PFC3819QM-181K09B-50 [TDK]
PFC用扼流圈;型号: | PFC3819QM-181K09B-50 |
厂家: | TDK ELECTRONICS |
描述: | PFC用扼流圈 功率因数校正 |
文件: | 总19页 (文件大小:629K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
January 2014
Choke Coils for PFC
Pin terminal type
PFC
series
PFC3514QM
PFC3318QM
PFC3519QM
PFC3819QM
PFC4124QM
PFC2723ER
PFC3125ER
PFC3525ER
(2/19)
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
○
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
○ Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
○ Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
○ Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
○ Use a wrist band to discharge static electricity in your body through the grounding wire.
○ Do not expose the products to magnets or magnetic fields.
○ Do not use for a purpose outside of the contents regulated in the delivery specifications.
○ The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(8) Public information-processing equipment
(2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment
(3) Medical equipment
(10) Electric heating apparatus, burning equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
transformer_dk1_pfc_en
(3/19)
Choke Coils for PFC
PFC Series
Overview of the PFC Series
■ FEATURES
A low height(15.5 to 27mm in height) is achieved
Large current is achieved in a small shape
○
○
■ APPLICATION
AV equipment, digital consumer electronics
■ PART NUMBER CONSTRUCTION
PFC
3514QM
351
K
07
E
**
-
-
Series name
Core size
Inductance
code
Inductance
tolerance
Rated Peak
current code✽1
Control mark
Control mark
35uH (35x100)
350uH (35x101)
3500uH(35x102)
350
351
352
J
K
L
±5%
±10%
±15%
±20%
01
07
10
1A
7A
10A
M
■ OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight✽4
Operating
temperature✽2
Storage
temperature✽3
Type
(°C)
(°C)
(pieces/box)
(g)
40.0
27.6
50.3
60.5
91.9
34.1
49.7
57.3
PFC3514QM
PFC3318QM
PFC3519QM
PFC3819QM
PFC4124QM
PFC2723ER
PFC3125ER
PFC3525ER
–30 to +120
–30 to +120
–30 to +120
–30 to +120
–30 to +120
–30 to +120
–30 to +120
–30 to +120
–40 to +80
–40 to +80
–40 to +80
–40 to +80
–40 to +80
–40 to +80
–40 to +80
–40 to +80
175
140
140
100
90
150
120
120
✽1 The rounded-off value.
✽2 Operating temperature range includes self-temperature rise.
✽3 The Storage temperature range is for after the circuit board is mounted.
✽4 Typical weight.
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
○
○
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(4/19)
PFC QM series
PFC3514QM Type
■ SHAPE & DIMENSIONS
Dimensions in mm
Type
D
W
H
P1
P2
F
PFC3514QM
30.0max.
37.0max.
15.5max.
7.5
5.0
25.0
■ RECOMMENDED LAND PATTERN
■ CIRCUIT DIAGRAM
5
5
5
5
4
5
6
2
7
8
3
1
Dimensions in mm
7.5 7.5
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(5/19)
PFC QM series
PFC3514QM Type
■ ELECTRICAL CHARACTERISTICS
□
CHARACTERISTICS SPECIFICATION TABLE
Mount method
Frequency
(kHz)min
PFC output
power
(W)
Inductance
(µH)
Rated peek
current✽1
(A)
Turn ratio
(Np/Npd)
Part No.
65
65
65
100
350
280
230
3.7
10.0
9.8
PFC3514QM-351K04B-00
PFC3514QM-281K05B-00
PFC3514QM-231K06B-00
Through hole
Through hole
Through hole
125
150
4.6
5.5
9.6
○ Measurement equipment✽2
Measurement item
Inductance
Product No.
Manufacturer
4284A
Agilent Technologies
Agilent Technologies
DC bias characteristics
4284A + 42841A
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.
✽2 Equivalent measurement equipment may be used.
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH
PFC3514QM-351K04B-00
PFC3514QM-281K05B-00
PFC3514QM-231K06B-00
DC current(A)
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(6/19)
PFC QM series
PFC3318QM Type
■ SHAPE & DIMENSIONS
Dimensions in mm
Type
D
W
H
P1
P2
F
PFC3318QM
28.0max.
35.0max.
20.0max.
7.5
5.0
22.5
■ RECOMMENDED LAND PATTERN
■ CIRCUIT DIAGRAM
5
5
5
5
4
5
6 7
8
3
2
1
Dimensions in mm
7.5 7.5
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(7/19)
PFC QM series
PFC3318QM Type
■ ELECTRICAL CHARACTERISTICS
□
CHARACTERISTICS SPECIFICATION TABLE
Mount method
Frequency
(kHz)min
PFC output
power
(W)
Inductance
(µH)
Rated peek
current✽1
(A)
Turn ratio
(Np/Npd)
Part No.
