MLG1005S1N3STD25 [TDK]
General Purpose Inductor,;
| 型号： | MLG1005S1N3STD25 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | General Purpose Inductor, 测试 射频感应器 电感器 |
| 文件： | 总16页 (文件大小：420K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
I N D U C T O R S
December 2017
Inductors for high frequency circuits
Multilayer ceramic
MLG series (for automotive)
MLG1005S type
MLG1005S
1005 [0402 inch]*
* Dimensions Code JIS[EIA]
(2/16)
I N D U C T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(3/16)
I N D U C T O R S
Product compatible with RoHS directive
Halogen-free
Inductors for high frequency circuits
Multilayer ceramic
Compatible with lead-free solders
AEC-Q200
Overview of MLG1005S type
FEATURES
Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for High-
frequency.
APPLICATION
Automotive equipment, smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners
and other high frequency circuits for the mobile communication industry
PART NUMBER CONSTRUCTION
MLG
1005
S
0N3
B
T
D25
L×W×H Dimensions
(mm)
Inductance
(nH)
Product internal
Inductance
tolerance
Series name
Packaging style
Internal code
code
1005
1.0×0.5×0.5
S
1N1
1.1
11
100
B
0.1nH
0.2nH
0.3nH
3%
T
Taping
D25
11N
R10
1R0
C
S
H
J
1000
5%
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight
Operating
temperature
Storage
temperature
Type
(pieces/reel)
（°C）
（°C）
（mg）
MLG1005S
–55 to +125
–55 to +125
10000
1
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(4/16)
I N D U C T O R S
MLG1005S type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
30 to 60s
Time
t3
10s max.
T2
180°C
150°C
230°C
250 to 260°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(5/16)
I N D U C T O R S
MLG1005S type
SHAPE & DIMENSIONS
0.25 0.10
0.25 0.10
1.00 0.05
Dimensions in mm
RECOMMENDED LAND PATTERN
0.5
0.4
0.5
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(6/16)
I N D U C T O R S
MLG1005S type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Part No.
L
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
(nH)
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.5
1.5
1.5
1.6
1.6
1.6
1.8
1.8
1.8
2.0
2.0
2.0
2.2
2.2
2.2
2.4
2.4
2.4
Tolerance
0.1nH
0.2nH
0.1nH
0.2nH
0.1nH
0.2nH
0.1nH
0.2nH
0.1nH
0.2nH
0.1nH
0.2nH
0.1nH
0.2nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
min.
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
(GHz)min. (GHz)typ.
()max. ()typ.
(mA)max.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
900
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
20up
20up
20up
20up
20up
20up
20up
20up
18.7
18.7
16.4
16.4
17.7
17.7
13.8
13.8
13.8
19.3
19.3
19.3
11.6
11.6
11.6
11.7
11.7
11.7
9.6
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.12
0.12
0.12
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.04
0.04
0.04
0.04
0.04
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.06
0.06
0.06
0.05
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.08
MLG1005S0N3BTD25
MLG1005S0N3CTD25
MLG1005S0N4BTD25
MLG1005S0N4CTD25
MLG1005S0N5BTD25
MLG1005S0N5CTD25
MLG1005S0N6BTD25
MLG1005S0N6CTD25
MLG1005S0N7BTD25
MLG1005S0N7CTD25
MLG1005S0N8BTD25
MLG1005S0N8CTD25
MLG1005S0N9BTD25
MLG1005S0N9CTD25
MLG1005S1N0BTD25
MLG1005S1N0CTD25
MLG1005S1N0STD25
MLG1005S1N1BTD25
MLG1005S1N1CTD25
MLG1005S1N1STD25
MLG1005S1N2BTD25
MLG1005S1N2CTD25
MLG1005S1N2STD25
MLG1005S1N3BTD25
MLG1005S1N3CTD25
MLG1005S1N3STD25
MLG1005S1N5BTD25
MLG1005S1N5CTD25
MLG1005S1N5STD25
MLG1005S1N6BTD25
MLG1005S1N6CTD25
MLG1005S1N6STD25
MLG1005S1N8BTD25
MLG1005S1N8CTD25
MLG1005S1N8STD25
MLG1005S2N0BTD25
MLG1005S2N0CTD25
MLG1005S2N0STD25
MLG1005S2N2BTD25
MLG1005S2N2CTD25
MLG1005S2N2STD25
MLG1005S2N4BTD25
MLG1005S2N4CTD25
MLG1005S2N4STD25
—
—
—
—
—
—
—
—
—
—
—
—
—
—
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8.00
8.00
8.00
8.00
8.00
8.00
7.50
7.50
7.50
8.00
8.00
8.00
7.50
7.50
7.50
7.00
7.00
7.00
7.00
7.00
7.00
9.6
9.6
9.4
9.4
9.4
10.3
10.3
10.3
9.3
9.3
9.3
900
900
900
900
900
900
900
900
8.6
8.6
8.6
8.2
8.2
8.2
7
7
7
7
800
800
800
7
Please contact us for 2% inductance tolerance (code G) products.
