MHQ0603P0N6CT [TDK]
Inductors for High Frequency Circuits; 电感高频电路型号: | MHQ0603P0N6CT |
厂家: | TDK ELECTRONICS |
描述: | Inductors for High Frequency Circuits |
文件: | 总17页 (文件大小:158K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
I
N
D
U
C
T
O
R
S
September 2013
Inductors for High Frequency Circuits
Multilayer Ceramic
MHQ-Pseries
MHQ0603P
MHQ1005P
0603 [0201 inch]*
1005 [0402 inch]
* Dimensions Code JIS[EIA]
(2/17)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(3/17)
I
N
D
U
C
T
O
R
S
Product compatible with RoHS directive
Halogen-free
Inductors for High Frequency Circuits
Multilayer Ceramic
Compatible with lead-free solders
AEC-Q200
Overview of the MHQ-P Series
FEATURES
Unique ceramic material and configuration allows for the realization of high Q characteristics that are equivalent to that of air core wound
inductors.
Multilayer method allows for a lineup with fine increments of inductance.
APPLICATION
Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners, automotive equipment
and other high frequency circuits for the mobile communication industry
PART NUMBER CONSTRUCTION
MHQ
0603
P
0N6
S
T
□□□
L×W×H Dimensions
(mm)
Inductance
(nH)
Inductance
tolerance
Series name
Characteristics
Packaging style
Internal code
0603 0.65×0.35×0.35
P
0N6
1N1
11N
0.6
1.1
11
B
0.1nH
0.2nH
0.3nH
2%
3%
5%
T
Taping
1005
1.0×0.5×0.5
C
S
G
H
J
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight
Operating
temperature
Storage
temperature
Type
ꢀ
(pieces/reel)
15000
(°C)
(°C)
(mg)
MHQ0603P
MHQ1005P
–55 to +125
–55 to +125
–55 to +125
–55 to +125
1
1
10000
ꢀꢁꢁ
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(4/17)
I
N
D
U
C
T
O
R
S
Overview of the MHQ-P Series
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
30 to 60s
Time
t3
10s max.
T2
180°C
150°C
230°C
250 to 260°C
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(5/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseries
MHQ0603P Type
SHAPE & DIMENSIONS
0.09 0.04
0.09 0.04
0.65 0.05
Dimensions in mm
0.15 0.05
0.15 0.05
RECOMMENDED LAND PATTERN
0.25
0.30
0.25
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(6/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseriesꢀ
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Self-resonant
frequency
(GHz)
DC resistance
(ꢂ)
L measuring
frequency
(MHz)
Q measuring
frequency
(MHz)
Rated current
(mA)
max.
L
Q
min.
Part No.*
(nH)
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.7
5.1
5.6
6.2
Tolerance
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
min.
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
8.0
typ.
20.0
20.0
20.0
18.8
19.3
19.3
20.0
20.0
18.6
19.5
17.5
16.7
15.8
16.1
13.8
12.7
13.2
12.5
11.7
11.1
11.1
10.5
10.6
10.8
10.3
10.5
9.5
max.
0.07
0.07
0.07
0.07
0.07
0.07
0.08
0.10
0.10
0.10
0.10
0.10
0.12
0.12
0.12
0.15
0.15
0.15
0.15
0.25
0.25
0.25
0.25
0.30
0.30
0.30
0.20
0.25
0.25
0.25
0.25
0.25
0.30
0.35
0.35
0.35
0.35
0.35
0.40
0.40
0.40
0.70
typ.
