DEA205462BT-2023 [TDK]
Band Pass Filter, 5462.5MHz, ROHS COMPLIANT PACKAGE-4;型号: | DEA205462BT-2023 |
厂家: | TDK ELECTRONICS |
描述: | Band Pass Filter, 5462.5MHz, ROHS COMPLIANT PACKAGE-4 LTE |
文件: | 总18页 (文件大小:306K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TDK Products for Wireless LAN
2/7/2002
for 5GHz (Wide Band)
Mutilayer Band Pass Filter
Start Freq. Stop Freq. Ins. Loss
Atenuation (Typ.)
Size
Part No.
MHz
5150
4900
5100
5150
4900
5100
MHz
5900
5950
5825
5875
5950
5825
dB (MAX) MHz
dB
42
32
32
38
48
50
MHz
4465
4465
4465
4465
4465
4465
dB
10
5
MHz
6855
6855
6855
6855
6855
6855
dB
12
8
9
5
mm (typ.)
1.5
1.5
1.9
2.0
2.0
2.2
3450
3450
3500
3450
3450
3450
2.0x1.2x1.0 DEA205437BT-1200
2.0x1.2x1.0 DEA205425BT-1209
2.0x1.2x1.0 DEA205462BT-2023
2.0x1.2x1.0 DEA205462BT-2025
2.0x1.2x1.0 DEA205425BT-2028B1
1.6x0.8x0.6 DEA165487BT-1202
9
30
14
10
13
5
Block Band Pass Filter
Start Freq. Stop Freq. Ins. Loss
Atenuation (Typ.)
Size
Part No.
MHz
5150
5150
5150
MHz
5850
5850
5825
dB (MAX) MHz
dB
32
35
26
MHz
4600
4600
4600
dB
17
29
10
MHz
7000
7000
7000
dB
22
26
28
mm (typ.)
3.0x3.0x1.8
4.3x3.0x2.0
3.2x3.1x1.8
1.0
2.0
1.2
3700
3700
3700
CF61A4401
CF61A4501
CF61A4901
for 5.8GHz
Block Band Pass Filter
Center Freq. Band Width Ins. Loss
Atenuation (Typ.)
Size
Part No.
MHz
5800
5800
MHz
150
150
dB (MAX) MHz
dB
20
22
MHz
5625
5625
dB
2
13
MHz
6175
6175
dB
8
17
mm (typ.)
4.2x2.0x2.0
3.0x4.3x2.0
2.0
3.4
5425
5425
S0354
S0356
Sample Available
Under developing
PRELIMINARY DATA
Oct. / 2002 Ver. 10
MULTILAYER BAND PASS FILTER
P/N: DEA205437BT-1200
For 5.0GHz W-LAN
MECHANICAL DIMENSIONS
0.9±0.1
2.0±0.15
GND
Mark
IN
0.3±0.15
OUT
GND
0.25±0.1
1.0±0.15
Note: Thesesamples are marked with a trial sample identification. This applies for these samples only.
In mass production, this sample marking will be changed to show in the TDK full specification.
ELECTRICAL CHARACTERISTICS ( at 25 °C )
No. PARAMETER
Frequency (MHz)
5525
Unit
-
MIN.
-
TYP.
MAX.
1
2
3
4
CENTER FREQUENCY
-
1.1
-
-
1.5
-
INSERTION LOSS
RETURN LOSS
ATTENUATION
5150 – 5900
5150 – 5900
3450
-
dB
dB
dB
10.0
35.0
-
-
TEMPERATURE RANGE
Storage Temperature
-40 ~ +85 °C
-40 ~ +85 °C
Operating Temperature
Note: This document is PRELIMINARY. All specifications are subject to change and are not guaranteed.
PRELIMINARY DATA
Oct. / 2002 Ver. 10
FREQUENCY CHARACTERISTICS
DEA205437BT-1200
0
S21
-10
-20
-30
-40
-50
-60
-70
5150 MHz
-1.06 dB
5900 MHz
-0.57 dB
3450 MHz
-47.72 dB
S11
S21
1000
3000
5000
7000
9000
11000
Freq. [MHz]
RECOMMENDED LAND PATTERN
1.400
1.400
0.300
0.700
1.000 2.200
Land
1.000
Solder resist
1.600
3.000
Through hole(center/0.3
Through hole(0.5mm)
No Pattern solder resis
*Line width be designed to match 50ohm characteristic impedance,
depending on PCB material and thickness.
