TLA-7T201LF-T [TDK]
Pulse transformers; 脉冲变压器
| 型号： | TLA-7T201LF-T |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Pulse transformers |
| 文件： | 总34页 (文件大小：412K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Pulse transformers
TLA /ALT series
Issue date:
April 2012
• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PULSE TRANSFORMERS
TLA/ALT SERIES
Contents
Page
Pulse Transformers/Pin Terminal Type
TLA-3T101LF(-T) 10BASE-2/5/T .....................................................2
TLA-3T106LF(-T) 10BASE-T............................................................4
TLA-3T107LF(-T) 10BASE-T............................................................4
TLA-3T105LF(-T) 10BASE-T............................................................6
TLA-3T109LF(-T) 10BASE-T............................................................6
TLA-3T110LF(-T) 10BASE-T............................................................6
TLA-3T112LF(-T) 10BASE-T............................................................6
TLA-6T103LF(-T) 10/100BASE-TX ..................................................8
TLA-6T118LF(-T) 10/100BASE-TX ..................................................10
TLA-6T119LF(-T) 10/100BASE-TX ..................................................10
TLA-6T120LF(-T) 10/100BASE-TX ..................................................10
TLA-6T121LF(-T) 10/100BASE-TX ..................................................10
TLA-6T122LF(-T) 10/100BASE-TX ..................................................10
TLA-6T127LF(-T) 10/100BASE-TX, PoE..........................................12
TLA-6T133WLF(-T) 10/100BASE-TX...............................................14
TLA-6T214ALF(-T) 10/100/1000BASE-T .........................................16
TLA-6T213LF(-T)ꢀ10/100/1000BASE-TX........................................18
TLA-7T201LF(-T)ꢀ10/100/1000BASE-TX........................................20
TLA-6T406(-T)ꢀ10/100BASE-TX.....................................................22
TLA-7T101LF(-T)ꢀ10/100/1000BASE-T ..........................................24
Pulse Transformers/Connector Type
TLA-6T776Fꢀ10/100BASE-TX.........................................................26
TLA-6T785ꢀ10/100BASE-TX...........................................................28
LC Modules
TLA-3M103LF(-T)ꢀ10BASE-T ......................................................30
Pulse Transformers/SMD Type
ALT4532 .........................................................................................32
Precautions
The TDK products in this data are intended for usage in general electronics applications (computer, per-
sonal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).
They are neither intend nor warranted for usage in equipment that requires extraordinarily high quality
and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (atomic
energy control instruments, airplane or spaceship instruments, transportation instrument, traffic signal
instruments, combustion control instrument, medical instruments, all types of safety devices, etc.).
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead,
cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and
PBDE, have not been used, except for exempted applications.
(2/33)
PULSE TRANSFORMERS TLA/ALT Series
Pulse Transformers/Pin Terminal Type
TLA-3T101LF(-T) ISO8802.3(IEEE802.3) 10BASE2/5/-T
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Pulse transformer
Port
3
1
• Can be mounted with lead-free solder (260°C max.).
• 16-pin SMD package(1.27mm=50mil pin pitch).
• Using the high-quality and wide-band ferrite cores for LAN.
• Packaging specification is taping and bulk(TLA-3T101LF-T:
Tape and reel, TLA-3T101LF: Bulk).
Operating
Storage
0 to +70°C
–40 to +85°C
Erms:2000V[60s]
Temperature ranges
Withstanding voltage
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
ꢁ
ꢀ
‧
…
11.6max.
1.27typ.
5.9max.
Ԁ
ӹ
TDK∗∗∗
Part No.
Lot No.
„
‟
†
‡
•
‣
․
‥
ӱ
Ӹ
N.C. pins: †‣ꢀ
0.25typ.
∗∗∗: Country of origin
0.10max.
0.45typ.
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
8.89
…
Primary signal pattern
(connected No.„-‥)
keep out area
Secondary signal pattern
(connected No.…-
)
keep out area
„
‥
1.27
0.9
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inter-winding
Inductance
(PH)typ.[100kHz]
„-‟
‡-•
․-‥
Leakage inductance
(PH)max.[100kHz]
DC resistance
(:)max.
Turns ratio
stray capacitance
(pF)max.[100kHz]
„‟-
‡•-ꢀ
․‥-‧…
10
„‟:
‡•:ꢀ
Part No.
„-‟[
-
shorted]
„-‟,
-
‡-•[ -ꢀ shorted]
․-‥[‧-… shorted]
‡-•, -ꢀ
․-‥,‧-…
․‥:‧…
TLA-3T101LF(-T)
• Ta=25°C
1:1
100
0.25
0.35, 0.35
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(3/33)
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
12
2
4
10
5.9
ø1.5+0.1, -0
0.4
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
30.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
30s max.
260˚C max.
230˚C
Temperature range: +5 to +30°C
Natural
cooling
Humidity: 60(%)RH max.
165 15˚C
2˚C/s
120s max.
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(4/33)
TLA-3T106LF(-T)/107LF(-T) ISO8802.3(IEEE802.3) 10BASE-T
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Pulse transformer
Port
4
4
• Can be mounted with lead-free solder (260°C max.).
• 16-pin SMD package(1.27mm=50mil pin pitch).
