KPZ1608-HR [TDK]
Chip beads For power line Soft termination;
| 型号： | KPZ1608-HR |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Chip beads For power line Soft termination |
| 文件： | 总4页 (文件大小：187K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
E M C C o m p o n e n t s
Chip beads
Cl
Br
Pb
For power line
Soft termination
REACH Halogen
Free
Lead
Free
RoHS
SVHC-Free
KPZ-HR series (for automotive)
AEC-Q200
KPZ1608-HR type
FEATURES
Noise reduction solution for power line.
Compared to the KMZ series, has low direct current resistance for compatibility with large currents, optimal for low power consumption.
The conductive resin absorbs external stresses and improves resistance to mechanical stress and thermal shock.
The conductive resin provides thermal stress relief and can withstand temperatures as high as 150°C.
Operating temperature range: –55 to +150°C
Compliant with AEC-Q200
APPLICATION
Various ECUs, powertrains, body controls, and car multimedia (telematics).
PART NUMBER CONSTRUCTION
KPZ
1608
S
HR
121
A
T
DH5
L×W×T dimensions
1.6×0.8×0.6 mm
1.6×0.8×0.8 mm
Impedance
Material
name
Specifications
(Grade)
Characteristic
type
Internal
code
Series name
Packaging style
() at 100MHz
CHARACTERISTICS SPECIFICATION TABLE
Rated current
Impedance
DC resistance
Thickness T
Part No.
[100MHz]
()
30
120
220
Tolerance
10
25ꢀ
()max.
0.015
0.045
0.05
(A)max.
5.0
2.0
(mm)
0.6
0.6
KPZ1608SHR300ATDH5
KPZ1608SHR121ATDH5
KPZ1608SHR221ATD25
KPZ1608SHR601ATD25
KPZ1608SHR102ATD25
25ꢀ
2.2
0.8
600
1000
25ꢀ
25ꢀ
0.15
0.3
1
0.8
0.8
0.8
Please refer to the graph of rated current vs. temperature characteristics (derating) about the rating current at 85°C or more in temperature of the product.
Measurement equipment
Measurement item
Impedance
DC resistance
Product No.
E4991A+16192A
Type-7556
Manufacturer
Keysight Technologies
Yokogawa
＊ Equivalent measurement equipment may be used.
Rated current vs. temperature characteristics (derating)
6.0
5.0
SHR300A
4.0
3.0
SHR221A
2.0
SHR121A
SHR601A
1.0
SHR102A
0.0
–55
–25
5
35
65
95
125
150
(
)
Temperature °C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/4)
20200717
beads_automotive_power_kpz1608-hr_en.
E M C C o m p o n e n t s
KPZ1608-HR type
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
KPZ1608-SHR series
1200
KPZ1608SHR102A
1000
900
800
700
600
500
400
300
200
100
0
KPZ1608SHR221A
KPZ1608SHR601A
KPZ1608SHR121A
KPZ1608SHR300A
1
10
100
1000
)
10000
(
Frequency MHz
Z, X, R VS. FREQUENCY CHARACTERISTICS
KPZ1608SHR300ATDH5
KPZ1608SHR121ATDH5
KPZ1608SHR221ATD25
200
150
100
50
300
40
35
30
250
200
25
Z
Z
R
Z
R
150
20
15
10
5
R
100
50
0
X
X
X
0
0
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
KPZ1608SHR601ATD25
KPZ1608SHR102ATD25
1200
1000
800
800
700
600
500
400
300
200
100
0
Z
Z
R
R
600
400
200
X
X
(
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
Frequency MHz
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/4)
20200717
beads_automotive_power_kpz1608-hr_en.
E M C C o m p o n e n t s
KPZ1608-HR type
SHAPE & DIMENSIONS
PACKAGING STYLE
REEL DIMENSIONS
1.6 0.15
2.0 0.5
( )
Thickness T
1.0
0.6 0.15mm
0.8 0.15mm
+2.0
–0.0
8.4
ø13 0.2
ø21 0.8
0.3 0.2
14.4max.
Dimensions in mm
ø180 2.0
Dimensions in mm
TAPE DIMENSIONS
RECOMMENDED LAND PATTERN
Sprocket
hole
2.0 0.05
4.0 0.1
+0.1
1.5
–0
0.6
0.8
0.6
Dimensions in mm
A
4.0 0.1
K
Cavity
Dimensions in mm
Type
A
B
K
KPZ1608-HR
1.1 0.2
1.9 0.2
1.1max.
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
160min.
Taping
200min.
Peak
250 to 260°C
300min.
Drawing direction
230°C
230°C
Dimensions in mm
PACKAGE QUANTITY
180°C
Package quantity
4,000 pcs/reel
10s
150°C
60 to 120s
30 to 60s
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
Operating
temperature
range
Storage
Individual
weight
Type
temperature
range
Time
t=0.6mm (DH5)
t=0.8mm (D25)
The storage temperature range is for after the assembly.
–55 to +150 °C
–55 to +150 °C
–55 to +150 °C
–55 to +150 °C
3 mg
4 mg
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/4)
20200717
beads_automotive_power_kpz1608-hr_en.
E M C C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75ꢀ RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products described in this catalog are intended to be installed in automobiles or automotive electronic equipment (AV equipment,
telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equip-
ment, measurement equipment, industrial robots) and to be used in automobiles (including the case where the said automotive product
is mounted in a vehicle) or standard applications as general electronic equipment in automotive applications or standard applications
as general electronic equipment in automotive applications in accordance with the scope and conditions described in this specification,
while the said automotive or general electronic equipment including the said product is intended to be used in the usual operation and
usage methods, respectively. Other than automotive or automotive products are not designed or warranted to meet the requirements of
the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or whose failure,
malfunction or defect could cause serious damage to society, person or property.
Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications
below or for any other use exceeding the range or conditions set forth in this specification sheet.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in this specification, please contact us.
(1) Aerospace/aviation equipment
(8) Public information-processing equipment
(9) Military equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipmentꢀꢀ
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/4)
20200717
beads_automotive_power_kpz1608-hr_en.
相关型号：
©2020 ICPDF网 联系我们和版权申明