○ Measurement equipment
Measurement item
Product No.
4291B +16193A
8720C
Manufacturer
L, Q
Keysight Technologies
Keysight Technologies
Yokogawa
Self-resonant frequency
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(7/16)
I N D U C T O R S
MLG1005S type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Part No.
L
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
(nH)
2.7
2.7
2.7
3.0
3.0
3.0
3.3
3.3
3.3
3.6
3.6
3.6
3.9
3.9
3.9
4.3
4.3
4.7
4.7
5.1
5.1
5.6
5.6
6.2
6.2
6.8
6.8
7.5
7.5
8.2
8.2
9.1
9.1
10
Tolerance
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.1nH
0.2nH
0.3nH
0.2nH
0.3nH
0.2nH
0.3nH
0.2nH
0.3nH
0.2nH
0.3nH
3%
0.3nH
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
min.
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
(GHz)min. (GHz)typ.
()max. ()typ.
(mA)max.
800
800
800
800
800
800
800
800
800
700
700
700
700
700
700
700
700
700
700
600
600
600
600
600
600
600
600
500
500
500
500
500
500
500
500
400
400
400
400
400
400
400
400
6.00
6.00
6.00
5.50
5.50
5.50
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
4.50
4.50
4.50
4.50
4.00
4.00
4.00
4.00
4.00
4.00
3.50
3.50
3.00
3.00
3.00
3.00
3.00
3.00
2.50
2.50
2.50
2.50
2.50
2.50
2.40
2.40
2.20
2.20
7.3
7.3
7.3
6.8
6.8
6.8
6.1
6.1
6.1
6.7
6.7
6.7
6.5
6.5
6.5
6.0
6.0
5.4
5.4
5.0
5.0
5.3
5.3
4.7
4.7
4.4
4.4
4.1
4.1
4.0
4.0
3.8
3.8
3.4
3.4
3.5
3.5
3.0
3.0
2.9
2.9
2.8
2.8
0.15
0.15
0.15
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.30
0.30
0.30
0.30
0.35
0.35
0.40
0.40
0.40
0.40
0.50
0.50
0.55
0.55
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.13
0.13
0.14
0.14
0.16
0.16
0.15
0.15
0.15
0.15
0.19
0.19
0.20
0.20
0.22
0.22
0.28
0.28
0.25
0.25
0.26
0.26
0.35
0.35
MLG1005S2N7BTD25
MLG1005S2N7CTD25
MLG1005S2N7STD25
MLG1005S3N0BTD25
MLG1005S3N0CTD25
MLG1005S3N0STD25
MLG1005S3N3BTD25
MLG1005S3N3CTD25
MLG1005S3N3STD25
MLG1005S3N6BTD25
MLG1005S3N6CTD25
MLG1005S3N6STD25
MLG1005S3N9BTD25
MLG1005S3N9CTD25
MLG1005S3N9STD25
MLG1005S4N3CTD25
MLG1005S4N3STD25
MLG1005S4N7CTD25
MLG1005S4N7STD25
MLG1005S5N1CTD25
MLG1005S5N1STD25
MLG1005S5N6CTD25
MLG1005S5N6STD25
MLG1005S6N2HTD25
MLG1005S6N2STD25
MLG1005S6N8HTD25
MLG1005S6N8JTD25
MLG1005S7N5HTD25
MLG1005S7N5JTD25
MLG1005S8N2HTD25
MLG1005S8N2JTD25
MLG1005S9N1HTD25
MLG1005S9N1JTD25
MLG1005S10NHTD25
MLG1005S10NJTD25
MLG1005S11NHTD25
MLG1005S11NJTD25
MLG1005S12NHTD25
MLG1005S12NJTD25
MLG1005S13NHTD25
MLG1005S13NJTD25
MLG1005S15NHTD25
MLG1005S15NJTD25
10
11
11
12
12
13
13
15
3%
5%
15
Please contact us for 2% inductance tolerance (code G) products.
