首页 |元器件品牌

MLF2012A4R7KTD25 [TDK]

General Purpose Inductor,;
MLF2012A4R7KTD25
型号： MLF2012A4R7KTD25
厂家： TDK ELECTRONICS    TDK ELECTRONICS
描述：

General Purpose Inductor,

测试 电感器
文件： 总23页 (文件大小：278K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
I
N
D
U
C
T
O
R
S
February 2014  
Inductors for Standard Circuits  
Multilayer Ferrite  
MLFseries(For automobiles)  
MLF1005  
MLF1608  
MLF2012  
1005 [0402 inch]*  
1608 [0603 inch]  
2012 [0805 inch]  
* Dimensions Code JIS[EIA]  
(2/23)  
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS  
Before using these products, be sure to request the delivery specifications.  
SAFETY REMINDERS  
Please pay sufficient attention to the warnings for safe designing when using these products.  
REMINDERS  
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH  
or less).  
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.  
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).  
Before soldering, be sure to preheat components.  
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature  
does not exceed 150°C.  
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.  
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.  
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to  
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.  
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal  
design.  
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.  
A malfunction may occur due to magnetic interference.  
Use a wrist band to discharge static electricity in your body through the grounding wire.  
Do not expose the products to magnets or magnetic fields.  
Do not use for a purpose outside of the contents regulated in the delivery specifications.  
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications  
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement  
equipment, industrial robots) under a normal operation and use condition.  
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or  
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to  
society, person or property.  
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions  
set forth in the each catalog, please contact us.  
(1) Aerospace/Aviation equipment  
(2) Transportation equipment (electric trains, ships, etc.)  
(3) Medical equipment  
(8) Public information-processing equipment  
(9) Military equipment  
(10) Electric heating apparatus, burning equipment  
(11) Disaster prevention/crime prevention equipment  
(12) Safety equipment  
(4) Power-generation control equipment  
(5) Atomic energy-related equipment  
(6) Seabed equipment  
(13) Other applications that are not considered general-purpose  
applications  
(7) Transportation control equipment  
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing  
protection circuit/device or providing backup circuits in your equipment.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(3/23)  
I
N
D
U
C
T
O
R
S
Product compatible with RoHS directive  
Halogen-free  
Inductors for Standard Circuits  
Multilayer Ferrite  
Compatible with lead-free solders  
AEC-Q200  
Overview of the MLF Series  
FEATURES  
The lineup includes a wide inductance range.  
Highly reliable monolithic structure with multilayer integration.  
APPLICATION  