Notes:All the technical data and information contained herein are
subject to change without prior notice.
Note: This document is PRELIMINARY. All specifications are subject to change and are not guaranteed.
PRELIMINARY DATA
Dec. / 2002 Ver. 1
MULTILAYER BAND PASS FILTER
P/N: DEA205425BT-1209B2 For 5.0GHz W-LAN
MECHANICAL DIMENSIONS
0.9±0.1
2.0±0.15
GND
Mark
IN
0.3±0.15
OUT
GND
0.25±0.1
1.0±0.15
Note: Thesesamples are marked with a trial sample identification. This applies for these samples only.
In mass production, this sample marking will be changed to show in the TDK full specification.
ELECTRICAL CHARACTERISTICS ( at 25 °C )
No. PARAMETER
Frequency (MHz)
Unit
MIN.
TYP.
MAX.
1
2
3
CENTER FREQUENCY
5425
-
-
-
1.1
-
-
1.5
-
-
INSERTION LOSS
RETURN LOSS
4900 – 5950
4900 – 5950
500 – 1900
dB
dB
dB
10.0
35
41
-
4
5
6
7
ATTENUATION
ATTENUATION
ATTENUATION
ATTENUATION
2140 – 3300
3450
30
25.0
17
38
34
25
-
-
-
dB
dB
dB
9800 – 11900
TEMPERATURE RANGE
Storage Temperature
-40 ~ +85 °C
-40 ~ +85 °C
Operating Temperature
Note: This document is PRELIMINARY. All specifications are subject to change and are notguaranteed.
PRELIMINARY DATA
Dec. / 2002 Ver. 1
FREQUENCY CHARACTERISTICS
S21
0
4.9 GHz
-1.17 dB
5.43 GHz
-0.69 dB
5.95 GHz
-0.78 dB
1.9 GHz
-42.74 dB
3.45 GHz
-34.91 dB
4.0 GHz
-17.29 dB
9.8 GHz
-27.41 dB
11.9 GHz
-29.51 dB
S11
S21
-10
-20
-30
-40
-50
-60
Insertion Loss
0
-0.5
-1
-1.5
-2
-2.5
-3
S11
S21
-3.5
-4
1.00 2.00 3.00 4.00
5.00 6.00 7.00 8.00 9.00 10.00 11.00 12.00
Freq.[GHz]
4.50 4.75 5.00 5.25 5.50 5.75 6.00 6.25 6.50
Freq.[GHz]
RECOMMENDED LAND PATTERN
1.400
1.400
0.300
0.700
1.000 2.200
Land
1.000
Solder resist
1.600
3.000
Through hole(center/0.3
Through hole(0.5mm)
No Pattern solder resis
*Line width be designed to match 50ohm characteristic impedance,
depending on PCB material and thickness.
Notes:All the technical data and information contained herein are
subject to change without prior notice.
Note: This document is PRELIMINARY. All specifications are subject to change and are notguaranteed.
PRELIMINARY DATA
Oct. / 2002 Ver. 2
MULTILAYER BAND PASS FILTER
P/N: DEA205462BT-2023
For 5.0GHz W-LAN
MECHANICAL DIMENSIONS
0.95±0.1
2.0±0.15
GND
Mark
IN
0.3±0.15
OUT
GND
0.25±0.1
1.0±0.15
Note: Thesesamples are marked with a trial sample identification. This applies for these samples only.
In mass production, this sample marking will be changed to show in the TDK full specification.
ELECTRICAL CHARACTERISTICS ( at 25 °C )
No. PARAMETER
Frequency (MHz)
Unit
MIN.
TYP.
MAX.
1
2
3
4
5
6
7
8
CENTER FREQUENCY
5462.5
5100 – 5825
5100 – 5825
1280 –1795
2140 – 3580
4375 – 4465
6855 – 7150
8570 – 8930
-
-
-
-
INSERTION LOSS
RETURN LOSS
ATTENUATION
ATTENUATION
ATTENUATION
ATTENUATION
ATTENUATION
-
1.5
13
40
35
13
14
37
1.9
dB
dB
dB
dB
dB
dB
dB
10
37
32
9
-
-
-
-
-
-
9
20
TEMPERATURE RANGE
Storage Temperature
Operating Temperature
-40 ~ +85 °C
-40 ~ +85 °C
Note: This document is PRELIMINARY. All specifications are subject to change and are not guaranteed.