○ Measurement equipment
Measurement item
Product No.
4291B +16193A
8720C
Manufacturer
L, Q
Keysight Technologies
Keysight Technologies
Yokogawa
Self-resonant frequency
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(8/16)
I N D U C T O R S
MLG1005S type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Part No.
L
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
(nH)
16
16
18
18
20
20
22
22
24
24
27
27
30
30
33
33
36
36
39
39
43
43
47
47
51
51
56
56
62
62
68
68
75
75
82
82
91
91
100
100
110
110
120
120
Tolerance
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
min.
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
(GHz)min. (GHz)typ.
()max. ()typ.
(mA)max.
400
400
350
350
350
350
350
350
350
350
300
300
300
300
300
300
250
250
250
250
250
250
250
250
250
250
200
200
200
200
200
200
200
200
200
200
200
200
200
200
150
150
150
150
2.10
2.10
2.00
2.00
1.90
1.90
1.70
1.70
1.70
1.70
1.60
1.60
1.50
1.50
1.40
1.40
1.30
1.30
1.20
1.20
1.20
1.20
1.10
1.10
1.10
1.10
1.00
1.00
1.00
1.00
0.80
0.80
0.75
0.75
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.60
0.60
2.7
2.7
2.5
2.5
2.4
2.4
2.2
2.2
2.1
2.1
2.0
2.0
1.9
1.9
1.8
1.8
1.7
1.7
1.6
1.6
1.6
1.6
1.4
1.4
1.5
1.5
1.3
1.3
1.3
1.3
1.1
1.1
1.1
1.1
1.0
1.0
0.9
0.9
0.9
0.9
0.9
0.9
0.8
0.8
0.55
0.55
0.60
0.60
0.60
0.60
0.70
0.70
0.70
0.70
0.80
0.80
0.80
0.80
0.90
0.90
1.00
1.00
1.00
1.00
1.10
1.10
1.20
1.20
1.20
1.20
1.30
1.30
1.40
1.40
1.50
1.50
1.50
1.50
1.60
1.60
1.80
1.80
2.00
2.00
2.20
2.20
2.20
2.20
0.32
0.32
0.40
0.40
0.38
0.38
0.46
0.46
0.43
0.43
0.53
0.53
0.50
0.50
0.59
0.59
0.62
0.62
0.65
0.65
0.67
0.67
0.75
0.75
0.72
0.72
0.83
0.83
0.85
0.85
0.87
0.87
0.93
0.93
1.01
1.01
1.14
1.14
1.37
1.37
1.48
1.48
1.48
1.48
MLG1005S16NHTD25
MLG1005S16NJTD25
MLG1005S18NHTD25
MLG1005S18NJTD25
MLG1005S20NHTD25
MLG1005S20NJTD25
MLG1005S22NHTD25
MLG1005S22NJTD25
MLG1005S24NHTD25
MLG1005S24NJTD25
MLG1005S27NHTD25
MLG1005S27NJTD25
MLG1005S30NHTD25
MLG1005S30NJTD25
MLG1005S33NHTD25
MLG1005S33NJTD25
MLG1005S36NHTD25
MLG1005S36NJTD25
MLG1005S39NHTD25
MLG1005S39NJTD25
MLG1005S43NHTD25
MLG1005S43NJTD25
MLG1005S47NHTD25
MLG1005S47NJTD25
MLG1005S51NHTD25
MLG1005S51NJTD25
MLG1005S56NHTD25
MLG1005S56NJTD25
MLG1005S62NHTD25
MLG1005S62NJTD25
MLG1005S68NHTD25
MLG1005S68NJTD25
MLG1005S75NHTD25
MLG1005S75NJTD25
MLG1005S82NHTD25
MLG1005S82NJTD25
MLG1005S91NHTD25
MLG1005S91NJTD25
MLG1005SR10HTD25
MLG1005SR10JTD25
MLG1005SR11HTD25
MLG1005SR11JTD25
MLG1005SR12HTD25
MLG1005SR12JTD25
Please contact us for 2% inductance tolerance (code G) products.