• Using the high-quality and wide-band ferrite cores for LAN.
• Packaging specification is taping and bulk(TLA-3T10 LF-T:
Tape and reel, TLA-3T10 LF: Bulk).
Operating
Storage
0 to +70°C
–40 to +85°C
Erms: 2000V[60s]
Temperature ranges
Withstanding voltage
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
ꢁ
ꢀ
‧
…
11.6max.
1.27typ.
5.9max.
…
TDK∗∗∗
Part No.
Lot No.
„
‟
†
‡
•
‣
․
‥
„
‥
0.25typ.
∗∗∗: Country of origin
0.10max.
0.45typ.
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
8.89
…
Primary signal pattern
(connected No.„-‥)
keep out area
Secondary signal pattern
(connected No.…-
)
keep out area
„
‥
1.27
0.9
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inter-winding
stray capacitance
(pF)max.[100kHz]
„‟-
Inductance
(PH)min.[100kHz]
„-‟
†-‡
•-‣
Leakage inductance
(PH)max.[100kHz]
DC resistance
Turns ratio
„‟:
†‡:
•‣:ꢀꢁ
․‥:‧…
(:)max.
„-‟,
†-‡,
„-‟[
-
shorted]
-
-
Part No.
†-‡[
-
shorted]
†‡-
•-‣[ꢀ-ꢁ shorted]
․-‥[‧-… shorted]
•-‣, ꢀ-ꢁ
․-‥, ‧-…
•‣-ꢀꢁ
․‥-‧…
12
․-‥
TLA-3T106LF(-T)
TLA-3T107LF(-T)
1:1
1:1.41
130
130
0.3
0.3
0.4, 0.4
0.4, 0.5
12
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(5/33)
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
12
2
4
10
5.9
ø1.5+0.1, -0
0.4
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
30.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
30s max.
260˚C max.
230˚C
Temperature range: +5 to +30°C
Natural
cooling
Humidity: 60(%)RH max.
165 15˚C
2˚C/s
120s max.
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(6/33)
TLA-3T105LF(-T)/109LF(-T)/110LF(-T)/112LF(-T) ISO8802.3(IEEE802.3) 10BASE-T
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
• Can be mounted with lead-free solder (260°C max.).
• 16-pin SMD package(1.27mm=50mil pin pitch).
• Using the high-quality and wide-band ferrite cores for LAN.
Pulse transformer
Common-mode choke
Port
2
2
1
Operating
Storage
0 to +70°C
–40 to +85°C
Erms: 2000V[60s]
Temperature ranges
Withstanding voltage
• Packaging specification is taping and bulk(TLA-3T1
LF-T:
Tape and reel, TLA-3T1
LF: Bulk).
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
11.6max.
5.9max.
ꢁ
ꢀ
‧
…
1.27typ.
…
TDK∗∗∗
Part No.
Lot No.
„
‟
†
‡
•
‣
․
‥
„
‥
N.C. pins: ‡•ꢁ
0.25typ.
∗∗∗: Country of origin
0.10max.
0.45typ.
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
8.89
…
Primary signal pattern
(connected No.„-‥)
keep out area
Secondary signal pattern
(connected No.…-
)
keep out area
„
‥
1.27
0.9
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inter-winding
stray capacitance
(pF)max.[100kHz]
„†-
Inductance
(PH)min.[100kHz]
„-†
‣-‥
Leakage inductance
(PH)max.[100kHz]
DC resistance
(:)max.
„-†
Turns ratio
Part No.
„‟†:
„-†[
-
shorted]
‣․‥:ꢁ‧…
‣-‥[ꢁ-… shorted]
‣-‥
‣‥-ꢁ…
1CT:1CT
1CT:1CT
2CT:1CT
1CT:1CT
1CT:1CT
1CT:1.41CT
1CT:1CT
1CT:2.5CT
130
130
130
130
130
130
130
130
0.3
0.3
12
12
12
12
12
12
12
12
0.5
0.5
0.5
0.5
0.5
0.5
0.85
0.85
TLA-3T105LF(-T)
TLA-3T109LF(-T)
TLA-3T110LF(-T)
0.95
0.35
0.35
0.35
0.35
0.35
TLA-3T112LF(-T)
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(7/33)
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
12
2
4
10
5.9
ø1.5+0.1, -0
0.4
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
30.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
30s max.
260˚C max.
230˚C
Temperature range: +5 to +30°C
Natural
cooling
Humidity: 60(%)RH max.
165 15˚C
2˚C/s
120s max.
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(8/33)
TLA-6T103LF(-T) ISO8802.3(IEEE802.3) 10/100BASE-TX & ATM
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Pulse transformer
Common-mode choke
Inductor
2
2
1
1
• Can be mounted with lead-free solder (260°C max.).
• 16-pin SMD package(2.54mm=100mil pin pitch).
• Excellent common-mode noise suppression.
• Inductance is 350μH or greater (f=100kHz, DC bias=8mA).
• Using the high-quality and wide-band ferrite cores for LAN.
• Packaging specification is taping and bulk(TLA-6T103LF-T:
Tape and reel, TLA-6T103LF: Bulk).
Port
Operating
Storage
0 to +70°C
–40 to +85°C
Erms:1500V[60s]
Temperature ranges
Withstanding voltage
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
1CT:1CT
25.7max.