Automotive equipment, smart phones, tablet terminals, tuners, LCD-TVs, PDP-TVs, audio equipment, computers, signal processing for  
modules etc.  
PART NUMBER CONSTRUCTION  
MLF  
1608  
D
47N  
M
T
D25  
L×W×H Dimensions  
(mm)  
Inductance  
(μH)  
Inductance  
tolerance  
Series name  
characteristics  
Packaging style Internal code  
Taping  
1005  
1608  
1.0×0.5×0.5  
1.6×0.8×0.8  
A
C
D
E
G
K
V
J
5%  
T
0.010  
(10nH)  
10N  
K
M
10%  
20%  
2.0×1.25×0.85  
2.0×1.25×1.25  
R10  
1R0  
100  
0.1  
1
10  
2012  
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT  
ꢀ
Temperature range  
Package quantity  
Individual weight  
Operating  
temperature  
Storage  
temperature  
Type  
ꢀꢀ  
(pieces/reel)  
10,000  
4,000  
（°C）  
（°C）  
（mg）  
MLF1005  
MLF1608  
–55 to +125  
–40 to +85  
–55 to +125  
–40 to +85  
1.2  
4
t=0.85  
t=1.25  
4,000  
2,000  
10  
14  
MLF2012  
–40 to +85  
–40 to +85  
ꢀꢁ  
In case the product's inductance tolerance is J, both Operating and Storage temperature ranges are –55 to +125°C.  
The Storage temperature range is for after the circuit board is mounted.  
ꢀꢀꢁ  
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/  
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(4/23)  
I
N
D
U
C
T
O
R
S
Overview of the MLF Series  
RECOMMENDED REFLOW PROFILE  
Preheating  
Soldering  
Natural  
cooling  
Peak  
T4  
T3  
T3  
T2  
t3  
t2  
T1  
t1  
t: Time  
Preheating  
Temp.  
T1  
Soldering  
Temp.  
T3  
Peak  
Temp.  
T4  
Time  
t1  
60 to 120s  
Time  
t2  
30 to 60s  
Time  
t3  
T2  
180°C  
150°C  
230°C  
250 to 260°C 10s max.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(5/23)  
I
N
D
U
C
T
O
R
S
MLF series  
MLF1005 Type  
SHAPE & DIMENSIONS  
0.10min.  
0.10min.  
1.00 0.05  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
0.5  
0.4  
0.5  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(6/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF1005 Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
L, Q measuring  
conditions  
Self-resonant  
frequency(MHz) (ꢀ)  
DC resistance Rated current  
L
Q
(mA)  
Part No.  
Frequency Current  
(μH)  
Tolerance  
min. typ.  
min.  
typ.  
max.  
typ.  
max.  
(MHz)  
25  
25  
25  
25  
25  
25  
25  
10  
25  
10  
25  
10  
25  
10  
10  
10  
10  
10  
10  
10  
25  
25  
25  
25  
25  
25  
25  
10  
25  
10  
25  
10  
25  
10  
10  
10  
10  
10  
10  
10  
(mA)  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.39  
0.47  
0.47  
0.56  
0.56  
0.68  
0.82  
1.0  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
10  
10  
15  
15  
15  
15  
15  
30  
15  
30  
15  
30  
15  
30  
30  
30  
30  
30  
30  
30  
10  
10  
15  
15  
15  
15  
15  
30  
15  
30  
15  
30  
15  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
50  
30  
55  
30  
55  
30  
55  
60  
60  
60  
60  
60  
60  
25  
25  
25  
30  
30  
30  
30  
50  
30  
50  
30  
50  
30  
50  
50  
50  
50  
50  
50  
50  
450  
400  
350  
320  
290  
260  
230  
210  
210  
190  
190  
170  
170  
150  
130  
120  
110  
100  
90  
880  
800  
650  
600  
450  
450  
380  
600  
330  
460  
300  
450  
250  
360  
320  
290  
230  
200  
180  
150  
880  
800  
650  
600  
450  
450  
380  
600  
330  
460  
300  
450  
250  
360  
320  
290  
230  
200  
180  
150  
0.51  
0.59  
0.63  
0.72  
0.79  
0.91  
1.05  
0.41  
1.35  