○ Measurement equipment
Measurement item
Product No.
4291B +16193A
8720C
Manufacturer
L, Q
Keysight Technologies
Keysight Technologies
Yokogawa
Self-resonant frequency
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(9/16)
I N D U C T O R S
MLG1005S type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Part No.
L
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
(nH)
130
130
150
150
160
160
180
180
200
200
220
220
240
240
270
270
300
300
330
330
360
360
390
390
Tolerance
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
3%
5%
min.
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
6
6
6
6
6
6
6
6
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
(GHz)min. (GHz)typ.
()max. ()typ.
(mA)max.
150
150
150
150
150
150
150
150
100
100
100
100
100
100
100
100
50
0.60
0.60
0.55
0.55
0.50
0.50
0.50
0.50
0.42
0.42
0.45
0.45
0.40
0.40
0.40
0.40
0.35
0.35
0.35
0.35
0.30
0.30
0.30
0.30
0.8
0.8
0.7
0.7
0.6
0.6
0.6
0.6
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
2.50
2.50
3.50
3.50
3.80
3.80
3.80
3.80
4.20
4.20
4.20
4.20
4.80
4.80
4.80
4.80
6.50
6.50
7.00
7.00
7.50
7.50
8.00
8.00
1.68
1.68
2.44
2.44
2.74
2.74
2.88
2.88
3.15
3.15
3.02
3.02
3.42
3.42
3.54
3.54
4.82
4.82
5.21
5.21
5.39
5.39
5.97
5.97
MLG1005SR13HTD25
MLG1005SR13JTD25
MLG1005SR15HTD25
MLG1005SR15JTD25
MLG1005SR16HTD25
MLG1005SR16JTD25
MLG1005SR18HTD25
MLG1005SR18JTD25
MLG1005SR20HTD25
MLG1005SR20JTD25
MLG1005SR22HTD25
MLG1005SR22JTD25
MLG1005SR24HTD25
MLG1005SR24JTD25
MLG1005SR27HTD25
MLG1005SR27JTD25
MLG1005SR30HTD25
MLG1005SR30JTD25
MLG1005SR33HTD25
MLG1005SR33JTD25
MLG1005SR36HTD25
MLG1005SR36JTD25
MLG1005SR39HTD25
MLG1005SR39JTD25
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Please contact us for 2% inductance tolerance (code G) products.
○ Measurement equipment
Measurement item
Product No.
4291B +16193A
8720C
Manufacturer
L, Q
Keysight Technologies
Keysight Technologies
Yokogawa
Self-resonant frequency
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(10/16)
I N D U C T O R S
MLG1005S type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
Q typ.
Part No.*
500MHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.4
1.4
1.4
1.5
1.5
1.5
1.7
1.7
1.7
1.9
1.9
1.9
2.1
2.1
2.1
800MHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.4
1.4
1.4
1.5
1.5
1.5
1.7
1.7
1.7
1.9
1.9
1.9
2.1
2.1
2.1
1.8GHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.4
1.4
1.4
1.5
1.5
1.5
1.7
1.7
1.7
1.9
1.9
1.9
2.1
2.1
2.1
2.0GHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.9
1.9
1.9
2.1
2.1
2.1
2.4GHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.9
1.9
1.9
2.2
2.2
2.2
500MHz
22min.
22min.
22min.
22min.
22min.
22min.
22
22
22
22
26
26
21
21
22
22
22
23
23
23
23
23
23
22
22
22
23
23
23
23
23
23
20
20
20
800MHz
27min.
27min.
27min.
27min.
27min.
27min.
27
27
28
28
34
34
27
27
29
29
29
29
29
29
29
29
29
27
27
27
29
29
29
29
29
29
26
26
26
1.8GHz
46min.
46min.
46min.
46min.
46min.
46min.
46
46
45
45
57
57
44
44
48
48
48
47
47
47
48
48
48
44
44
44
47
47
47
46
46
46
41
41
41
2.0GHz
49min.
49min.
49min.
49min.
49min.
49min.
49
49
49
49
60
60
47
47
50
50
50
50
50
50
50
50
50
47
47
47
50
50
50
49
49
49
43
43
43
2.4GHz
53min.
53min.
53min.
53min.
53min.
53min.
