MMZ1005AFZ750VT000 [TDK]
片式磁珠;型号: | MMZ1005AFZ750VT000 |
厂家: | TDK ELECTRONICS |
描述: | 片式磁珠 |
文件: | 总9页 (文件大小:170K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
E M C C o m p o n e n t s
July 2016
Chip beads
For general signal line
High GHz noise countermeasure (high-speed signal line)
MMZ-V series
MMZ1005-VType
MMZ1005-V
1005[0402 inch]*
* Dimensions code JIS[EIA]
(2/9)
E M C C o m p o n e n t s
Reminders for using these products
Before using these products, be sure to request the delivery specifications.
Safety reminders
Please pay sufficient attention to the warnings for safe designing when using this products.
Reminders
The storage period is less than 12 months.Be sure to follow the storage conditions (temperature:5 to 40°C, humidity:10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(8) Public information-processing equipment
(9) Military equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipmentꢀꢀ
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
20160722 / beads_commercial_signal_mmz1005-v_en.
(3/9)
E M C C o m p o n e n t s
Product compatible with RoHS directive
Halogen-free
Chip beads
For general signal line
Compatible with lead-free solders
High GHz noise countermeasure (high-speed signal line)
Overview of MMZ1005-V type
FEATURES
1005 size noise reduction solution for general signal lines.
Compared to the MMZ-E series, it can attain high impedance at GHz bands.
Exerts an excellent noise reduction effect against noise interfering at several GHz such as LTE or Wi-Fi, or against high-frequency noise.
Achieves particularly high impedances in the range from 0.7GHz to 3GHz , enabling a reduction of noise that could not be reduced
using the conventional MMZ-E series.
Realizes the highest impedance in the industry at 2.5 GHz through the adoption of a newly-developed material (according to research
by TDK in August 2008).
APPLICATION
Ensuring communication sensitivity of wireless communication using high-speed signals such as LTE or Wi-Fi
Noise removal for mobile devices such as smartphones and tablet terminals, and various modules.
Noise removal for PCs and recorders, household appliances such as STBs, smart grids, and industrial equipment.
PART NUMBER CONSTRUCTION
MMZ
1005
AFZ
750
V
T
000
L×W×T dimensions
(mm)
Impedance
() at 100MHz
Characteristic
Series name
Material name
Packaging style
Internal code
type
1005
1.0×0.5x0.5
AFZ
750
151
181
75
150
180
V
T
Taping
000
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature ranges
Package quantity
Individual weight
Operating
temperature
Storage
temperature
Type
(pieces/reel)
(°C)
(°C)
(mg)
MMZ1005-V
–55 to +125
–55 to +125
10,000
1
The storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz1005-v_en.
(4/9)
E M C C o m p o n e n t s
MMZ1005-V type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
30 to 60s
Time
t3
10s
T2
180°C
150°C
230°C
250 to 260°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz1005-v_en.
(5/9)
E M C C o m p o n e n t s
MMZ1005-V type
SHAPE & DIMENSIONS
1±0.05
Dimensions in mm
0.1min.
RECOMMENDED LAND PATTERN
Dimensions in mm
0.5
0.4
0.5
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz1005-v_en.
(6/9)
E M C C o m p o n e n t s
MMZ1005-V type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Impedance
DC resistance
Rated current
Part No.
[100MHz]
()
75
[1GHz]
()
500
[2.5GHz]
()
1400
Tolerance
±25%
Tolerance
±40%
()max.
0.90
(mA)max.
250
MMZ1005AFZ750VT000
MMZ1005AFZ151VT000
MMZ1005AFZ181VT000
150
180
±25%
±25%
1000
1200
±40%
±40%
2500
3000
1.30
1.60
200
150
○ Measurement equipment
Measurement item
Impedance
Product No.
E4991A+16192A
Type-7556
Manufacturer
Keysight Technologies
Yokogawa
DC resistance
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz1005-v_en.
(7/9)
E M C C o m p o n e n t s
MMZ1005-V type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MMZ1005-V series
3500
3000
MMZ1005AFZ181V
2500
2000
MMZ1005AFZ151V
1500
MMZ1005AFZ750V
1000
500
0
1
10
100
1000
)
10000
(
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz1005-v_en.
(8/9)
E M C C o m p o n e n t s
MMZ1005-V type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ1005AFZ750VT000
MMZ1005AFZ151VT000
MMZ1005AFZ181VT000
1600
1400
1200
1000
800
600
400
200
0
3000
2500
2000
1500
1000
500
3500
3000
2500
2000
1500
1000
500
Z
Z
Z
R
R
R
X
X
X
0
0
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz1005-v_en.
(9/9)
E M C C o m p o n e n t s
MMZ1005-V type
PACKAGING STYLE
REEL DIMENSIONS
2.0 0.5
1.0
+2.0
–0.0
8.4
ø13 0.2
ø21 0.8
14.4max.
ø180 2.0
Dimensions in mm
TAPE DIMENSIONS
1.50+0.1
2.0±0.05
4.0±0.1
A
P1
K
Dimensions in mm
K
Type
MMZ1005-V
A
B
P1
2.0±0.05
0.65±0.1
1.15±0.1
0.8max.
160min.
Taping
200min.
300min.
Drawing direction
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz1005-v_en.
相关型号:
©2020 ICPDF网 联系我们和版权申明