MMZ1608Y152CTA00 [TDK]

Ferrite Chip, 1 Function(s), 0.3A,;
MMZ1608Y152CTA00
型号: MMZ1608Y152CTA00
厂家: TDK ELECTRONICS    TDK ELECTRONICS
描述:

Ferrite Chip, 1 Function(s), 0.3A,

文件: 总14页 (文件大小:437K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
E M C C o m p o n e n t s  
July 2016  
Chip beads  
For general signal line  
MMZ series  
MMZ1608Type  
MMZ1608  
1608[0603 inch]*  
* Dimensions code JIS[EIA]  
(2/14)  
E M C C o m p o n e n t s  
Reminders for using these products  
Before using these products, be sure to request the delivery specifications.  
Safety reminders  
Please pay sufficient attention to the warnings for safe designing when using this products.  
Reminders  
The storage period is less than 12 months.Be sure to follow the storage conditions (temperature:5 to 40°C, humidity:10 to 75% RH or  
less).  
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.  
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).  
Before soldering, be sure to preheat components.  
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature  
does not exceed 150°C.  
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.  
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.  
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to  
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.  
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal  
design.  
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.  
A malfunction may occur due to magnetic interference.  
Use a wrist band to discharge static electricity in your body through the grounding wire.  
Do not expose the products to magnets or magnetic fields.  
Do not use for a purpose outside of the contents regulated in the delivery specifications.  
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-  
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-  
ment, industrial robots) under a normal operation and use condition.  
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-  
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,  
person or property.  
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions  
set forth in the each catalog, please contact us.  
(1) Aerospace/aviation equipment  
(8) Public information-processing equipment  
(9) Military equipment  
(2) Transportation equipment (cars, electric trains, ships, etc.)  
(3) Medical equipment  
(10) Electric heating apparatus, burning equipment  
(11) Disaster prevention/crime prevention equipment  
(12) Safety equipment  
(4) Power-generation control equipment  
(5) Atomic energy-related equipmentꢀꢀ  
(6) Seabed equipment  
(13) Other applications that are not considered general-purpose  
applications  
(7) Transportation control equipment  
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-  
tection circuit/device or providing backup circuits in your equipment.  
20160722 / beads_commercial_signal_mmz1608_en.
(3/14)  
E M C C o m p o n e n t s  
Product compatible with RoHS directive  
Halogen-free  
Chip beads  
For general signal line  
Compatible with lead-free solders  
Overview of MMZ1608 type  
FEATURES  
Noise reduction solution for general signal line.  
Various frequency characteristics with 8 materials of different features for countermeasures against everything from general signals to  
high-speed signals.  
APPLICATION  
Noise removal for mobile devices such as smartphones and tablet terminals, and various modules.  
Noise removal for PCs and recorders, household appliances such as STBs, smart grids, and industrial equipment.  
PART NUMBER CONSTRUCTION  
MMZ  
1608  
S
121  
A
T
A00  
L×W×T dimensions  
(mm)  
Impedance  
() at 100MHz  
Characteristic  
Series name  
Material name  
Packaging style  
Internal code  
type  
C
A
1.6×0.8x0.6  
1608  
A
B
D
F
121  
120  
T
Taping  
A00  
AH0  
1.6×0.8x0.8  
B
Q
R
S
Y
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT  
Temperature ranges  
Package quantity  
Individual weight  
Operating  
temperature  
Storage  
temperature  
Type  
(pieces/reel)  
4,000  
°C)  
°C)  
mg)  
t=0.6mm  
t=0.8mm  
–55 to +125  
–55 to +125  
–55 to +125  
–55 to +125  
3
4
MMZ1608  
4,000  
  