0.42  
1.50  
0.47  
1.95  
0.55  
0.59  
0.64  
0.79  
0.95  
1.05  
1.30  
0.51  
0.59  
0.63  
0.72  
0.79  
0.91  
1.05  
0.41  
1.35  
0.42  
1.50  
0.47  
1.95  
0.55  
0.59  
0.64  
0.79  
0.95  
1.05  
1.30  
0.33  
0.33  
0.39  
0.40  
0.47  
0.65  
0.80  
0.24  
0.89  
0.25  
0.95  
0.34  
1.35  
0.43  
0.43  
0.45  
0.55  
0.68  
0.75  
0.99  
0.33  
0.33  
0.39  
0.40  
0.47  
0.65  
0.80  
0.24  
0.89  
0.25  
0.95  
0.34  
1.35  
0.43  
0.43  
0.45  
0.55  
0.68  
0.75  
0.99  
180  
180  
180  
160  
160  
150  
140  
50  
130  
50  
120  
45  
120  
45  
40  
40  
35  
MLF1005VR10JT000  
MLF1005VR12JT000  
MLF1005VR15JT000  
MLF1005VR18JT000  
MLF1005VR22JT000  
MLF1005VR27JT000  
MLF1005VR33JT000  
MLF1005GR39JT000  
MLF1005VR39JT000  
MLF1005GR47JT000  
MLF1005VR47JT000  
MLF1005GR56JT000  
MLF1005VR56JT000  
MLF1005GR68JT000  
MLF1005GR82JT000  
MLF1005G1R0JT000  
MLF1005G1R2JT000  
MLF1005G1R5JT000  
MLF1005G1R8JT000  
MLF1005G2R2JT000  
MLF1005VR10KT000  
MLF1005VR12KT000  
MLF1005VR15KT000  
MLF1005VR18KT000  
MLF1005VR22KT000  
MLF1005VR27KT000  
MLF1005VR33KT000  
MLF1005GR39KT000  
MLF1005VR39KT000  
MLF1005GR47KT000  
MLF1005VR47KT000  
MLF1005GR56KT000  
MLF1005VR56KT000  
MLF1005GR68KT000  
MLF1005GR82KT000  
MLF1005G1R0KT000  
MLF1005G1R2KT000  
MLF1005G1R5KT000  
MLF1005G1R8KT000  
MLF1005G2R2KT000  
1.2  
1.5  
1.8  
2.2  
5%  
5%  
5%  
5%  
35  
30  
30  
80  
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.39  
0.47  
0.47  
0.56  
0.56  
0.68  
0.82  
1.0  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
450  
400  
350  
320  
290  
260  
230  
210  
210  
190  
190  
170  
170  
150  
130  
120  
110  
100  
90  
180  
180  
180  
160  
160  
150  
140  
50  
130  
50  
120  
45  
120  
45  
40  
40  
35  
1.2  
1.5  
1.8  
2.2  
35  
30  
30  
80  
○ Measurement equipment  
Measurement item  
L, Q  
Self-resonant frequency  
DC resistance  
Product No.  
4294A+16034G  
E4991A  
Manufacturer  
Agilent Technologies  
Agilent Technologies  
Yokogawa  
Type-7561  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(7/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF1005 Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
10  
G1R8  
G1R2  
GR39  
1
GR82  
GR56  
VR33  
VR22  
0.1  
VR15  
VR10  
VR47  
0.01  
1
10  
100  
1000  
(
)
Frequency MHz  
10  
G2R2  
G1R5  
GR47  
G1R0  
GR68  
1
VR39  
VR27  
VR18  
VR12  
0.1  
0.01  
VR56  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
E4991A+16192A  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(8/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF1005 Type  
ELECTRICAL CHARACTERISTICS  
Q FREQUENCY CHARACTERISTICS GRAPH  
70  
60  
GR39  
G1R2  
VR10  
50  
40  
30  
20  
10  
0
VR22  
GR56  
G1R8  
VR47  
GR82  
VR33  
VR15  
1
10  
100  
1000  
(
)
Frequency MHz  
70  
60  
50  
40  
30  
20  
10  
0
G1R0  
VR27  
VR39  
VR56  
GR68  
GR47  
VR12  
VR18  
G1R5  
G2R2  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
E4991A+16192A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(9/23)  
I
N
D
U
C
T
O
R
S
MLF series  
MLF1608 Type  
SHAPE & DIMENSIONS  
0.30 0.20  
0.30 0.20  
1.60 0.15  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
0.6  
0.8  
0.6  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(10/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF1608 Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
