概述
数据手册MPZ1608D300BTA00 概述
Chip Beads For power line
MPZ1608D300BTA00 数据手册
通过下载MPZ1608D300BTA00数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载E M C C o m p o n e n t s
February 2015
Chip Beads
For power line
MPZ Series
MPZ1608 Type
MPZ1608
1608[0603 inch]*
* Dimensions Code JIS[EIA]
(2/11)
E M C C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20150209 / beads_commercial_power_mpz1608_en.
(3/11)
E M C C o m p o n e n t s
Product compatible with RoHS directive
Halogen-free
Chip Beads
For power line
Compatible with lead-free solders
Overview of MPZ1608 Type
FEATURES
Noise reduction solution for power line.
Compared to the MMZ Series, has low direct current resistance for compatibility with large currents, optimal for low power consumption.
Various frequency characteristics with 5 materials of different features for countermeasures against everything from general signals to
high-speed signals.
Performs well even in signal lines where low direct current resistance is required.
APPLICATION
Noise removal for mobile devices such as smartphones and tablet terminals, and various modules.
Noise removal for PCs and recorders, household appliances such as STBs, smart grids, and industrial equipment.
PART NUMBER CONSTRUCTION
MPZ
1608
B
471
A
T
A00
L×W×T Dimensions
(mm)
Impedance
(ꢂ) at 100MHz
Characteristic
Series name
Material name
Packaging style
Internal code
type
1.6×0.8x0.6
1.6×0.8x0.8
S
Y
B
R
D
260
471
26
470
A
B
T
Taping
A00
AH0
1608
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight
Operating
temperature
Storage
temperature
Type
ꢀ
(pieces/reel)
4,000
（°C）
（°C）
（mg）
t=0.6mm
t=0.8mm
–55 to +125
–55 to +125
–55 to +125
–55 to +125
3
4
MPZ1608
4,000
ꢀꢁ
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.
(4/11)
E M C C o m p o n e n t s
MPZ1608 Type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
30 to 60s
Time
t3
10s
T2
180°C
150°C
230°C
250 to 260°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.
(5/11)
E M C C o m p o n e n t s
MPZ1608 Type
MATERIAL CHARACTERISTICS
B material: This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a
frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals.
R material: For wide frequency applications calling for broad impedance characteristics.
For digital signal line applications calling requiring good waveform integrity. Impedance values selected for effectiveness at 10
to 200MHz.
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core.
For signal line applications in which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to
300MHz.
Y material: High frequency range type intended for the 100MHz region and above.
For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for
effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICSꢀ
2500
D
2000
Y
1500
1000
S
R
500
0
B
10
100
1000
Frequency(MHz)
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.
(6/11)
E M C C o m p o n e n t s
MPZ1608 Type
SHAPE & DIMENSIONS
1.6 0.15
( )
Thickness T
0.6 0.15mm
0.8 0.15mm
Dimensions in mm
0.3 0.2
RECOMMENDED LAND PATTERN
0.6
0.8
0.6
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.
(7/11)
E M C C o m p o n e n t s
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated currentꢀ
Impedance
DC resistance
Part No.
Thickness T
[100MHz]
(ꢂ)
470
26
30
60
100
120
180
220
330
470
600
1000
390
60
Tolerance
25%
25%
10ꢂ
(ꢂ)max.
0.150
0.007
0.010
0.020
0.030
0.045
0.050
0.050
0.080
0.150
0.150
0.300
0.120
0.030
0.040
0.050
0.100
0.060
0.100
0.150
(A)max.
1.0
6.0
5.0
3.5
3.0
2.0
2.0
2.2
1.7
1.0
1.0
0.8
1.2
2.3
2.0
1.8
1.5
1.8
1.2
1.0
(mm)
0.8
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
MPZ1608B471ATA00
MPZ1608S260ATAH0
MPZ1608S300ATAH0
MPZ1608S600ATAH0
MPZ1608S101ATAH0
MPZ1608S121ATAH0
MPZ1608S181ATAH0
MPZ1608S221ATA00
MPZ1608S331ATA00
MPZ1608S471ATA00
MPZ1608S601ATA00
MPZ1608S102ATA00
MPZ1608R391ATA00
MPZ1608Y600BTA00
MPZ1608Y101BTA00
MPZ1608Y151BTA00
MPZ1608Y221BTA00
MPZ1608D300BTA00
MPZ1608D600BTA00
MPZ1608D101BTA00
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
10ꢂ
100
150
220
30
60
25%
25%
100
ꢀ
Please refer to the graph of Rated current vs. temperature characteristics (derating) about the rating current at 85°C or more in temperature of the product.
○ Measurement equipment
Measurement item
Product No.
Manufacturer
Impedance
DC resistance
E4991A+16192A
Type-7556
Agilent Technologies
Yokogawa
＊ Equivalent measurement equipment may be used.
○ Rated current vs. temperature characteristics (derating)
7
6
5
4
3
2
1
0
–55 –35 –15
5
25
45
65
85 105 125
(
)
Temperature °C
S260A
Y600B
Y151B,D300B
S300A
S221A
S331A
S600A
S121A,S181A,Y101B
Y221B
S101A
R391A,D600B
S102A
B471A,S471A,S601A,D101B
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.