50
50
50
75
600
600
450
2.8
9.0
9.6
9.0
Through hole
Through hole
Through hole
PFC3318QM-601K03B-00
PFC3318QM-601K03E-00
PFC3318QM-451K04B-00
75
2.8
3.7
100
○ Measurement equipment✽2
Measurement item
Inductance
Product No.
Manufacturer
4284A
Agilent Technologies
Agilent Technologies
DC bias characteristics
4284A + 42841A
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.
✽2 Equivalent measurement equipment may be used.
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH
PFC3318QM-601K03B-00
PFC3318QM-601K03E-00
PFC3318QM-451K04B-00
DC current(A)
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(8/19)
PFC QM series
PFC3519QM Type
■ SHAPE & DIMENSIONS
Dimensions in mm
Type
D
W
H
P1
P2
F
PFC3519QM
30.0max.
37.0max.
20.0max.
7.5
5.0
25.0
■ RECOMMENDED LAND PATTERN
■ CIRCUIT DIAGRAM
5
5
5
5
4
5
6 7
8
3
2
1
Dimensions in mm
7.5 7.5
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(9/19)
PFC QM series
PFC3519QM Type
■ ELECTRICAL CHARACTERISTICS
□
CHARACTERISTICS SPECIFICATION TABLE
Mount method
Frequency
(kHz)min
PFC output
power
(W)
Inductance
(µH)
Rated peek
current✽1
(A)
Turn ratio
(Np/Npd)
Part No.
50
50
50
100
450
300
230
3.7
10
Through hole
Through hole
Through hole
PFC3519QM-451K04E-00
PFC3519QM-301K06B-00
PFC3519QM-231K07B-00
150
200
5.5
7.4
9.8
9.6
○ Measurement equipment✽2
Measurement item
Inductance
Product No.
Manufacturer
4284A
Agilent Technologies
Agilent Technologies
DC bias characteristics
4284A + 42841A
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.
✽2 Equivalent measurement equipment may be used.
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH
PFC3519QM-451K04E-00
PFC3519QM-301K06B-00
PFC3519QM-231K07B-00
DC current(A)
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(10/19)
PFC QM series
PFC3819QM Type
■ SHAPE & DIMENSIONS
Dimensions in mm
Type
D
W
H
P1
P2
F
PFC3819QM
33.5max.
40.0max.
20.0max.
7.5
5.0
28.0
■ RECOMMENDED LAND PATTERN
■ CIRCUIT DIAGRAM
5
5
5
5
4
5
6
7
8
3
2
1
Dimensions in mm
7.5 7.5
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(11/19)
PFC QM series
PFC3819QM Type
■ ELECTRICAL CHARACTERISTICS
□
CHARACTERISTICS SPECIFICATION TABLE
Mount method
Frequency
(kHz)min
PFC output
power
(W)
Inductance
(µH)
Rated peek
current✽1
(A)
Turn ratio
(Np/Npd)
Part No.
50
50
50
50
150
300
230
180
150
5.5
9.8
9.6
9.5
9.8
Through hole
Through hole
Through hole
Through hole
PFC3819QM-301K06E-00
PFC3819QM-231K07D-00
PFC3819QM-181K09B-00
PFC3819QM-151K11B-00
200
250
300
7.4
8.8
11.1
○ Measurement equipment✽2
Measurement item
Inductance
Product No.
Manufacturer
4284A
Agilent Technologies
Agilent Technologies
DC bias characteristics
4284A + 42841A
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.
✽2 Equivalent measurement equipment may be used.
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH
PFC3819QM-301K06E-00
PFC3819QM-231K07D-00
PFC3819QM-181K09B-00
PFC3819QM-151K11B-00
DC current(A)
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(12/19)
PFC QM series
PFC4124QM Type
■ SHAPE & DIMENSIONS
Dimensions in mm
Type
D
W
H
P1
P2
F
PFC4124QM
38.0max.
43.0max.
25.0max.
7.5
5.0
32.0
■ RECOMMENDED LAND PATTERN
■ CIRCUIT DIAGRAM
5
5
5
5
4
5
6
7
8
3
2
1
7.5 7.5
Dimensions in mm
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(13/19)
PFC QM series
PFC4124QM Type
■ ELECTRICAL CHARACTERISTICS
□
CHARACTERISTICS SPECIFICATION TABLE
Mount method
Frequency
(kHz)min
PFC output
power
(W)
Inductance
(µH)
Rated peek
current✽1
(A)
Turn ratio
(Np/Npd)
Part No.
50
50
250
180
150
8.8
9.5
9.8
Through hole
Through hole
PFC4124QM-181K09D-00
PFC4124QM-151K11D-00
300
11.1
○ Measurement equipment✽2
Measurement item
Inductance
Product No.