0.02
0.02
0.02
0.02
0.03
0.03
0.04
0.06
0.06
0.05
0.06
0.07
0.07
0.08
0.08
0.08
0.09
0.08
0.08
0.17
0.16
0.16
0.18
0.19
0.19
0.19
0.13
0.15
0.14
0.17
0.16
0.17
0.19
0.23
0.26
0.22
0.23
0.23
0.25
0.24
0.29
0.52
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
1000
1000
1000
1000
1000
1000
1000
800
800
800
800
800
700
700
700
700
700
700
700
500
500
500
500
450
450
450
550
500
500
500
500
450
450
400
400
400
400
400
350
350
350
300
-
-
-
-
-
-
-
-
-
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
MHQ0603P0N6△T□□□
MHQ0603P0N7△T□□□
MHQ0603P0N8△T□□□
MHQ0603P0N9△T□□□
MHQ0603P1N0△T□□□
MHQ0603P1N1△T□□□
MHQ0603P1N2△T□□□
MHQ0603P1N3△T□□□
MHQ0603P1N4△T□□□
MHQ0603P1N5△T□□□
MHQ0603P1N6△T□□□
MHQ0603P1N7△T□□□
MHQ0603P1N8△T□□□
MHQ0603P1N9△T□□□
MHQ0603P2N0△T□□□
MHQ0603P2N1△T□□□
MHQ0603P2N2△T□□□
MHQ0603P2N3△T□□□
MHQ0603P2N4△T□□□
MHQ0603P2N5△T□□□
MHQ0603P2N6△T□□□
MHQ0603P2N7△T□□□
MHQ0603P2N8△T□□□
MHQ0603P2N9△T□□□
MHQ0603P3N0△T□□□
MHQ0603P3N1△T□□□
MHQ0603P3N2△T□□□
MHQ0603P3N3△T□□□
MHQ0603P3N4△T□□□
MHQ0603P3N5△T□□□
MHQ0603P3N6△T□□□
MHQ0603P3N7△T□□□
MHQ0603P3N8△T□□□
MHQ0603P3N9△T□□□
MHQ0603P4N0△T□□□
MHQ0603P4N1△T□□□
MHQ0603P4N2△T□□□
MHQ0603P4N3△T□□□
MHQ0603P4N7△T□□□
MHQ0603P5N1△T□□□
MHQ0603P5N6△T□□□
MHQ0603P6N2△T□□□
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.1, 0.2, 0.3nH 500
0.2, 0.3nH, 3% 500
0.2, 0.3nH, 3% 500
0.2, 0.3nH, 3% 500
0.2, 0.3nH, 3% 500
8.0
8.0
8.0
8.0
8.0
8.0
8.0
7.0
7.0
9.6
6.5
9.3
6.5
9.5
6.5
9.1
6.5
9.1
6.5
9.1
6.5
9.2
6.0
8.5
6.0
8.3
6.0
8.2
6.0
8.2
5.5
7.9
5.5
7.8
5.0
7.1
0.3nH, 3%
500
4.0
6.7
ꢀꢁ The " △ " of the Part Number contains the inductance tolerance code, B( 0.1nH), C( 0.2nH), S( 0.3nH), G( 2%), H( 3%)or J( 5%).
ꢀꢁ The " □□□ " of the Part Number contains the internal code.
・ Short bar residual inductance =0.556nH
○ Measurement equipment
Measurement item
Product No.
4991A+16197A
8720C
Manufacturer
L, Q
Agilent Technologies
Agilent Technologies
Yokogawa
Self-resonant frequency
DC resistance
Type-7561
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(7/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseriesꢀ
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Self-resonant
frequency
(GHz)
DC resistance
(ꢂ)
L measuring
frequency
(MHz)
Q measuring
frequency
(MHz)
Rated current
(mA)
max.
L
Q
min.
Part No.*
(nH)
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
Tolerance
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
min.
4.0
3.8
3.8
3.8
3.5
3.2
3.2
3.2
2.8
2.5
2.4
2.4
2.2
2.1
2.0
1.9
1.8
1.7
1.6
typ.
6.8
5.7
5.4
5.5
5.2
4.6
4.6
4.5
4.2
4.0
3.7
3.5
3.3
3.1
2.9
2.7
2.5
2.4
2.3
max.
0.70
0.50
0.90
0.90
1.20
1.30
1.40
1.50
1.50
1.70
1.70
2.00
2.00
2.20
2.20
2.70
2.80
2.80
3.00
typ.