2.54typ.
5.95max.
„
․
…
RX
TDK∗∗∗
Part No.
Lot No.
‟
‣
•
ꢀ
†
1CT:1CT
„
‥
0.25typ.
TX
∗∗∗: Country of origin
‧
ꢁ
0.10max.
Dimensions in mm
0.45typ.
N.C. pins: ‡‥…
RECOMMENDED PC BOARD PATTERN
17.78
…
Primary signal pattern
(connected No.„-†,
keep out area
-
)
Secondary signal pattern
(connected No.•-․, ‧-ꢁ)
keep out area
„
‥
2.54
1.02
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance
(PH)min.
[DC bias 8mA, 100kHz]
ꢁ-‧
․-‣
350
Insertion loss
(dB)max.
[0.1 to 100MHz]
-ꢁ‧
․‣-„‟
1
1
Inter-winding
stray capacitance
(pF)max.[100kHz]
-ꢁ‧
„‟-․‣
25
Turns ratio
Part No.
: ꢁꢀ‧
„†‟ : ․•‣
1CT:1CT
1CT:1CT
TLA-6T103LF(-T)
• Ta=25°C
350
25
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(9/33)
PACKAGING STYLES
Quantity : 600pieces/reel
TAPE DIMENSIONS
ø1.5+0.1, -0
16
2
13.1
6.1
4
0.4
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
50.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
30s max.
260˚C max.
230˚C
Temperature range: +5 to +30°C
Natural
cooling
Humidity: 60(%)RH max.
165 15˚C
2˚C/s
120s max.
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(10/33)
TLA-6T118LF/119LF/120LF/121LF/122LF(-T) ISO8802.3(IEEE802.3) 10/100BASE-TX
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Pulse transformer
Common-mode choke
Port
2
2
1
• Can be mounted with lead-free solder (260°C max.).
• 16-pin SMD package(1.27mm=50mil pin pitch).
• Excellent common mode noise suppression.
• Inductance is 350μH or greater (f=100kHz, DC bias=8mA).
• Using the high-quality and wide-band ferrite cores for LAN.
Operating
Storage
0 to +70°C
–40 to +85°C
Erms:1500V[60s]
Temperature ranges
Withstanding voltage
• Packaging specification is taping and bulk(TLA-6T1
LF-T:
Tape and reel, TLA-6T1
LF: Bulk).
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
11.6max.
5.9max.
ꢁ
ꢀ
‧
…
1.27typ.
…
TDK∗∗∗
Part No.
Lot No.
„
‟
†
‡
•
‣
․
‥
„
‥
0.25typ.
TX
RX
N.C. pins: ‡•ꢁ
∗∗∗: Country of origin
0.10max.
0.45typ.
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
8.89
…
Primary signal pattern
(connected No.„-‥)
keep out area
Secondary signal pattern
(connected No.…-
)
keep out area
„
‥
1.27
0.9
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance
(PH)min.
Insertion loss
(dB)max.
Inter-winding
stray capacitance
Turns ratio
Part No.
„‟† :
[DC bias 8mA, 100kHz]
[0.1 to 100MHz]
(pF)max.[100kHz]
‣․‥ : ꢁ‧…
-
„†-
ꢁ…-‣‥
1
1
2
1
3.5
1
2.5
1
„†-
‣‥-ꢁ…
25
25
25
25
25
25
25
ꢁ-…
350
350
350
350
350
350
350
350
350
350
1CT:1CT
1CT:1CT
1.41CT:1CT
1CT:1CT
2CT:1CT
1CT:1CT
1CT:1.41CT
1CT:1CT
1.25CT:1CT
1CT:1CT
TLA-6T118LF(-T)
TLA-6T119LF(-T)
TLA-6T120LF(-T)
TLA-6T121LF(-T)
25
25
25
2
1
TLA-6T122LF(-T)
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(11/33)
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
12
2
4
10
5.9
ø1.5+0.1, -0
0.4
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
30.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
30s max.
260˚C max.
230˚C
Temperature range: +5 to +30°C
Natural
cooling
Humidity: 60(%)RH max.
165 15˚C
2˚C/s
120s max.
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(12/33)
TLA-6T127LF(-T) ISO8802.3(IEEE802.3) 10/100BASE-TX, POWER OVER ETHERNET
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
• Can be mounted with lead-free solder (260°C max.).
• 16-pin SMD package(1.27mm=50mil pin pitch).
• Inductance is 350μH or greater (f=100kHz, DC bias=8mA).
• Allowable current is 350mA max.
Pulse transformer
Common-mode choke
Port
2
2
1
Operating
Storage
0 to +70°C
–40 to +85°C
Erms:1500V[60s]
Temperature ranges
Withstanding voltage
• Excellent common mode noise suppression under the power
transmission.
• Packaging specification is taping and bulk(TLA-6T127LF-T:
Tape and reel, TLA-6T127LF: Bulk).
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
ꢁ
ꢀ
‧
…
11.6max.
1.27typ.
5.9max.
…
TDK∗∗∗
Part No.
Lot No.
„
‟
†
‡
•
‣
․
‥
„
‥
TX
RX
0.25typ.
N.C. pins: ‡•
∗∗∗: Country of origin
0.10max.
