MMZ2012R102AT000 [TDK]
Ferrite Chip, 1 Function(s), 0.5A,;型号: | MMZ2012R102AT000 |
厂家: | TDK ELECTRONICS |
描述: | Ferrite Chip, 1 Function(s), 0.5A, PC |
文件: | 总11页 (文件大小:271K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
E M C C o m p o n e n t s
July 2016
Chip beads
For general signal line
MMZ series
MMZ2012Type
MMZ2012
2012[0805 inch]*
* Dimensions code JIS[EIA]
(2/11)
E M C C o m p o n e n t s
Reminders for using these products
Before using these products, be sure to request the delivery specifications.
Safety reminders
Please pay sufficient attention to the warnings for safe designing when using this products.
Reminders
The storage period is less than 12 months.Be sure to follow the storage conditions (temperature:5 to 40°C, humidity:10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(8) Public information-processing equipment
(9) Military equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipmentꢀꢀ
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
20160722 / beads_commercial_signal_mmz2012_en.
(3/11)
E M C C o m p o n e n t s
Product compatible with RoHS directive
Halogen-free
Chip beads
For general signal line
Compatible with lead-free solders
Overview of MMZ2012 type
FEATURES
Noise reduction solution for general signal line.
Various frequency characteristics with 4 materials of different features for countermeasures against everything from general signals to
high-speed signals.
APPLICATION
Noise removal for mobile devices such as smartphones and tablet terminals, and various modules.
Noise removal for PCs and recorders, household appliances such as STBs, smart grids, and industrial equipment.
PART NUMBER CONSTRUCTION
MMZ
2012
R
150
A
T
000
L×W×T dimensions
(mm)
Impedance
() at 100MHz
Characteristic
Series name
Material name
Packaging style
Internal code
type
A
B
2012
2.0×1.25x0.85
D
R
S
Y
121
150
120
15
T
Taping
000
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature ranges
Package quantity
Individual weight
Operating
temperature
Storage
temperature
Type
(pieces/reel)
(°C)
(°C)
(mg)
MMZ2012
–55 to +125
–55 to +125
4,000
8
The storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz2012_en.
(4/11)
E M C C o m p o n e n t s
MMZ2012 type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
30 to 60s
Time
t3
10s
T2
180°C
150°C
230°C
250 to 260°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz2012_en.
(5/11)
E M C C o m p o n e n t s
MMZ2012 type
MATERIAL CHARACTERISTIC
R material: for wide frequency applications calling for broad impedance characteristics. For digital signal line applications calling requiring
good waveform integrity. Impedance values selected for effectiveness at 10 to 200MHz.
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in
which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.
Y material: High frequency range type intended for the 100MHz region and above. For signal line applications in which the signal
frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS
2500
2000
Y
1500
1000
D
S
R
500
0
10
100
1000
Frequency(MHz)
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz2012_en.
(6/11)
E M C C o m p o n e n t s
MMZ2012 type
SHAPE & DIMENSIONS
2±0.2
Dimensions in mm
0.5±0.3
RECOMMENDED LAND PATTERN
0.8
1
0.8
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz2012_en.
(7/11)
E M C C o m p o n e n t s
MMZ2012 type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Impedance
DC resistance
Rated current
Part No.
[100MHz]
()
15
30
60
120
300
600
1000
40
Tolerance
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
()max.
0.05
0.05
0.10
0.12
0.15
0.20
0.30
0.10
0.10
0.15
0.15
0.20
0.30
0.35
0.05
0.05
0.10
0.12
0.15
0.20
0.30
0.40
0.50
0.30
0.30
0.50
(mA)max.
1500
1500
1000
800
600
500
500
1000
800
MMZ2012R150AT000
MMZ2012R300AT000
MMZ2012R600AT000
MMZ2012R121AT000
MMZ2012R301AT000
MMZ2012R601AT000
MMZ2012R102AT000
MMZ2012S400AT000
MMZ2012S800AT000
MMZ2012S121AT000
MMZ2012S181AT000
MMZ2012S301AT000
MMZ2012S601AT000
MMZ2012S102AT000
MMZ2012Y150BT000
MMZ2012Y300BT000
MMZ2012Y600BT000
MMZ2012Y121BT000
MMZ2012Y301BT000
MMZ2012Y601BT000
MMZ2012Y102BT000
MMZ2012Y152BT000
MMZ2012Y202BT000
MMZ2012D800BT000
MMZ2012D121BT000
MMZ2012D301BT000
80
120
180
300
600
1000
15
800
600
600
500
500
1500
1500
1000
800
600
500
500
500
400
500
30
60
120
300
600
1000
1500
2000
80
120
300
500
400
○ Measurement equipment
Measurement item
Impedance
Product No.
E4991A+16192A
Type-7556
Manufacturer
Keysight Technologies
Yokogawa
DC resistance
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz2012_en.
(8/11)
E M C C o m p o n e n t s
MMZ2012 type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MMZ2012R series
MMZ2012S series
MMZ2012Y series
1200
1100
1000
900
800
700
600
500
400
300
200
100
0
2500
1200
MMZ2012S102A
MMZ2012R102A
MMZ2012R121A
MMZ2012Y202B
1100
MMZ2012S121A
MMZ2012S800A
MMZ2012S400A
MMZ2012R601A
1000
MMZ2012S601A
2000
MMZ2012R301A
MMZ2012Y152B
MMZ2012Y600B
MMZ2012R600A
900
800
700
600
500
400
300
200
100
0
MMZ2012Y102B
MMZ2012S301A
MMZ2012S181A
MMZ2012Y300B
MMZ2012R300A
MMZ2012Y150B
1500
MMZ2012Y601B
MMZ2012Y301B
MMZ2012Y121B
MMZ2012R150A
1000
500
0
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
1
10
100
1000
)
10000
(
Frequency MHz
(
Frequency MHz
MMZ2012D series
4500
4000
MMZ2012D301B
3500
3000
2500
2000
1500
1000
500
MMZ2012D121B
MMZ2012D800B
0
1
10
100
1000
10000
(
)
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz2012_en.
