SLF7055T-150M2R1-3PF [TDK]
Inductors for Power Circuits Wound Ferrite SLFseries; 电感器的电源电路伤口铁氧体SLFseries
| 型号： | SLF7055T-150M2R1-3PF |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Inductors for Power Circuits Wound Ferrite SLFseries |
| 文件： | 总49页 (文件大小：7182K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
I
N
D
U
C
T
O
R
S
May 2013
Inductors for Power Circuits
Wound Ferrite
SLFseries
SLF6025
SLF6028
SLF6045
SLF7032
SLF7045
SLF7055
SLF10145
SLF10165
SLF12555
SLF12565
SLF12575
(1/48)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 30°C, Humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20130516 / e531_slf.
(2/48)
I
N
D
U
C
T
O
R
S
Product compatible with RoHS directive
Compatible with lead-free solders
Inductors for Power Circuits
Wound Ferrite
Overview of the SLF Series
FEATURES
Magnetic shield type wound inductor for power circuits.
Product lineup allows for various usages.
APPLICATION
Thin-screen TV, LCDs, AV equipment, gaming equipment, other electrical devices
PART NUMBER CONSTRUCTION
SLF
6025
T
-
4R7
M
1R5
-
PF
L×W×H Dimensions
(mm)
Inductance
(µH)
Rated current
(A)
Inductance
tolerance
Series name
Packaging style
Internal code
6025
6028
6045
7032
7045
7055
6.0×6.0×2.5
6.0×6.0×2.8
6.0×6.0×4.5
7.0×7.0×3.2
7.0×7.0×4.5
7.0×7.0×5.5
T
Taping
1R0
100
101
1.0
10
100
M
N
20%
30%
R47
2R2
150
0.47
2.2
15
10145 10.1×10.1×4.5
10165 10.1×10.1×6.8
12555 12.5×12.5×5.5
12565 12.5×12.5×6.5
12575 12.5×12.5×7.5
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight
Operating
temperature
Storage
temperature
Type
(pieces/reel)
1000
1000
1000
1000
1000
1000
500
（°C）
（°C）
（g）
0.3
0.3
0.4
0.4
0.6
0.8
1.3
1.9
2.6
3.2
3.6
SLF6025
SLF6028
SLF6045
SLF7032
SLF7045
SLF7055
SLF10145
SLF10165
SLF12555
SLF12565
SLF12575
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
–40 to +105
500
500
500
500
Operating temperature range includes self-temperature rise.
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(3/48)
I
N
D
U
C
T
O
R
S
Overview of the SLF Series
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
30s
Time
t3
5s
T2
180°C
150°C
230°C
250°C
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(4/48)
I
N
D
U
C
T
O
R
S
SLF series
SLF6025 Type
SHAPE & DIMENSIONS
6
0.2
0.9
4
0.9
Dimensions in mm
RECOMMENDED LAND PATTERN
Dimensions in mm
1.5
4
1.5
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(5/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF6025 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current(A)
max.
L measuring
frequency
L
DC resistance
() 20%
Part No.
(kHz)
100
100
100
100
100
100
100
100
100
(µH)
Tolerance
20%
20%
20%
20%
20%
20%
20%
20%
Idc1
1.5
Idc2
1.8
4.7
6.8
10
15
22
33
47
68
100
0.0306
0.0442
0.0573
0.085
0.122
0.18
0.24
0.37
0.5
SLF6025T-4R7M1R5-PF
SLF6025T-6R8M1R3-PF
SLF6025T-100M1R0-PF
SLF6025T-150MR88-PF
SLF6025T-220MR73-PF
SLF6025T-330MR59-PF
SLF6025T-470MR48-PF
SLF6025T-680MR42-PF
SLF6025T-101MR33-PF
1.3
1.5
1
1.3
0.88
0.73
0.59
0.48
0.42
0.33
1.1
0.94
0.79
0.67
0.54
0.47
20%
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (30% below the nominal value)
Idc2: When based on the temperature increase (Temperature increase of 25°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
L
4194A
VP-2941A
4284A+42841A+42842C
Agilent Technologies
Panasonic
Agilent Technologies
DC resistance
Rated current Idc1
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(6/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF6025 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
1000
101M
680M
470M
330M
100
10
1
220M
150M
100M
6R8M
4R7M
1
10
100
1000
10000
100000
1000000
(
)
Frequency kHz
○ Measurement equipment
Product No.