0.45typ.
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
8.89
…
Primary signal pattern
(connected No.„-‥)
keep out area
Secondary signal pattern
(connected No.…-
)
keep out area
„
‥
1.27
0.9
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance
(PH)min.
[DC bias 8mA, 100kHz]
-
Insertion loss
(dB)max.
[0.1 to 100MHz]
Inter-winding
stray capacitance
(pF)max.[100kHz]
„†-
Turns ratio
Part No.
„‟† :
‣․‥ : ꢁ‧…
„†-
ꢁ-…
350
350
ꢁ…-‣‥
1
1
‣‥-ꢁ…
25
25
1CT:1CT
1CT:1CT
TLA-6T127LF(-T)
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(13/33)
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
12
2
4
10
5.9
ø1.5+0.1, -0
0.4
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
30.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
30s max.
260˚C max.
230˚C
Temperature range: +5 to +30°C
Natural
cooling
Humidity: 60(%)RH max.
165 15˚C
2˚C/s
120s max.
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(14/33)
TLA-6T133WLF(-T) ISO8802.3(IEEE802.3) 10/100BASE-TX
FEATURES
GENERAL SPECIFICATIONS
• Can be used in the wide range of temperature(–40 to +85°C).
• Product conforming to RoHS directive.
Pulse transformer
Common-mode choke
Port
2
2
1
• Can be mounted with lead-free solder (260°C max.).
• 16-pin SMD package(1.27mm=50mil pin pitch).
• Excellent common mode noise suppression.
• Inductance is 350μH or greater (f=100kHz, DC bias=8mA).
• Using the high-quality and wide-band ferrite cores for LAN.
• Packaging specification is taping and bulk(TLA-6T133WLF-T:
Tape and reel, TLA-6T133WLF: Bulk).
Operating
Storage
–40 to +85°C
–40 to +85°C
Erms:1500V[60s]
Temperature ranges
Withstanding voltage
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
11.6max.
1.27typ.
5.9max.
ꢁ
ꢀ
‧
…
…
TDK∗∗∗
Part No.
Lot No.
„
‟
†
‡
•
‣
․
‥
„
‥
0.25typ.
TX
RX
N.C. pins: ‡•ꢁ
∗∗∗: Country of origin
0.10max.
0.45typ.
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
8.89
…
Primary signal pattern
(connected No.„-‥)
keep out area
Secondary signal pattern
(connected No.…-
)
keep out area
„
‥
1.27
0.9
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance
(PH)min.
[DC bias 8mA, 100kHz]
-
Insertion loss
(dB)max.
[0.1 to 100MHz]
„†-
Inter-winding
stray capacitance
(pF)max.[100kHz]
„†-
Turns ratio
Part No.
„‟† :
‣․‥ : ꢁ‧…
ꢁ-…
350
350
ꢁ…-‣‥
1
1
‣‥-ꢁ…
25
25
1CT:1CT
1CT:1CT
TLA-6T133WLF(-T)
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(15/33)
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
12
2
4
10
5.9
ø1.5+0.1, -0
0.4
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
30.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
30s max.
260˚C max.
230˚C
Temperature range: +5 to +30°C
Natural
cooling
Humidity: 60(%)RH max.
165 15˚C
2˚C/s
120s max.
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(16/33)
TLA-6T214ALF(-T) ISO8802.3(IEEE802.3) 10/100/1000BASE-T
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Pulse transformer
Common-mode choke
Port
2
2
1
• Can be mounted with lead-free solder (260°C max.).
• 16-pin SMD package(1.27mm=50mil pin pitch).
• Low profile (H)2.1mm max. for note PC application.
• Excellent common mode noise suppression.
• Inductance is 350μH or greater (f=100kHz, DC bias=8mA).
• Using the high-quality and wide-band ferrite cores for LAN.
• Packaging specification is taping and bulk(TLA-6T214ALF-T:
Tape and reel, TLA-6T214ALF: Bulk).
Operating
Storage
0 to +70°C
–40 to +85°C
Erms:1500V[60s]
Temperature ranges
Withstanding voltage
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
ꢀ
‧
…
12.70max.
2.10max.
ꢀ
…
TDK∗∗∗
Part No.
Lot No.
„
‟
†
‣
․
‥
„
†
‣
‥
0.25typ.
TX
RX
∗∗∗: Country of origin
1.27typ.
0.45typ.
0.10max.
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
8.89
1.27
0.9
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance
(PH)min.
[DC bias 8mA, 100kHz]
-
Insertion loss
(dB)max.
[0.1 to 125MHz]
Inter-winding
stray capacitance
(pF)max.[100kHz]
„‟-
Turns ratio
Part No.
„†‟:
․‣‥:‧ꢁ…
„‟-
‧-…
350
350
‧…-․‥
1
1
‧…-․‥
25
25
1CT:1CT
1CT:1CT
TLA-6T214ALF(-T)
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(17/33)
PACKAGING STYLES
Quantity : 1500pieces/reel
TAPE DIMENSIONS
2.2
2
4
10
ø1.5+0.1, -0
12
0.3
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
30.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED STORE CONDITION
The product is packaged by Anti-humid Al bag, in order to keep a
good solder ability condition and resistance to soldering heat for
products.
30s max.