0.53
0.37
0.64
0.62
0.86
0.89
0.77
1.01
1.05
1.21
1.21
1.38
1.40
1.55
1.55
1.98
2.06
2.08
2.24
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
300
300
300
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
14
14
14
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
300
300
300
300
300
250
250
240
240
240
180
180
180
180
160
160
160
160
160
160
160
160
MHQ0603P6N8△T□□□
MHQ0603P7N5△T□□□
MHQ0603P8N2△T□□□
MHQ0603P9N1△T□□□
MHQ0603P10N△T□□□
MHQ0603P11N△T□□□
MHQ0603P12N△T□□□
MHQ0603P13N△T□□□
MHQ0603P15N△T□□□
MHQ0603P16N△T□□□
MHQ0603P18N△T□□□
MHQ0603P20N△T□□□
MHQ0603P22N△T□□□
MHQ0603P24N△T□□□
MHQ0603P27N△T□□□
MHQ0603P30N△T□□□
MHQ0603P33N△T□□□
MHQ0603P36N△T□□□
MHQ0603P39N△T□□□
ꢀꢁ The " △ " of the Part Number contains the inductance tolerance code, B( 0.1nH), C( 0.2nH), S( 0.3nH), G( 2%), H( 3%)or J( 5%).
ꢀꢁ The " □□□ " of the Part Number contains the internal code.
・ Short bar residual inductance =0.556nH
○ Measurement equipment
Measurement item
Product No.
4991A+16197A
8720C
Manufacturer
L, Q
Agilent Technologies
Agilent Technologies
Yokogawa
Self-resonant frequency
DC resistance
Type-7561
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(8/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseriesꢀ
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
Q typ.
500MHz
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29
28
30
29
28
27
29
28
31
31
25
26
26
26
24
23
24
27
25
27
25
26
26
24
23
Part No.*
500MHz
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.7
5.1
5.6
6.2
800MHz
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.7
5.1
5.6
6.2
1.8GHz
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.9
5.3
5.9
6.6
2.0GHz
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.1
4.2
4.3
4.4
4.5
4.9
5.4
6.0
6.7
2.4GHz
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.2
4.3
4.4
4.5
4.6
5.1
5.5
6.2
7.0
800MHz
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38
37
39
38
38
35
37
37
40
41
32
34
34
35
31
30
32
35
32
35
33
33
34
32
30
1.8GHz
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58
56
62
59
57
55
58
57
61
62
51
54
54
54
48
46
49
53
48
53
50
50
51
49
47
2.0GHz
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60
60
65
62
60
58
62
61
64
64
53
56
57
55
51
48
51
55
50
55
52
52
52
51
49
2.4GHz
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66
66
71
69
66
64
68
68
71
71
59
62
63
62
56
52
57
61
54
61
57
57
58
56
54
MHQ0603P0N6△T□□□
MHQ0603P0N7△T□□□
MHQ0603P0N8△T□□□
MHQ0603P0N9△T□□□
MHQ0603P1N0△T□□□
MHQ0603P1N1△T□□□
MHQ0603P1N2△T□□□
MHQ0603P1N3△T□□□
MHQ0603P1N4△T□□□
MHQ0603P1N5△T□□□
MHQ0603P1N6△T□□□
MHQ0603P1N7△T□□□
MHQ0603P1N8△T□□□
MHQ0603P1N9△T□□□
MHQ0603P2N0△T□□□
MHQ0603P2N1△T□□□
MHQ0603P2N2△T□□□
MHQ0603P2N3△T□□□
MHQ0603P2N4△T□□□
MHQ0603P2N5△T□□□
MHQ0603P2N6△T□□□
MHQ0603P2N7△T□□□
MHQ0603P2N8△T□□□
MHQ0603P2N9△T□□□
MHQ0603P3N0△T□□□
MHQ0603P3N1△T□□□
MHQ0603P3N2△T□□□
MHQ0603P3N3△T□□□
MHQ0603P3N4△T□□□
MHQ0603P3N5△T□□□
MHQ0603P3N6△T□□□
MHQ0603P3N7△T□□□
MHQ0603P3N8△T□□□
MHQ0603P3N9△T□□□
MHQ0603P4N0△T□□□
MHQ0603P4N1△T□□□
MHQ0603P4N2△T□□□
MHQ0603P4N3△T□□□
MHQ0603P4N7△T□□□
MHQ0603P5N1△T□□□
MHQ0603P5N6△T□□□
MHQ0603P6N2△T□□□
26
23
24
25
24
25
24
21
34
30
31
33
31
32
31
28
52
46
46
49
47
49
46
42
53
48
48
51
49
51
48
43
59
52
52
56
54
56
52
47
ꢀꢁ The " △ " of the Part Number contains the inductance tolerance code, B( 0.1nH), C( 0.2nH), S( 0.3nH), G( 2%), H( 3%)or J( 5%).
