DBM20/E [TDK]
附件;DBM20 Series
https://product.tdk.com/en/power/dbm
www.emea.lambda.tdk.com/dbm
24V 20A Buffer (Hold-Up) DIN Rail Module
The DBM20 20A buffer module is ideal for providing short term hold-up or peak power for loads powered by a 24Vdc output AC-DC power supply. During normal
operation, energy is stored in the DBM20’s electrolytic capacitors. When the AC power is interrupted for a short period of time, the DBM20 continues to power the load,
allowing equipment to shutdown in a safe and controlled manner. The DBM20 can be set to fixed or variable buffer mode. In fixed mode it will provide power when the
input voltage drops to 22.4V, in variable mode when the input decreases by 1V. Multiple buffer modules can be paralleled for additional hold-up time. Product status can
be accessed remotely via a DC OK relay, or locally using the LED indicators. The output voltage can also be inhibited to avoid an unsafe discharge of the stored energy.
Features
Benefits
• Provides 250ms Additional Hold-Up Time at 448W
• Utilizes Electrolytic Capacitors to Store Energy
• Narrow 49mm Width
• Avoids Loss of Data During AC Power Interruptions
• No Batteries to Service or Maintain
• Increases Available Space on the DIN Rail
• Hold-Up Time Can Be Extended
• Parallel Capable
• Output Remote On/Off Function
• Avoids Unsafe Discharge of Stored Energy
Model Selector
Output Voltage
Fixed Mode (V) (1)
Output Voltage
Dynamic Mode (V) (1)
Vin-1
Maximum
Current (A)
20
Average Buffer
Power (W)
448
Model
DBM20
DBM20/E
Terminals
Screw
Spring Clamp
22.4
22.4
Vin-1
20
448
Related Products
Type
Part Number(s)
DRM40
Description
Redundancy module
20 to 40A DIN Rail Redundancy Module
15 to 100W AC-DC DIN rail power supplies
120 to 480W AC-DC DIN rail power supplies
120 to 960W AC-DC DIN rail power supplies
3A to 30A 250Vac 2 stage filters with pulse attenuation
6A to 30A 250Vac 2 stage filters
Low power DIN rail power supplies
Mid to high power DIN rail power supplies
Mid to high power premium DIN rail power supplies
DIN rail mount filters
DRB15, 30, 50, 100
DRB120, 240, 480
DRF120, 240, 480, 960
RSMN
DIN rail mount filters
RSEV
RSEV DIN rail mounting kit
DIN-RSEV
RSEV DIN rail mounting kit
Specifications
Model
DBM20
Input
Input Voltage range
Vdc
Fixed Mode: 23 - 30, VIN-1 Mode: 24 - 30
Input Voltage Maximum Limit
Input Current (Typical)
Charging Time (Typical)
Hold Up Time (Typical)
Conducted & Radiated EMI
Immunity
Vdc
35
A
s
Charging Mode: 0.8, Ready Mode: 0.2
40
ms
-
250
EN55032-B CISPR32-B
See immunity table
-
Safety Certifications and Markings
-
IEC/UL/CSA/EN62368-1, UL508, CE Mark and UKCA Mark
1
DBM20 Series
Immunity
Test
Standard
Test Level
Criteria
Notes
ESD
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
4
3
B
A
B
B
A
16kV air, 8kV contact
Radiated Susceptibility
Electrical Fast Transient Burst
Surge
-
1-3
1-2
3
Signal pin to FG Lvl 1
Common mode only Lvl 2, Signal pin to FG Lvl 1
-
Conducted Susceptibility
Specifications
Model
DBM20
Output
Buffer Voltage Tolerance (Load > 5%)
Switching Frequency (Typical)
Ripple & Noise
%
Fixed Mode: ±2, Dynamic Mode: +3 to -4
kHz
Buck Converter: 100, Boost Converter: 70
mV
<240
Minimum Load
-
%
V
-
No minimum load required
Overcurrent Protection
Input Overvoltage Protection
Overtemperature Protection
Remote On/Off
>105 of buffer current
35
No
-
Yes
DC OK Relay
-
Photo MOS relay closed when DC is okay. (30V 0.2A)
Photocoupled signals indicating fully charged and discharging modes
Charging (green) and discharging (red) LEDs
Possible, see installation manual
Status Signals
-
Indicators
-