4294A
Manufacturer
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(7/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF6025 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
1000
300
100
30
330M
220M
150M
10
100M
6R8M
4R7M
3
1
0.1
0.3
1
3
10
( )
DC current A
○ Measurement equipment
Product No.
4284A+42841A+42842C
Manufacturer
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(8/48)
I
N
D
U
C
T
O
R
S
SLF series
SLF6028 Type
SHAPE & DIMENSIONS
6
0.2
0.9
4
0.9
Dimensions in mm
RECOMMENDED LAND PATTERN
Dimensions in mm
1.5
4
1.5
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(9/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF6028 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current(A)
max.
L measuring
frequency
L
DC resistance
() 20%
Part No.
(kHz)
100
100
100
100
100
100
100
100
100
100
100
(µH)
tolerance
20%
20%
20%
20%
20%
20%
20%
20%
Idc1
1.6
Idc2
2.5
4.7
6.8
10
15
22
33
47
68
0.0284
0.0354
0.0532
0.0745
0.104
0.148
0.21
0.29
0.43
0.65
0.98
SLF6028T-4R7M1R6-PF
SLF6028T-6R8M1R5-PF
SLF6028T-100M1R3-PF
SLF6028T-150M1R0-PF
SLF6028T-220MR77-PF
SLF6028T-330MR69-PF
SLF6028T-470MR59-PF
SLF6028T-680MR50-PF
SLF6028T-101MR42-PF
SLF6028T-151MR34-PF
SLF6028T-221MR26-PF
1.5
2.2
1.3
1.8
1
1.4
0.77
0.69
0.59
0.5
0.42
0.34
0.26
1.3
1.1
0.92
0.78
0.64
0.5
100
150
220
20%
20%
20%
0.38
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (30% below the nominal value)
Idc2: When based on the temperature increase (Temperature increase of 25°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
L
4194A
VP-2941A
4284A+42841A+42842C
Agilent Technologies
Panasonic
Agilent Technologies
DC resistance
Rated current Idc1
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(10/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF6028 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
1000
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
1
1
10
100
1000
10000
100000
1000000
(
)
Frequency kHz
○ Measurement equipment
Product No.
4294A
Manufacturer
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(11/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF6028 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
1000
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
1
0.0
0.5
1.0
1.5
2.0
2.5
( )
DC current A
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(12/48)
I
N
D
U
C
T
O
R
S
SLF series
SLF6045 Type
SHAPE & DIMENSIONS
6
0.2
0.9
4
0.9
Dimensions in mm
RECOMMENDED LAND PATTERN
1.5
4
1.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(13/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF6045 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current(A)
L measuring
frequency
L
DC resistance
(m )
Part No.
max.
Idc1
4
3.3
2.8
2.4
2
1.6
1.3
1.1
(kHz)
100
100
100
100
100
100
100
100
(µH)
1.5
2.2
3.3
4.7
6.8
10
Tolerance
30%
30%
30%
30%
30%
20%
20%
20%
Idc2
4.1
3.8
3.4
3.2
2.8
2.7
2.'2
1.8
16 30%
18 30%
21.5 30%
26.5 30%
33 30%
39 20%
59.5 20%
82 20%
SLF6045T-1R5N4R0-3PF
SLF6045T-2R2N3R3-3PF
SLF6045T-3R3N2R8-3PF
SLF6045T-4R7N2R4-3PF
SLF6045T-6R8N2R0-3PF
SLF6045T-100M1R6-3PF
SLF6045T-150M1R3-3PF
SLF6045T-220M1R1-3PF
15
22
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
L
4194A
VP-2941A
4284A+42841A+42842C
Agilent Technologies
Panasonic
Agilent Technologies
DC resistance
Rated current Idc1
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(14/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF6045 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
1000
100
220M
150M
100M
10
6R8N
4R7N
3R3N
2R2N
1R5N
1
1
10
100
1000
Frequency MHz
10000
)
100000
1000000
10000000
(
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(15/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF6045 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
100
220M
150M
10
100M
6R8N
4R7N
3R3N
2R2N
1R5N
1
0
2
4
6
8
( )
DC current A
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(16/48)
I
N
D
U
C
T
O
R
S
SLF series
SLF7032 Type
SHAPE & DIMENSIONS
7
0.2
0.9
4.9
0.9
Dimensions in mm
RECOMMENDED LAND PATTERN
1.5
1.5
4.8
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(17/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF7032 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L measuring
L
DC resistance
Rated current(A)
max.