53
53
54
54
66
66
53
53
56
56
56
57
57
57
56
56
56
53
53
53
56
56
56
54
54
54
49
49
49
MLG1005S0N3BTD25
MLG1005S0N3CTD25
MLG1005S0N4BTD25
MLG1005S0N4CTD25
MLG1005S0N5BTD25
MLG1005S0N5CTD25
MLG1005S0N6BTD25
MLG1005S0N6CTD25
MLG1005S0N7BTD25
MLG1005S0N7CTD25
MLG1005S0N8BTD25
MLG1005S0N8CTD25
MLG1005S0N9BTD25
MLG1005S0N9CTD25
MLG1005S1N0BTD25
MLG1005S1N0CTD25
MLG1005S1N0CTD25
MLG1005S1N1BTD25
MLG1005S1N1CTD25
MLG1005S1N1STD25
MLG1005S1N2BTD25
MLG1005S1N2CTD25
MLG1005S1N2STD25
MLG1005S1N3BTD25
MLG1005S1N3CTD25
MLG1005S1N3STD25
MLG1005S1N5BTD25
MLG1005S1N5CTD25
MLG1005S1N5STD25
MLG1005S1N6BTD25
MLG1005S1N6CTD25
MLG1005S1N6STD25
MLG1005S1N8BTD25
MLG1005S1N8CTD25
MLG1005S1N8STD25
MLG1005S2N0BTD25
MLG1005S2N0CTD25
MLG1005S2N0STD25
MLG1005S2N2BTD25
MLG1005S2N2CTD25
MLG1005S2N2STD25
21
21
21
22
22
22
25
25
25
27
27
27
41
41
41
44
44
44
43
43
43
47
47
47
48
48
48
52
52
52
Please contact us for 2% inductance tolerance (code G) products.
○ Measurement equipment
Product No.
Manufacturer
4291B +16193A
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(11/16)
I N D U C T O R S
MLG1005S type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
Q typ.
Part No.*
500MHz
2.3
2.3
2.3
2.6
2.6
2.6
2.9
2.9
2.9
3.2
3.2
3.2
3.4
3.4
3.4
3.7
3.7
3.7
4.1
4.1
4.5
4.5
4.9
4.9
5.4
5.4
6.0
6.0
6.5
6.5
7.2
7.2
7.9
7.9
8.8
8.8
9.7
9.7
10.6
10.6
11.7
11.7
800MHz
2.3
2.3
2.3
2.6
2.6
2.6
2.9
2.9
2.9
3.2
3.2
3.2
3.4
3.4
3.4
3.7
3.7
3.7
4.1
4.1
4.5
4.5
4.9
4.9
5.4
5.4
6.0
6.0
6.6
6.6
7.4
7.4
8.0
8.0
9.0
9.0
9.9
9.9
10.9
10.9
12.1
12.1
1.8GHz
2.3
2.3
2.3
2.6
2.6
2.6
3.0
3.0
3.0
3.3
3.3
3.3
3.6
3.6
3.6
3.9
3.9
3.9
4.3
4.3
4.8
4.8
5.4
5.4
5.8
5.8
6.8
6.8
7.4
7.4
8.6
8.6
2.0GHz
2.3
2.3
2.3
2.7
2.7
2.7
3.0
3.0
3.0
3.4
3.4
3.4
3.6
3.6
3.6
3.9
3.9
3.9
4.4
4.4
4.9
4.9
5.6
5.6
5.9
5.9
7.1
7.1
7.8
7.8
9.2
9.2
2.4GHz
2.4
2.4
2.4
2.7
2.7
2.7
3.1
3.1
3.1
3.5
3.5
3.5
3.8
3.8
3.8
4.1
4.1
4.1
4.6
4.6
5.2
5.2
6.1
6.1
6.3
6.3
7.8
7.8
8.6
8.6
500MHz
21
21
21
22
22
22
24
24
24
24
24
24
21
21
21
22
22
22
24
24
23
23
23
23
22
22
24
24
23
23
24
24
23
23
24
24
24
24
23
23
23
23
800MHz
26
26
26
27
27
27
29
29
29
30
30
30
26
26
26
28
28
28
30
30
30
30
29
29
28
28
29
29
28
28
30
30
28
28
30
30
30
30
28
28
29
29
1.8GHz
42
42
42
43
43
43
47
47
47
46
46
46
40
40
40
43
43
43
47
47
45
45
42
42
42
42
42
42
40
40
41
41
38
38
40
40
37
37
34
34
33
33
2.0GHz
44
44
44
45
45
45
49
49
49
48
48
48
42
42
42
45
45
45
49
49
47
47
43
43
43
43
43
43
41
41
41
41
38
38
39
39
36
36
33
33
31
31
2.4GHz
49
49
49
50
50
50
54
54
54
53
53
53
46
46
46
50
50
50
53
53
50
50
44
44
45
45
43
43
41
41
39
39
36
36
36
36
31
31
28
28
MLG1005S2N4BTD25
MLG1005S2N4CTD25
MLG1005S2N4STD25
MLG1005S2N7BTD25
MLG1005S2N7CTD25
MLG1005S2N7STD25
MLG1005S3N0BTD25