Parallel Operation
Series Operation
-
-
Not possible
Environmental
Operating Temperature
Storage Temperature
Humidity (non condensing)
Cooling
°C
°C
%RH
-
-25 to +70
-25 to +85
Operating: 30 - 90, storage: 10 - 90
Convection
Altitude
m
5,000
Input and output to ground 500
Withstand Voltage (For 1 minute)
Isolation Resistance
Vibration (Non Operating)
Shock
Vac
MΩ
-
>100 at 25°C, 70%RH & 500VDC (input and output to ground)
10 - 55Hz (sweep for 1 min) 19.6m/s2 (constant X, Y, Z axis for 1 hour each)
< 196.1
m/s2
Other
Weight (Typ)
g
740
Size (WxHxD)
mm
49 x 123.6 x 115.4
Size (WxHxD)
Inches
1.93 x 4.87 x 4.54
Connectors
Screw terminal or spring type. See model selector
DIN Rail Type
-
Suitable for mounting on TS-35/7.5 or TS35/15 DIN Rails
MTBF - Telcordia TR-332 issue 5 (25°C)
Warranty
Hours
yrs
1,026,962
5
Notes
See website for detailed specifications, test methods and installation manual
(1) Fixed and VIN-1 mode is switch selectable on the front panel
2
DBM20 Series
Buffer Time Versus Buffer Current
3
DBM20 Series
Block Diagram
Timing Diagram
4
DBM20 Series
Outline Drawing DBM20
Outline Drawing DBM20/E
5
DBM20 Series
TDK-Lambda France SAS
TDK-Lambda Americas
Tel: +1 800-LAMBDA-4 or 1-800-526-2324
powersolutions@us.tdk-lambda.com
www.us.lambda.tdk.com
Tel: +33 1 60 12 71 65
france@fr.tdk-lambda.com
www.emea.lambda.tdk.com/fr
Italy Sales Office
Tel: +39 02 61 29 38 63
info.italia@it.tdk-lambda.com
www.emea.lambda.tdk.com/it
TDK Electronics do Brasil Ltda
Tel: +55 11 3289-9599
sales.br@tdk-electronics.tdk.com
www.tdk-electronics.tdk.com/en
Netherlands
info@nl.tdk-lambda.com
www.emea.lambda.tdk.com/nl
TDK-Lambda Germany GmbH
Tel: +49 7841 666 0
info@de.tdk-lambda.com
TDK-Lambda Corporation
Tel: +81-3-6778-1113
www.jp.lambda.tdk.com
www.emea.lambda.tdk.com/de
TDK-Lambda (China) Electronics Co. Ltd.
Tel: +86 21 6485-0777
powersolutions@cn.tdk-lambda.com
www.lambda.tdk.com.cn
TDK-Lambda Singapore Pte Ltd.
Tel: +65 6251 7211
tls.mkt@sg.tdk-lambda.com
www.sg.lambda.tdk.com
Austria Sales Office
Tel: +43 2256 655 84
info@at.tdk-lambda.com
www.emea.lambda.tdk.com/at
TDK India Private Limited, Power Supply Division
Switzerland Sales Office
Tel: +41 44 850 53 53
info@ch.tdk-lambda.com
www.emea.lambda.tdk.com/ch
Tel: +91 80 4039-0660
mathew.philip@in.tdk-lambda.com
www.sg.lambda.tdk.com
Nordic Sales Office
Tel: +45 8853 8086
info@dk.tdk-lambda.com
www.emea.lambda.tdk.com/dk
TDK-Lambda UK Ltd.
Tel: +44 (0) 12 71 85 66 66
info@uk.tdk-lambda.com
www.emea.lambda.tdk.com/uk
TDK-Lambda Ltd.
Tel: +9 723 902 4333
info@tdk-lambda.co.il
www.emea.lambda.tdk.com/il
C.I.S.
Commercial Support:
Tel: +7 (495) 665 2627
Technical Support:
Tel: +7 (812) 658 0463
info@tdk-lambda.ru
www.emea.lambda.tdk.com/ru
For Additional Information, please visit
https://product.tdk.com/en/power/
DBM20_260725 May 16th, 2022 V2
6
DBM20 Series
相关型号:
DBM21H1P-JNMBK52
Ensuring over 20 years of mission critical communication between two worlds across 250,000,000 milies
ITT
DBM21H1S-NNMB
Ensuring over 20 years of mission critical communication between two worlds across 250,000,000 milies
ITT
DBM21H1S-NNMBK52
Ensuring over 20 years of mission critical communication between two worlds across 250,000,000 milies
ITT
DBM21H1S-VNMBK52
Ensuring over 20 years of mission critical communication between two worlds across 250,000,000 milies
ITT
DBM21W1P-NMB-K52
D Subminiature Connector, 21 Contact(s), Male, Solder Terminal, Hole .112-.124, Receptacle
ITT
DBM21W1P043NLF
D Subminiature Connector, 20 Contact(s), Male, Solder Terminal, ROHS COMPLIANT
AMPHENOL
©2020 ICPDF网 联系我们和版权申明