L, Q measuring  
conditions  
Self-resonant  
frequency(MHz) (ꢀ)  
DC resistance Rated current  
L
Q
(mA)  
Part No.  
Frequency Current  
(μH)  
0.10  
Tolerance  
min. typ.  
min.  
typ.  
max.  
typ.  
max.  
(MHz)  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
10  
10  
10  
10  
10  
10  
10  
10  
10  
4
(mA)  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.1  
0.1  
0.1  
0.1  
0.1  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
30  
30  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
35  
35  
35  
35  
35  
35  
35  
35  
35  
25  
25  
25  
25  
25  
25  
25  
25  
30  
30  
30  
30  
50  
50  
55  
55  
55  
55  
60  
60  
60  
60  
60  
60  
55  
55  
25  
25  
25  
25  
25  
25  
25  
25  
30  
30  
30  
30  
50  
50  
55  
55  
55  
55  
60  
60  
60  
450  
400  
350  
320  
290  
260  
230  
210  
190  
170  
150  
130  
120  
110  
100  
90  
80  
70  
65  
60  
55  
45  
40  
35  
600  
550  
500  
450  
400  
350  
320  
290  
260  
230  
210  
190  
170  
150  
140  
130  
120  
110  
100  
90  
0.35  
0.40  
0.45  
0.50  
0.55  
0.60  
0.75  
0.85  
0.95  
1.05  
1.25  
1.40  
0.50  
0.65  
0.70  
0.85  
1.00  
1.15  
1.30  
1.45  
1.60  
1.10  
1.30  
1.50  
1.70  
1.80  
0.35  
0.40  
0.45  
0.50  
0.55  
0.60  
0.75  
0.85  
0.95  
1.05  
1.25  
1.40  
0.50  
0.65  
0.70  
0.85  
1.00  
1.15  
1.30  
1.45  
1.60  
0.20  
0.20  
0.25  
0.25  
0.30  
0.35  
0.40  
0.45  
0.50  
0.55  
0.65  
0.75  
0.25  
0.25  
0.30  
0.35  
0.45  
0.50  
0.55  
0.65  
0.75  
0.55  
0.65  
0.80  
1.00  
1.20  
0.20  
0.20  
0.25  
0.25  
0.30  
0.35  
0.40  
0.45  
0.50  
0.55  
0.65  
0.75  
0.25  
0.25  
0.30  
0.35  
0.45  
0.50  
0.55  
0.65  
0.75  
200  
200  
200  
150  
150  
150  
100  
100  
100  
100  
70  
70  
50  
50  
50  
50  
30  
30  
30  
30  
30  
15  
15  
10  
10  
10  
200  
200  
200  
150  
150  
150  
100  
100  
100  
100  
70  
MLF1608DR10JT000  
MLF1608DR12JT000  
MLF1608DR15JT000  
MLF1608DR18JT000  
MLF1608DR22JT000  
MLF1608DR27JT000  
MLF1608DR33JT000  
MLF1608DR39JT000  
MLF1608DR47JT000  
MLF1608DR56JT000  
MLF1608DR68JT000  
MLF1608DR82JT000  
MLF1608A1R0JT000  
MLF1608A1R2JT000  
MLF1608A1R5JT000  
MLF1608A1R8JT000  
MLF1608A2R2JT000  
MLF1608A2R7JT000  
MLF1608A3R3JT000  
MLF1608A3R9JT000  
MLF1608A4R7JT000  
MLF1608E5R6JT000  
MLF1608E6R8JT000  
MLF1608E8R2JT000  
MLF1608E100JT000  
MLF1608E120JT000  
MLF1608DR10KTA00  
MLF1608DR12KTA00  
MLF1608DR15KTA00  
MLF1608DR18KTA00  
MLF1608DR22KTA00  
MLF1608DR27KTA00  
MLF1608DR33KTA00  
MLF1608DR39KTA00  
MLF1608DR47KTA00  
MLF1608DR56KTA00  
MLF1608DR68KTA00  
MLF1608DR82KTA00  
MLF1608A1R0KTA00  
MLF1608A1R2KTA00  
MLF1608A1R5KTA00  
MLF1608A1R8KTA00  
MLF1608A2R2KTA00  
MLF1608A2R7KTA00  
MLF1608A3R3KTA00  
MLF1608A3R9KTA00  
MLF1608A4R7KTA00  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
12  
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
80  
70  
60  
55  
50  
45  
4
4
2
2
5%  
5%  
30  
25  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
10  
10  
10  
10  
10  
10  
10  
10  
10  
450  
400  
350  
320  
290  
260  
230  
210  
190  
170  
150  
130  
120  
110  
100  
90  
600  
550  
500  
450  
400  
350  
320  
290  
260  
230  
210  
190  
