MMZ1005D680CTD25 [TDK]
片式磁珠;
| 型号： | MMZ1005D680CTD25 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | 片式磁珠 数据线路滤波器 过滤器 |
| 文件： | 总11页 (文件大小：278K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
E M C C o m p o n e n t s
July 2016
Chip beads
For general signal line
MMZ series (for automobiles)
MMZ1005 Type
MMZ1005
1005[0402 inch]*
* Dimensions code JIS[EIA]
(2/11)
E M C C o m p o n e n t s
Reminders for using these products
Before using these products, be sure to request the delivery specifications.
Safety reminders
Please pay sufficient attention to the warnings for safe designing when using this products.
Reminders
The storage period is less than 12 months.Be sure to follow the storage conditions (temperature:5 to 40°C, humidity:10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(8) Public information-processing equipment
(9) Military equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipmentꢀꢀ
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
20160722 / beads_automotive_signal_mmz1005_en.
(3/11)
E M C C o m p o n e n t s
Product compatible with RoHS directive
Halogen-free
Chip beads
For general signal line
Compatible with lead-free solders
AEC-Q200
Overview of MMZ1005 type
FEATURES
Noise reduction solution for general signal line.
Various frequency characteristics with 5 materials of different features for countermeasures against everything from general signals to
high-speed signals.
APPLICATION
Various ECUs, powertrains, body controls, and car multimedia (telematics).
PART NUMBER CONSTRUCTION
MMZ
1005
S
800
C
T
D25
L×W×T dimensions
(mm)
Impedance
() at 100MHz
Characteristic
Series name
Material name
Packaging style
Internal code
type
1005
1.0×0.5x0.5
B
D
F
S
Y
800
121
80
120
C
T
Taping
D25
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature ranges
Package quantity
Individual weight
Operating
temperature
Storage
temperature
Type
(pieces/reel)
（°C）
（°C）
（mg）
MMZ1005
–55 to +125
–55 to +125
10,000
1
The storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_automotive_signal_mmz1005_en.
(4/11)
E M C C o m p o n e n t s
MMZ1005 type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
30 to 60s
Time
t3
10s
T2
180°C
150°C
230°C
250 to 260°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_automotive_signal_mmz1005_en.
(5/11)
E M C C o m p o n e n t s
MMZ1005 type
MATERIAL CHARACTERISTIC
B material: This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a
frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals.
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in
which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.
Y material: High frequency range type intended for the 100MHz region and above. For signal line applications in which the signal
frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
F material: This new product inherits the characteristic of our D-material, namely its sharp impedance rise time, and its impedance peak
frequency has been shifted higher into range. The product offers excellent noise suppression from 600MHz to as high as in
the GHz range.
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS
2000
D
1800
1600
Y
1400
1200
1000
F
S
800
600
400
200
0
B
10
100
Frequency(MHz)
1000
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_automotive_signal_mmz1005_en.
(6/11)
E M C C o m p o n e n t s
MMZ1005 type
SHAPE & DIMENSIONS
1±0.05
Dimensions in mm
0.1min.
RECOMMENDED LAND PATTERN
Dimensions in mm
0.5
0.4
0.5
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_automotive_signal_mmz1005_en.
(7/11)
E M C C o m p o n e n t s
MMZ1005 type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Impedance
DC resistance
Rated current
Part No.
[100MHz]
()
80
120
600
80
120
240
600
1000
40
Tolerance
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±5
()max.
0.19
0.25
0.85
0.12
0.22
0.28
0.52
0.75
0.10
0.17
0.18
0.26
0.38
0.47
0.54
0.70
1.00
0.85
0.10
0.17
0.24
0.38
0.60
0.90
0.50
0.60
0.70
(mA)max.
450
400
200
500
500
400
300
200
550
450
400
300
250
250
250
200
100
150
500
400
400
400
350
200
200
100
100
MMZ1005B800CTD25
MMZ1005B121CTD25
MMZ1005B601CTD25
MMZ1005S800CTD25
MMZ1005S121CTD25
MMZ1005S241CTD25
MMZ1005S601CTD25
MMZ1005S102CTD25
MMZ1005Y400CTD25
MMZ1005Y800CTD25
MMZ1005Y121CTD25
MMZ1005Y241CTD25
MMZ1005Y301CTD25
MMZ1005Y471CTD25
MMZ1005Y601CTD25
MMZ1005Y102CTD25
MMZ1005Y152CTD25
MMZ1005Y182CTD25
MMZ1005D100CTD25
MMZ1005D220CTD25
MMZ1005D330CTD25
MMZ1005D680CTD25
MMZ1005D121CTD25
MMZ1005D241CTD25
MMZ1005F330CTD25
MMZ1005F470CTD25
MMZ1005F560CTD25
80
120
240
300
470
600
1000
1500
1800
10
22
33
68
120
240
33
47
56
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
○ Measurement equipment
Measurement item
Impedance
Product No.
E4991A+16192A
Type-7556
Manufacturer
Keysight Technologies
Yokogawa
DC resistance
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_automotive_signal_mmz1005_en.