ꢀꢁ The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Product No.
Manufacturer
4291B+16193A
Agilent Technologies
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(9/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseriesꢀ
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
Q typ.
500MHz
22
24
21
23
22
21
23
21
23
22
23
22
23
22
23
Part No.*
500MHz
6.8
7.5
8.2
9.1
10
800MHz
6.8
7.5
8.2
9.2
10
1.8GHz
7.2
8.1
8.9
9.9
11
2.0GHz
7.4
8.3
9.2
10.2
11
2.4GHz
7.7
8.8
9.7
10.9
12
800MHz
28
30
27
29
28
27
29
27
29
28
28
27
29
26
28
27
1.8GHz
43
44
39
42
41
37
41
36
37
37
36
33
34
29
30
2.0GHz
44
45
40
44
42
38
41
36
37
37
35
32
33
27
28
2.4GHz
48
48
42
46
43
39
41
36
36
35
33
27
MHQ0603P6N8△T□□□
MHQ0603P7N5△T□□□
MHQ0603P8N2△T□□□
MHQ0603P9N1△T□□□
MHQ0603P10N△T□□□
MHQ0603P11N△T□□□
MHQ0603P12N△T□□□
MHQ0603P13N△T□□□
MHQ0603P15N△T□□□
MHQ0603P16N△T□□□
MHQ0603P18N△T□□□
MHQ0603P20N△T□□□
MHQ0603P22N△T□□□
MHQ0603P24N△T□□□
MHQ0603P27N△T□□□
MHQ0603P30N△T□□□
MHQ0603P33N△T□□□
MHQ0603P36N△T□□□
MHQ0603P39N△T□□□
11
11
12
13
14
12
12
14
14
16
13
13
15
16
18
15
15
18
19
21
16
16
19
20
23
18
18
22
24
28
20
21
26
28
34
22
23
29
32
40
28
24
25
34
38
27
28
38
44
30
32
47
22
22
22
23
33
35
55
27
26
26
36
38
67
39
42
79
ꢀꢁ The " △ " of the Part Number contains the inductance tolerance code, B( 0.1nH), C( 0.2nH), S( 0.3nH), G( 2%), H( 3%)or J( 5%).
ꢀꢁ The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Product No.
Manufacturer
4291B+16193A
Agilent Technologies
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(10/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseriesꢀ
MHQ0603PType
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
100
39N
27N
22N
33N
18N
15N
12N
10N
8N2
10
6N8
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1N0
1
0
1
10
100
1000
10000
(
)
Frequency MHz
○ Measurement equipment
Product No.
Manufacturer
E4991+16193A
Agilent Technologies
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(11/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseriesꢀ
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
100
1N0
1N2
90
80
70
60
50
40
30
20
10
0
1N8
1N5
2N2
2N7
4N7
3N9
3N3
5N6
6N8
8N2
10N
12N
15N
18N
22N
27N
33N
39N
1
10
100
1000
10000
(
)
Frequency MHz
○ Measurement equipment
Product No.