frequency
(kHz)
100
Part No.
() 20%
(µH)
Tolerance
3.3
4.7
6.8
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
0.023
0.030
0.041
0.053
0.075
0.11
0.16
0.24
0.31
0.45
0.65
1.05
1.67
2.05
3.15
4.78
1.9
1.7
1.6
1.4
SLF7032T-3R3M1R9-2PF
SLF7032T-4R7M1R7-2PF
SLF7032T-6R8M1R6-2PF
SLF7032T-100M1R4-2PF
SLF7032T-150M1R1-2PF
SLF7032T-220MR96-2PF
SLF7032T-330MR75-2PF
SLF7032T-470MR67-2PF
SLF7032T-680MR59-2PF
SLF7032T-101MR45-2PF
SLF7032T-151MR37-2PF
SLF7032T-221MR29-2PF
SLF7032T-331MR22-2PF
SLF7032T-471MR20-2PF
SLF7032T-681MR16-2PF
SLF7032T-102MR13-2PF
100
100
10
100
15
22
33
47
68
100
100
100
100
1.1
0.96
0.75
0.67
0.59
0.45
0.37
0.29
0.22
0.2
100
100
150
220
330
470
680
1000
100
100
100
100
100
100
100
0.16
0.13
○ Measurement equipment
Measurement item
L
Product No.
4194A
VP-2941A
Manufacturer
Agilent Technologies
Panasonic
DC resistance
Rated current Idc1
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(18/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF7032 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
100000
10000
1000
102M
681M
471M
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
3R3M
1
1
10
100
1000
10000
(
)
Frequency kHz
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(19/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF7032 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
10000
1000
102M
681M
471M
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
3R3M
1
0
0.5
1
1.5
DC current A
2
2.5
3
( )
○ Measurement equipment
Product No.
4284A+42841A+42842C
Manufacturer
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(20/48)
I
N
D
U
C
T
O
R
S
SLF series
SLF7045 Type
SHAPE & DIMENSIONS
7
0.2
0.9
4.9
0.9
Dimensions in mm
RECOMMENDED LAND PATTERN
1.5
1.5
4.8
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(21/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF7045 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current(A)
max.
L measuring
frequency
L
DC resistance
() 20%
Part No.
(kHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
(µH)
Tolerance
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
Idc1
2.5
Idc2
2.3
3.3
4.7
6.8
10
15
22
33
47
68
0.02
0.03
SLF7045T-3R3M2R5-PF
SLF7045T-4R7M2R0-PF
SLF7045T-6R8M1R7-PF
SLF7045T-100M1R3-PF
SLF7045T-150M1R1-PF
SLF7045T-220MR90-PF
SLF7045T-330MR82-PF
SLF7045T-470MR75-PF
SLF7045T-680MR60-PF
SLF7045T-101MR50-PF
SLF7045T-151MR40-PF
SLF7045T-221MR33-PF
SLF7045T-331MR25-PF
SLF7045T-471MR22-PF
SLF7045T-681MR20-PF
SLF7045T-102MR14-PF
2
2.1
0.039
0.036
0.052
0.061
0.096
0.125
0.175
0.25
0.34
0.52
0.74
1.05
1.7
1.3
1.1
0.9
0.82
0.75
0.6
0.5
0.4
0.33
0.25
0.22
0.2
1.74
1.78
1.53
1.34
1.09
0.92
0.77
0.65
0.55
0.45
0.37
0.31
0.27
0.25
100
150
220
330
470
680
1000
1.48
2.28
0.14
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 20°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
L
4194A
VP-2941A
4284A+42841A+42842C
Agilent Technologies
Panasonic
Agilent Technologies
DC resistance
Rated current Idc1
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(22/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF7045 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
10000
1000
102M
681M
471M
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
3R3M
1
1
10
100
1000
10000
100000
1000000
(
)
Frequency kHz
○ Measurement equipment
Product No.
