首页 |元器件品牌

NLV32T056J [TDK]

Inductors for Standard Circuits Wound Ferrite; 电感器的标准电路伤口铁氧体
NLV32T056J
型号： NLV32T056J
厂家： TDK ELECTRONICS    TDK ELECTRONICS
描述：

Inductors for Standard Circuits Wound Ferrite
电感器的标准电路伤口铁氧体

电感器
文件： 总14页 (文件大小：2139K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
I
N
D
U
C
T
O
R
S
May 2013  
Inductors for Standard Circuits  
Wound Ferrite  
NLVseries  
NLV25  
NLV32  
2520 [1008 inch]*  
3225 [1210 inch]  
* Dimensions Code JIS[EIA]  
(1/13)  
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS  
Before using these products, be sure to request the delivery specifications.  
SAFETY REMINDERS  
Please pay sufficient attention to the warnings for safe designing when using these products.  
REMINDERS  
The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or  
less).  
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.  
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).  
Before soldering, be sure to preheat components.  
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature  
does not exceed 150°C.  
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.  
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.  
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to  
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.  
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal  
design.  
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.  
A malfunction may occur due to magnetic interference.  
Use a wrist band to discharge static electricity in your body through the grounding wire.  
Do not expose the products to magnets or magnetic fields.  
Do not use for a purpose outside of the contents regulated in the delivery specifications.  
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications  
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement  
equipment, industrial robots) under a normal operation and use condition.  
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or  
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to  
society, person or property.  
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions  
set forth in the each catalog, please contact us.  
(1) Aerospace/Aviation equipment  
(2) Transportation equipment (cars, electric trains, ships, etc.)  
(3) Medical equipment  
(8) Public information-processing equipment  
(9) Military equipment  
(10) Electric heating apparatus, burning equipment  
(11) Disaster prevention/crime prevention equipment  
(12) Safety equipment  
(4) Power-generation control equipment  
(5) Atomic energy-related equipment  
(6) Seabed equipment  
(13) Other applications that are not considered general-purpose  
applications  
(7) Transportation control equipment  
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing  
protection circuit/device or providing backup circuits in your equipment.  
001-01 / 20130516 / e511_nlv.
(2/13)  
I
N
D
U
C
T
O
R
S
Product compatible with RoHS directive  
Halogen-free  
Inductors for Standard Circuits  
Wound Ferrite  
Compatible with lead-free solders  
Overview of the NLV Series  
FEATURES  
Resin mold type wound inductor for standard circuits.  
0.01 to 470µH, E-12 Series, wide lineup compatible with J (± ±5) tolerance, can be used for applications that need to meet strict L  
tolerance such as filter circuits.  
Has excellent inductance temperature characteristics in the operating temperature range.  
APPLICATION  
Smart meters, AV equipment, xDSL, electronic devices for communications infrastructure such as mobile base stations, industrial  
equipment, other  
Vehicle accessories (car navigation systems, car audio, ETC)  
PART NUMBER CONSTRUCTION  
NLV  
25  
T
-
010  
-
J
-
□□  
L×W×H Dimensions  
(mm)  
Inductance  
(µH)  
Inductance  
tolerance  
Series name  
Packaging style  
Internal code  
25  
32  
2.5×2.0×1.8  
3.2×2.5×2.2  
T
Taping  
010  
0.01  
0.1  
1
10  
100  
J
5%  
Compatible with the RoHS  
Directive, Exemption  
regulations apply  
R10  
1R0  
100  
101  
PF  
EF  
Compatible with the RoHS  
Directive  
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT  
Temperature range  
Package quantity  
Individual weight  
Operating  
temperature  
Storage  
temperature  
Type  
  
(pieces/reel)  
2000  
（°C）  
（°C）  
（mg）  
25  
50  
NLV25  
NLV32  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
2000  
  
Operating temperature range includes self-temperature rise.  
The Storage temperature range is for after the circuit board is mounted.  
  