MLG1005S3N0CTD25
MLG1005S3N0STD25
MLG1005S3N3BTD25
MLG1005S3N3CTD25
MLG1005S3N3STD25
MLG1005S3N6BTD25
MLG1005S3N6CTD25
MLG1005S3N6STD25
MLG1005S3N9BTD25
MLG1005S3N9CTD25
MLG1005S3N9STD25
MLG1005S4N3CTD25
MLG1005S4N3STD25
MLG1005S4N7CTD25
MLG1005S4N7STD25
MLG1005S5N1CTD25
MLG1005S5N1STD25
MLG1005S5N6CTD25
MLG1005S5N6STD25
MLG1005S6N2HTD25
MLG1005S6N2STD25
MLG1005S6N8HTD25
MLG1005S6N8JTD25
MLG1005S7N5HTD25
MLG1005S7N5JTD25
MLG1005S8N2HTD25
MLG1005S8N2JTD25
MLG1005S9N1HTD25
MLG1005S9N1JTD25
MLG1005S10NHTD25
MLG1005S10NJTD25
MLG1005S11NHTD25
MLG1005S11NJTD25
MLG1005S12NHTD25
MLG1005S12NJTD25
10.5
10.5
11.3
11.3
13.7
13.7
16.7
16.7
19
9.3
9.3
9.9
9.9
10.8
10.8
12.4
12.4
13.8
13.8
16.2
16.2
11.6
11.6
13.5
13.5
15.1
15.1
18.3
18.3
19
Please contact us for 2% inductance tolerance (code G) products.
○ Measurement equipment
Product No.
Manufacturer
4291B +16193A
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(12/16)
I N D U C T O R S
MLG1005S type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
Q typ.
Part No.*
500MHz
12.6
12.6
14.7
14.7
15.6
15.6
17.7
17.7
19.7
19.7
21.8
21.8
23.8
23.8
27.0
27.0
30.1
30.1
33.5
33.5
36.7
36.7
40.3
40.3
44.3
44.3
50.2
50.2
53.7
53.7
60.9
60.9
67.5
67.5
75.8
75.8
86.5
86.5
96.9
96.9
111.0
111.0
800MHz
13.0
13.0
15.3
15.3
16.2
16.2
18.6
18.6
20.8
20.8
23.3
23.3
25.5
25.5
29.6
29.6
33.5
33.5
37.8
37.8
41.5
41.5
46.9
46.9
51.6
51.6
63.2
63.2
65.6
65.6
80.2
80.2
89.8
89.8
107.5
107.5
135.2
135.2
1.8GHz
18.3
18.3
22.0
22.0
24.1
24.1
29.0
29.0
36.8
36.8
2.0GHz
21.3
21.3
26.0
26.0
2.4GHz
500MHz
20
20
23
23
22
22
23
23
21
21
22
22
22
22
20
20
19
19
23
23
23
23
21
21
21
21
20
20
19
19
18
18
16
16
15
15
13
13
800MHz
24
24
28
28
26
26
28
28
25
25
27
27
26
26
23
23
1.8GHz
25
25
29
29
26
26
26
26
2.0GHz
22
22
26
26
2.4GHz
MLG1005S13NHTD25
MLG1005S13NJTD25
MLG1005S15NHTD25
MLG1005S15NJTD25
MLG1005S16NHTD25
MLG1005S16NJTD25
MLG1005S18NHTD25
MLG1005S18NJTD25
MLG1005S20NHTD25
MLG1005S20NJTD25
MLG1005S22NHTD25
MLG1005S22NJTD25
MLG1005S24NHTD25
MLG1005S24NJTD25
MLG1005S27NHTD25
MLG1005S27NJTD25
MLG1005S30NHTD25
MLG1005S30NJTD25
MLG1005S33NHTD25
MLG1005S33NJTD25
MLG1005S36NHTD25
MLG1005S36NJTD25
MLG1005S39NHTD25
MLG1005S39NJTD25
MLG1005S43NHTD25
MLG1005S43NJTD25
MLG1005S47NHTD25
MLG1005S47NJTD25
MLG1005S51NHTD25
MLG1005S51NJTD25
MLG1005S56NHTD25
MLG1005S56NJTD25
MLG1005S62NHTD25
MLG1005S62NJTD25
MLG1005S68NHTD25
MLG1005S68NJTD25
MLG1005S75NHTD25
MLG1005S75NJTD25
MLG1005S82NHTD25
MLG1005S82NJTD25
MLG1005S91NHTD25
MLG1005S91NJTD25
29.0
29.0
22
22
21
21
21
21
20
20
21
21
20
20
20
20
19
19
19
19
19
19
18
18
17
17
17
17
16
16
15
15
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Please contact us for 2% inductance tolerance (code G) products.