260˚C max.
230˚C
• Before aluminum bag opening
Temperature range: +5 to +40°C
Humidity: 90(%)RH max.
Natural
cooling
165 15˚C
Storage period: 1year
• After aluminum bag opening
Temperature range: +5 to +30°C
Humidity: 60(%)RH max.
2˚C/s
120s max.
Storage period: 1week
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(18/33)
TLA-6T213LF(-T) ISO8802.3(IEEE802.3) 10/100/1000BASE-T
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Pulse transformer
Common-mode choke
Port
2
2
1
• Can be mounted with lead-free solder (260°C max.).
• 12-pin SMD package(1.27mm=50mil pin pitch).
• Because it is low profile design of 2.2mm max., space saving is
possible and is suitable for notebook PC.
Operating
Storage
0 to +70°C
–40 to +85°C
Erms:1500V[60s]
Temperature ranges
Withstanding voltage
• Excellent common mode noise suppression.
• Inductance is 350μH or greater (f=100kHz, DC bias=8mA).
• Using the high-quality and wide-band ferrite cores for LAN.
• Packaging specification is taping and bulk(TLA-6T213LF-T:
Tape and reel, TLA-6T213LF: Bulk).
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
Ӽ
ӻ
Ӻ
ӹ
Ӹ
ӷ
8.4max.
2.2max.
Ӽ
ӷ
TDK∗∗∗
Part No.
Lot No.
„
‟
†
Ӵ
ӵ
Ӷ
„
‣
0.2typ.
TX
RX
∗∗∗: Country of origin
1.27typ.
0.45typ.
0.10max.
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
6.35
1.27
0.9
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance
(PH)min.
[DC bias 8mA, 100kHz]
ꢀ-ꢁ
‥-․
350
Insertion loss
(dB)max.
[0.1 to 100MHz]
„‟-ꢀꢁ
‥․-•‣
1
Inter-winding
stray capacitance
(pF)max.[100kHz]
„‟-ꢀꢁ
‥․-•‣
25
Turns ratio
Part No.
„†‟:ꢀ‧ꢁ
•‡‣:‥…․
TLA-6T213LF(-T)
• Ta=25°C
1CT:1CT
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(19/33)
PACKAGING STYLES
Quantity : 1500pieces/reel
TAPE DIMENSIONS
12
2
4
10
2.2
ø1.5+0.1, -0
0.3
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
22.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED STORE CONDITION
The product is packaged by Anti-humid Al bag, in order to keep a
good solder ability condition and resistance to soldering heat for
products.
30s max.
• Before aluminum bag opening
Temperature range: +5 to +40°C
Humidity: 90(%)RH max.
260˚C max.
230˚C
Natural
cooling
165 15˚C
Storage period: 1year
• After aluminum bag opening
Temperature range: +5 to +30°C
Humidity: 60(%)RH max.
2˚C/s
120s max.
Storage period: 1week
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(20/33)
TLA-7T201LF(-T) ISO8802.3(IEEE802.3) 10/100/1000BASE-T
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Pulse transformer
Common-mode choke
Port
4
4
• Can be mounted with lead-free solder (260°C max.).
• 24-pin SMD package(1.27mm=50mil pin pitch).
• Because it is low profile design of 2.2mm max., space saving is
possible and is suitable for notebook PC.
1[1000BASE-T]
0 to +70°C
–40 to +85°C
Erms:1500V[60s]
Operating
Storage
Temperature ranges
Withstanding voltage
• Excellent common mode noise suppression.
• Inductance is 350μH or greater (f=100kHz, DC bias=8mA).
• Using the high-quality and wide-band ferrite cores for LAN.
• Packaging specification is taping and bulk(TLA-7T201LF-T:
Tape and reel, TLA-7T201LF: Bulk).
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
‵
‴
″
′
‱
‰
ꢂ
16max.
2.2max.
‵
ӽ
TDK∗∗∗
Part No.
Lot No.
„
‟
†
Ӵ
ӵ
Ӷ
․
‥
…
‧
ꢀ
ꢁ
„
Ӽ
0.2typ.
∗∗∗: Country of origin
1.27typ.
0.45typ.
0.10max.
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
13.97
1.27
0.9
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance
(PH)min.
[DC bias 8mA, 100kHz]
‵-‴
‱-‰
ꢂ-
Insertion loss
(dB)max.
Inter-winding
Turns ratio
„†‟:‵″‴
stray capacitance
(pF)max.[100kHz]
„‟-‵‴
•‣-‱‰
․‥-ꢂ
[0.1 to 100MHz]
„‟-‵‴
•‣-‱‰
․‥-ꢂ
ꢁꢀ-
Part No.
•‡‣:‱′‰
․…‥:ꢂ
ꢁ‧ꢀ:
-
ꢁꢀ-
TLA-7T201LF(-T)
• Ta=25°C
1CT:1CT
350
1
25
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(21/33)
PACKAGING STYLES
Quantity : 1500pieces/reel
TAPE DIMENSIONS
2.2
2
4
10
ø1.5+0.1, -0
12
0.3
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
30.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED STORE CONDITION
The product is packaged by Anti-humid Al bag, in order to keep a
good solder ability condition and resistance to soldering heat for
products.
30s max.
