tol, R, -30/+15% TC, 0.00047uF, Through Hole Mount, 3320, RADIAL LEADED;
| 型号： | CK45-R3DD471K-VRA |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Ceramic Capacitor, Ceramic, 2000V, 10% +Tol, 10% -Tol, R, -30/+15% TC, 0.00047uF, Through Hole Mount, 3320, RADIAL LEADED 电容器 |
| 文件： | 总7页 (文件大小：140K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
C A P A C I T O R S
February 2016
Disc Type Capacitors with Lead
High Voltage Ceramic Capacitors
Automotive Grad, Low dissipation at high frequency
CK45-RRseries
Type:
CK45-R [R characteristics, Edc: 1kV to 2kV]
(2/7)
C A P A C I T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in automotive electronic equipment under a normal operation and use
condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
Please refer to the guideline of notabilia for fixed ceramic capacitors issued by JEITA(Japan Electronics and Information Technology
Association, EIAJ RCR-2335).
When designing your equipment even for automotive-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20160219 / leaddisc_automotive_ck45-rr_en.
(3/7)
C A P A C I T O R S
Product compatible with RoHS directive
Halogen-free
Disc Type Capacitors with Lead
High Voltage Ceramic Capacitors, Automotive Grad, Low dissipation at high frequency
Overview of CK45-RR Series
FEATURES
AEC-Q200 compliant.
1,000 cycles guaranteed under heat shock testing at –55°C to +125°C.
It can be used as a capacitor for snubber circuits used in automobiles (EV, HEV).
Low dissipation factor, and decreased self-heating temperature in the high frequency, and high voltage application.
These products shall conform to RoHS Directive due to lead(Pb) free of lead wire and internal solder material.
Compatible with halogen-free external resin coating.
APPLICATION
For use in snubber circuit protection for battery chargers used in automobiles.
PART NUMBER CONSTRUCTION
CK45 -
R
3AD
102
K
A
R
A
□
Nominal
capacitance
Capacitance
tolerance
Grade
classification
Application
classification
Series
Temperature
characteristics
Rated
voltage
Lead type
Internal code
ꢀ
name
R
+15, –30%
3AD 1kV
3DD 2kV
101 100pF
222 2,200pF
K
10%
G
N
V
Long lead
Short lead
Taping
R
Low dissipation
A Halogen-free
For use in
automobiles
A
ꢀ Please refer to P-5~6 about the product dimensions.
OPERATING TEMPERATURE RANGE
ꢀ
Temperature range
Temperature
characteristics
ꢀꢀ
Operating temperature
Storage temperature
（°C）
（°C）
R
–40 to +125
–40 to +125
ꢀꢁꢁ
The maximum operating temperature of 125°C includes capacitor self-generated heat of up to 20°C.
The storage temperature range applies to after MLCC is mounted on board.
ꢀꢀꢁ
PACKAGE QUANTITY
Package quantity
Type
Taping (pieces / box)
Bulk (pieces / bag)
1000
CK45-R
1000
ꢀ
500 pieces applies to the following part.
CK45-R3AD222KAVRA
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_ck45-rr_en.
(4/7)
C A P A C I T O R S
Overview of CK45-RR Series
RECOMMENDED FLOW PROFILE
Soldering
Preheating
Natural
cooling
T2
T1
t1
t2
t3
t: Time
Preheating
Temp.
T1
Peak
Temp.
T2
Natural cooling
Time
t3
Time
t1
Time
t2
110°C min.
30 to 60s.
260°C
Within 10s.
Over 60s.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_ck45-rr_en.
(5/7)
C A P A C I T O R S
CK45-R Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: R (+15, –30%)
Rated Voltage Edc: 1kV
Dimensions (mm)
Taping
dimensionsꢀꢀꢀ
Capacitance
(pF)
Capacitance
tolerance
F
F
Part No.ꢀ
D max. T max.
d
(Applied to bulk) (Applied to taping)
CK45-R3AD101KA□RAꢀꢀ
CK45-R3AD151KA□RA
CK45-R3AD221KA□RA
CK45-R3AD331KA□RA
CK45-R3AD471KA□RA
CK45-R3AD681KA□RA
CK45-R3AD102KA□RA
CK45-R3AD152KA□RA
CK45-R3AD222KA□RA
100
150
220
330
470
10%
10%
10%
10%
10%
10%
10%
10%
10%
6.0
6.0
7.0
7.5
8.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0 1.5
5.0 1.5
5.0 1.5
5.0 1.5
5.0 1.5
5.0 1.5
5.0 1.5
7.5 1.5
7.5 1.5
5.0+0.8,-0.2
5.0+0.8,-0.2
5.0+0.8,-0.2
5.0+0.8,-0.2
5.0+0.8,-0.2
5.0+0.8,-0.2
5.0+0.8,-0.2
7.5 0.8
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
V1
V1
V1
V1
V1
V1
V1
V2
V3
680
9.5
1,000
1,500
2,200
11.0
12.5
15.0
7.5 0.8
* The part numbers are TDK’s standard specification products.
ꢀꢀ The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
ꢀꢀꢀꢁPlease refer to P-7 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
D
T
D
T
D
T
Vertical kink
F
d
F
d
F
d
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_ck45-rr_en.