170  
150  
140  
130  
120  
110  
100  
90  
70  
50  
50  
50  
50  
30  
30  
30  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
80  
70  
65  
60  
30  
30  
55  
80  
○ Measurement equipment  
Measurement item  
L, Q  
Self-resonant frequency  
DC resistance  
Product No.  
4294A+16034G  
E4991A  
Manufacturer  
Agilent Technologies  
Agilent Technologies  
Yokogawa  
Type-7561  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(11/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF1608 Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
L, Q measuring  
conditions  
Self-resonant  
frequency(MHz) (ꢀ)  
DC resistance Rated current  
L
Q
(mA)  
Part No.  
Frequency Current  
(μH)  
Tolerance  
min. typ.  
min.  
typ.  
max.  
typ.  
max.  
(MHz)  
(mA)  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
1.0  
1.0  
1.0  
5.6  
6.8  
8.2  
10  
12  
15  
18  
22  
27  
33  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
20%  
20%  
20%  
35  
35  
35  
30  
30  
20  
20  
20  
20  
20  
10  
10  
10  
60  
60  
60  
55  
55  
40  
40  
40  
40  
40  
20  
20  
20  
4
4
4
2
2
1
1
1
1
45  
40  
35  
30  
25  
22  
20  
18  
15  
70  
60  
55  
50  
45  
42  
40  
38  
35  
1.10  
1.30  
1.50  
1.70  
1.80  
1.50  
1.60  
1.70  
1.80  
2.20  
0.20  
0.30  
0.30  
0.55  
0.65  
0.80  
1.00  
1.20  
0.80  
0.85  
0.90  
1.20  
1.40  
0.10  
0.15  
0.15  
15  
15  
10  
10  
10  
2
2
2
2
2
MLF1608E5R6KTA00  
MLF1608E6R8KTA00  
MLF1608E8R2KTA00  
MLF1608E100KTD00  
MLF1608E120KTD00  
MLF1608C150KTA00  
MLF1608C180KTA00  
MLF1608C220KTA00  
MLF1608C270KTD00  
MLF1608C330KTD00  
MLF1608D47NMTA00  
MLF1608D68NMTA00  
MLF1608D82NMTA00  
1
10  
30  
0.047  
0.068  
0.082  
50  
50  
50  
600  
550  
500  
900  
700  
650  
200  
200  
200  
○ Measurement equipment  
Measurement item  
L, Q  
Self-resonant frequency  
DC resistance  
Product No.  
4294A+16034G  
E4991A  
Manufacturer  
Agilent Technologies  
Agilent Technologies  
Yokogawa  
Type-7561  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(12/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF1608 Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
E100  
E6R8  
10  
1
A4R7  
A3R3  
A2R2  
DR68  
A1R0  
A1R5  
DR47  
DR33  
DR22  
DR15  
0.1  
0.01  
DR10  
1
10  
100  
1000  
(
)
Frequency MHz  
100  
10  
E120  
E5R6  
E8R2  
A3R9  
A2R7  
A1R8  
DR82  
DR56  
DR39  
A1R2  
1
DR27  
DR18  
0.1  
0.01  
DR12  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
E4991A+16192A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(13/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF1608 Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
C330  
C270  
10  
C220  
C150  
C180  
1
0.1  
0.1  
1
10  
100  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A+16034G  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(14/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF1608 Type  
ELECTRICAL CHARACTERISTICS  
Q FREQUENCY CHARACTERISTICS GRAPH  
70  
A3R3  
A1R0  
60  
50  
40  
A1R5  
A2R2  
DR47  
DR33  
DR15  
DR22  
E6R8  
E100  
30  
20  
10  
0
DR10  
DR68  
1
10  
100  
1000  
(
)
Frequency MHz  
70  
60  
50  
40  
30  
20  
10  
0
A3R9  
A1R2  
E8R2  
E5R6  
A1R8  
A2R7  
DR12  
E120  
DR82  
DR18  
DR56  
DR39  
DR27  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