The storage temperature range is for after the circuit board is mounted.  
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html  
Halogen-free: indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.
(4/14)  
E M C C o m p o n e n t s  
MMZ1608 type  
RECOMMENDED REFLOW PROFILE  
Preheating  
Soldering  
Natural  
cooling  
Peak  
T4  
T3  
T3  
T2  
t3  
t2  
T1  
t1  
t: Time  
Preheating  
Temp.  
T1  
Soldering  
Temp.  
T3  
Peak  
Temp.  
T4  
Time  
t1  
60 to 120s  
Time  
t2  
30 to 60s  
Time  
t3  
10s  
T2  
180°C  
150°C  
230°C  
250 to 260°C  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.
(5/14)  
E M C C o m p o n e n t s  
MMZ1608 type  
MATERIAL CHARACTERISTIC  
B material: This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a  
frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals.  
R material: For wide frequency applications calling for broad impedance characteristics. For digital signal line applications calling  
requiring good waveform integrity. Impedance values selected for effectiveness at 10 to 200MHz.  
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in  
which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.  
Y material: High frequency range type intended for the 100MHz region and above. For signal line applications in which the signal  
frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz.  
A material: This high-impedance product is based on the impedance frequency characteristics of our Y-material. The product offers  
excellent impedance characteristics, which is greater than 2500, in the vicinity of 100MHz range (MMZ1608A252B).  
Q material: High frequency range type intended for the 100MHz region and above. Impedance values selected for effectiveness at 100 to  
800MHz.  
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.  
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.  
F material: This new product inherits the characteristic of our D-material, namely its sharp impedance rise time, and its impedance peak  
frequency has been shifted higher into range. The product offers excellent noise suppression from 600MHz to as high as in  
the GHz range.  
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS  
2500  
A
D
F
2000  
Y
Q
1500  
1000  
S
R
500  
B
0
10  
100  
1000  
Frequency(MHz)  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.
(6/14)  
E M C C o m p o n e n t s  
MMZ1608 type  
SHAPE & DIMENSIONS  
1.6±0.15  
( )  
Thickness T  
0.6 0.15mm  
0.8 0.15mm  
Dimensions in mm  
0.3±0.2  
RECOMMENDED LAND PATTERN  
0.6  
0.8  
0.6  
Dimensions in mm  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.
(7/14)  
E M C C o m p o n e n t s  
MMZ1608 type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
Impedance  
DC resistance  
Rated current  
Thickness T  
Part No.  
[100MHz]  
()  
Tolerance  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
()max.  
0.15  
0.25  
0.25  
0.30  
0.40  
0.60  
0.05  
0.05  
0.10  
0.18  
0.25  
0.30  
0.40  
0.50  
0.10  
0.15  
0.15  
0.20  
0.20  
0.30  
0.30  
0.35  
0.50  
0.90  
0.05  
0.05  
0.15  
0.20  
0.30  
0.30  
0.35  
0.40  
0.45  
0.50  
0.60  
0.80  
0.80  
0.80  
0.30  
0.40  
0.50  
0.70  
0.80  
1.00  
(mA)max.  
600  
500  
500  
500  
500  
300  
1500  
1500  
800  
500  
500  
500  
500  
400  
600  
500  
500  
500  
500  
500  
500  
500  
400  
200  
1500  
1500  
500  
500  
500  