Manufacturer
4284A
Agilent Technologies
Agilent Technologies
DC bias characteristics
4284A + 42841A
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.
✽2 Equivalent measurement equipment may be used.
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH
PFC4124QM-181K09D-00
PFC4124QM-151K11D-00
DC current(A)
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(14/19)
PFC ER series
PFC2723ER Type
■ SHAPE & DIMENSIONS
Dimensions in mm
Type
D
W
H
P1
P2
F
PFC2723ER
25.0max.
28.0max.
25.0max.
20.0
10.0
20.0
■ RECOMMENDED LAND PATTERN
■ CIRCUIT DIAGRAM
10
10
3
4
5
1
2
Dimensions in mm
20
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(15/19)
PFC ER series
PFC2723ER Type
■ ELECTRICAL CHARACTERISTICS
□
CHARACTERISTICS SPECIFICATION TABLE
Mount method
Frequency
(kHz)min
PFC output
power
(W)
Inductance
(µH)
Rated peek
current✽1
(A)
Turn ratio
(Np/Npd)
Part No.
50
50
75
600
420
2.4
9.8
Through hole
Through hole
PFC2723ER-601K02B-00
PFC2723ER-421K03B-00
100
3.4
10.8
○ Measurement equipment✽2
Measurement item
Inductance
Product No.
Manufacturer
4284A
Agilent Technologies
Agilent Technologies
DC bias characteristics
4284A + 42841A
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.
✽2 Equivalent measurement equipment may be used.
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH
DC current(A)
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(16/19)
PFC ER series
PFC3125ER Type
■ SHAPE & DIMENSIONS
Dimensions in mm
Type
D
W
H
P1
P2
P3
P4
F
PFC3125ER 26.0max. 33.0max. 27.0max. 9.5
3.5
16.5
6.5
21.0
■ RECOMMENDED LAND PATTERN
■ CIRCUIT DIAGRAM
9.5
16.5
3.5
13
6
5
7
8
1
4
3
2
6.5 6.5 6.5 6.5
Dimensions in mm
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(17/19)
PFC ER series
PFC3125ER Type
■ ELECTRICAL CHARACTERISTICS
□
CHARACTERISTICS SPECIFICATION TABLE
Mount method
Frequency
(kHz)min
PFC output
power
(W)
Inductance
(µH)
Rated peek
current✽1
(A)
Turn ratio
(Np/Npd)
Part No.
50
50
50
100
450
300
230
2.7
10.0
10.4
9.0
Through hole
Through hole
Through hole
PFC3125ER-451K03E-00
PFC3125ER-301K05B-00
PFC3125ER-231K06B-00
150
200
4.9
6.4
○ Measurement equipment✽2
Measurement item
Inductance
Product No.
Manufacturer
4284A
Agilent Technologies
Agilent Technologies
DC bias characteristics
4284A + 42841A
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.
✽2 Equivalent measurement equipment may be used.
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH
DC current(A)
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(18/19)
PFC ER series
PFC3525ER Type
■ SHAPE & DIMENSIONS
Dimensions in mm
Type
D
W
H
P1
P2
P3
P4
F
PFC3525ER 27.5max. 37.0max. 27.0max. 9.5
3.5
16.5
6.5
22.0
■ RECOMMENDED LAND PATTERN
■ CIRCUIT DIAGRAM
9.5
16.5
3.5
13
6
5
7
8
1
4
3
2
6.5 6.5 6.5 6.5
Dimensions in mm
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
(19/19)
PFC ER series
PFC3525ER Type
■ ELECTRICAL CHARACTERISTICS
□
CHARACTERISTICS SPECIFICATION TABLE
Mount method
Frequency
(kHz)min
PFC output
power
(W)
Inductance
(µH)
Rated peek
current✽1
(A)
Turn ratio
(Np/Npd)
Part No.
50
50
50
150
300
225
180
4.1
10.4
10.0
10.5
Through hole
Through hole
Through hole
PFC3525ER-301K04E-00
PFC3525ER-231K06E-00
PFC3525ER-181K09B-00
200
250
5.6
9.5
○ Measurement equipment✽2
Measurement item
Inductance
Product No.
Manufacturer
4284A
Agilent Technologies
Agilent Technologies
DC bias characteristics
4284A + 42841A
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.
✽2 Equivalent measurement equipment may be used.
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH
DC current(A)
· All specifications are subject to change without notice.
transformer_dk1_pfc_en
相关型号:
PFC3819QM-231K07D-00
General Purpose Inductor, 230uH, 10%, 2 Element, Ferrite-Core, ROHS COMPLIANT
TDK
PFC3819QM-301K06E-00
General Purpose Inductor, 300uH, 10%, 2 Element, Ferrite-Core, ROHS COMPLIANT
TDK
©2020 ICPDF网 联系我们和版权申明