E4991A+16192A  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(15/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF1608 Type  
ELECTRICAL CHARACTERISTICS  
Q FREQUENCY CHARACTERISTICS GRAPH  
70  
60  
50  
C150  
C330  
40  
30  
20  
10  
0
C270  
C180  
C220  
0.1  
1
10  
100  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A+16034G  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(16/23)  
I
N
D
U
C
T
O
R
S
MLF series  
MLF2012 Type  
SHAPE & DIMENSIONS  
0.50 0.30  
0.50 0.30  
2.00 0.20  
T
0.85 0.20  
1.25 0.20  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
0.8  
1.0  
0.8  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(17/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF2012 Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
Rated  
current  
(mA)  
L, Q measuring  
conditions  
Self-resonant  
frequency(MHz) (ꢀ)  
DC resistance  
L
Q
Thickness  
T
Part No.  
(mm)  
Frequency Current  
(μH)  
0.10  
Tolerance min. typ.  
min.  
typ.  
max.  
typ.  
max.  
(MHz)  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
10  
10  
10  
10  
10  
10  
10  
10  
10  
4
(mA)  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.1  
0.1  
0.1  
0.1  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
5%  
20  
20  
20  
20  
20  
20  
20  
25  
25  
25  
25  
25  
45  
45  
45  
45  
45  
45  
45  
45  
45  
50  
50  
50  
50  
50  
20  
20  
20  
20  
20  
20  
20  
25  
25  
25  
25  
25  
45  
45  
45  
45  
45  
45  
45  
45  
45  
30  
30  
30  
30  
30  
30  
30  
35  
35  
35  
35  
35  
55  
55  
60  
60  
60  
70  
70  
70  
70  
75  
75  
75  
75  
75  
30  
30  
30  
30  
30  
30  
30  
35  
35  
35  
35  
35  
55  
55  
60  
60  
60  
70  
70  
70  
70  
400  
360  
320  
280  
250  
220  
200  
180  
160  
150  
140  
130  
120  
110  
100  
90  
80  
70  
60  
55  
50  
45  
40  
35  
500  
450  
410  
370  
330  
300  
270  
250  
230  
210  
190  
170  
160  
150  
140  
130  
120  
100  
90  
0.15  
0.20  
0.20  
0.25  
0.30  
0.35  
0.40  
0.45  
0.50  
0.55  
0.60  
0.65  
0.30  
0.35  
0.40  
0.45  
0.50  
0.55  
0.60  
0.65  
0.70  
0.60  
0.65  
0.70  
0.80  
0.90  
0.15  
0.20  
0.20  
0.25  
0.30  
0.35  
0.40  
0.45  
0.50  
0.55  
0.60  
0.65  
0.30  
0.35  
0.40  
0.45  
0.50  
0.55  
0.60  
0.65  
0.70  
0.10  
0.12  
0.13  
0.15  
0.16  
0.18  
0.23  
0.25  
0.25  
0.30  
0.35  
0.40  
0.15  
0.15  
0.18  
0.20  
0.22  
0.25  
0.28  
0.30  
0.35  
0.30  
0.32  
0.35  
0.40  
0.50  
0.10  
0.12  
0.13  
0.15  
0.16  
0.18  
0.23  
0.25  
0.25  
0.30  
0.35  
0.40  
0.15  
0.15  
0.18  
0.20  
0.22  
0.25  
0.28  
0.30  
0.35  
300  
300  
300  
300  
250  
250  
250  
200  
200  
150  
150  
150  
80  
80  
80  
80  
50  
50  
50  
30  
30  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
1.25  
1.25  
1.25  
1.25  
0.85  
0.85  
0.85  
0.85  
0.85  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
1.25  
1.25  
1.25  
1.25  
0.85  
0.85  
0.85  
0.85  
0.85  
1.25  
1.25  
1.25  
1.25  
MLF2012DR10JT000  
MLF2012DR12JT000  
MLF2012DR15JT000  
MLF2012DR18JT000  
MLF2012DR22JT000  
MLF2012DR27JT000  
MLF2012DR33JT000  
MLF2012DR39JT000  
MLF2012DR47JT000  
MLF2012DR56JT000  
MLF2012DR68JT000  
MLF2012DR82JT000  
MLF2012A1R0JT000  
MLF2012A1R2JT000  
MLF2012A1R5JT000  
MLF2012A1R8JT000  