• Before aluminum bag opening
Temperature range: +5 to +40°C
Humidity: 90(%)RH max.
260˚C max.
230˚C
Natural
cooling
165 15˚C
Storage period: 1year
• After aluminum bag opening
Temperature range: +5 to +30°C
Humidity: 60(%)RH max.
2˚C/s
120s max.
Storage period: 1week
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(22/33)
TLA-6T406(-T) ISO8802.3(IEEE802.3) 10/100BASE-TX
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Pulse transformer
Common-mode choke
Port
8
8
4
• Can be mounted with lead-free solder (250°C max.).
• 40-pin SMD package(1.27mm=50mil pin pitch) for Quad port.
• Excellent common-mode noise suppression.
• Inductance is 350μH or greater (f=100kHz, DC bias=8mA).
• Using the high-quality and wide-band ferrite cores for LAN.
• Packaging specification is taping and bulk(TLA-6T406-T: Tape
and reel, TLA-6T406: Bulk).
Operating
Storage
0 to +70°C
–40 to +85°C
Erms:1500V[60s]
Temperature ranges
Withstanding voltage
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
25.9max.
5.8max.
⁅
⁄ ⁃ ⁂
⁁ ⁀
‿ ‾ ‽
‼ ※
› ‹ ‸
‷ ‶
‵ ‴ ″
′
⁅
′
∗∗∗
TDK
Part No.
Lot No.
„
‟ † ‡
• ‣
․ ‥ …
‧ ꢀ
ꢁ
ꢂ ‰
‱
0.25typ.
„
‱
TX
RX
RX
TX
TX
RX
RX
TX
∗∗∗: Country of origin
1.27typ.
0.45typ.
0.15max.
Dimensions in mm
(
)
24.13typ. 1.27×19
RECOMMENDED PC BOARD PATTERN
(
)
24.13 1.27×19
1.27
⁅
′
Primary signal pattern
(connected No.„-‱)
keep out area
Secondary signal pattern
(connected No.′-⁅)
keep out area
„
‱
0.65
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance
(PH)min.
[DC bias 8mA, 100kHz]
⁅-⁄......
⁂-⁁......
350
Insertion loss
(dB)max.
[0.1 to 100MHz]
„‟-⁅⁄.....
‡•-⁂⁁.....
1
Inter-winding
stray capacitance
(pF)max.[100kHz]
„‟-⁅⁄.....
‡•-⁂⁁.....
40
Turns ratio
Part No.
„†‟:⁅⁃⁄.....
‡†•:⁂⁃⁁.....
1CT:1CT
1CT:1CT
TLA-6T406(-T)
• Ta=25°C
350
1
40
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(23/33)
PACKAGING STYLES
Quantity : 500pieces/reel
TAPE DIMENSIONS
2
ø1.5+0.1, -0
16.1
4
6
0.5 0.05
20
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
50.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED STORE CONDITION
The product is packaged by Anti-humid Al bag, in order to keep a
good solder ability condition and resistance to soldering heat for
products.
30s max.
250˚C max.
230˚C
• Before aluminum bag opening
Temperature range: +5 to +40°C
Humidity: 90(%)RH max.
Natural
cooling
165 15˚C
Storage period: 1year
• After aluminum bag opening
Temperature range: +5 to +30°C
Humidity: 60(%)RH max.
2˚C/s
120s max.
Storage period: 1week
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(24/33)
TLA-7T101LF(-T) ISO8802.3(IEEE802.3) 10/100/1000BASE-T
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Pulse transformer
Common-mode choke
Port
4
4
• Can be mounted with lead-free solder (260°C max.).
• 24-pin SMD package(1.27mm=50mil pin pitch).
• Excellent common-mode noise suppression.
• Inductance is 350μH or greater (f=100kHz, DC bias=8mA).
• Using the high-quality and wide-band ferrite cores for LAN.
• Packaging specification is taping and bulk(TLA-7T101LF-T:
Tape and reel, TLA-7T101LF: Bulk).
1(1000BASE-T)
–40 to +85°C
–40 to +85°C
Erms:1500V[60s]
Operating
Storage
Temperature ranges
Withstanding voltage
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
15.82max.
1.27typ.
5.9max.
‵
TDK∗∗∗
Part No.
Lot No.
ӱ
ꢁ
0.25typ.
∗∗∗: Country of origin
0.10max.
0.45typ.
Dimensions in mm
RECOMMENDED PC BOARD PATTERN
13.97
Primary signal pattern
(connected No.
keep out area
-
)
Secondary signal pattern
(connected No.
keep out area
-
)
1.27
0.9
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance
(PH)min.
[DC bias 8mA, 100kHz]
‴-″
‱-‰
-
-
Insertion loss
Inter-winding
stray capacitance
(pF)max.[100kHz]
‟†-‴″
•‣-‱‰
‥…-
Turns ratio
‟„† : ‴‵″
(dB)max.
[0.1 to 100MHz]
‟†-‴″
•‣-‱‰
‥…-
Part No.
•‡‣ : ‱′‰
‥․… : ꢂ
ꢁ‧ꢀ :
ꢁꢀ-
ꢁꢀ-
TLA-7T101LF(-T)
• Ta=25°C
1CT:1CT
350
1
25
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(25/33)
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
12
2
4
9.8
5.9
ø1.5+0.1, -0
0.4
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
30.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
30s max.
