NVM100026 [TDK]

AC-DC电源;
NVM100026
型号: NVM100026
厂家: TDK ELECTRONICS    TDK ELECTRONICS
描述:

AC-DC电源

文件: 总4页 (文件大小:1224K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
NV-Power NVM-175  
https://emea.tdk-lambda.com/nv  
https://product.tdk.com/en/power/nv  
180W Configurable  
Medical power supply.  
Medical  
Industrial  
Test  
Broadcast  
Renewable  
Comms  
Features  
Benefits  
Highꢀefficiency  
Minimisesꢀheatꢀinꢀsystem  
Lowꢀprofile  
Fitsꢀ1Uꢀapplications  
Dualꢀfusing  
Simplifiesꢀsystemꢀdesign,ꢀreducesꢀcost  
Simplifiesꢀsystemꢀdesign  
Lowꢀcostꢀofꢀownership  
2ꢀxꢀMOPPsꢀisolation  
3ꢀyearꢀwarranty  
Input  
90-264Vac  
(100 - 240Vac nominal)  
Input Voltage  
Input Frequency  
45 - 63Hz  
Input Harmonics  
Input Fuse  
EN61000-3-2 compliant  
Inrush Current  
<40A at 25°C and 230Vac (cold start)  
Dual fused, Fast acting (not user accessible)  
Earth Leakage  
Current  
80µA at 120Vac (60Hz), 170µA max at 240Vac (60Hz)  
Worst case leakage current is less than 200µA at 264Vac, 63Hz (normal condition, 0.33mA Single Fault Condition)  
How To Create A Product Description  
Blank standard, vertical connector  
Global Case Connector  
Option Option Option  
Vout  
000-  
NVM1-1  
Right angled connector  
-R (see handbook for ‘R’ connection  
and mechanical details)  
T
G
12V / 15A  
24V / 7.5A  
Blank no case  
-C U chassis + cover  
-U U chassis  
See Global Interface  
Signals table for details  
Confirm availability of created product with TDK-Lambda  
QUICK SELECTOR - example configurations  
Model  
Ch1  
Standby  
12V / 0.2A  
12V / 0.2A  
Remote On/Off  
NVM1-1T000-S1  
NVM1-1G000-S1  
12V / 15A  
24V / 7.5A  
TTL high / OC to inhibit  
TTL high / OC to inhibit  
Output Specification  
Turn on time  
2s max  
at 90Vac and 100% rated output power  
Efficiency  
up to 90%  
Hold up  
16ms min  
at 90Vac  
Ripple and Noise  
Voltage Accuracy  
Remote Sense  
Minimum Load  
Total Regulation  
<1%  
(or 50mV if higher) pk-pk, using EIAJ test method & 20MHz bandwidth  
±1%  
Yes  
No  
Channel 1. Max 0.5V total line drop  
on any output  
1% (or 50mV if greater)  
Including Line (for 90-264Vac input change) and Load (for 0-100% load change)  
of set voltage for 50% load change  
(in 50µs within the range 25-100% load)  
Transient Response  
<4%  
Recovery  
500µs  
Yes  
for recovery to 1% of set voltage  
Over Voltage Protection  
Short Circuit Protection  
120-135% of Vout. Remove ac for 10 seconds then reapply to restart unit  
Yes  
Over Temperature Protec-  
tion  
Yes  
Output Power  
180W  
NVM175_Datasheet_60966 - v14.0  
1
NV-Power NVM-175  
Isolation  
2 x MOPPs (3rd edition 60601)  
4.5kVac  
type tested to 4.5kVac (equivalent to 6.3kVdc), production  
tested to 4.3kVdc  
Input to Output Reinforced  
1 x MOOP (3rd edition 60601)  
1.5kVac, 2.3kVdc  
Input to Earth  
Basic  
1 x MOPP (3rd edition 60601)  
1.5kVac  
Output to Earth  
Environment  
0°C to 50°C operational, -40°C to 85°C storage (max 12 months).  
Full load, with 2m/s air blown from input to output (approximately 10CFM)  
Temperature  
50°C to 70°C derate each output by 2.5% per °C  
with 2m/s air blown from input to output  
Derating  
Low Temp Startup  
-20°C  
Humidity  
5 - 95% RH non condensing  
±3 x 30g shocks in each plane, total 18 shocks  
30g shock = 11ms (+/-0.5msec), half sine  
Conforms to EN60068-2-27, EN60068-2-47, IEC68-2-27, IEC68-2-47, JIS C0041-1987.  
Conforms to MIL-STD-810E/F, Method 516.5, Pro I, IV, VI  
Shock  
Single axis 10 - 500 Hz at 2g (sweep and endurance at resonance) in all 3 planes  
Conforms to EN60068-2-6, IEC68-2-6  
Vibration  
Conforms to MIL-STD-810E, Method 514.4, Pro I, Cat 1,9  
5000 metres operational  
(3000 metres for medical approval, 4000m for 60601-1 3rd edition)  
Altitude  
Pollution  
Degree 2, Material group IIIb  
Global Interface Signals  
Logic level to en-  
PSU good signal  
Standby  
able main output  
Power good = logic low signal to indicate when ac supply is good and  
output 1 is within regulation  
S
12V / 0.2A  
12V / 0.2A  
12V / 0.2A  
12V / 0.2A  
5V / 0.5A  
Power good  
Power good  
High  
Low  
High  
Low  
Low  
S1  
S2  
S3  
S5  
Channel 1 good = logic low signal to indicate when output 1 is within  
regulation  
Channel 1 good  
Channel 1 good  
Power good  
Approvals / Accreditations  
IEC/EN 62368-1, UL62368-1 / CSA 22.2 No 62368-1  
File E135494  
File E135494  
IEC/EN 60950-1, UL60950-1 / CSA 22.2 No 60950-1  
IEC/EN 60601-1, UL/CSA 60601-1, ANSI/AAMI ES60601-1  
CAN/CSA-C22.2 No 60601-1-08  
File E349607  
