CS45SL2GA220JAGGKA [TDK]
High Voltage Ceramic Capacitors Automotive Grade, Safety Standard Approved;型号: | CS45SL2GA220JAGGKA |
厂家: | TDK ELECTRONICS |
描述: | High Voltage Ceramic Capacitors Automotive Grade, Safety Standard Approved |
文件: | 总9页 (文件大小:158K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
C A P A C I T O R S
February 2016
Disc Type Capacitors with Lead
High Voltage Ceramic Capacitors
Automotive Grade, Safety Standard Approved
CSseries
Type:
CS [SL, B, Z5U characteristics, Eac: X1:440V, Y2:300V]
(2/9)
C A P A C I T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in automotive electronic equipment under a normal operation and use
condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
Please refer to the guideline of notabilia for fixed ceramic capacitors issued by JEITA(Japan Electronics and Information Technology
Association, EIAJ RCR-2335).
When designing your equipment even for automotive-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20160219 / leaddisc_automotive_cs_en.
(3/9)
C A P A C I T O R S
Product compatible with RoHS directive
Halogen-free
Disc Type Capacitors with Lead
High Voltage Ceramic Capacitors, Automotive Grade, Safety Standard Approved
Overview of CS Series
FEATURES
AEC-Q200 compliant.
1,000 cycles guaranteed under heat shock testing at –55°C to +125°C.
It can be used as a Y capacitor for battery chargers used in automobiles (EV, PHEV).
Compliant with IEC and the safety standards of various countries.
Rated at a withstand voltage of AC.2600V.
These products shall conform to RoHS Directive due to lead(Pb) free of lead wire and internal solder material.
Compatible with halogen-free external resin coating.
APPLICATION
For use in Y capacitor for battery chargers or air-conditioners used in automobiles.
PART NUMBER CONSTRUCTION
CS 80
ZU
2GA
222
M
A
K
A
□
Series
Nominal
capacitance
Capacitance
tolerance
Grade
classification
Temperature
characteristics
Typeꢀ
name
Rated voltage
Lead type
Application
classification
Internal code
45
65
70
75
80
85
95
11
100 10pF
221 220pF
472 4,700pF
J
K
M
5%
10%
20%
G
Long lead
+350 to
–1000ppm/°C
X1:440V
2GA
For use in
A
Safety
K
SL
A Halogen-free
Y2:300V
automobiles
standard
N Short lead
B
10%
V
Taping
ZU
(Z5U)
+22, -56%
ꢀ Please refer to P-6~8 about the product dimensions.
OPERATING TEMPERATURE RANGE
ꢀ
Temperature range
Capacitance temperature
characteristics
ꢀꢀ
Operating temperature
Storage temperature
(°C)
(°C)
SL
B
Z5U
–25 to +125
–25 to +125
–25 to +125
–25 to +125
–25 to +125
–25 to +125
ꢀ
The maximum operating temperature of 125°C includes capacitor self-generated heat of up to 20°C.
The storage temperature range applies to after MLCC is mounted on board.
ꢀꢀꢁ
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.
(4/9)
C A P A C I T O R S
Overview of CS Series
PACKAGE QUANTITY
Package quantity
Type
Taping (pieces / box)
Bulk (pieces / bag)
1000
CS
1000
CERTIFIED STATUS OF VARIOUS COUNTRIES
Safety
standard
BSI
Temperature
characteristics
Insulation sub-class and
rated voltage
Approval report No.*
Taiwan
Standard No.
Xiamen
KM37103
BS EN60384-14
IEC 60384-14
IEC 60384-14
EN 60384-14
EN 60384-14
EN 60384-14
EN 60384-14
EN 60384-14
AS 3250
VDE
SEV
40017930
15.0120
1406932
P12215336
D-01153
FI 27399
V3692
SEMKO
NEMKO
DEMKO
FIMKO
IMQ
X1: AC.440V
Y2: AC.300V
SL, B, Z5U
SAA
CS6268
1785515
E37861
CSA
UL
CSA-E60384-14
UL60384-14
CQC
GB/T14472-1998
CQC12001082619
CQC10001052862
Sub-Class:X1
SU03047-12006
Sub-Class:Y2
SU03047-12008
SZ03001-12006
SZ03001-12008
KTL
K60384-14
* Certificate numbers shall be changed owing to the revisions of the related standards.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.
(5/9)
C A P A C I T O R S
Overview of CS Series
RECOMMENDED FLOW PROFILE
Soldering
Preheating
Natural
cooling
T2
T1
t1
t2
t3
t: Time
Preheating
Temp.
T1
Peak
Temp.
T2
Natural cooling
Time
t3
Time
t1
Time
t2
110°C min.
30 to 60s.
260°C
Within 10s.
Over 60s.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.
(6/9)
C A P A C I T O R S
CS45 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: SL (+350 to –1000ppm/°C)
Rated Voltage Edc: X1:440V, Y2:300V
Dimensions (mm)
Capacitance
(pF)
Capacitance
tolerance
F
F
Part No.ꢀ
D max.
T max.
d
(Applied to bulk) (Applied to taping)
CS45SL2GA100JA□KAꢀꢀ
CS45SL2GA150JA□KA
CS45SL2GA220JA□KA
CS45SL2GA330JA□KA
CS45SL2GA470JA□KA
CS45SL2GA680JA□KA
10
15
22
33
47
68
5%
5%
5%
5%
5%
5%
7.0
7.0
7.0
7.0
8.0
9.0
7.0
7.0
7.0
7.0
7.0
7.0
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
* The part numbers are TDK’s standard specification products.
