DEM05-2R0P [TDK]
DC-DC Unregulated Power Supply Module, 3 Output, Hybrid, 25 X 33.30 MM, 11 MM HEIGHT, PACKAGE-13;型号: | DEM05-2R0P |
厂家: | TDK ELECTRONICS |
描述: | DC-DC Unregulated Power Supply Module, 3 Output, Hybrid, 25 X 33.30 MM, 11 MM HEIGHT, PACKAGE-13 |
文件: | 总2页 (文件大小:50K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
(1/2)
001-04 / 20030319 / ea33_de.
DE Series DEM Type
Power Supplies
DC to DC Converters
Non-insulation, High Power Type
SHAPES AND DIMENSIONS/RECOMMENDED PIN PATTERNS
A TYPE
33 0.5
33.3 1
Terminal
P.C.B
(33)
Tolerance: 0.1
B TYPE
33 0.5
33.3 1
Terminal
P.C.B
(33)
Tolerance: 0.1
Dimensions in mm
TERMINAL DESIGNATIONS AND FUNCTIONS[TOP VIEW]
COMMON SPECIFICATIONS
–10 to +70
A TYPE
B TYPE
Operating(°C) [Derating is necessary when ambient tem-
perature exceeds 40°C or 50°C.]
Temperature
range
IN
OUT
IN
OUT
9
8
7
6
5
13
12
11
10
9
8
7
Vout
NC
1
2
3
4
Vin
COM in
NC
1
Vout
NC
Storage(°C)
–20 to +70
Vin
2
3
COM out
COM in
NC
4
5
6
NC
NC
COM out
Vin
COM in
NC
DC input terminal(+)
DC input terminal(COM)
No connection
Connect to DC input line.
Connect to DC input line.
Do not connect.
Vout
DC output terminal(+)
Connect to load.
COM out
DC output terminal(COM) Connect to load.
• All specifications are subject to change without notice.
(2/2)
001-04 / 20030319 / ea33_de.
DE Series DEM Type
Power Supplies
DC to DC Converters
Non-insulation, High Power Type
SPECIFICATIONS AND STANDARDS
Part No.
Maximum output power
Input conditions
DEM05-1R0P
5
DEM05-2R0P
10
DEM12-1R0P
12
W
Input voltage Edc
Efficiency∗1
V
%
+21.6 to +26.4(+24typ.)
82typ.
+21.6 to +26.4(+24typ.)
83typ.
+21.6 to +26.4(+24typ.)
90typ.
Output characteristics
Output voltage Edc
Maximum output current
Output voltage setting deviation∗2
Output voltage total variation∗3
V
A
%
%
+5
1
3max.
2max.
150max.
(External capacitor 220µF×1)
300max.
(External capacitor 220µF×1)
+5
2
3max.
2max.
200max.
(External capacitor 560µF×2)
300max.
(External capacitor 560µF×2)
+12
1
3max.
2max.
200max.
(External capacitor 270µF×2)
300max.
(External capacitor 270µF×2)
Ripple Ep-p∗4
mV
mV
Ripple noise Ep-p∗4
Shapes and dimensions
Weight
A
8max.
B
B
g
10max.
10max.
∗1 Typical input voltage, maximum output current, ambient temperature 25°C.
∗2 Rated input and output, ambient temperature 25°C.
∗3 Output voltage total variation within the operating range is indicated by the derating chart and within the 0 to +50°C temperature range.
∗4 Measurement frequency: 50MHz.
• Dynamic load variation is 4% max., the value determined for 50 to 100% sudden load change over a time interval of 1ms max.
DERATINGS
PRECAUTIONS
Derating is necessary when ambient temperature exceeds 40°C or
50°C. Please refer to Table 1, DESIGN RECOMMENDATIONS.
• Series or parallel operation
Series or parallel operation of this product is not possible.
• Input fuse
TEMPERATURE DERATINGS
Recommended input fuse ratings are listed in the Table 1,
DESIGN RECOMMENDATIONS.
• Input capacitor
100
75
50
25
0
100
75
50
25
0
Region of
possible operation
Region of
possible operation
A capacitor should be connected between the DC input termi-
nals (+) and (COM in). The capacitor of 100 to 330µF is appro-
priate, while the range depends upon impedance. For this
purpose, it should be used with a 0.3V/ms or higher incline of an
input voltage rise. A long rise time may disable the start-up.
• External capacitor
Ripple and noise can be reduced by connecting an external
capacitor to the output. Capacitance should be below the value
listed in the table 1, DESIGN RECOMMENDATIONS.
• Overcurrent protection
Region of
operation
Region of
operation
–20
0
20
40
60
(
80
–20
0
20
40
60
(
80
)
Ambient temperature ˚C
)
Ambient temperature ˚C
Fig.2
Fig.1
TABLE 1
DESIGN RECOMMENDATIONS
Overcurrent protection is provided to protect the power supply
circuit from problems such as load short circuits, etc. It should
be noted, however, that 5 minutes or longer short circuit and a
use with overload are undesirable.
Derating
temperature
Fig.1
Fig.2
Fig.1
Input fuse
(A)
External capacitor
(µF)max.
1000
4700
4700
Part No.
DEM05-1R0P
DEM05-2R0P
DEM12-1R0P
1.6
2.5
2.5
SOLDERING CONDITIONS
Dipping: 260°C, 10s max.
CLEANING CONDITIONS
Cleaning should be limited to terminal portions.
• All specifications are subject to change without notice.
相关型号:
DEM09P
D Subminiature Connector, 9 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, Hole .112-.124, Receptacle,
AMPHENOL
©2020 ICPDF网 联系我们和版权申明