(9/11)
E M C C o m p o n e n t s
MMZ2012 type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ2012R150AT000
MMZ2012R300AT000
MMZ2012R600AT000
25
20
40
35
30
25
20
15
10
5
90
80
70
60
50
40
30
20
10
0
15
Z
Z
Z
R
R
R
10
5
X
X
X
0
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
10000
(
(
(
)
Frequency MHz
Frequency MHz
Frequency MHz
MMZ2012R121AT000
MMZ2012R301AT000
MMZ2012R601AT000
140
120
100
350
300
250
700
600
500
Z
Z
80
60
40
20
0
200
400
Z
R
R
R
300
150
200
100
0
100
50
0
X
X
X
1
10
100
1000
)
10000
1
10
100
1000
)
10000
10000
10000
10000
1
10
100
1000
( )
Frequency MHz
10000
10000
10000
(
(
Frequency MHz
Frequency MHz
MMZ2012R102AT000
MMZ2012S400AT000
MMZ2012S800AT000
1200
1000
60
50
140
120
100
800
600
400
200
0
40
Z
Z
Z
R
80
R
R
30
20
10
0
60
40
20
0
X
X
X
1
10
100
1000
)
1
10
100
1000
( )
Frequency MHz
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
MMZ2012S121AT000
MMZ2012S181AT000
MMZ2012S301AT000
180
160
140
300
250
200
450
400
350
300
120
100
Z
250
200
150
Z
R
R
80
60
40
20
0
Z
R
100
50
0
150
100
50
X
X
X
0
1
10
100
1000
)
10000
1
10
100
1000
)
1
10
100
1000
)
(
(
(
Frequency MHz
Frequency MHz
Frequency MHz
MMZ2012S601AT000
MMZ2012S102AT000
MMZ2012Y150BT000
700
600
500
1200
1000
800
30
25
20
15
10
5
Z
Z
Z
400
R
R
600
400
200
0
R
300
200
100
0
X
X
X
0
1
10
100
1000
10000
1
10
100
1000
1
10
100
1000
10000
(
)
(
)
(
)
Frequency MHz
Frequency MHz
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz2012_en.
(10/11)
E M C C o m p o n e n t s
MMZ2012 type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ2012Y300BT000
MMZ2012Y600BT000
MMZ2012Y121BT000
50
40
30
20
10
0
120
100
80
60
40
20
0
200
150
100
50
Z
Z
Z
R
R
R
X
X
X
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
10000
10000
10000
1
10
100
1000
( )
Frequency MHz
10000
10000
10000
(
(
Frequency MHz
Frequency MHz
MMZ2012Y301BT000
MMZ2012Y601BT000
MMZ2012Y102BT000
600
800
700
600
500
1200
1000
500
400
800
Z
Z
R
R
Z
R
400
600
300
300
200
100
0
400
200
0
200
X
X
X
100
0
1
10
100
1000
)
1
10
100
1000
)
1
10
100
1000
)
10000
10000
10000
(
(
(
Frequency MHz
Frequency MHz
Frequency MHz
MMZ2012Y152BT000
MMZ2012Y202BT000
MMZ2012D800BT000
1800
1600
1400
1200
1000
800
600
400
200
0
2500
700
600
500
400
300
200
100
0
2000
Z
Z
1500
R
1000
500
Z
X
X
X
R
R
0
1
10
100
1000
1
10
100
1000
)
1
10
100
1000
( )
Frequency MHz
(
)
(
Frequency MHz
Frequency MHz
MMZ2012D121BT000
MMZ2012D301BT000
1200
1000
800
600
400
200
0
4500
4000
3500
3000
2500
2000
1500
1000
500
Z
Z
X
R
X
R
0
1
10
100
1000
)
1
10
100
1000
( )
Frequency MHz
(
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz2012_en.
(11/11)
E M C C o m p o n e n t s
MMZ2012 type
PACKAGING STYLE
REEL DIMENSIONS
2.0 0.5
1.0
+2.0
–0.0
8.4
ø13 0.2
ø21 0.8
14.4max.
ø180 2.0
Dimensions in mm
TAPE DIMENSIONS
2.0±0.05
4.0±0.1
1.50+0.1
A
4.0±0.1
K
Dimensions in mm
K
Type
MMZ2012
A
1.5±0.2
B
P1
4.0±0.1
2.3±0.2
1.1max.
160min.
Taping
200min.
300min.
Drawing direction
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160722 / beads_commercial_signal_mmz2012_en.
相关型号:
MMZ2012R121AT
Ferrite Chip, 1 Function(s), 0.8A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 2 PIN
TDK
MMZ2012R121ATD25
Ferrite Chip, 1 Function(s), 0.8A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 2 PIN
TDK
MMZ2012R300AT
Ferrite Chip, 1 Function(s), 1.5A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 2 PIN
TDK
©2020 ICPDF网 联系我们和版权申明