500  
500  
500  
500  
400  
300  
200  
200  
200  
500  
500  
400  
300  
200  
200  
(mm)  
0.6  
0.6  
0.6  
0.6  
0.6  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
120  
220  
300  
470  
600  
1000  
15  
MMZ1608B121CTAH0  
MMZ1608B221CTAH0  
MMZ1608B301CTAH0  
MMZ1608B471CTAH0  
MMZ1608B601CTAH0  
MMZ1608B102CTA00  
MMZ1608R150ATA00  
MMZ1608R300ATA00  
MMZ1608R600ATA00  
MMZ1608R121ATA00  
MMZ1608R301ATA00  
MMZ1608R471ATA00  
MMZ1608R601ATA00  
MMZ1608R102ATA00  
MMZ1608S400ATA00  
MMZ1608S800ATA00  
MMZ1608S121ATA00  
MMZ1608S181ATA00  
MMZ1608S221ATA00  
MMZ1608S301ATA00  
MMZ1608S471ATA00  
MMZ1608S601ATA00  
MMZ1608S102ATA00  
MMZ1608S202ATA00  
MMZ1608Y150BTA00  
MMZ1608Y300BTA00  
MMZ1608Y600BTA00  
MMZ1608Y121BTA00  
MMZ1608Y221BTA00  
MMZ1608Y301BTA00  
MMZ1608Y471BTA00  
MMZ1608Y601BTA00  
MMZ1608Y751BTA00  
MMZ1608Y102BTA00  
MMZ1608Y152BTA00  
MMZ1608A182BTA00  
MMZ1608A222BTA00  
MMZ1608A252BTA00  
MMZ1608Q121BTA00  
MMZ1608Q221BTA00  
MMZ1608Q331BTA00  
MMZ1608Q471BTA00  
MMZ1608Q601BTA00  
MMZ1608Q102BTA00  
30  
60  
120  
300  
470  
600  
1000  
40  
80  
120  
180  
220  
300  
470  
600  
1000  
2000  
15  
30  
60  
120  
220  
300  
470  
600  
750  
1000  
1500  
1800  
2200  
2500  
120  
220  
330  
470  
600  
1000  
Measurement equipment  
Measurement item  
Impedance  
Product No.  
E4991A+16192A  
Type-7556  
Manufacturer  
Keysight Technologies  
Yokogawa  
DC resistance  
Equivalent measurement equipment may be used.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.
(8/14)  
E M C C o m p o n e n t s  
MMZ1608 type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
Impedance  
DC resistance  
Rated current  
Thickness T  
Part No.  
[100MHz]  
()  
5
10  
22  
50  
80  
80  
120  
120  
240  
300  
3typ.  
47  
Tolerance  
±2  
±5  
()max.  
0.05  
0.10  
0.20  
0.25  
0.30  
0.30  
0.30  
0.30  
0.60  
0.70  
0.05  
0.40  
0.55  
0.75  
(mA)max.  
700  
500  
500  
500  
500  
500  
400  
400  
300  
300  
700  
500  
300  
200  
(mm)  
0.8  
0.6  
0.6  
0.6  
0.6  
0.8  
0.6  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
0.8  
MMZ1608D050CTA00  
MMZ1608D100CTAH0  
MMZ1608D220CTAH0  
MMZ1608D500CTAH0  
MMZ1608D800CTAH0  
MMZ1608D800BTA00  
MMZ1608D121CTAH0  
MMZ1608D121BTA00  
MMZ1608D241CTA00  
MMZ1608D301BTA00  
MMZ1608F030BTA00  
MMZ1608F470BTA00  
MMZ1608F750BTA00  
MMZ1608F121BTA00  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
±25%  
75  
120  
Measurement equipment  
Measurement item  
Impedance  
Product No.  
E4991A+16192A  
Type-7556  
Manufacturer  
Keysight Technologies  
Yokogawa  
DC resistance  
Equivalent measurement equipment may be used.  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.
(9/14)  
E M C C o m p o n e n t s  
MMZ1608 type  
ELECTRICAL CHARACTERISTICS  
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)  
MMZ1608B series  
MMZ1608R series  
MMZ1608S series  
1200  
1200  
1100  
1000  
900  
800  
700  
600  
500  
400  
300  
200  
100  
0
3000  
MMZ1608S202A  
MMZ1608S301A  
MMZ1608B102C  
MMZ1608B601C  
MMZ1608B301C  
MMZ1608R102A  
MMZ1608R601A  
MMZ1608S102A  
1100  
1000  
900  
800  
700  
600  
500  
400  
300  
200  
100  
0
MMZ1608B471C  
MMZ1608S601A  
MMZ1608R600A  
MMZ1608R300A  
2500  
MMZ1608S221A  
MMZ1608S181A  
MMZ1608R471A  
MMZ1608S471A  
MMZ1608R301A  
MMZ1608R121A  
MMZ1608S121A  
MMZ1608S800A  
2000  
MMZ1608R150A  