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/  
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.
(3/13)  
I
N
D
U
C
T
O
R
S
Overview of the NLV Series  
RECOMMENDED REFLOW PROFILE  
Preheating  
Soldering  
Natural  
cooling  
Peak  
T4  
T3  
T3  
T2  
t3  
t2  
T1  
t1  
t: Time  
Preheating  
Temp.  
T1  
Soldering  
Temp.  
T3  
Peak  
Temp.  
T4  
Time  
t1  
90 to 120s  
Time  
t2  
40s  
Time  
t3  
10s max.  
T2  
180°C  
150°C  
230°C  
255°C  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.
(4/13)  
I
N
D
U
C
T
O
R
S
NLV series  
NLV25 Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
0.4  
2.5 0.2  
0.5  
0.4  
1.7  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
1.0  
1.5  
1.0  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.
(5/13)  
I
N
D
U
C
T
O
R
S
NLV seriesꢀ  
NLV25 Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
L
Self-resonant  
frequency  
(MHz)  
min.  
2150  
2050  
2000  
1850  
1650  
1550  
1450  
1350  
1200  
1100  
1050  
900  
800  
700  
550  
500  
450  
425  
400  
375  
350  
325  
300  
260  
245  
230  
182  
135  
105  
70  
55  
48  
43  
42  
39  
36  
33  
30  
26  
24  
22  
21  
20  
18  
17  
16  
Rated current  
(mA)  
max.  
L, Q measuring  
frequency  
(MHz)  
DC resistance  
(Ω)  
max.  
Q
min.  
Part No.  
(µH)  
Tolerance  
0.01  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
15  
15  
15  
15  
15  
15  
20  
20  
20  
20  
20  
20  
20  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
20  
20  
20  
20  
20  
15  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
0.26  
0.27  
0.29  
0.31  
0.37  
0.4  
0.42  
0.45  
0.5  
530  
500  
480  
450  
420  
410  
400  
380  
360  
340  
320  
300  
280  
550  
500  
460  
430  
420  
400  
375  
350  
325  
300  
260  
245  
230  
220  
210  
200  
195  
185  
180  
175  
170  
165  
160  
155  
150  
140  
130  
125  
115  
110  
90  
NLV25T-010J-  
NLV25T-012J-  
NLV25T-015J-  
NLV25T-018J-  
NLV25T-022J-  
NLV25T-027J-  
NLV25T-033J-  
NLV25T-039J-  
NLV25T-047J-  
NLV25T-056J-  
NLV25T-068J-  
NLV25T-082J-  
NLV25T-R10J-  
NLV25T-R12J-  
NLV25T-R15J-  
NLV25T-R18J-  
NLV25T-R22J-  
NLV25T-R27J-  
NLV25T-R33J-  
NLV25T-R39J-  
NLV25T-R47J-  
NLV25T-R56J-  
NLV25T-R68J-  
NLV25T-R82J-  
NLV25T-1R0J-  
NLV25T-1R2J-  
NLV25T-1R5J-  
NLV25T-1R8J-  
NLV25T-2R2J-  
NLV25T-2R7J-  
NLV25T-3R3J-  
NLV25T-3R9J-  
NLV25T-4R7J-  
NLV25T-5R6J-  
NLV25T-6R8J-  
NLV25T-8R2J-  
NLV25T-100J-  
NLV25T-120J-  
NLV25T-150J-  
NLV25T-180J-  
NLV25T-220J-  
NLV25T-270J-  
NLV25T-330J-  
NLV25T-390J-  
NLV25T-470J-  
NLV25T-560J-  
NLV25T-680J-  
NLV25T-820J-  
NLV25T-101J-  
0.012  
0.015  
0.018  
0.022  
0.027  
0.033  
0.039  
0.047  
0.056  
0.068  
0.082  
0.1  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1
0.6  
0.65  
0.75  
0.8  
0.3  
0.35  
0.4  
0.5  
0.55  
0.6  
0.65  
0.68  
0.75  
0.85  
1
1.1  
1.2  
1.3  
1.45  
1.55  
1.7  
1.9  
2.1  
2.3  
2.5  
2.7  
3.05  
3.5  
3.8  
4.4  
4.8  
5.5  
6.3  
7.1  
9.5  
11.1  
12.1  
16.6  
19  
100  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
0.796  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
12  
15  
18  
22  
27  
33  
39  
47  
56  
68  
82  
100  
80  
75  
70  
66  
15  
13  
12  
21  
60  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (10% below the initial L value)  
Idc2: When based on the temperature increase (Temperature increase of 20°C by self heating)  
  