MLF2012A2R2JT000  
MLF2012A2R7JT000  
MLF2012A3R3JT000  
MLF2012A3R9JT000  
MLF2012A4R7JT000  
MLF2012E5R6JT000  
MLF2012E6R8JT000  
MLF2012E8R2JT000  
MLF2012E100JT000  
MLF2012E120JT000  
MLF2012DR10KT000  
MLF2012DR12KT000  
MLF2012DR15KT000  
MLF2012DR18KT000  
MLF2012DR22KT000  
MLF2012DR27KT000  
MLF2012DR33KT000  
MLF2012DR39KT000  
MLF2012DR47KT000  
MLF2012DR56KT000  
MLF2012DR68KT000  
MLF2012DR82KT000  
MLF2012A1R0KT000  
MLF2012A1R2KT000  
MLF2012A1R5KT000  
MLF2012A1R8KT000  
MLF2012A2R2KT000  
MLF2012A2R7KT000  
MLF2012A3R3KT000  
MLF2012A3R9KT000  
MLF2012A4R7KT000  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
12  
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
80  
70  
65  
60  
55  
50  
45  
15  
15  
15  
15  
4
4
2
2
30  
25  
5%  
15  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
10  
10  
10  
10  
10  
10  
10  
10  
10  
400  
360  
320  
280  
250  
220  
200  
180  
160  
150  
140  
130  
120  
110  
100  
90  
500  
450  
410  
370  
330  
300  
270  
250  
230  
210  
190  
170  
160  
150  
140  
130  
120  
100  
90  
300  
300  
300  
300  
250  
250  
250  
200  
200  
150  
150  
150  
80  
80  
80  
80  
50  
50  
50  
30  
30  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
80  
70  
60  
55  
80  
70  
50  
○ Measurement equipment  
Measurement item  
L, Q  
Self-resonant frequency  
DC resistance  
Product No.  
4294A+16034G  
E4991A  
Manufacturer  
Agilent Technologies  
Agilent Technologies  
Yokogawa  
Type-7561  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(18/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF2012 Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
Rated  
current  
(mA)  
L, Q measuring  
conditions  
Self-resonant  
frequency(MHz) (ꢀ)  
DC resistance  
L
Q
Thickness  
T
Part No.  
(mm)  
Frequency Current  
(μH)  
5.6  
6.8  
8.2  
Tolerance min. typ.  
min.  
typ.  
max.  
typ.  
max.  
(MHz)  
(mA)  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
1.0  
1.0  
1.0  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
10%  
50  
50  
50  
50  
50  
30  
30  
30  
30  
30  
35  
35  
35  
25  
25  
25  
15  
15  
15  
75  
75  
75  
75  
75  
45  
45  
45  
45  
45  
55  
55  
55  
45  
45  
45  
25  
25  
25  
4
4
4
2
2
1
1
1
45  
40  
35  
30  
25  
22  
20  
18  
17  
15  
13  
11  
10  
9
65  
60  
55  
50  
45  
40  
38  
35  
33  
28  
23  
20  
18  
16  
14  
12  
0.60  
0.65  
0.70  
0.80  
0.90  
0.70  
0.80  
0.90  
1.00  
1.10  
2.40  
2.70  
2.80  
2.90  
3.00  
3.10  
0.10  
0.15  
0.15  
0.30  
0.32  
0.35  
0.40  
0.50  
0.35  
0.38  
0.45  
0.50  
0.55  
1.30  
1.60  
1.80  
2.00  
2.40  
2.50  
0.05  
0.08  
0.08  
15  
15  
15  
15  
15  
5
5
5
5
5
4
4
4
2
2
2
300  
300  
300  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
1.25  
0.85  
0.85  
0.85  
MLF2012E5R6KT000  
MLF2012E6R8KT000  
MLF2012E8R2KT000  
MLF2012E100KT000  
MLF2012E120KT000  
MLF2012C150KT000  
MLF2012C180KT000  
MLF2012C220KT000  
MLF2012C270KT000  
MLF2012C330KT000  
MLF2012K390KT000  
MLF2012K470KT000  
MLF2012K560KT000  
MLF2012C680KT000  
MLF2012C820KT000  
MLF2012C101KT000  
MLF2012D47NMT000  
MLF2012D68NMT000  
MLF2012D82NMT000  
10  
12  
15  
18  
22  
27  
33  
39  
47  
56  
68  
82  
100  
1
0.4  
2
2
2
1
1
1
50  
50  
50  
8
7
550  
500  
450  
0.047 20%  