Manufacturer
E4991+16193A
Agilent Technologies
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(12/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseries
MHQ1005P Type
SHAPE & DIMENSIONS
0.12 0.05
0.12 0.05
1.00 0.05
Dimensions in mm
0.22 0.08
0.22 0.08
RECOMMENDED LAND PATTERN
0.35
0.50
0.35
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(13/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseriesꢀ
MHQ1005P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Self-resonant
frequency
(GHz)
DC resistance
(ꢂ)
L measuring
frequency
(MHz)
Q measuring
frequency
(MHz)
Rated current
(mA)
max.
L
Q
min.
Part No.*
(nH)
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
Tolerance
min.
15.0
14.0
13.0
12.0
11.0
10.0
9.0
typ.
20.0
20.0
18.3
20.0
19.7
15.2
15.1
11.5
12.1
9.8
max.
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.05
0.06
0.06
0.07
0.08
0.08
0.09
0.09
0.10
0.11
0.12
0.13
0.13
0.14
0.16
0.16
0.17
0.19
0.24
0.28
typ.
0.01
0.02
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.04
0.04
0.06
0.06
0.07
0.07
0.08
0.08
0.09
0.10
0.09
0.10
0.12
0.12
0.13
0.15
0.19
0.22
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
0.1, 0.2, 0.3nH 100
—
—
—
—
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
1200
1200
1200
1200
1000
1000
1000
1000
1000
1000
900
900
900
900
900
800
800
800
800
700
700
600
550
550
500
450
400
MHQ1005P1N0△T□□□
MHQ1005P1N1△T□□□
MHQ1005P1N2△T□□□
MHQ1005P1N3△T□□□
MHQ1005P1N5△T□□□
MHQ1005P1N6△T□□□
MHQ1005P1N8△T□□□
MHQ1005P2N0△T□□□
MHQ1005P2N2△T□□□
MHQ1005P2N4△T□□□
MHQ1005P2N7△T□□□
MHQ1005P3N0△T□□□
MHQ1005P3N3△T□□□
MHQ1005P3N6△T□□□
MHQ1005P3N9△T□□□
MHQ1005P4N3△T□□□
MHQ1005P4N7△T□□□
MHQ1005P5N1△T□□□
MHQ1005P5N6△T□□□
MHQ1005P6N2△T□□□
MHQ1005P6N8△T□□□
MHQ1005P7N5△T□□□
MHQ1005P8N2△T□□□
MHQ1005P9N1△T□□□
MHQ1005P10N△T□□□
MHQ1005P12N△T□□□
MHQ1005P15N△T□□□
8.0
8.0
6.5
6.5
9.6
6.0
9.4
6.0
9.0
5.5
8.4
5.0
7.7
5.0
7.1
5.0
7.7
4.5
7.2
4.5
6.5
4.0
5.9
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
2%, 3%, 5%
100
100
100
100
100
100
100
4.0
5.8
4.0
5.6
3.6
4.9
3.4
4.5
3.3
4.6
12
15
2.8
3.8
2.3
3.2
ꢀꢁ The " △ " of the Part Number contains the inductance tolerance code, B( 0.1nH), C( 0.2nH), S( 0.3nH), G( 2%), H( 3%)or J( 5%).
ꢀꢁ The " □□□ " of the Part Number contains the internal code.
・ Short bar residual inductance =0.556nH
○ Measurement equipment
Measurement item
Product No.
4291B+16193A
8720C
Manufacturer
L, Q
Agilent Technologies
Agilent Technologies
Yokogawa
Self-resonant frequency
DC resistance
Type-7561
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(14/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseriesꢀ
MHQ1005P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
Q typ.
500MHz
56min.
56min.
56min.
56min.
56
60
52
54
47
45
45
47
41
41
40
41
38
41
39
45
42
38
42
38
39
Part No.*
500MHz
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.3
2.6
2.9
3.2
3.5
3.8
4.2
4.6
5.0
5.5
6.1
6.7
7.3
8.0
8.9
9.8
12
800MHz
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.1
2.3
2.6
2.9
3.2
3.5
3.8
4.2
4.6
5.0
5.5
6.1
6.7
7.3
8.1
9.0
9.9
12
1.8GHz
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.4
4.7
5.2
5.7
6.5
7.2
7.9
8.9
9.9
11.1
14
2.0GHz
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
4.0
4.5
4.8
5.3
5.8
6.7
7.4
8.1
9.2
10.3
11.6
14
2.4GHz
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.1
3.4
3.7
4.1
4.6
4.9
5.4
6.1
7.0
7.8
8.5
9.8
11.2
12.6
16
800MHz
76min.