□ : Please specify internal code, PF (compatible with the RoHS Directive, exemption regulations apply) or EF (compatible with the RoHS Directive)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
4191A＋16092A  
L, Q  
Agilent Technologies  
4194A+16085A+16093B  
Self-resonant frequency  
DC resistance  
8753C  
VP-2941A  
Agilent Technologies  
Panasonic  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.
(6/13)  
I
N
D
U
C
T
O
R
S
NLV seriesꢀ  
NLV25 Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
1000  
101J  
820J  
680J  
560J  
470J  
390J  
330J  
270J  
220J  
180J  
150J  
120J  
100J  
8R2J  
100  
10  
1
6R8J  
5R6J  
4R7J  
3R9J  
3R3J  
2R7J  
2R2J  
1R8J  
1R5J  
1R2J  
1R0J  
R82J  
R68J  
R56J  
R47J  
R39J  
R33J  
R27J  
0.1  
010J  
0.01  
012J  
033J  
027J  
R10J  
068J  
015J  
047J  
039J  
018J  
022J  
056J  
082J  
R22J  
R18J  
R15J  
R12J  
0.001  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4291A  
4294A  
Agilent Technologies  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.
(7/13)  
I
N
D
U
C
T
O
R
S
NLV seriesꢀ  
NLV25 Type  
ELECTRICAL CHARACTERISTICS  
Q FREQUENCY CHARACTERISTICS GRAPH  
60  
056J  
50  
047J  
068J  
4R7J  
150J  
082J  
1R8J  
3R3J  
40  
30  
20  
10  
0
033J  
180J  
R33J  
R39J  
2R7J  
3R9J  
100J  
1R0J  
R27J  
010J  
6R8J  
039J  
R15J  
R12J  
R68J  
1R2J  
5R6J  
120J  
012J  
022J  
8R2J  
2R2J  
015J  
470J  
220J  
018J  
270J  
330J  
R10J  
390J  
027J  
560J  
820J  
680J  
101J  
R22J  
R18J  
1R5J  
R82J  
R56J  
R47J  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4291A  
4294A  
Agilent Technologies  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.
(8/13)  
I
N
D
U
C
T
O
R
S
NLV series  
NLV32 Type  
SHAPE & DIMENSIONS  
470J  
(
)
(
)
(
)
0.55  
3.2 0.2  
0.55  
0.55  
2.1  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
1.2  
2
1.2  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.
(9/13)  
I
N
D
U
C
T
O
R
S
NLV seriesꢀ  
NLV32 Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
L
Self-resonant  
frequency  
(MHz)  
min.  
2500  
2300  
2100  
1900  
1700  
1500  
1400  
1300  
1200  
1100  
1000  
900  
700  
500  
450  
400  
350  
320  
300  
250  
220  
180  
160  
140  
120  
100  
85  
80  
75  
70  
60  
55  
50  
45  
40  
35  
Rated current  
(mA)  
max.  
L, Q measuring  
frequency  
(MHz)  
DC resistance  
(Ω)  
max.  
Q
min.  
Part No.  
(µH)  
Tolerance  
0.01  
0.012  
0.015  
0.018  
0.022  
0.027  
0.033  
0.039  
0.047  
0.056  
0.068  
0.082  
0.1  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
15  
17  
19  
21  
23  
23  
25  
25  
26  
26  
27  
27  
28  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
0.13  
0.14  
0.16  
0.18  
0.2  
0.22  
0.24  
0.27  
0.3  
0.33  
0.36  
0.4  
0.44  
0.22  
0.25  
0.28  
0.32  
0.36  
0.4  
0.45  
0.5  
0.55  
0.6  
0.65  
0.7  
0.75  
0.85  
0.9  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
450  
400  
390  
370  
350  
320  
290  
260  
250  
220  
200  
180  
170  
NLV32T-010J-  
NLV32T-012J-  
NLV32T-015J-  
NLV32T-018J-  
NLV32T-022J-  
NLV32T-027J-  
NLV32T-033J-  
NLV32T-039J-  
NLV32T-047J-  
NLV32T-056J-  
NLV32T-068J-  
NLV32T-082J-  
NLV32T-R10J-  
NLV32T-R12J-  
NLV32T-R15J-  
NLV32T-R18J-  
NLV32T-R22J-  
NLV32T-R27J-  
NLV32T-R33J-  
NLV32T-R39J-  
NLV32T-R47J-  
NLV32T-R56J-  
NLV32T-R68J-  
NLV32T-R82J-  
NLV32T-1R0J-  
NLV32T-1R2J-  
NLV32T-1R5J-  
NLV32T-1R8J-  
NLV32T-2R2J-  
NLV32T-2R7J-  
NLV32T-3R3J-  
NLV32T-3R9J-  
NLV32T-4R7J-  
NLV32T-5R6J-  
NLV32T-6R8J-  
NLV32T-8R2J-  
100  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
25.2  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
7.96  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
1
1.1  
1.2  
1.3  
1.5  
1.6  
1.8  
2
5.6  
6.8  
8.2  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (10% below the initial L value)  
Idc2: When based on the temperature increase (Temperature increase of 20°C by self heating)  
  