4294A
Manufacturer
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(23/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF7045 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
10000
1000
102M
681M
471M
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
3R3M
1
0
1
2
3
( )
DC current A
○ Measurement equipment
Product No.
4284A+42841A+42842C
Manufacturer
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(24/48)
I
N
D
U
C
T
O
R
S
SLF series
SLF7055 Type
SHAPE & DIMENSIONS
7
0.2
0.9
4.9
0.9
Dimensions in mm
RECOMMENDED LAND PATTERN
1.5
1.5
4.8
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(25/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF7055 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current(A)
L measuring
frequency
L
DC resistance
(m)
Part No.
max.
Idc1
6.2
5.3
4.3
3.6
3
2.6
2.1
1.7
(kHz)
100
100
100
100
100
100
100
100
(µH)
1.5
2.2
3.3
4.7
6.8
10
Tolerance
30%
30%
30%
30%
30%
20%
20%
20%
Idc2
4
17.4 30%
21.7 30%
24 30%
28 30%
34 30%
39.1 20%
50.8 20%
64.3 20%
SLF7055T-1R5N4R0-3PF
SLF7055T-2R2N3R5-3PF
SLF7055T-3R3N3R3-3PF
SLF7055T-4R7N3R1-3PF
SLF7055T-6R8N2R8-3PF
SLF7055T-100M2R5-3PF
SLF7055T-150M2R1-3PF
SLF7055T-220M1R7-3PF
3.5
3.3
3.1
2.8
2.5
2.2
2
15
22
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
L
4194A
VP-2941A
4284A+42841A+42842C
Agilent Technologies
Panasonic
Agilent Technologies
DC resistance
Rated current Idc1
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(26/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF7055 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
1000
100
220M
150M
100M
6R8M
10
4R7N
3R3N
2R2N
1R5N
1
1
10
100
1000
10000
100000
1000000
(
)
Frequency MHz
○ Measurement equipment
Product No.
4294A
Manufacturer
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(27/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF7055 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
100
220M
150M
10
100M
6R8M
4R7N
3R3N
2R2N
1R5N
1
0
1
2
3
4
5
6
( )
DC current A
○ Measurement equipment
Product No.
4284A+42841A+42842C
Manufacturer
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(28/48)
I
N
D
U
C
T
O
R
S
SLF series
SLF10145 Type
SHAPE & DIMENSIONS
10.1 0.3
100
2
6.1
2
Dimensions in mm
RECOMMENDED LAND PATTERN
2.5
5.6
2.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(29/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF10145 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current(A)
max.
L measuring
frequency
(kHz)
L
DC resistance
() 20%
Part No.
(µH)
Tolerance
30%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
Idc1
4.9
Idc2
3.7
3.3
5.6
10
15
22
33
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.0161
0.0220
0.0364
0.0472
0.0591
0.0815
0.1
0.14
0.2
0.35
0.47
SLF10145T-3R3N3R7-PF
SLF10145T-5R6M3R2-PF
SLF10145T-100M2R5-PF
SLF10145T-150M2R2-PF
SLF10145T-220M1R9-PF
SLF10145T-330M1R6-PF
SLF10145T-470M1R4-PF
SLF10145T-680M1R2-PF
SLF10145T-101M1R0-PF
SLF10145T-151MR79-PF
SLF10145T-221MR65-PF
SLF10145T-331MR54-PF
SLF10145T-471MR47-PF
SLF10145T-681MR38-PF
SLF10145T-102MR29-PF
SLF10145T-152MR22-PF
3.8
3.2
3
2.5
2.4
2.2
2.1
1.9
1.6
1.7
47
68
1.4
1.5
1.2
1.3
100
150
220
330
470
680
1000
1500
1
1.1
0.79
0.65
0.54
0.47
0.38
0.32
0.22
0.81
0.7
0.68
1.03
1.6
2.8
0.58
0.47
0.38
0.29
0.26
3.4
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
L
4194A
VP-2941A
4284A+42841A+42842C
Agilent Technologies
Panasonic
Agilent Technologies
DC resistance
Rated current Idc1
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(30/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF10145 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
100000
10000
152M
1000
102M
681M
471M
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
5R6M
3R3N
1
1
10
100
1000
10000
100000
(
)
Frequency kHz
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(31/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF10145 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
10000
152M
1000
102M
681M
471M
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
5R6M
3R3N
1
0
1
2
3
4
( )
DC current A
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(32/48)
I
N
D
U
C
T
O
R
S
SLF series
SLF10165 Type
SHAPE & DIMENSIONS
10.1 0.3
100
2
6.1
2
Dimensions in mm
RECOMMENDED LAND PATTERN
2.5
5.6
2.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(33/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF10165 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current(A)
L measuring
frequency
L
DC resistance
(m)
Part No.