MMZ1608S400A  
1500  
1000  
500  
0
MMZ1608B221C  
MMZ1608B121C  
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
(
(
Frequency MHz  
Frequency MHz  
MMZ1608Y series  
MMZ1608A series  
MMZ1608Q series  
1800  
3000  
2000  
MMZ1608Q102B  
MMZ1608Y152B  
1800  
1600  
1400  
1200  
1000  
800  
600  
400  
200  
0
1600  
1400  
1200  
1000  
800  
600  
400  
200  
0
MMZ1608Q601B  
MMZ1608Q471B  
MMZ1608Y601B  
MMZ1608Y471B  
MMZ1608Y102B  
MMZ1608Y751B  
MMZ1608A222B  
2500  
MMZ1608A252B  
MMZ1608Y301B  
MMZ1608Y221B  
MMZ1608Y121B  
MMZ1608A182B  
2000  
MMZ1608Q331B  
MMZ1608Q221B  
MMZ1608Q121B  
MMZ1608Y600B  
MMZ1608Y300B  
1500  
1000  
500  
0
MMZ1608Y150B  
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
10000  
(
(
Frequency MHz  
Frequency MHz  
(
)
Frequency MHz  
MMZ1608D series  
MMZ1608F series  
6000  
5500  
5000  
4500  
3000  
MMZ1608D301B  
2500  
MMZ1608D121C  
MMZ1608D241C  
MMZ1608D121B  
MMZ1608D800C  
MMZ1608D800B  
MMZ1608D500C  
MMZ1608D220C  
MMZ1608D100C  
MMZ1608D050C  
MMZ1608F121B  
4000  
3500  
3000  
2500  
2000  
1500  
1000  
500  
2000  
1500  
1000  
500  
0
MMZ1608F750B  
MMZ1608F470B  
MMZ1608F030B  
0
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
10000  
(
Frequency MHz  
(
)
Frequency MHz  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.
(10/14)  
E M C C o m p o n e n t s  
MMZ1608 type  
ELECTRICAL CHARACTERISTICS  
Z, X, R VS. FREQUENCY CHARACTERISTICS  
MMZ1608B121CTAH0  
MMZ1608B221CTAH0  
MMZ1608B301CTAH0  
160  
140  
120  
100  
80  
60  
40  
20  
0
300  
250  
200  
150  
100  
50  
350  
300  
Z
250  
200  
150  
100  
50  
Z
Z
R
R
R
X
X
X
0
0
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
)
10000  
10000  
10000  
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
(
(
Frequency MHz  
Frequency MHz  
MMZ1608B471CTAH0  
MMZ1608B601CTAH0  
MMZ1608B102CTA00  
600  
500  
700  
600  
1200  
1000  
Z
500  
400  
300  
200  
100  
0
Z
400  
300  
800  
Z
R
600  
R
R
200  
400  
X
X
100  
0
200  
X
0
1
10  
100  
1000  
)
10  
100  
1000  
)
10000  
10  
100  
1000  
)
10000  
(
(
(
Frequency MHz  
Frequency MHz  
Frequency MHz  
MMZ1608R150ATA00  
MMZ1608R300ATA00  
MMZ1608R600ATA00  
20  
40  
35  
30  
25  
20  
15  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
15  
Z
R
Z
Z
10  
R
R
X
(
5
10  
5
X
X
0
0
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
( )  
Frequency MHz  
1
10  
100  
1000  
)
10000  
(
Frequency MHz  
Frequency MHz  
MMZ1608R121ATA00  
MMZ1608R301ATA00  
MMZ1608R471ATA00  
140  
120  
100  
350  
300  
250  
600  
500  
400  
Z
Z
Z
80  
200  
300  
R
R
R
60  
150  
200  
100  
0
40  
20  
0
100  
50  
0
X
X
X
1
10  
100  
1000  
10000  
1
10  
100  
1000  
10000  
10  
100  
1000  
10000  
(
)
(
)
(
)
Frequency MHz  
Frequency MHz  
Frequency MHz  
MMZ1608R601ATA00  
MMZ1608R102ATA00  
MMZ1608S400ATA00  
700  
600  
500  
1200  
1000  
60  
50  
40  
800  
600  
400  
200  
0
Z
Z
400  
Z
30  
R
R
300  
R
20  
200  
100  
0
X
10  
0
X
X
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
1
10  
100  
1000  
)
10000  
(
(
Frequency MHz  
Frequency MHz  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.
(11/14)  
E M C C o m p o n e n t s  
MMZ1608 type  
ELECTRICAL CHARACTERISTICS  
Z, X, R VS. FREQUENCY CHARACTERISTICS  
MMZ1608S800ATA00  
MMZ1608S121ATA00  
MMZ1608S181ATA00  
120  
100  
180  
160  
140  
120  
100  