(6/7)
C A P A C I T O R S
CK45-R Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: R (+15, –30%)
Rated Voltage Edc: 2kV
Dimensions (mm)
Taping
dimensionsꢀꢀꢀ
Capacitance
(pF)
Capacitance
tolerance
F
F
Part No.ꢀ
D max. T max.
d
(Applied to bulk) (Applied to taping)
CK45-R3DD101KA□RAꢀꢀ
CK45-R3DD151KA□RA
CK45-R3DD221KA□RA
CK45-R3DD331KA□RA
CK45-R3DD471KA□RA
CK45-R3DD681KA□RA
CK45-R3DD102KA□RA
100
150
220
330
470
10%
10%
10%
10%
10%
10%
10%
6.0
7.0
7.5
8.5
9.5
6.0
6.0
6.0
6.0
6.0
6.0
6.0
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
V2
V2
V2
V2
V2
V2
V2
680
1,000
10.5
12.5
* The part numbers are TDK’s standard specification products.
ꢀꢀ The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
ꢀꢀꢀꢁPlease refer to P-7 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
D
T
D
T
D
T
Vertical kink
F
d
F
d
F
d
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_ck45-rr_en.
(7/7)
C A P A C I T O R S
CK45-R Type
TAPING DIMEMSIONS
P
D
T
P
T
D
P2
P2
Δh
Δh
Δh
Δh
S
S
P
0
P
1
F
P
1
F
D
0
D0
ød
ød
P
0
V3
V1, V2
Dimensions(mm)
Item
Symbol
Remarks
V1
V2
V3
Body diameter
Body thickness
D
Depends on the specification of each product.
Depends on the specification of each product.
T
Lead-wire diameter
Pitch of component
Feed hole pitch
ød
P
0.6 0.05
12.7 1.0
12.7 0.3
3.85 0.7
6.35 1.3
5+0.8, –0.2
0 2.0
0.6 0.05
15.0 1.0
15.0 0.3
3.75 0.7
7.5 1.3
7.5 0.8
0 2.0
0.6 0.05
30.0 1.0
15.0 0.3
3.75 0.7
7.5 1.3
7.5 0.8
0 2.0
Including the slant of body
P0
P1
Excepting the tape splicing part
Feed hole center to lead
Feed hole center to component center P2
Lead-to lead distance
Component alignment
Tape width
F
Measuring point is bottom kink
ꢂh
W
Including the slanting body due to bending lead-wire
Adhesive tape do not stick out the tape
18.0+1.0, –0.5 18.0+1.0, –0.5 18.0+1.0, –0.5
Adhesive tape width
Hole position
W0
W1
W2
H0
H1
10.0min.
9.0 0.5
4.0max.
10.0min.
9.0 0.5
4.0max.
10.0min.
9.0 0.5
4.0max.
Adhesive tape position
Bottom of kink from tape center
Height of body from tape center
Lead-wire protrusion
Feed hole diameter
Total tape thickness
Length of snipped lead
Coating on lead
16.0+1.5, –0.5 16.0+1.5, –0.5 16.0+1.5, –0.5
46.0max.
1.0max.
4.0 0.2
0.6 0.3
11.0max.
4.0max.
4.0max.
2.0max.
46.0max.
1.0max.
4.0 0.2
0.6 0.3
11.0max.
4.0max.
4.0max.
2.0max.
46.0max.
1.0max.
4.0 0.2
0.6 0.3
11.0max.
4.0max.
4.0max.
2.0max.
D0
t
Including adhesive tape
L
C
A
S
Height of kink
Measuring point is bottom kink
Spring action
AMMO PACK INNER BOX SIZE
Dimensions in mm
340max.
• For more information about products with other capacitance or other data, please contact us.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_ck45-rr_en.
相关型号：
CK45-R3DD561K-NR
Ceramic Capacitor, Ceramic, 2000V, 10% +Tol, 10% -Tol, R, -30/+15ppm/Cel TC, 0.00056uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
TDK
CK45-R3DD821K-NR
Ceramic Capacitor, Ceramic, 2000V, 10% +Tol, 10% -Tol, R, -30/+15ppm/Cel TC, 0.00082uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
TDK
CK45-R3FD101K-NRA
Ceramic Capacitor, Ceramic, 3000V, 10% +Tol, 10% -Tol, R, -30/+15% TC, 0.0001uF, Through Hole Mount, 2424, RADIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
TDK
CK45-R3FD102K-NRA
Ceramic Capacitor, Ceramic, 3000V, 10% +Tol, 10% -Tol, R, -30/+15% TC, 0.001uF, Through Hole Mount, 4724, RADIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
TDK
CK45-R3FD121K-NR
Ceramic Capacitor, Ceramic, 3000V, 10% +Tol, 10% -Tol, R, -30/+15ppm/Cel TC, 0.00012uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
TDK
CK45-R3FD151K-NRA
Ceramic Capacitor, Ceramic, 3000V, 10% +Tol, 10% -Tol, R, -30/+15% TC, 0.00015uF, Through Hole Mount, 2824, RADIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
TDK
©2020 ICPDF网 联系我们和版权申明