max.
Idc1
10.7
8.9
7.8
6.1
4.6
4.1
3.1
2.7
(kHz)
100
100
100
100
100
100
100
100
(µH)
1.5
2.2
3.3
4.7
6.8
10
Tolerance
30%
30%
30%
30%
30%
20%
20%
20%
Idc2
6.8
6.3
5.8
4.7
4.3
3.8
3.1
2.4
6.7 30%
8.4 30%
9.6 30%
11.7 30%
14 30%
18.5 20%
27 20%
44.8 20%
SLF10165T-1R5N6R83PF
SLF10165T-2R2N6R33PF
SLF10165T-3R3N5R83PF
SLF10165T-4R7N4R73PF
SLF10165T-6R8N4R33PF
SLF10165T-100M3R83PF
SLF10165T-150M3R13PF
SLF10165T-220M2R43PF
15
22
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
L
4194A
VP-2941A
4284A+42841A+42842C
Agilent Technologies
Panasonic
Agilent Technologies
DC resistance
Rated current Idc1
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(34/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF10165 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
1000
100
10
0
150M
100M
220M
6R8M
4R7N
3R3N
2R2N
1R5N
1
10
100
1000
10000
100000
(
)
Frequency MHz
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(35/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF10165 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
1000
100
220M
150M
10
100M
6R8N
4R7N
3R3N
2R2N
1R5N
1
0
5
10
( )
DC current A
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(36/48)
I
N
D
U
C
T
O
R
S
SLF series
SLF12555 Type
SHAPE & DIMENSIONS
12.5 0.3
100
2
8.5
2
Dimensions in mm
RECOMMENDED LAND PATTERN
2.6
8.5
2.6
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(37/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF12555 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current(A)
max.
L measuring
frequency
(kHz)
L
DC resistance
() 20%
Part No.
(µH)
Tolerance
30%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
Idc1
3.6
3.4
2.8
2.3
1.9
1.6
1.3
1.1
0.88
0.72
0.59
0.49
0.43
0.34
0.29
Idc2
6
10
15
22
33
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.0164
0.0215
0.0259
0.0338
0.0415
0.0618
0.0832
0.117
0.19
0.27
0.41
0.52
0.76
4.9
4.3
3.9
3.4
3.1
2.5
2.2
1.8
1.4
1.2
1
SLF12555T-6R0N3R6-PF
SLF12555T-100M3R4-PF
SLF12555T-150M2R8-PF
SLF12555T-220M2R3-PF
SLF12555T-330M1R9-PF
SLF12555T-470M1R6-PF
SLF12555T-680M1R3-PF
SLF12555T-101M1R1-PF
SLF12555T-151MR88-PF
SLF12555T-221MR72-PF
SLF12555T-331MR59-PF
SLF12555T-471MR49-PF
SLF12555T-681MR43-PF
SLF12555T-102MR34-PF
SLF12555T-152MR29-PF
47
68
100
150
220
330
470
680
1000
1500
0.88
0.73
0.6
0.48
1.12
1.73
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
L
4194A
VP-2941A
4284A+42841A+42842C
Agilent Technologies
Panasonic
Agilent Technologies
DC resistance
Rated current Idc1
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(38/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF12555 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
100000
10000
152M
1000
102M
681M
471M
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R0N
1
1
10
100
1000
10000
100000
(
)
Frequency kHz
○ Measurement equipment
Product No.
