首页 |元器件品牌

CLF5030NIT-330M-D [TDK]

SMD/SMT 电感器(线圈);
CLF5030NIT-330M-D
型号： CLF5030NIT-330M-D
厂家： TDK ELECTRONICS    TDK ELECTRONICS
描述：

SMD/SMT 电感器(线圈)

电感器
文件： 总10页 (文件大小：214K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
I N D U C T O R S  
January 2018  
Inductors for power circuits  
Wound ferrite  
CLF-NI-D series (for automotive)  
CLF5030NI-Dtype  
CLF5030NI-D  
(2/10)  
I N D U C T O R S  
REMINDERS FOR USING THESE PRODUCTS  
Before using these products, be sure to request the delivery specifications.  
SAFETY REMINDERS  
Please pay sufficient attention to the warnings for safe designing when using these products.  
REMINDERS  
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH  
or less).  
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.  
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.  
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.  
Do not use products that have received any excessive mechanical shock such as by being dropped.  
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to  
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.  
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal  
design.  
Do not expose the products to magnets or magnetic fields.  
The performance of the product may deteriorate if coating materials are used, thus please assess the situation beforehand by taking  
this factor into consideration.  
Do not use for a purpose outside of the contents regulated in the delivery specifications.  
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications  
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement  
equipment, industrial robots) under a normal operation and use condition.  
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or  
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to  
society, person or property.  
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions  
set forth in the each catalog, please contact us.  
(1) Aerospace/Aviation equipment  
(2) Transportation equipment (electric trains, ships, etc.)  
(3) Medical equipment  
(8) Public information-processing equipment  
(9) Military equipment  
(10) Electric heating apparatus, burning equipment  
(11) Disaster prevention/crime prevention equipment  
(12) Safety equipment  
(4) Power-generation control equipment  
(5) Atomic energy-related equipment  
(6) Seabed equipment  
(13) Other applications that are not considered general-purpose  
applications  
(7) Transportation control equipment  
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing  
protection circuit/device or providing backup circuits in your equipment.  
20180130 / inductor_automotive_power_clf5030ni-d_en.
(3/10)  
I N D U C T O R S  
Product compatible with RoHS directive  
Halogen-free  
Inductors for power circuits  
Wound ferrite  
Compatible with lead-free solder  
AEC-Q200  
Overview of CLF5030NI-D type  
FEATURES  
Magnetic shield type wound inductor for power circuits.  
It can be used at a wide temperature range. –55 to +150°C（Including self-temperature rise)  
1 to 470µH, wide E-6 Series lineup allows for various usages.  
APPLICATION  
Automotive-related equipment (ECM, airbags, headlights, electronic power steering, meters, ABS, other)  
PART NUMBER CONSTRUCTION  
CLF5030NI  
T
-
1R0  
N
-
D
Inductance  
(µH)  
Inductance  
tolerance  
Series name  
Packaging style  
Internal code  
T
Taping  
1R0  
100  
101  
1.0  
10  
100  
M
N
20%  
30%  
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT  
Temperature range  
Package quantity  
Individual weight  
Operating Storage  
Type  
  
temperature  
temperature  
(pieces/reel)  
(g)  
0.24  
（°C）  
（°C）  
CLF5030NI-D  
–55 to +150  
–55 to +150  
2000  
  
Operating temperature range includes self-temperature rise.  
The Storage temperature range is for after the circuit board is mounted.  
  