○ Measurement equipment
Product No.
Manufacturer
4291B +16193A
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(13/16)
I N D U C T O R S
MLG1005S type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
Q typ.
Part No.*
500MHz
128.9
128.9
140.8
140.8
175.2
175.2
187.8
187.8
284.7
284.7
800MHz
1.8GHz
2.0GHz
2.4GHz
500MHz
14
14
15
15
12
12
13
13
800MHz
1.8GHz
2.0GHz
2.4GHz
MLG1005SR10HTD25
MLG1005SR10JTD25
MLG1005SR11HTD25
MLG1005SR11JTD25
MLG1005SR12HTD25
MLG1005SR12JTD25
MLG1005SR13HTD25
MLG1005SR13JTD25
MLG1005SR15HTD25
MLG1005SR15JTD25
MLG1005SR16HTD25
MLG1005SR16JTD25
MLG1005SR18HTD25
MLG1005SR18JTD25
MLG1005SR20HTD25
MLG1005SR20JTD25
MLG1005SR22HTD25
MLG1005SR22JTD25
MLG1005SR24HTD25
MLG1005SR24JTD25
MLG1005SR27HTD25
MLG1005SR27JTD25
MLG1005SR30HTD25
MLG1005SR30JTD25
MLG1005SR33HTD25
MLG1005SR33JTD25
MLG1005SR36HTD25
MLG1005SR36JTD25
MLG1005SR39HTD25
MLG1005SR39JTD25
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
11
11
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Please contact us for 2% inductance tolerance (code G) products.
○ Measurement equipment
Product No.
Manufacturer
4291B +16193A
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(14/16)
I N D U C T O R S
MLG1005S type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
1000
R18
R22
82N
R10
R39
47N
R33
22N
68N
56N
39N
R27
33N
27N
R15
R12
18N
15N
100
10
1
10N
12N
8N2
6N8
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1N0
0
10
100
1000
(
)
Frequency MHz
○ Measurement equipment
Product No.
Manufacturer
E4991A +16193A
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(15/16)
I N D U C T O R S
MLG1005S type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
70
1N2
60
50
40
30
20
10
0
1N5
2N2
1N8
2N7
3N9
4N7
3N3
5N6
1N0
6N8
8N2
10N
12N
15N
18N
22N
27N
33N
39N
47N
56N
82N
R10
R15
R18
R33
68N
R12
R27
R22
R39
10
100
1000
(
)
Frequency MHz
○ Measurement equipment
Product No.
E4991A +16193A
Manufacturer
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
(16/16)
I N D U C T O R S
MLG1005S type
PACKAGING STYLE
REEL DIMENSIONS
1.0
+2.0
8.4
–0.0
2.0 0.5
ø13 0.2
ø21 0.8
14.4max.
ø180 2.0
Dimensions in mm
TAPE DIMENSIONS
+0.1
1.5
Sprocket hole
Cavity
–0.0
Type
A
B
K
MLG1005S 1.12 0.1 0.62 0.1 0.8 max.
K
B
4.0 0.1
2.0 0.05
2.0 0.05
200min.
160min.
Taping
300min.
Drawing direction
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20171212 / inductor_automotive_high-frequency_mlg1005s_en.
相关型号：
©2020 ICPDF网 联系我们和版权申明