Temperature range: +5 to +30°C
260˚C max.
230˚C
Natural
cooling
Humidity: 60(%)RH max.
165 15˚C
2˚C/s
120s max.
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(26/33)
Pulse Transformers/Connector Type
TLA-6T776F ISO8802.3(IEEE802.3) 10/100BASE-TX
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Pulse transformer
Common-mode choke
Port
2
2
1
• Pulse transformer, common mode choke, resistor and high with-
standing voltage capacitor are integrated into RJ-45 modular
jack.
Operating
Storage
–40 to +85°C
–40 to +85°C
Temperature ranges
• Excellent common mode noise suppression.
• Inductance is 200μH or greater (f=100kHz, DC bias=8mA).
• The product features high quality, containing a self-winding
surface-mount pulse transformer and common mode choke.
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
TX
2.5typ.
16 0.5
21.45 0.5
„
₷
₸
₹
₺
‟
†
RX
₾
₷
‡
PCB
•
CABLE
₻
‣
․
₼
₽
₾
75Ω
‥
Dimensions in mm
75Ω
0.001μF
N.C. pin: ․
RECOMMENDED PC BOARD PATTERN
8.89typ.
1.27typ.
8-ø0.9
‟ ‡ ‣ ‥
2-ø1.6
„ † •
․
2-ø3.25
11.43typ.
15.75typ.
16.0typ.
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Turns ratio
Inductance
(PH)min.
[DC bias 8mA, 100kHz]
₷-₸
₹-₼
200
Insertion loss
(dB)max.
[0.1 to 100MHz]
„‟-₷₸
₹₼-‡•
1.5
Part No.
„†‟:₷₸
‡‣•:₹₼
1CT:1
1CT:1
TLA-6T776F
• Ta=25°C
200
1.5
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(27/33)
PACKAGING STYLES
Tray : 360pieces/box
RECOMMENDED SOLDERING CONDITION
FLOW SOLDERING
5 1s
255˚C max.
Natural
cooling
130˚C
90˚C
Preheating: 30 to 45s
( )
Time s
Preheating: 90 to 130°C for 30 to 45 seconds.
Soldering: 255°C max. 5 1 seconds
• Perform flow soldering from the underside of the board.
• The surface of plastic protrusions inserted into the board may
melt, but this causes no problems with regard to electrical
properties or mounting.
• The cutted end of terminal has no plating(out of subject of solder
ability).
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
Temperature range: +5 to +40°C
Humidity: 10 to 75%RH max.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(28/33)
TLA-6T785 ISO8802.3(IEEE802.3) 10/100BASE-TX
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Pulse transformer
Common-mode choke
Port
2
2
1
• Pulse transformer, common mode choke, resistor and high with-
standing voltage capacitor are integrated into RJ-45 modular
jack.
Operating
Storage
–40 to +85°C
–40 to +85°C
Temperature ranges
• Excellent common mode noise suppression.
• Inductance is 200μH or greater (f=100kHz, DC bias=8mA).
• The product features high quality, containing a self-winding
surface-mount pulse transformer and common mode choke.
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
TX
18.5 0.5
„
₷
₸
₹
₺
16 0.5
12 0.5
‟
†
RX
‡
PCB
•
CABLE
₻
₾
₷
‣
․
₼
₽
₾
75Ω
‥
75Ω
0.001μF
Dimensions in mm
N.C. pin: ․
RECOMMENDED PC BOARD PATTERN
16.0typ.
11.43typ.
2-ø3.2
2-ø2.1
․ • † „
‥
‣ ‡ ‟
8-ø0.9
1.27typ.
8.89typ.
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Turns ratio
Inductance
(PH)min.
[DC bias 8mA, 100kHz]
₷-₸
₹-₼
200
Insertion loss
(dB)max.
[0.1 to 100MHz]
„‟-₷₸
₹₼-‡•
1.5
Part No.
„†‟:₷₸
‡‣•:₹₼
1CT:1
1CT:1
TLA-6T785
• Ta=25°C
200
1.5
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(29/33)
PACKAGING STYLES
Tray : 500pieces/box
RECOMMENDED SOLDERING CONDITION
FLOW SOLDERING
5 1s
255˚C max.
Natural
cooling
130˚C
90˚C
Preheating: 30 to 45s
( )
Time s
Preheating: 90 to 130°C for 30 to 45 seconds.
Soldering: 255°C max. 5 1 seconds
• Perform flow soldering from the underside of the board.
• The surface of plastic protrusions inserted into the board may
melt, but this causes no problems with regard to electrical
properties or mounting.
• The cutted end of terminal has no plating(out of subject of solder
ability).
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
Temperature range: +5 to +40°C
Humidity: 10 to 75%RH max.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(30/33)
LC Modules
TLA-3M103LF(-T) ISO8802.3(IEEE802.3) 10BASE-T
FEATURES
GENERAL SPECIFICATIONS
• Product conforming to RoHS directive.
Low pass filter
Pulse transformer
Common-mode choke
Port
2
2
2
1
• Can be mounted with lead-free solder (260°C max.).
• 16-pin SMD package (2.54mm=100mil pin pitch).