(8/11)
E M C C o m p o n e n t s
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MPZ1608B SERIES
MPZ1608S SERIES
MPZ1608R SERIES
1200
1000
900
800
700
600
500
400
300
200
100
0
500
500
MPZ1608S102A
MPZ1608S331A
MPZ1608S221A
MPZ1608S181A
MPZ1608S121A
MPZ1608S101A
MPZ1608S600A
MPZ1608S260A
MPZ1608S300A
MPZ1608B471A
MPZ1608R391A
MPZ1608S601A
MPZ1608S471A
400
300
200
100
0
400
300
200
100
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
(
Frequency MHz
Frequency MHz
MPZ1608Y SERIES
MPZ1608D SERIES
350
600
MPZ1608D101B
MPZ1608Y221B
300
250
200
150
100
50
500
400
300
200
100
0
MPZ1608Y151B
MPZ1608Y101B
MPZ1608D600B
MPZ1608Y600B
MPZ1608D300B
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.
(9/11)
E M C C o m p o n e n t s
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ1608B471ATA00
MPZ1608S260ATAH0
MPZ1608S300ATAH0
500
40
35
30
25
40
35
30
25
20
15
10
5
400
Z
300
Z
Z
20
R
R
R
200
15
10
5
X
100
0
X
X
0
0
1
10
100
1000
)
10000
10000
10000
1
10
100
1000
( )
Frequency MHz
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
MPZ1608S600ATAH0
MPZ1608S101ATAH0
MPZ1608S121ATAH0
100
80
60
40
20
0
160
140
120
200
150
Z
Z
100
Z
R
R
R
80
60
40
20
0
100
50
0
X
X
X
1
10
100
1000
)
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
(
Frequency MHz
(
Frequency MHz
MPZ1608S181ATAH0
MPZ1608S221ATA00
MPZ1608S331ATA00
300
250
300
250
450
400
350
300
250
200
150
100
50
200
200
Z
Z
Z
R
R
150
150
100
50
R
100
50
0
X
X
X
0
0
1
10
100
1000
)
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
(
(
Frequency MHz
Frequency MHz
MPZ1608S471ATA00
MPZ1608S601ATA00
MPZ1608S102ATA00
700
600
500
800
700
600
1200
1000
Z
800
500
Z
400
R
R
Z
400
300
200
100
0
600
400
200
0
R
300
200
100
0
X
X
X
(
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
(
Frequency MHz
Frequency MHz
MPZ1608R391ATA00
MPZ1608Y600BTA00
MPZ1608Y101BTA00
500
140
120
100
80
200
400
150
100
50
Z
Z
Z
300
R
R
R
60
200
100
0
40
20
X
X
X
0
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
10000
(
(
(
)
Frequency MHz
Frequency MHz
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.
(10/11)
E M C C o m p o n e n t s
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ1608Y151BTA00
MPZ1608Y221BTA00
MPZ1608D300BTA00
300
250
200
150
100
50
350
300
250
200
150
100
50
250
200
150
100
50
Z
Z
R
Z
R
R
X
X
X
0
0
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
(
(
Frequency MHz
Frequency MHz
MPZ1608D600BTA00
MPZ1608D101BTA00
600
500
400
300
200
100
0
350
300
250
200
150
100
50
Z
Z
X
R
R
X
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.
(11/11)
E M C C o m p o n e n t s
MPZ1608 Type
PACKAGING STYLE
REEL DIMENSIONS
2.0 0.5
1.0
+2.0
–0.0
8.4
ø13 0.2
ø21 0.8
14.4max.
ø180 2.0
Dimensions in mm
TAPE DIMENSIONS
1.50+0.1
2.0 0.05
4.0 0.1
A
P1
K
Dimensions in mm
K
Type
MPZ1608
A
B
1.9 0.2
P1
4.0 0.1
1.1 0.2
1.1max.
40 to 80
Taping
200min.
300min.
Drawing direction
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.
MPZ1608D300BTA00 CAD模型
引脚图
封装焊盘图
MPZ1608D300BTA00 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| MPZ1608D300BTD25 | TDK | 片式磁珠 | 获取价格 |
|
| MPZ1608D600B | TDK | EMI countermeasure product for power line | 获取价格 |
|
| MPZ1608D600BT | TDK | EMI countermeasure product for power line | 获取价格 |
|
| MPZ1608D600BTA00 | TDK | Ferrite Chip, 1 Function(s), 1.2A, EIA STD PACKAGE SIZE 0603, 2 PIN | 获取价格 |
|
| MPZ1608D600BTD25 | TDK | Ferrite Chip, 1 Function(s), 1.2A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0603, 2 PIN | 获取价格 |
|
| MPZ1608R391A | TDK | EMI countermeasure product for power line | 获取价格 |
|
| MPZ1608R391AT | TDK | EMI countermeasure product for power line | 获取价格 |
|
| MPZ1608R391ATA00 | TDK | FERRITE BEAD 390 OHM 0603 1LN | 获取价格 |
|
| MPZ1608R391ATD25 | TDK | Ferrite Chip, 1 Function(s), 1.2A, HALOGEN FREE AND ROHS COMPLIANT, EIA STD PACKAGE SIZE 0603, 2 PIN | 获取价格 |
|
| MPZ1608S101A | TDK | EMI countermeasure product for power line | 获取价格 |
|
MPZ1608D300BTA00 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