80  
60  
40  
20  
0
300  
250  
80  
200  
Z
Z
R
Z
60  
40  
20  
0
150  
R
R
100  
50  
0
X
X
X
1
10  
100  
1000  
)
10000  
10000  
10000  
10000  
10000  
1
10  
100  
1000  
)
10000  
10  
100  
1000  
)
10000  
10000  
10000  
10000  
10000  
(
(
(
Frequency MHz  
Frequency MHz  
Frequency MHz  
MMZ1608S221ATA00  
MMZ1608S301ATA00  
MMZ1608S471ATA00  
300  
450  
400  
350  
600  
500  
400  
250  
200  
300  
250  
Z
Z
R
Z
150  
300  
R
200  
150  
100  
50  
R
100  
50  
0
200  
100  
0
X
X
X
0
1
10  
100  
1000  
)
1
10  
100  
1000  
( )  
Frequency MHz  
1
10  
100  
1000  
)
10000  
10000  
10000  
10000  
(
(
Frequency MHz  
Frequency MHz  
MMZ1608S601ATA00  
MMZ1608S102ATA00  
MMZ1608S202ATA00  
700  
600  
1400  
1200  
1000  
3000  
2500  
2000  
500  
Z
Z
Z
400  
800  
R
1500  
1000  
500  
0
R
R
300  
200  
100  
0
600  
400  
200  
0
X
X
X
1
10  
100  
1000  
)
1
10  
100  
1000  
)
1
10  
100  
1000  
)
(
(
(
Frequency MHz  
Frequency MHz  
Frequency MHz  
MMZ1608Y150BTA00  
MMZ1608Y300BTA00  
MMZ1608Y600BTA00  
25  
60  
50  
40  
30  
20  
10  
0
120  
100  
80  
60  
40  
20  
0
20  
15  
10  
Z
Z
Z
R
R
R
X
X
X
5
0
1
10  
100  
1000  
)
1
10  
100  
1000  
)
1
10  
100  
1000  
( )  
Frequency MHz  
(
(
Frequency MHz  
Frequency MHz  
MMZ1608Y121BTA00  
MMZ1608Y221BTA00  
MMZ1608Y301BTA00  
250  
200  
150  
100  
50  
400  
350  
300  
250  
200  
150  
100  
50  
600  
500  
400  
300  
200  
100  
0
Z
Z
Z
R
R
R
X
X
X
0
0
1
10  
100  
1000  
)
1
10  
100  
1000  
)
1
10  
100  
1000  
)
(
(
(
Frequency MHz  
Frequency MHz  
Frequency MHz  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.
(12/14)  
E M C C o m p o n e n t s  
MMZ1608 type  
ELECTRICAL CHARACTERISTICS  
Z, X, R VS. FREQUENCY CHARACTERISTICS  
MMZ1608Y471BTA00  
MMZ1608Y601BTA00  
MMZ1608Y751BTA00  
700  
600  
500  
900  
800  
700  
600  
500  
400  
300  
200  
100  
0
1000  
800  
Z
Z
600  
400  
R
Z
R
R
300  
200  
100  
0
400  
200  
0
X
X
X
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
)
10000  
10000  
10000  
10000  
10000  
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
(
(
Frequency MHz  
Frequency MHz  
MMZ1608Y102BTA00  
MMZ1608Y152BTA00  
1800  
1600  
1400  
1400  
1200  
1000  
800  
1200  
1000  
800  
600  
400  
200  
0
Z
R
R
Z
600  
400  
200  
0
X
X
1
10  
100  
1000  
)
1
10  
100  
1000  
)
10000  
10000  
10000  
10000  
(
(
Frequency MHz  
Frequency MHz  
MMZ1608A182BTA00  
MMZ1608A222BTA00  
MMZ1608A252BTA00  
2000  
2500  
2000  
1500  
1000  
3000  
2500  
2000  
1500  
1000  
1500  
Z
R
Z
1000  
500  
0
Z
500  
X
500  
X
R
R
X
0
0
1
10  
100  
1000  
)
1
10  
100  
1000  
)
1
10  
100  
1000  
)
10000  
10000  
10000  
(
(
(
Frequency MHz  
Frequency MHz  
Frequency MHz  
MMZ1608Q121BTA00  
MMZ1608Q221BTA00  
MMZ1608Q331BTA00  
350  
300  
250  
200  
150  
100  
50  
600  
500  
400  
300  
200  
100  
0
800  
700  
600  
500  
400  
300  
200  
100  
0
Z
Z
Z
R
R
X
X
X
R
0
1
10  
100  
1000  
)
1
10  
100  
1000  
)
1
10  
100  
1000  
( )  
Frequency MHz  
(
(
Frequency MHz  
Frequency MHz  
MMZ1608Q471BTA00  
MMZ1608Q601BTA00  
MMZ1608Q102BTA00  
1200  
1000  
800  
600  
400  
200  
0
1400  
1200  
1000  
800  
2000  
1500  
1000  
500  
Z
600  
Z
Z
400  
200  
R
R
X
X
R
X
0
0
1
10  
100  
1000  
1
10  
100  
1000  
1
10  
100  
1000  
(
)
(
)
(
)
Frequency MHz  
Frequency MHz  