4294A
Manufacturer
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(39/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF12555 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
10000
152M
1000
102M
681M
471M
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R0N
1
0
1
2
3
4
( )
DC current A
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(40/48)
I
N
D
U
C
T
O
R
S
SLF series
SLF12565 Type
SHAPE & DIMENSIONS
12.5 0.3
100
2
8.5
2
Dimensions in mm
RECOMMENDED LAND PATTERN
2.6
8.5
2.6
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(41/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF12565 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current(A)
max.
L measuring
frequency
(kHz)
L
DC resistance
() 20%
Part No.
(µH)
Tolerance
30%
30%
30%
20%
20%
20%
20%
20%
Idc1
10
7.3
5.7
5
Idc2
2
4.2
1
1
1
1
1
1
1
1
1
1
1
0.0117
0.015
6.2
5.5
5
SLF12565T-2R0N6R2-PF
SLF12565T-4R2N5R5-PF
SLF12565T-7R0N5R0-PF
SLF12565T-100M4R8-PF
SLF12565T-150M4R2-PF
SLF12565T-220M3R5-PF
SLF12565T-330M2R8-PF
SLF12565T-470M2R4-PF
SLF12565T-680M2R0-PF
SLF12565T-101M1R6-PF
SLF12565T-221M1R0-PF
7
10
15
22
33
47
68
100
220
0.0177
0.0202
0.0237
0.0316
0.0406
0.0578
0.0787
0.123
4.8
4.4
3.8
3.4
2.8
2.4
1.9
1.2
4.2
3.5
2.8
2.4
2
20%
20%
20%
1.6
1
0.273
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
L
4194A
VP-2941A
4284A+42841A+42842C
Agilent Technologies
Panasonic
Agilent Technologies
DC resistance
Rated current Idc1
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(42/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF12565 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
10000
1000
221M
100
101M
680M
470M
330M
220M
150M
10
100N
7R0N
4R2N
2R0N
1
1
10
100
1000
10000
100000
(
)
Frequency kHz
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(43/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF12565 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
1000
221M
100
101M
680M
470M
330M
220M
150M
10
100N
7R0N
4R2N
2R0N
1
0
2
4
6
8
10
( )
DC current A
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(44/48)
I
N
D
U
C
T
O
R
S
SLF series
SLF12575 Type
SHAPE & DIMENSIONS
12.5 0.3
100
2
8.5
2
Dimensions in mm
RECOMMENDED LAND PATTERN
2.6
8.5
2.6
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(45/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF12575 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current(A)
max.
L measuring
frequency
(kHz)
L
DC resistance
() 20%
Part No.
(µH)
Tolerance
30%
30%
30%
30%
30%
20%
20%
20%
20%
20%
20%
20%
20%
20%
Idc1
13
10
Idc2
8.2
7
1.2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.0069
0.0094
0.0104
0.0116
0.0131
0.0156
0.0184
0.0263
0.0395
0.0528
0.0778
0.125
SLF12575T-1R2N8R2-PF
SLF12575T-2R7N7R0-PF
SLF12575T-3R9N6R7-PF
SLF12575T-5R6N6R3-PF
SLF12575T-6R8N5R9-PF
SLF12575T-100M5R4-PF
SLF12575T-150M4R7-PF
SLF12575T-220M4R0-PF
SLF12575T-330M3R2-PF
SLF12575T-470M2R7-PF
SLF12575T-680M2R0-PF
SLF12575T-101M1R9-PF
SLF12575T-151M1R5-PF
SLF12575T-221M1R3-PF
2.7
3.9
5.6
6.8
9
6.7
6.3
5.9
5.4
5
7.8
7.2
5.5
4.7
4
10
15
22
33
47
4
3.2
2.7
2
1.9
1.5
1.3
3.4
3
2.4
1.9
1.6
1.3
68
100
150
220
0.175
0.258
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
L
4194A
VP-2941A
4284A+42841A+42842C
Agilent Technologies
Panasonic
Agilent Technologies
DC resistance
Rated current Idc1
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(46/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF12575 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
10000
1000
221M
151M
101M
100
10
1
680M
470M
330M
220M
150M
100M
6R8N
5R6N
3R9N
2R7N
1R2N
1
10
100
1000
10000
100000
(
)
Frequency kHz
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(47/48)
I
N
D
U
C
T
O
R
S
SLF seriesꢀ
SLF12575 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
1000
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R8N
5R6N
3R9N
2R7N
1R2N
1
0
2
4
6
8
10
12
( )
DC current A
○ Measurement equipment
Product No.