□ : Please specify internal code, PF (compatible with the RoHS Directive, exemption regulations apply) or EF (compatible with the RoHS Directive)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
4191A＋16092A  
L, Q  
Agilent Technologies  
4194A+16085A+16093B  
Self-resonant frequency  
DC resistance  
8753C  
VP-2941A  
Agilent Technologies  
Panasonic  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.
(10/13)  
I
N
D
U
C
T
O
R
S
NLV seriesꢀ  
NLV32 Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
L
Self-resonant  
frequency  
Rated current  
(mA)  
max.  
L, Q measuring  
frequency  
(MHz)  
DC resistance  
(Ω)  
max.  
Q
min.  
Part No.  
(MHz)  
min.  
30  
20  
20  
20  
20  
20  
17  
16  
15  
13  
12  
11  
10  
10  
8
(µH)  
tolerance  
10  
12  
15  
18  
22  
27  
33  
39  
47  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
5%  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
30  
20  
20  
20  
20  
20  
20  
20  
20  
20  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
2.52  
0.796  
0.796  
0.796  
0.796  
0.796  
0.796  
0.796  
0.796  
0.796  
2.1  
2.5  
2.8  
3.3  
3.7  
5
5.6  
6.4  
7
150  
140  
130  
120  
110  
80  
70  
65  
60  
55  
50  
45  
40  
70  
65  
60  
50  
45  
NLV32T-100J-  
NLV32T-120J-  
NLV32T-150J-  
NLV32T-180J-  
NLV32T-220J-  
NLV32T-270J-  
NLV32T-330J-  
NLV32T-390J-  
NLV32T-470J-  
NLV32T-560J-  
NLV32T-680J-  
NLV32T-820J-  
NLV32T-101J-  
NLV32T-121J-  
NLV32T-151J-  
NLV32T-181J-  
NLV32T-221J-  
NLV32T-271J-  
NLV32T-331J-  
NLV32T-391J-  
NLV32T-471J-  
56  
68  
82  
8
9
10  
10  
11  
15  
17  
21  
28  
34  
36  
40  
100  
120  
150  
180  
220  
270  
330  
390  
470  
7
7
6
5
5
4
40  
35  
25  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (10% below the initial L value)  
Idc2: When based on the temperature increase (Temperature increase of 20°C by self heating)  
  