Low Voltage Directive (LVD), electromagnetic compatibility  
(EMC) and Restriction of Hazardous Substances (RoHS)  
CE Mark (EN62368-1)  
CB certificate and Report available on request  
Please check with technical sales for status of approvals  
Designed and manufactured under the control of ISO9001 and ISO13485 (including risk management).  
Immunity EN61000-6-2:2005, EN60601-1-2:2007  
Criteria  
Air discharge 8kV, Contact discharge 6kV. Not applicable to open  
frame units  
A
A
A
Electrostatic Discharge  
Electromagnetic Field  
Fast / Burst Transient  
EN61000-4-2  
EN61000-4-3  
EN61000-4-4  
Level 3  
Level 3  
Level 4  
12V/m  
ac input tested to 4.4kV  
dc output tested to 2.2kV  
Common mode - 2.2kV, Differential - 1.1kV  
Surge Immunity  
EN61000-4-5  
EN61000-4-6  
EN61000-4-8  
Level 3  
Level 3  
Level 4  
A
A
A
A
12V  
Conducted RF Immunity  
Power Frequency Magnetic Field  
30A/m  
Criteria B for 5 sec interruption and dips to 40% for 5 cycles below  
154Vac nominal input  
Voltage Dips, Variations, Interruptions EN61000-4-11 Class 3  
Emissions EN61000-6-3:2007, EN60601-1-2:2007  
(as per CISPR.11/22) Class B, FCC47 part 15 subpart B  
see application note for details.  
Radiated Electric Field  
EN55011, EN55032  
Conducted Emissions  
Conducted Harmonics  
Flicker  
EN55011, EN55032  
EN61000-3-2  
(as per CISPR.11/22) Class B, FCC47 part 15 subpart B  
Class A  
EN61000-3-3  
Compliant - dmax only  
NVM175_Datasheet_60966 - v14.0  
NV-Power NVM-175  
2
Output Connector J1  
PIN 10  
PIN 20  
Pin Function  
10 Standbyꢀ+ve  
Pin Function  
20 Standbyꢀ-ve  
19 Remoteꢀon/off  
18 Ch1ꢀGood  
17 +Vꢀoutput  
16 +Vꢀoutput  
15 -ꢀSense  
9
8
7
6
5
4
3
2
1
Powerꢀgood  
+Vꢀoutput  
+Vꢀoutput  
+Vꢀoutput  
+ꢀSense  
Top View  
NVM175 models  
without cover or  
chassis  
0Vꢀ(DCꢀreturn) 14 0Vꢀ(DCꢀreturn)  
0Vꢀ(DCꢀreturn) 13 0Vꢀ(DCꢀreturn)  
Doꢀnotꢀconnect 12 0Vꢀ(DCꢀreturn)  
Doꢀnotꢀconnect 11 Doꢀnotꢀconnect  
PIN 5  
PIN 3  
PIN 1  
PIN 11  
PIN 1  
Mating parts (Molex or equivalent)  
Conn  
J1  
J2  
Housing  
39-01-2205  
09-50-8051  
Pins  
44476-3112  
08-52-0113  
122.15  
128.20  
5.25  
Side View  
End View  
127.00  
Bottom View  
NVM175-C & NVM175-U  
Top View  
NVM175-C models  
models  
Notes:  
Input and output connectors are not included with the product.  
They are available from TDK-Lambda  
1. All customer fixings M3  
2. Maximum thread penetration 4.5mm  
3. Maximum torque 0.9Nm  
1 off input connector and 3 crimps part number is 94910.  
1 off output connector and 20 crimps part number is 94668  
4. All tolerances +/-0.5mm  
NVM175_Datasheet_60966 - v14.0  
3
NV-Power NVM-175  
TDK-Lambda France SAS  
TDK-Lambda Americas  
Tel: +1 800-LAMBDA-4 or 1-800-526-2324  
powersolutions@us.tdk-lambda.com  
www.us.lambda.tdk.com  
Tel: +33 1 60 12 71 65  
france@fr.tdk-lambda.com  
www.emea.lambda.tdk.com/fr  
Italy Sales Office  
Tel: +39 02 61 29 38 63  
info.italia@it.tdk-lambda.com  
www.emea.lambda.tdk.com/it  
TDK Electronics do Brasil Ltda  
Tel: +55 11 3289-9599  
sales.br@tdk-electronics.tdk.com  
www.tdk-electronics.tdk.com/en  
Netherlands  
info@nl.tdk-lambda.com  
www.emea.lambda.tdk.com/nl  
TDK-Lambda Germany GmbH  
Tel: +49 7841 666 0  
info.germany@de.tdk-lambda.com  
TDK-Lambda Corporation  
Tel: +81-3-6778-1113  
www.jp.lambda.tdk.com  
www.emea.lambda.tdk.com/de  
TDK-Lambda (China) Electronics Co. Ltd.  
Tel: +86 21 6485-0777  
powersolutions@cn.tdk-lambda.com  
www.lambda.tdk.com.cn  
TDK-Lambda Singapore Pte Ltd.  
Tel: +65 6251 7211  
tls.mkt@sg.tdk-lambda.com  
www.sg.lambda.tdk.com  
Austria Sales Office  
Tel: +43 2256 655 84  
info@at.tdk-lambda.com  
www.emea.lambda.tdk.com/at  
TDK India Private Limited, Power Supply Division  
Switzerland Sales Office  
Tel: +41 44 850 53 53  
info@ch.tdk-lambda.com  
www.emea.lambda.tdk.com/ch  
Tel: +91 80 4039-0660  
mathew.philip@in.tdk-lambda.com  
www.sg.lambda.tdk.com  
Nordic Sales Office  
Tel: +45 8853 8086  
info@dk.tdk-lambda.com  
www.emea.lambda.tdk.com/dk  
TDK-Lambda UK Ltd.  
Tel: +44 (0) 12 71 85 66 66  
powersolutions@uk.tdk-lambda.com  
www.emea.lambda.tdk.com/uk  
TDK-Lambda Ltd.  
Tel: +9 723 902 4333  
info@tdk-lambda.co.il  
www.emea.lambda.tdk.com/il  
C.I.S.  
Commercial Support:  
Tel: +7 (495) 665 2627  
Technical Support:  
Tel: +7 (812) 658 0463  
info@tdk-lambda.ru  
www.emea.lambda.tdk.com/ru  
Forꢀadditionalꢀinformation,ꢀpleaseꢀvisitꢀ  
https://product.tdk.com/en/power  
Errorsꢀandꢀomissionsꢀexcepted  
NVM175_Datasheet_60966 - v14.0  
NV-Power NVM-175  
4