76min.
76min.
76min.
76
78
72
70
62
59
57
59
55
53
53
54
50
52
51
56
53
49
53
49
51
1.8GHz
126min.
126min.
126min.
126min.
126
136
123
108
104
98
87
92
91
87
87
86
82
79
81
84
77
76
77
73
74
67
2.0GHz
130min.
130min.
130min.
130min.
130
144
129
113
110
102
91
97
95
91
91
89
85
83
84
2.4GHz
160min.
160min.
160min.
160min.
160
174
152
132
129
120
108
116
112
107
105
102
98
97
95
99
91
87
88
79
77
MHQ1005P1N0△T□□□
MHQ1005P1N1△T□□□
MHQ1005P1N2△T□□□
MHQ1005P1N3△T□□□
MHQ1005P1N5△T□□□
MHQ1005P1N6△T□□□
MHQ1005P1N8△T□□□
MHQ1005P2N0△T□□□
MHQ1005P2N2△T□□□
MHQ1005P2N4△T□□□
MHQ1005P2N7△T□□□
MHQ1005P3N0△T□□□
MHQ1005P3N3△T□□□
MHQ1005P3N6△T□□□
MHQ1005P3N9△T□□□
MHQ1005P4N3△T□□□
MHQ1005P4N7△T□□□
MHQ1005P5N1△T□□□
MHQ1005P5N6△T□□□
MHQ1005P6N2△T□□□
MHQ1005P6N8△T□□□
MHQ1005P7N5△T□□□
MHQ1005P8N2△T□□□
MHQ1005P9N1△T□□□
MHQ1005P10N△T□□□
MHQ1005P12N△T□□□
MHQ1005P15N△T□□□
87
80
79
80
75
75
68
57
39
37
49
45
70
54
15
15
18
20
23
57
ꢀꢁ The " △ " of the Part Number contains the inductance tolerance code, B( 0.1nH), C( 0.2nH), S( 0.3nH), G( 2%), H( 3%)or J( 5%).
ꢀꢁ The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Product No.
Manufacturer
4291B+16193A
Agilent Technologies
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(15/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseriesꢀ
MHQ1005PType
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
1000
100
10
1
15N
12N
10N
8N2
6N8
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1N0
0
10
100
1000
10000
(
)
Frequency MHz
○ Measurement equipment
Product No.
E4991+16193A
Manufacturer
Agilent Technologies
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(16/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseriesꢀ
MHQ1005P Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
200
1N5
1N8
1N2
1N0
180
160
140
120
100
80
2N2
2N7
3N3
3N9
4N7
5N6
6N8
8N2
10N
12N
60
40
15N
20
0
10
100
1000
10000
(
)
Frequency MHz
○ Measurement equipment
Product No.
E4991+16193A
Manufacturer
Agilent Technologies
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
(17/17)
I
N
D
U
C
T
O
R
S
MHQ-Pseries
Packaging Style
REEL DIMENSIONS
1.0
+2.0
2.0 0.5
ø13 0.2
ø21 0.8
8.4
–0.0
14.4max.
ø180 2.0
Dimensions in mm
TAPE DIMENSIONS
Type
A
B
K
MHQ0603P
MHQ1005P
0.74 0.05 0.44 0.05 0.60 max.
1.15 0.10 0.75 0.10 0.8 max.
+0.1
1.5
Sprocket hole
Cavity
–0.0
K
B
4.0 0.1
2.0 0.05
2.0 0.05
200min.
160min.
Taping
300min.
Drawing direction
• All specifications are subject to change without notice.
001-01 / 20130929 / inductor_high-frequency_mhq_en.
相关型号:
©2020 ICPDF网 联系我们和版权申明