□ : Please specify internal code, PF (compatible with the RoHS Directive, exemption regulations apply) or EF (compatible with the RoHS Directive)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
4191A＋16092A  
L, Q  
Agilent Technologies  
4194A+16085A+16093B  
Self-resonant frequency  
DC resistance  
8753C  
VP-2941A  
Agilent Technologies  
Panasonic  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.
(11/13)  
I
N
D
U
C
T
O
R
S
NLV seriesꢀ  
NLV32 Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
10000  
471J  
391J  
221J  
331J  
271J  
181J  
1000  
151J  
101J  
820J  
121J  
100J  
8R2J  
6R8J  
5R6J  
4R7J  
3R9J  
3R3J  
2R7J  
2R2J  
1R8J  
100  
10  
1
680J  
560J  
470J  
390J  
330J  
270J  
220J  
180J  
150J  
120J  
R82J  
R68J  
R56J  
R47J  
1R5J  
1R2J  
R39J  
R33J  
R27J  
1R0J  
082J  
R22J  
R10J  
0.1  
0.01  
027J  
022J  
018J  
047J  
056J  
068J  
010J 012J  
R12J  
R15J R18J  
033J  
015J  
039J  
0.001  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4291A  
4294A  
Agilent Technologies  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.
(12/13)  
I
N
D
U
C
T
O
R
S
NLV seriesꢀ  
NLV32 Type  
ELECTRICAL CHARACTERISTICS  
Q FREQUENCY CHARACTERISTICS GRAPH  
70  
056J  
068J  
039J  
60  
50  
047J  
082J  
033J  
180J  
1R2J  
100J  
220J  
4R7J  
8R2J  
6R8J  
027J  
1R0J  
40  
270J  
1R5J  
010J  
012J  
820J  
120J  
1R8J  
2R7J  
391J  
R10J  
2R2J  
R82J  
5R6J  
R56J  
R39J  
150J  
271J  
30  
015J  
330J  
R15J  
390J  
221J  
121J  
R12J  
3R3J  
018J  
470J  
3R9J  
022J  
560J  
R47J  
20  
R68J  
680J  
R18J  
331J  
R22J  
10  
R27J  
101J  
151J  
R33J  
181J  
471J  
0
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4291A  
4294A  
Agilent Technologies  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.
(13/13)  
I
N
D
U
C
T
O
R
S
NLV series  
Packaging Style  
REEL DIMENSIONS  
2.0 0.5  
B
Type  
NLV25  
NLV32  
A
ø180  
ø180  
B
13  
13  
C
ø60  
ø60  
D
9
9
E
0.5  
0.5  
* These values are typical values.  
(
)
1.0  
E
ø13.0 0.5  
ø21.0 0.8  
D
A
Dimensions in mm  
TAPE DIMENSIONS  
øD0  
P2  
P0  
P1  
K
t
Dimensions in mm  
A0  
Type  
NLV25  
NLV32  
A0  
2.3  
2.8  
B0  
2.7  
3.5  
øD0  
E
F
P0  
P1  
P2  
W
K
2
t
1.5+0.1/-0 1.75 0.1 3.50 0.05 4.00 0.10 4.00 0.10 2.00 0.05 8.00 0.30  
1.5+0.1/-0 1.75 0.1 3.50 0.05 4.00 0.10 4.00 0.10 2.00 0.05 8.00 0.30 2.3  
0.4  
0.4  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e511_nlv.

相关型号：

NLV32T068J

 Inductors for Standard Circuits Wound Ferrite
TDK

NLV32T082J

 Inductors for Standard Circuits Wound Ferrite
TDK

NLV32T100J

 Inductors for Standard Circuits Wound Ferrite
TDK

NLV32T101J

 Inductors for Standard Circuits Wound Ferrite
TDK

NLV32T120J

 Inductors for Standard Circuits Wound Ferrite
TDK

NLV32T121J

 Inductors for Standard Circuits Wound Ferrite
TDK

NLV32T150J

 Inductors for Standard Circuits Wound Ferrite
TDK

NLV32T151J

 Inductors for Standard Circuits Wound Ferrite
TDK

NLV32T180J

 Inductors for Standard Circuits Wound Ferrite
TDK

NLV32T181J

 Inductors for Standard Circuits Wound Ferrite
TDK

NLV32T1R0J

 Inductors for Standard Circuits Wound Ferrite
TDK

NLV32T1R2J

 Inductors for Standard Circuits Wound Ferrite
TDK
©2020 ICPDF网 联系我们和版权申明