PRELIMINARY DATA
Oct. / 2002 Ver. 2
FREQUENCY CHARACTERISTICS
S21
5100 MHz
-1.35 dB
5825 MHz
-0.96 dB
1795 MHz
-41.2 dB
3580 MHz
-35.3 dB
4465 MHz
-18.1 dB
0
-10
-20
-30
-40
-50
-60
6855 MHz
-13.2 dB
8930 MHz
-50.5 dB
S21 Zoom
0.0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
5000
5200
5400
5600
5800
6000
1000
3000
5000
7000
9000
Frequency[MHz]
Frequency[MHz]
RECOMMENDED LAND PATTERN
0.94
0.35
*
0.58
0.40
(mm)
1.10
1.70
Min.
Land
Solder resist
0.45
Through hole(0.3mm)
No Pattern solder resist
*Line width be designed to match 50ohm characteristic impedance,
depending on PCB material and thickness.
Notes:All the technical data and information contained herein are
subject to change without prior notice.
Note: This document is PRELIMINARY. All specifications are subject to change and are not guaranteed.
PRELIMINARY DATA
Oct. / 2002 Ver. 3
MULTILAYER BAND PASS FILTER
P/N: DEA205512BT-2025
For 5.0GHz W-LAN
MECHANICAL DIMENSIONS
0.95±0.1
2.0±0.15
GND
Mark
IN
0.3±0.15
OUT
GND
0.25±0.1
1.0±0.15
Note: Thesesamples are marked with a trial sample identification. This applies for these samples only.
In mass production, this sample marking will be changed to show in the TDK full specification.
ELECTRICAL CHARACTERISTICS ( at 25 °C )
No. PARAMETER
Frequency (MHz)
Unit
MIN.
TYP.
MAX.
1
2
3
4
5
6
7
8
CENTER FREQUENCY
5512.5
5150 – 5875
5150 – 5875
4000 – 4120
4280
-
-
1.5
1.25
40
-
-
INSERTION LOSS
VSWR
-
2.0
dB
-
-
2.0
ATTENUATION
ATTENUATION
ATTENUATION
ATTENUATION
ATTENUATION
25
35
15
10
10
-
-
-
-
-
dB
dB
dB
dB
dB
40
4580 – 4600
4660
20
15
10300 – 11750
20
TEMPERATURE RANGE
Storage Temperature
Operating Temperature
-40 ~ +85 °C
-40 ~ +85 °C
Note: This document is PRELIMINARY. All specifications are subject to change and are not guaranteed.
PRELIMINARY DATA
Oct. / 2002 Ver.3
FREQUENCY CHARACTERISTICS
DEA205512BT-2025
0
Insertion Loss
5150 [MHz]
-1.41 [dB]
5875 [MHz]
-0.68 [dB]
-10
-20
-30
-40
-50
-60
-70
Attenuation
4000 [MHz]
-57.40 [dB]
4120 [MHz]
-53.59 [dB]
4280 [MHz]
-49.63 [dB]
4580 [MHz]
-26.68 [dB]
4600 [MHz]
-25.19 [dB]
4660 [MHz]
-20.50 [dB]
11024 [MHz]
-21.70 [dB]
Return Loss
5150 [MHz]
-24.75 [dB]
5875 [MHz]
-20.04 [dB]
1000
2000
3000
4000
5000
6000
7000
8000
9000
Frequency[MHz]
RECOMMENDED LAND PATTERN
r=0.15mm THRUHOLE
0.6mm
0.7mm
Line width be designed to mach 50 ohm
characteristic impedance depending on PCB
Note: This document is PRELIMINARY. All specifications are subject to change and are not guaranteed.
PRELIMINARY DATA
Feb. / 2003 Ver.1
MULTILAYER BAND PASS FILTER
For5.0GHz W-LAN
P/N: DEA205425BT-2028B1
MECHANICAL DIMENSIONS
2.0 +/- 0.15
GND
0.95 +/- 0.1
[Top View]
IN
0.3 +/- 0.15
OUT
Mark
GND
Note: There is a DC path between the
In port, Out port and GND.
