TCM0906C-400-3P-T200 [TDK]
Data Line Filter,;
| 型号： | TCM0906C-400-3P-T200 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Data Line Filter, LTE |
| 文件： | 总4页 (文件大小：220K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
E M C C o m p o n e n t s
Common mode filters
High-speed signal line (MIPI C-PHY)
TCM-C series
Cl
Br
Pb
REACH Halogen
Free
Lead
Free
RoHS
SVHC-Free
TCM0906C type
FEATURES
This product is a thin-film common-mode filter compatible with the MIPI C-PHY used as an interface for cameras or displays installed in
mobile terminals.
By ensuring common mode impedance, the signal transmission characteristics of each line are balanced while exerting a high noise
suppression effect, and this has little effect on high-speed transmission signals.
0906 (0.875×0.650×0.300mm, dimensional tolerance 0.05mm), small thin film common mode filter with three lines
Operating temperature range: –25 to +85°C (including self-temperature rise)
APPLICATION
Anti-noise measures for high-speed differential transmission lines (MIPI C-PHY) for mobile devices such as smart phones and tablet ter-
minals
Application guides: Smart phones/tablets
PART NUMBER CONSTRUCTION
TCM
0906
C
-
400
-
3P
-
T
200
L×W×T dimensions
0.875×0.65×0.4 mm
Product
internal code
Impedance
() at 100MHz
Number of
lines
Internal
code
Series name
Packaging style
CHARACTERISTICS SPECIFICATION TABLE
Common mode
attenuation
DC resistance
Cutoff
frequency
Common mode Rated
Rated
voltage
Insulation
resistance
Part No.
impedance
[100MHz]
()typ.
current
[1 line]
()
(dB)
(GHz)typ.
(mA)
(V)
(M)min.
Line1 : 3.0+/–30%
Line2 : 2.2+/–30%
Line3 : 3.0+/–30%
18 min: @800M to 1.0GHz
20 min: @1.0G to 1.6GHz
5.0
40
100
5
10
TCM0906C-400-3P-T200
Measurement equipment
Measurement item
Common mode attenuation
DC resistance
Product No.
E5071B
4338A
Manufacturer
Keysight Technologies
Keysight Technologies
Keysight Technologies
Insulation resistance
4339A
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/4)
20181101
cmf_commercial_signal_tcm0906c_en.
E M C C o m p o n e n t s
TCM0906C type
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
0
400 Differential mode
Line2-3
400 Differential mode
Line1-2
–5
400 Differential mode
Line1-3
–10
400 Common mode
–15
–20
–25
–30
–35
1
10
100
1000
10000
(
)
Frequency MHz
Measurement equipment
Product No.
E5071B
Manufacturer
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/4)
20181101
cmf_commercial_signal_tcm0906c_en.
E M C C o m p o n e n t s
TCM0906C type
SHAPE & DIMENSIONS
PACKAGING STYLE
REEL DIMENSIONS
2.0 0.5
0.65 0.05
1
2
3
6
5
4
E
1.0
0.15 0.04
9+0.3
ø13 0.2
ø21 0.8
+0
13+1.4
Dimensions in mm
ø180
–3
Dimensions in mm
RECOMMENDED LAND PATTERN
TAPE DIMENSIONS
0.90
1
2
3
6
5
4
Sprocket
hole
2.0 0.5
4.0 0.1
+0.1
1.5
–0.0
0.35
0.275
Dimensions in mm
K
A
Cavity
2.0 0.5
Dimensions in mm
CIRCUIT DIAGRAM
Type
A
B
K
TCM0906C
0.96
0.74
0.50
1
6
5
4
2
3
160min.
Taping
200min.
• No directionality
300min.
Drawing direction
RECOMMENDED REFLOW PROFILE
Dimensions in mm
Preheating
Soldering
Natural
cooling
PACKAGE QUANTITY
Package quantity
10,000 pcs/reel
Peak
245°C
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
230°C
230°C
Operating
temperature range
–25 to +85 °C
Operating temperature range includes self-temperature rise.
The storage temperature range is for after the assembly.
Storage
temperature range
–25 to +85 °C
Individual
weight
1.4 mg
180°C
5s max.
150°C
60 to 120s
10 to 30s
Time
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/4)
20181101
cmf_commercial_signal_tcm0906c_en.
E M C C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is less than 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 20 to 70% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(8) Public information-processing equipment
(9) Military equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipmentꢀꢀ
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/4)
20181101
cmf_commercial_signal_tcm0906c_en.
相关型号：
©2020 ICPDF网 联系我们和版权申明