4284A+42841A+42842C
Manufacturer
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
(48/48)
I
N
D
U
C
T
O
R
S
SLFseries
Packaging Style
REEL DIMENSIONS
2.0 0.5
B
Type
A
B
C
D
E
2
2
2
2
2
2
2
2
2
2
2
SLF6025
SLF6028
SLF6045
SLF7032
SLF7045
SLF7055
SLF10145
SLF10165
SLF12555
SLF12565
SLF12575
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
22.4
22.4
22.4
22.4
22.4
22.4
30.4
30.4
30.4
30.4
30.4
ø50
ø50
ø50
ø50
ø50
ø50
ø50
ø50
ø50
ø50
ø50
16.4
16.4
16.4
16.4
16.4
16.4
24.4
24.4
24.4
24.4
24.4
(
)
1.0
* These values are typical values.
E
ø13.0 0.5
ø21.0 0.8
D
A
Dimensions in mm
TAPE DIMENSIONS
øD0
P2
P0
P1
K
t
Dimensions in mm
A0
Type
A0
B0
øD0
E
F
P0
P1
P2
W
K
t
SLF6025 6.4
SLF6028 6.4
SLF6045 6.4
SLF7032 7.4
SLF7045 7.4
SLF7055 7.4
6.4 1.5+0.1/-0 1.75 0.1 7.5 0.1 4.0 0.1 12.0 0.1 2.0 0.05 16.0 0.3 3.1
6.4 1.5+0.1/-0 1.75 0.1 7.5 0.1 4.0 0.1 12.0 0.1 2.0 0.05 16.0 0.3 3.1
6.4 1.5+0.1/-0 1.75 0.1 7.5 0.1 4.0 0.1 12.0 0.1 2.0 0.05 16.0 0.3 4.9
7.6 1.5+0.1/-0 1.75 0.1 7.5 0.1 4.0 0.1 12.0 0.1 2.0 0.05 16.0 0.3 3.6
7.6 1.5+0.1/-0 1.75 0.1 7.5 0.1 4.0 0.1 12.0 0.1 2.0 0.05 16.0 0.3 4.8
7.6 1.5+0.1/-0 1.75 0.1 7.5 0.1 4.0 0.1 12.0 0.1 2.0 0.05 16.0 0.3 5.5
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
SLF10145 10.5 10.5 1.5+0.1/-0 1.75 0.1 11.5 0.1 4.0 0.1 16.0 0.1 2.0 0.05 24.0 0.3 5.0
SLF10165 10.5 10.5 1.5+0.1/-0 1.75 0.1 11.5 0.1 4.0 0.1 16.0 0.1 2.0 0.05 24.0 0.3 7.1
SLF12555 13
SLF12565 13
SLF12575 13
13
13
13
1.5+0.1/-0 1.75 0.1 11.5 0.1 4.0 0.1 16.0 0.1 2.0 0.05 24.0 0.3 6.0
1.5+0.1/-0 1.75 0.1 11.5 0.1 4.0 0.1 16.0 0.1 2.0 0.05 24.0 0.3 7.0 0.34
1.5+0.1/-0 1.75 0.1 11.5 0.1 4.0 0.1 16.0 0.1 2.0 0.05 24.0 0.3 8.0 0.34
• All specifications are subject to change without notice.
001-01 / 20130516 / e531_slf.
相关型号：
©2020 ICPDF网 联系我们和版权申明