0.068 20%  
0.082 20%  
700  
600  
550  
○ Measurement equipment  
Measurement item  
L, Q  
Self-resonant frequency  
DC resistance  
Product No.  
4294A+16034G  
E4991A  
Manufacturer  
Agilent Technologies  
Agilent Technologies  
Yokogawa  
Type-7561  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(19/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF2012 Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
E100  
E6R8  
10  
1
A4R7  
DR68  
A3R3  
A2R2  
A1R5  
DR47  
A1R0  
DR33  
DR22  
DR15  
0.1  
0.01  
DR10  
1
10  
100  
1000  
(
)
Frequency MHz  
100  
10  
E120  
E8R2  
A1R2  
A3R9  
A2R7  
E5R6  
DR82  
DR56  
A1R8  
1
DR39  
DR27  
DR18  
0.1  
0.01  
DR12  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
E4991A+16192A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(20/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF2012 Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
C101  
C680  
C820  
K560  
K470  
K390  
10  
C270  
C220  
C330  
C150  
1
C180  
0.1  
0.1  
1
10  
100  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
4294A+16034G  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(21/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF2012 Type  
ELECTRICAL CHARACTERISTICS  
Q FREQUENCY CHARACTERISTICS GRAPH  
90  
A4R7  
80  
A3R3  
70  
A2R2  
E100  
DR22  
DR15  
A1R5  
60  
E6R8  
DR33  
50  
A1R0  
40  
30  
20  
10  
0
DR47  
DR10  
DR68  
1
10  
100  
1000  
(
)
Frequency MHz  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
A3R9  
E8R2  
E5R6  
E120  
A2R7  
DR18  
DR39  
A1R8  
A1R2  
DR12  
DR82  
DR56  
DR27  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
E4991A+16192A  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(22/23)  
I
N
D
U
C
T
O
R
S
MLF seriesꢀ  
MLF2012 Type  
Q FREQUENCY CHARACTERISTICS GRAPH  
90  
80  
70  
60  
K470  
C270  
C330  
50  
C180  
K560  
K390  
40  
C101  
C220  
30  
C680  
C820  
20  
C150  
10  
0
0.1  
1
10  
100  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
4294A+16034G  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.
(23/23)  
I
N
D
U
C
T
O
R
S
MLF series  
Packaging Style  
REEL DIMENSIONS  
1.0  
+2.0  
2.0 0.5  
ø13 0.2  
ø21 0.8  
8.4  
–0.0  
14.4max.  
ø180 2.0  
Dimensions in mm  
TAPE DIMENSIONS  
Type  
A
B
K
MLF1005  
MLF1608  
1.15 0.1 0.65 0.1 0.8 max.  
+0.1  
1.5  
Sprocket hole  
Cavity  
–0.0  
1.9 0.2  
2.3 0.2  
2.3 0.2  
1.1 0.2  
1.5 0.2  
1.5 0.2  
1.1 max.  
1.1 max.  
1.5 max.  
t=0.85  
t=1.25  
MLF2012  
K
B
4.0 0.1  
2.0 0.05  
2.0 0.05  
200min.  
160min.  
Taping  
300min.  
Drawing direction  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20140228 / inductor_automotive_standard_mlf_en.

相关型号：

MLF2012A4R7M

 FIXED IND 4.7UH 30MA 700 MOHM
TDK

MLF2012A4R7MB

 General Purpose Inductor, 4.7uH, 20%, 1 Element, Ferrite-Core, SMD,
TDK

MLF2012A4R7MT000

 Inductors (Coils)
TDK

MLF2012A4R7MTD25

 FIXED IND 4.7UH 30MA 700 MOHM
TDK

MLF2012A4R7XT

 SMD
TDK

MLF2012AR10JT

 Multilayer Ferrite
TDK

MLF2012AR10JT000

 Multilayer Ferrite
TDK

MLF2012AR10KT

 General Purpose Inductor, 0.1uH, 10%, Ferrite-Core, 0805
TDK

MLF2012AR10KT000

 Multilayer Ferrite
TDK

MLF2012AR10MT

 Multilayer Ferrite
TDK

MLF2012AR10MT000

 Multilayer Ferrite
TDK

MLF2012C100JT

 Multilayer Ferrite
TDK
©2020 ICPDF网 联系我们和版权申明