• Pulse transformer, common-mode choke and low pass filter are
integrated into 16-pin SMD package.
Operating
Storage
0 to +70°C
–40 to +85°C
Erms:1500V[60s]
Temperature ranges
Withstanding voltage
• Using the high-quality and wide-band ferrite cores for LAN.
• Packaging specification is taping and bulk(TLA-3M103LF-T:
Tape and reel, TLA-3M103LF: Bulk).
SHAPES AND DIMENSIONS
CIRCUIT DIAGRAM
1CT:1CT
25.7max.
2.54typ.
5.95max.
„
‥
L.P. FILTER
L.P. FILTER
L.P. FILTER
L.P. FILTER
…
TX
TDK∗∗∗
Part No.
Lot No.
†
•
‣
․
…
1CT:1CT
„
‥
0.25typ.
RX
∗∗∗: Country of origin
ꢀ
‧
0.10max.
Dimensions in mm
0.45typ.
ꢁ
N.C. pins: ‟‡
RECOMMENDED PC BOARD PATTERN
17.78
2.54
1.02
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Insertion loss
Attenuation
Impedance
C.M.R.R.
(dB)max.[5 to 10MHz]
„†-‥‣
…ꢁ-
1
1
(dB)min.[30 to 100MHz]
(:)typ.[5 to 10MHz]
„-†, ‥-‣
(dB)min.[1 to 100MHz]
Part No.
„†-‥‣
…ꢁ-
25
„†-‥‣
-…ꢁ
25
-
, …-ꢁ
100, 100
100, 100
TLA-3M103LF(-T)
• Ta=25°C
25
25
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(31/33)
PACKAGING STYLES
Quantity : 600pieces/reel
TAPE DIMENSIONS
ø1.5+0.1, -0
16
2
13.1
4
6.1
0.4
Dimensions in mm
REEL DIMENSIONS
2 0.5
ø21 0.8
ø13 0.2
50.4max.
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
30s max.
260˚C max.
230˚C
Temperature range: +5 to +30°C
Natural
cooling
Humidity: 60(%)RH max.
165 15˚C
2˚C/s
120s max.
1 to 2˚C/s
( )
Time s
• Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
• This profile is reference data we recommend. Please check in
your actual process.
• For reliable soldering, the thickness of solder paste screen
should be over the terminal co-planality.
• The cutted end of terminal has no plating(out of subject of solder
ability).
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(32/33)
Pulse Transformers/SMD Type
ALT4532
FEATURES
SHAPES AND DIMENSIONS
• The ALT4532 Series is a wound chip type pulse transformer
developed for LANs.
L
3
4
• Compatible with 10BASE-T, 100BASE-TX, and 1000BASE-T.
• High-quality product with automatic winding.
• Product conforming to RoHS directive.
2
1
5
6
APPLICATIONS
LAN interface portion of various devices such as network devices,
communication devices, and digital home appliances
PRODUCT IDENTIFICATION
ALT 4532 - 201 - T 001
(1)
(2)
(3) (4) (5)
Dimensions in mm
(1) Series name
Type
L
W
3.2 0.2
3.2 0.2
T
(2) Dimensions LuW
ALT4532-171-T001
ALT4532-201-T001
4.5 0.2
4.5 0.2
2.2max.
2.9max.
(3) Inductance[at 100kHz/DC bias=8mA]
201 : 200μH min.
(4) Packaging style
RECOMMENDED PC BORARD PATTERN
T: ø330mm reel taping
(5) TDK internal code
1.45
1.45
SPECIFICATIONS
Operating
Temperature range
–40 to +85°C
–40 to +85°C
Storage(After mount)
PACKAGING STYLE AND QUANTITIES
1.1
Dimensions in mm
Packaging style
Taping
Reel
ø180mm
Quantity
2000 pieces/reel
MEASURING CIRCUIT
3
4
5
2
1
6
ELECTRICAL CHARACTERISTICS
Inductance
(μH)min.
[DC bias 8mA, 100kHz]
„-‟
•-‡
Insertion loss
(dB)max.
[0.1 to 100MHz]
Inter-winding
stray capacitance
(pF)max.
Turns ratio
Part No.
„‣‟ : •†‡
„‟-•‡
[100kHz]
ALT4532-171-T001
ALT4532-201-T001
1CT : 1CT
1CT : 1CT
170
200
2.5
1.5
35
35
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
(33/33)
TYPICAL ELECTRICAL CHARACTERISTICS
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS
ALT4532-171-T001
ALT4532-201-T001
0
–1.0
–2.0
–3.0
–4.0
0
–1.0
–2.0
–3.0
–4.0
0.1
0.1
1
10
100
1
10
100
(
)
(
)
Frequency MHz
Frequency MHz
TYPICAL APPLICATIONS (100BASE-TX)
LAN
IC
LAN
Connector
Pulse transformers
Common mode filters
ALT4532-171-T001
ALT4532-201-T001
ACM2012-201-2P
ACM2012-361-2P
ACM2012-681-2P
ACM2012-102-2P
Note) Peripheral circuits differ depending on the IC used; check the circuits with the application note of the IC, etc.
• All specifications are subject to change without notice.
006-02 / 20120414 / edlan_tla.
相关型号：
©2020 ICPDF网 联系我们和版权申明