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html  
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20180130 / inductor_automotive_power_clf5030ni-d_en.
(4/10)  
I N D U C T O R S  
CLF5030NI-D type  
RECOMMENDED REFLOW PROFILE  
Preheating  
Soldering  
Natural  
cooling  
Peak  
T4  
T3  
T3  
T2  
t3  
t2  
T1  
t1  
t: Time  
Preheating  
Temp.  
T1  
Soldering  
Temp.  
T3  
Peak  
Temp.  
T4  
Time  
t1  
60 to 120s  
Time  
t2  
10 to 30s  
Time  
t3  
5s  
T2  
180°C  
150°C  
230°C  
245°C  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20180130 / inductor_automotive_power_clf5030ni-d_en.
(5/10)  
I N D U C T O R S  
CLF5030NI-D type  
SHAPE & DIMENSIONS  
5.3 0.2  
(
)
2.1  
1.6 0.1  
1.6 0.1  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
2.0  
2.0  
2.0  
Dimensions in mm  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20180130 / inductor_automotive_power_clf5030ni-d_en.
(6/10)  
I N D U C T O R S  
CLF5030NI-D type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
L
Measuring  
frequency  
DC resistance Rated current*  
Isat  
Part No.  
Itemp  
(A)typ.  
3.70  
3.40  
3.10  
2.60  
2.10  
1.85  
1.70  
1.40  
1.20  
0.88  
0.68  
0.59  
0.40  
0.32  
0.28  
0.20  
0.17  
(µH)  
1.0  
Tolerance  
30%  
30%  
30%  
30%  
30%  
30%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
(kHz)  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
(Ω)  
(A)max.  
5.00  
3.69  
3.42  
2.70  
2.43  
2.07  
1.60  
1.30  
1.10  
0.94  
0.75  
0.68  
0.56  
0.44  
0.38  
0.29  
0.24  
(A)typ.  
6.00  
5.20  
4.53  
3.60  
3.18  
2.58  
2.15  
1.75  
1.42  
1.20  
1.00  
0.86  
0.68  
0.57  
0.46  
0.39  
0.31  
0.019  
0.023  
0.030  
0.040  
0.060  
0.075  
0.095  
0.140  
0.200  
0.310  
0.435  
0.530  
0.880  
1.290  
2.530  
3.400  
4.400  
CLF5030NIT-1R0N-D  
CLF5030NIT-1R5N-D  
CLF5030NIT-2R2N-D  
CLF5030NIT-3R3N-D  
CLF5030NIT-4R7N-D  
CLF5030NIT-6R8N-D  
CLF5030NIT-100M-D  
CLF5030NIT-150M-D  
CLF5030NIT-220M-D  
CLF5030NIT-330M-D  
CLF5030NIT-470M-D  
CLF5030NIT-680M-D  
CLF5030NIT-101M-D  
CLF5030NIT-151M-D  
CLF5030NIT-221M-D  
CLF5030NIT-331M-D  
CLF5030NIT-471M-D  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
15  
22  
33  
47  
68  
100  
150  
220  
330  
470  
 Rated current: smaller value of either Isat or Itemp.  
Isat: When based on the inductance change rate (30% below the nominal value)  
Itemp: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4285A  
AN-114N  
4285A+42841A+42842C  
Keysight Technologies  
ADEX  
Keysight Technologies  
DC resistance  
Rated current Isat  
＊ Equivalent measurement equipment may be used.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20180130 / inductor_automotive_power_clf5030ni-d_en.
(7/10)  
I N D U C T O R S  
CLF5030NI-D type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
10000  
1000  
471  
331  
221  
151  
100  
101  
680  
470  
330  
220  
150  
10  
100  
6R8  
4R7  
3R3  
2R2  
1R5  
1
1R0  
0.1  
10  
100  
1000  
10000  
100000  
(
)
Frequency kHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Keysight Technologies  
＊ Equivalent measurement equipment may be used.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20180130 / inductor_automotive_power_clf5030ni-d_en.
(8/10)  
I N D U C T O R S  
CLF5030NI-D type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
1000  
471  
331  
221  
151  
100  
101  
680  
470  
330  
220  
150  
10  
100  
6R8  
4R7  
3R3  
2R2  
1R5  
1
1R0  
0.1  
0
1
2
3
4
5
6
( )  
DC current A  
○ Measurement equipment  
Product No.  
4294A  
Manufacturer  
Keysight Technologies  
＊ Equivalent measurement equipment may be used.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20180130 / inductor_automotive_power_clf5030ni-d_en.
(9/10)  
I N D U C T O R S  
CLF5030NI-D type  
PACKAGING STYLE  
REEL DIMENSIONS  
2.0 0.5  
E
Type  
CLF5030NI-D  
A
ø330  
W1  
13.5  
W2  
17.5  
N
ø100  
E
2
* These values are typical values.  
(
)
1.0  
ø13.0 0.5  
ø21.0 0.8  
W1  
W2  
A
Dimensions in mm  
TAPE DIMENSIONS  
øD0  
P2  
P0  
P1  
K2  
t
Dimensions in mm  
A
Type  
A
B
øD0  
E
F
P0  
P1  
P2  
W
K2  
t
CLF5030NI-D  
5.7  
5.4  
1.5+0.1/-0 1.75 0.1 5.5 0.1 4.0 0.1 8.0 0.1 2.0 0.1 12.0 0.3 3.6  
0.4  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20180130 / inductor_automotive_power_clf5030ni-d_en.
(10/10)  
I N D U C T O R S  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20180130 / inductor_automotive_power_clf5030ni-d_en.

相关型号：

CLF5030NIT-331M-D

 FIXED IND 330UH 200MA 4.08 OHM
TDK

CLF5030NIT-3R3N-D

 FIXED IND 3.3UH 2.6A 52 MOHM
TDK

CLF5030NIT-470M-D

 FIXED IND 47UH 680MA 522 MOHM
TDK

CLF5030NIT-471M-D

 FIXED IND 470UH 170MA 5.28 OHM
TDK

CLF5030NIT-4R7N-D

 General Purpose Inductor,
TDK

CLF5030NIT-680M-D

 FIXED IND 68UH 590MA 636 MOHM
TDK

CLF5030NIT-6R8N-D

 FIXED IND 6.8UH 1.85A 97.5 MOHM
TDK

CLF6045NI-D

 Inductors for Power Circuits Wound Ferrite
TDK

CLF6045NIT-100M-D

 FIXED IND 10UH 2.6A 42 MOHM SMD
TDK

CLF6045NIT-101M-D

 FIXED IND 100UH 860MA 384 MOHM
TDK

CLF6045NIT-150M-D

 FIXED IND 15UH 2A 72 MOHM SMD
TDK

CLF6045NIT-151M-D

 FIXED IND 150UH 720MA 576 MOHM
TDK
©2020 ICPDF网 联系我们和版权申明