Frequency MHz  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.
(13/14)  
E M C C o m p o n e n t s  
MMZ1608 type  
ELECTRICAL CHARACTERISTICS  
Z, X, R VS. FREQUENCY CHARACTERISTICS  
MMZ1608D050CTA00  
MMZ1608D100CTAH0  
MMZ1608D220CTAH0  
30  
25  
20  
15  
10  
5
80  
70  
60  
50  
40  
30  
20  
10  
0
160  
140  
120  
100  
80  
60  
40  
20  
0
Z
Z
R
Z
X
X
X
R
R
0
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
1
10  
100  
1000  
)
10000  
10000  
10000  
1
10  
100  
1000  
10000  
(
(
)
Frequency MHz  
Frequency MHz  
MMZ1608D500CTAH0  
MMZ1608D800CTAH0  
MMZ1608D800BTA00  
400  
600  
500  
400  
300  
200  
100  
0
600  
500  
400  
300  
200  
100  
0
300  
200  
100  
0
Z
R
Z
R
Z
X
X
X
R
1
10  
100  
1000  
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
1
10  
100  
1000  
)
10000  
(
)
(
Frequency MHz  
Frequency MHz  
MMZ1608D121CTAH0  
MMZ1608D121BTA00  
MMZ1608D241CTA00  
800  
700  
600  
500  
400  
300  
200  
100  
0
800  
700  
600  
500  
400  
300  
200  
100  
0
1200  
1000  
800  
600  
400  
200  
0
Z
Z
Z
X
R
X
R
X
R
1
10  
100  
1000  
)
10000  
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
1
10  
100  
1000  
)
(
(
Frequency MHz  
Frequency MHz  
MMZ1608D301BTA00  
MMZ1608F030BTA00  
MMZ1608F470BTA00  
3000  
2500  
2000  
1500  
1000  
500  
35  
30  
25  
20  
15  
10  
5
900  
800  
700  
600  
500  
400  
300  
200  
100  
0
Z
X
Z
Z
R
R
X
X
R
100  
0
0
1
10  
1000  
)
10000  
1
10  
100  
1000  
10000  
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
(
(
)
Frequency MHz  
Frequency MHz  
MMZ1608F750BTA00  
MMZ1608F121BTA00  
2000  
6000  
5000  
4000  
3000  
2000  
1000  
0
1500  
1000  
500  
0
Z
Z
R
X
R
X
1000  
)
1
10  
100  
10000  
1
10  
100  
1000  
( )  
Frequency MHz  
10000  
(
Frequency MHz  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.
(14/14)  
E M C C o m p o n e n t s  
MMZ1608 type  
PACKAGING STYLE  
REEL DIMENSIONS  
2.0 0.5  
1.0  
+2.0  
–0.0  
8.4  
ø13 0.2  
ø21 0.8  
14.4max.  
ø180 2.0  
Dimensions in mm  
TAPE DIMENSIONS  
2.0±0.05  
4.0±0.1  
1.50+0.1  
A
4.0±0.1  
K
Dimensions in mm  
K
Type  
MMZ1608  
A
1.1±0.2  
B
P1  
4.0±0.1  
1.9±0.2  
1.1max.  
160min.  
Taping  
200min.  
300min.  
Drawing direction  
Dimensions in mm  
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.  
Please note that the contents may change without any prior notice due to reasons such as upgrading.  
20160722 / beads_commercial_signal_mmz1608_en.

相关型号:

MMZ1608Y221B

Chip Beads(SMD) For Signal Line
TDK

MMZ1608Y221BT

Ferrite Chip, 1 Function(s), 0.5A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0603, 2 PIN
TDK

MMZ1608Y221BTA00

FERRITE BEAD 220 OHM 0603 1LN
TDK

MMZ1608Y221BTD25

片式磁珠
TDK

MMZ1608Y300B

Chip Beads(SMD) For Signal Line
TDK

MMZ1608Y300BT

Ferrite Chip, 1 Function(s), 1.5A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0603, 2 PIN
TDK

MMZ1608Y300BTA00

Ferrite Chip, 1 Function(s), 1.5A,
TDK

MMZ1608Y300BTD25

Ferrite Chip, 1 Function(s), 1.5A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0603, 2 PIN
TDK

MMZ1608Y301B

Chip Beads(SMD) For Signal Line
TDK

MMZ1608Y301BT

Ferrite Chip, 1 Function(s), 0.5A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0603, 2 PIN
TDK

MMZ1608Y301BTA00

Ferrite Chip, 1 Function(s), 0.5A,
TDK

MMZ1608Y301BTD25

Ferrite Chip, 1 Function(s), 0.5A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0603, 2 PIN
TDK