(8/11)
E M C C o m p o n e n t s
MMZ1005 type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MMZ1005B series
MMZ1005S series
MMZ1005Y series
800
1400
1200
1000
800
600
400
200
0
2200
MMZ1005Y182C
2000
1800
1600
1400
1200
1000
800
MMZ1005S102C
700
MMZ1005B601C
MMZ1005Y152C
MMZ1005Y102C
MMZ1005Y601C
MMZ1005Y471C
MMZ1005S601C
600
500
400
300
200
100
0
MMZ1005S241C
MMZ1005S121C
MMZ1005S800C
MMZ1005Y301C
MMZ1005Y241C
MMZ1005Y121C
MMZ1005Y800C
MMZ1005Y400C
600
MMZ1005B121C
400
200
MMZ1005B800C
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
(
Frequency MHz
Frequency MHz
MMZ1005D series
MMZ1005F series
1200
3000
MMZ1005F560C
1000
800
600
400
200
0
2500
MMZ1005D241C
2000
1500
1000
500
0
MMZ1005D121C
MMZ1005F470C
MMZ1005F330C
MMZ1005D680C
MMZ1005D330C
MMZ1005D220C
MMZ1005D100C
1
10
100
1000
( )
Frequency MHz
10000
1
10
100
1000
10000
(
)
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_automotive_signal_mmz1005_en.
(9/11)
E M C C o m p o n e n t s
MMZ1005 type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ1005B800CTD25
MMZ1005B121CTD25
MMZ1005B601CTD25
120
100
80
180
160
140
120
100
80
60
40
20
0
800
700
600
500
400
300
200
100
0
R
R
Z
Z
Z
60
R
40
20
0
X
X
X
1
10
100
1000
)
10000
10000
10000
10000
1
10
100
1000
)
10000
10000
10000
1
10
100
1000
( )
Frequency MHz
10000
10000
10000
10000
(
(
Frequency MHz
Frequency MHz
MMZ1005S800CTD25
MMZ1005S121CTD25
MMZ1005S241CTD25
160
140
120
100
80
60
40
20
0
250
200
150
100
50
400
350
300
250
Z
Z
R
Z
200
R
R
150
100
50
X
X
X
0
0
1
10
100
1000
)
1
10
100
1000
)
1
10
100
1000
( )
Frequency MHz
(
(
Frequency MHz
Frequency MHz
MMZ1005S601CTD25
MMZ1005S102CTD25
MMZ1005Y400CTD25
900
800
700
600
500
400
300
200
100
0
1400
1200
80
70
60
50
40
30
20
10
0
1000
Z
Z
Z
800
R
R
R
600
400
200
0
X
X
X
1
10
100
1000
)
1
10
100
1000
)
1
10
100
1000
( )
Frequency MHz
(
(
Frequency MHz
Frequency MHz
MMZ1005Y800CTD25
MMZ1005Y121CTD25
MMZ1005Y241CTD25
160
140
120
100
80
60
40
20
250
200
150
100
50
500
400
300
200
100
0
Z
Z
Z
R
R
R
X
X
X
0
0
1
10
100
1000
)
1
10
100
1000 10000
1
10
100
1000
(
(
)
(
)
Frequency MHz
Frequency MHz
Frequency MHz
MMZ1005Y301CTD25
MMZ1005Y471CTD25
MMZ1005Y601CTD25
600
500
400
300
200
100
0
800
700
600
500
400
300
200
100
0
1200
1000
800
600
400
200
0
Z
Z
Z
R
R
X
R
X
X
1000
)
1
10
100
10000
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
(
(
Frequency MHz
Frequency MHz
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_automotive_signal_mmz1005_en.
(10/11)
E M C C o m p o n e n t s
MMZ1005 type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ1005Y102CTD25
MMZ1005Y152CTD25
MMZ1005Y182CTD25
1400
1200
1000
1800
1600
1400
1200
1000
800
600
400
200
0
2200
2000
1800
1600
1400
1200
1000
800
600
400
200
0
Z
R
Z
R
800
Z
R
600
400
200
0
X
X
X
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
)
Frequency MHz
1000
10000
(
(
Frequency MHz
Frequency MHz
(
MMZ1005D100CTD25
MMZ1005D220CTD25
MMZ1005D330CTD25
70
60
50
40
30
20
10
0
200
300
250
200
150
100
50
150
100
50
Z
R
X
Z
Z
R
R
X
X
0
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
(
(
Frequency MHz
Frequency MHz
MMZ1005D680CTD25
MMZ1005D121CTD25
MMZ1005D241CTD25
600
500
400
300
200
100
0
1000
800
600
400
200
0
3000
2500
2000
1500
1000
500
Z
R
Z
Z
R
X
1000
)
X
X
R
10000
0
1
10
100
10000
1
10
100
1000
)
1
10
100
1000
( )
Frequency MHz
10000
(
Frequency MHz
(
Frequency MHz
MMZ1005F330CTD25
MMZ1005F470CTD25
MMZ1005F560CTD25
700
600
500
400
300
200
100
0
1000
900
800
700
600
500
400
300
200
100
0
1200
1000
800
600
400
200
0
Z
Z
Z
X
R
X
1000
)
R
R
X
1
10
100
10000
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
(
Frequency MHz
(
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_automotive_signal_mmz1005_en.
(11/11)
E M C C o m p o n e n t s
MMZ1005 type
PACKAGING STYLE
REEL DIMENSIONS
2.0 0.5
1.0
+2.0
–0.0
8.4
ø13 0.2
ø21 0.8
14.4max.
ø180 2.0
Dimensions in mm
TAPE DIMENSIONS
1.50+0.1
2.0±0.05
4.0±0.1
A
P1
K
Dimensions in mm
K
Type
MMZ1005
A
B
P1
2.0±0.05
0.65±0.1
1.15±0.1
0.8max.
160min.
Taping
200min.
300min.
Drawing direction
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_automotive_signal_mmz1005_en.
相关型号：
MMZ1005F121ET000
Ferrite Chip, 1 Function(s), 0.2A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 1005, 2 PIN
TDK
©2020 ICPDF网 联系我们和版权申明