[Bottom View]
0.25 +/- 0.1
0.7 +/- 0.15
1.0 +/- 0.15
Note: These samples are marked with a trial sample identification.This applies for these samples only.
In mass production, this sample marking will be changed to show in the TDK full specification.
ELECTRICAL CHARACTERISTICS ( at 25 °C )
No. PARAMETER
Frequency (MHz)
5425
Unit
-
MIN.
-
TYP.
-
MAX.
-
1
CENTER FREQUENCY
2
3
INSERTION LOSS
RETURN LOSS
4900 – 5950
4900 – 5950
-
-
-
2.0
-
dB
dB
9
4
5
6
ATTENUATION
ATTENUATION
ATTENUATION
1280 –1795
1900
37
45
32
-
-
-
-
-
-
dB
dB
dB
2140 – 3580
7
8
9
ATTENUATION
ATTENUATION
ATTENUATION
4375 – 4465
6855 – 7150
8570 – 8930
9800 – 11900
8
-
-
-
-
-
-
-
-
dB
dB
dB
dB
9
20
25
10 ATTENUATION
TEMPERATURE RANGE
Storage Temperature
Operating Temperature
-40 ~ +85 °C
-40 ~ +85 °C
Note: This document is PRELIMINARY. All specifications are subject to change and are not guaranteed.
PRELIMINARY DATA
Feb. / 2003 Ver.1
FREQUENCYCHARACTERISTICS
S21
0
-10
-20
-30
-40
-50
-60
4.9 GHz
-1.47 dB
5.95 GHz
-1.19 dB
1795 GHz
-40.95 dB
1.9 GHz
-49.06 dB
3.58 GHz
-46.71 dB
4.465 GHz
-14.36 dB
6.855 GHz
-12.58 dB
8.93 GHz
-34.46 dB
11.9 GHz
-40.91 dB
S11
S21
1
2
3
4
5
6
7
8
9
10
11
12
Insertion Loss
0
-1
-2
-3
-4
-5
Freq.[GHz]
S11
S21
4.5 4.7 4.9 5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5
Freq.[GHz]
RECOMMENDED LAND PATTERN
0.95
0.45
*
0.67
0.40
(mm)
Land
0.70
2.80
Solder resist
1.10
1.50
0.60
Through hole(0.3mm)
No Pattern solder resist
*Line width be designed to match 50ohm characteristic impedance,
depending on PCB material and thickness.
Notes:All the technical data and information contained herein are
subject to change without prior notice.
Note: This document is PRELIMINARY. All specifications are subject to change and are not guaranteed.
PRELIMINARY DATA
Oct. / 2002 Ver. 10
MULTILAYER BAND PASS FILTER
P/N: DEA165487BT-1202
For 5.0GHz W-LAN
MECHANICAL DIMENSIONS
0.6±0.1
1.60±0.15
(2)
MARK
(1)
(3)
0.8±0.1
0.15 min.
(4)
(1) GND
(2) IN/OUT
(3) GND
(4) IN/OUT
0.2±0.1
0.2±0.1
0.5±0.1
0.2 min.
0.2 min.
Unit : mm
Note: Thesesamples are marked with a trial sample identification. This applies for these samples only.
In mass production, this sample marking will be changed to show in the TDK full specification.
ELECTRICAL CHARACTERISTICS ( at 25 °C )
No. PARAMETER
Frequency (MHz)
5525
Unit
-
MIN.
-
TYP.
MAX.
1
2
3
4
CENTER FREQUENCY
-
1.6
-
-
2.2
-
INSERTION LOSS
RETURN LOSS
ATTENUATION
5150 – 5900
5150 – 5900
3450
-
dB
dB
dB
10.0
35.0
-
-
TEMPERATURE RANGE
Storage Temperature
-40 ~ +85 °C
-40 ~ +85 °C
Operating Temperature
Note: This document is PRELIMINARY. All specifications are subject to change and are not guaranteed.
PRELIMINARY DATA
Oct. / 2002 Ver.10
FREQUENCY CHARACTERISTICS
DEA165487BT-1202
0
-10
-20
-30
S21
5150 MHz
-1.53 dB
5900 MHz
-1.37 dB
3450 MHz
-52.22 dB
-40
-50
-60
-70
2000
3000
4000
5000
6000
7000
8000
9000
10000
Frequency[MHz]
RECOMMENDED LAND PATTERN
r=0.15mm THRUHOLE
0.35m
Line width be designed to mach 50 ohm
characteristic impedance depending on PCB
Note: This document is PRELIMINARY. All specifications are subject to change and are not guaranteed.