ꢀꢀ The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-9 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
D
T
D
T
D
T
Vertical kink
F
d
F
d
F
d
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Item
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
Markings
CS
10
Specifications
CS series
10pF
5%
X1: AC.440V
Y2: AC.300V
Marking examples
CS10J
54
J
440~X1
300~Y2
5. TDK’s logogram
6. Date code
Production base code
2015.4ꢀ
54
7. Applications
—
For use in automobiles
(
)
Marking position is reference.
(Underscore below date of production)
ꢀ
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
ꢀ
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.
(7/9)
C A P A C I T O R S
CS65,70,75,85 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: B ( 10%)
Rated Voltage Edc: X1:440V, Y2:300V
Dimensions (mm)
Capacitance
(pF)
Capacitance
tolerance
F
F
Part No.ꢀ
D max.
T max.
d
(Applied to bulk) (Applied to taping)
CS65-B2GA101KA□KAꢀꢀ
CS65-B2GA151KA□KA
CS65-B2GA221KA□KA
CS70-B2GA331KA□KA
CS75-B2GA471KA□KA
CS85-B2GA681KA□KA
100
150
220
330
470
680
10%
10%
10%
10%
10%
10%
7.0
7.0
7.0
7.5
9.0
9.5
7.0
7.0
7.0
7.0
7.0
7.0
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
* The part numbers are TDK’s standard specification products.
ꢀꢀ The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-9 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
D
T
D
T
D
T
Vertical kink
F
d
F
d
F
d
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Item
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
Markings
CS
101
Specifications
CS series
100pF
10%
X1: AC.440V
Y2: AC.300V
Marking examples
CS101K
54
K
440~X1
300~Y2
5. TDK’s logogram
6. Date code
Production base code
2015.4ꢀ
54
7. Applications
—
For use in automobiles
(
)
Marking position is reference.
(Underscore below date of production)
ꢀ
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
ꢀ
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.
(8/9)
C A P A C I T O R S
CS65,75,80,95,11 Type
CAPACITANCE AND DIMENSIONS
Temperature Characteristics: Z5U (+22, -56%)
Rated Voltage Edc: X1:440V, Y2:300V
Dimensions (mm)
Capacitance
(pF)
Capacitance
tolerance
F
F
Part No.ꢀ
D max.
T max.
d
(Applied to bulk) (Applied to taping)
CS65ZU2GA102MA□KAꢀꢀ
CS75ZU2GA152MA□KA
CS80ZU2GA222MA□KA
CS95ZU2GA332MA□KA
CS11ZU2GA472MA□KA
1,000
1,500
2,200
3,300
4,700
20%
20%
20%
20%
20%
7.0
8.0
9.5
12.0
13.5
7.0
7.0
7.0
7.0
7.0
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 1.5
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
7.5 0.8
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
0.6 0.05
* The part numbers are TDK’s standard specification products.
ꢀꢀ The " □ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below.
• Please refer to P-9 about the taping dimemsions.
LIST OF STANDARD LEAD SHAPES
Dimemsions in mm
Symbol G
Bulk/Long lead
Symbol N
Bulk/Short lead
Symbol V
Taping
D
T
D
T
D
T
Vertical kink
F
d
F
d
F
d
• TDK’s standard product is vertical kink.
• TDK’s recommendation is short lead type with the symbol N for bulk products.
MARKINGS
Item
1. Series
2. Nominal capacitance
3. Capacitance tolerance
4. Rated voltage Eac
Markings
CS
102
Specifications
CS series
1000pF
20%
X1: AC.440V
Y2: AC.300V
Marking examples
CS102M
54
M
440~X1
300~Y2
5. TDK’s logogram
6. Date code
Production base code
2015.4ꢀ
54
7. Applications
—
For use in automobiles
(
)
Marking position is reference.
(Underscore below date of production)
ꢀ
Year and month of production: last digit of year + month denoted by 1, 2, 3, 4, 5, 6, 7, 8, 9, O (October), N (November), or D (December).
The expression has become simplified due to a revision in the standards.
ꢀ
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.
(9/9)
C A P A C I T O R S
CS Series
TAPING DIMEMSIONS
P
D
T
P2
Δh
Δh
S
P1
F
D0
ød
P0
Item
Symbol Dimensions(mm)
Remarks
Body diameter
Body thickness
D
Depends on the specification of each product.
T
Depends on the specification of each product.
Lead-wire diameter
Pitch of component
Feed hole pitch
ød
P
0.6 0.05
15.0 1.0
15.0 0.3
3.75 0.7
7.5 1.3
Including the slant of body
P0
P1
Excepting the tape splicing part
Feed hole center to lead
Feed hole center to component center P2
Lead-to lead distance
Component alignment
Tape width
F
7.5 0.8
Measuring point is bottom kink
ꢂh
W
0 2.0
Including the slanting body due to bending lead-wire
18.0+1.0, –0.5
10.0min.
9.0 0.5
Adhesive tape width
Hole position
W0
W1
W2
H0
H1
Adhesive tape position
Bottom of kink from tape center
Height of body from tape center
Lead-wire protrusion
Feed hole diameter
Total tape thickness
Length of snipped lead
Coating on lead
4.0max.
16.0+1.5, –0.5
46.0max.
1.0max.
4.0 0.2
Adhesive tape do not stick out the tape
D0
t
0.6 0.3
Including adhesive tape
L
11.0max.
4.0max.
4.0max.
2.0max.
C
A
S
Height of kink
Measuring point is bottom kink
Spring action
AMMO PACK INNER BOX SIZE
Dimensions in mm
340max.
• For more information about products with other capacitance or other data, please contact us.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.
相关型号:
©2020 ICPDF网 联系我们和版权申明