相关型号:

NVM14CD

"MONITOR MONOCHROME 14"""
ETC

NVM3060

4096-Bit EEPROM
ETC

NVMD3P03R2G

双 P 沟道,功率 MOSFET,-30V,-3.05A,85mΩ
ONSEMI

NVMD4N03

Power MOSFET 4 A, 30 V, N−Channel SO−8 Dual
ONSEMI

NVMD4N03R2G

Power MOSFET 4 A, 30 V, N−Channel SO−8 Dual
ONSEMI

NVMD6N03R2

Power MOSFET 30 V, 6 A, Dual N--Channel SOIC--8
ONSEMI

NVMD6N03R2G

Power MOSFET 30 V, 6 A, Dual N--Channel SOIC--8
ONSEMI

NVMD6N04R2G

双 N 沟道,功率 MOSFET,40V,5.8A,34mΩ
ONSEMI

NVMD6P02

Power MOSFET 6 A, 20 V, P−Channel SOIC−8, Dual
ONSEMI

NVMD6P02R2G

Power MOSFET 6 A, 20 V, P−Channel SOIC−8, Dual
ONSEMI

NVMFD020N06CT1G

Power MOSFET Power, N-Channel, DUAL SO8FL, 60 V, 16.3 mΩ, 32 A
ONSEMI

NVMFD024N06CT1G

Power MOSFET, N-Channel, DUAL SO8FL, 60 V, 22.6 mΩ, 24 A
ONSEMI