TDK Compact Filter
Sample Part No.
CF61A4401
Feature
TENTATIVE
1. Compact and High performance 2pole filter
2. High reliability (Ceramic block filter)
3. SMD type
Frequency Characteristics
Electrical Characteristic
0
0
Sample Part No.
Center Frequency
S0355-4
5500
700
Typ
10
20
30
40
50
10
20
30
40
50
[MHz]
[MHz]
Band Width
Insertion Loss
VSWR
[dB]Max. 1.00
[dB]Min. 1.80
0.79
1.78
32.2
Attenuation 3700MHz [dB] Min.
30
3000
5000
7000
Frequency[MHz]
Dimensions
Tolerance unless otherwise specified ±0.20
Unit:mm
2002.03
TDK Compact Filter
R
Sample Part No.
CF61A4501
Feature
TENTATIVE
1. Compact and High performance 3pole filter
2. High reliability (Ceramic block filter)
3. SMD type
Frequency Characteristics
Electrical Characteristic
0
0
Sample Part No.
Center Frequency
Band Width
Insertion Loss
VSWR
S0399 Typ
5500
700
10
20
30
40
50
10
20
30
40
50
[MHz]
[MHz]
[dB]Max. 2.00
[dB]Min. 1.80
1.19
1.50
29.1
Attenuation
4600MHz
[dB] Min.
25
3000
5000
7000
Frequency[MHz]
Dimensions
Tolerance unless otherwise specified ±0.20
Unit:mm
2002.03
TDK Compact Filter
R
5.5GHz-W/LAN
Sample Part No.
CF61A4901
Feature
TENTATIVE
1. Compact and High performance 2pole filter
2. High reliability (Ceramic block filter)
3. SMD type
Electrical Characteristic
Dimensions
Sample Part No.
Center Frequency
Band Width
Insertion Loss
VSWR
CFC61A4901
5487.5
675
[MHz]
[MHz]
[dB]Max.
[dB]Min.
[dB] Min.
1.20
2.00
25
Attenuation
3500MHz
Tolerance unless otherwise specified ±0.30
Unit:mm
Frequency Characteristics
0
10
20
30
40
50
0
0
10
20
30
40
10
20
30
40
50
50
3000
5000
Frequency[MHz]
7000
500
3750
7000
Frequency[MHz]
10250
13500
Ver.2
2002.06
TDK Compact Filter
R
Part No.
S0354
Feature
1. Compact and High performance 2pole filter
2. High reliability (Ceramic block filter)
3. SMD type
TENTATIVE
Frequency Characteristics
Electrical Characteristic
0
10
20
30
40
50
0
Part No.
Center Frequency
S0354
[MHz]
[MHz]
5800
150
10
20
30
40
50
Band Width
Insertion Loss
Return Loss
Attenuation
[dB]Max.
[dB]Min.
[dB] Min.
[dB] Min.
2.00
9.54
15.0
5.0
5425MHz
6175MHz
5000
5500
6000
6500
Frequency[MHz]
Dimensions
Tolerance unless otherwise specified+/-0.20
Unit:mm
2001.04
TDK Compact Filter
R
Part No.
S0356
Feature
1. Compact and High performance 3pole filter
2. High reliability (Ceramic block filter)
3. SMD type
TENTATIVE
Frequency Characteristics
Electrical Characteristic
0
10
20
30
40
50
0
Part No.
Center Frequency
S0356
[MHz]
[MHz]
5800
150
10
20
30
40
50
Band Width
Insertion Loss
Return Loss
Attenuation
[dB]Max.
[dB]Min.
[dB] Min.
[dB] Min.
[dB] Min.
[dB] Min.
3.40
9.54
18.0
10.0
5.0
5425MHz
5625MHz
5975MHz
6175MHz
15.0
5000
5500
6000
6500
Frequency[MHz]
Dimensions
Tolerance unless otherwise specified+/-0.20
Unit:mm
2001.04
相关型号:
©2020 ICPDF网 联系我们和版权申明