UF1717V-103YR25-02 [TDK]
Single Phase EMI Filter, 280V, 50/60HzHz, ROHS COMPLIANT PACKAGE-4;
| 型号： | UF1717V-103YR25-02 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Single Phase EMI Filter, 280V, 50/60HzHz, ROHS COMPLIANT PACKAGE-4 LTE |
| 文件： | 总4页 (文件大小：98K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
(1/4)
Common Mode Choke Coils(Line Filters) for AC Power Supply
Conformity to RoHS Directive
Compact and Separable Bobbin Type UF Series
TDK common mode choke coils(line filters) are used in a wide
range of prevention of electromagnetic interference(EMI) and radio
frequency interference(RFI) from power supply lines and for pre-
vention of multifunctioning of products such as measuring equip-
ment and system equipment.
FEATURES
PRODUCT IDENTIFICATION
• Wide range of selection.
• High impedance at applicable frequency.
• High self-resonant frequency.
UF
(1)
V
A
Y
R
(6)
01
(7)
-
-
(2)
(3) (4)
(5)
(1) Core shape
UF: U-type core
(2) Dimensional code
Length×Height
(3) External shape code
V: Vertical type H: Horizontal type
(4) High µ material
(5) Inductance valueꢀ
Example) 133:13mH
(6) Rated current value
Example) 3R0:3.0A
(7) Product management number
SELECTION CHART
Minimum
package quantity
(pieces/box)
Inductance value
min.
Rated current
(A)
Handling power∗
Weight
(g)typ.
Series Configuration
Type
L×I2(mH×A2)
UF1717V
UF1717H
UF1717V
UF1815SG
0.2 to 10mH
0.2 to 10mH
10 to 60µH
50 to 350µH
0.25 to 1.6
0.25 to 1.6
1 to 3
0.6
0.6
0.08
1.2
3.5
3.5
3
640
480
640
1280
Two sections bobbin types
UF
Two sections bobbin types
(For high frequency)
1 to 5
4.6
∗ Handling power=(Inductance value)×(Current)2. It is possible to design within the range below this value.
[Example] The coil for 2A can make even the inductance of 2.5mH or less a product for handling power 10.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
002-01 / 20100118 / e93_uf.
(2/4)
Two Sections Bobbin Type UF Series
FEATURES
• This series is compact in size due to its use of high permeability
ferrite core.
UF1717V/UF1717H(2 SEPARABLE BOBBIN) TYPES
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
1000
17.5max.
17.5max.
103YR25
100
10
ø0.6
4
ø0.6
2
1
2
4
3
8 0.5
L1
L
2
1
2
1
3
282Y0R5
132Y0R7
601Y1R0
0.1
3
4
8 0.5
1
201Y1R6
Weight: 3.5g typ.
0.01
0.01
0.1
1
10
100
Recommended hole diameter: ø1.1
Dimensions in mm
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Inductance
(mH)min.
DC resistance Rated current
Part No.
(Ω)max.
3.5
2.5
1.3
1
Iac(A)max.
0.25
0.3
0.4
0.5
2000
UF1717V-103YR25-02
UF1717V-702Y0R3-01
UF1717V-342Y0R4-01
UF1717V-282Y0R5-01
UF1717V-152Y0R6-01
UF1717V-132Y0R7-01
UF1717V-601Y1R0-01
UF1717V-201Y1R6-01
UF1717H-103YR25-01
UF1717H-702Y0R3-01
UF1717H-342Y0R4-01
UF1717H-282Y0R5-01
UF1717H-152Y0R6-01
UF1717H-132Y0R7-01
UF1717H-601Y1R0-01
UF1717H-201Y1R6-01
10
7
100min.
3.4
2.8
1.5
1.3
0.6
0.2
10
45max.
0.55
0.5
0.2
0.1
3.5
2.5
1.3
1
0.6
0.7
1
1.6
0.25
0.3
0.4
–20 to +120
–20 to +85
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
7
3.4
2.8
1.5
1.3
0.6
0.2
0.5
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
0.55
0.5
0.2
0.1
0.6
0.7
1
1.6
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
UF1717V
UF1717H
640pieces/box
480pieces/box
ꢀ
• All specifications are subject to change without notice.
002-01 / 20100118 / e93_uf.
(3/4)
Two Sections Bobbin Type(For High Frequency) UF Series
FEATURES
• This series is designed to reduce stray capacity between
windings by using a single-layer coil construction on Ni-Zn ferrite
cores, which offer excellent high frequency characteristics.
• This series provides excellent noise suppression for high
frequency ranges including the FM band.
• Since the windings are divided into two sections, this filter can
also be used as a signal line with excellent withstanding voltage.
UF1717V(2 SEPARABLE BOBBIN FOR HIGH FREQUENCY) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
8 0.5
1
2
4
3
10
600Y1R0
300Y1R2
17.5max.
1
1
2
4
3
200Y2R0
L1
L2
100Y3R0
0.1
ø0.6
Weight: 3g typ.
Recommended hole diameter: ø1.1
Dimensions in mm
0.01
0.001
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
DC resistance Rated current
Part No.
(µH)min.
(mΩ)max.
300
Iac(A)max.
1
2000
UF1717V-600Y1R0-03
UF1717V-300Y1R2-03
UF1717V-200Y2R0-03
UF1717V-100Y3R0-03
60
30
20
10
150
100
1.2
2
100min.
45max.
50
3
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
–20 to +120
–20 to +85
PACKAGING QUANTITIES
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
UF1717V
640pieces/box
ꢀ
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• All specifications are subject to change without notice.
002-01 / 20100118 / e93_uf.
(4/4)
Two Sections Bobbin Type(For High Frequency) UF Series
FEATURES
• This series uses a Mn-Zn ferrite core and yet it offers excellent
noise suppression into the high frequencies due to its low
distributed inductance construction based on a single layer
winding.
• This compact filters's inductance has been improved by as much
as 50% compared to exsting products of compareble size while
its hight profile has been reduced by approximately 30%.
UF1815SG(2 SEPARABLE BOBBIN FOR HIGH FREQUENCY) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
18max.
17max.
10
351Y1R0
281Y1R2
1
2
4
3
L1
L2
181Y1R6
1
ø0.7
1
2
4
3
151Y2R2
Weight: 4.6g typ.
0.1
0.01
800Y3R0
650Y4R0
Recommended hole diameter: ø1.2
Dimensions in mm
13 0.5
500Y5R0
0.001
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
DC resistance Rated current
Part No.
(µH)min.
(mΩ)max.
300
250
130
100
50
Iac(A)max.
1
1.2
1.6
2.2
3
2000
UF1815SG-351Y1R0-01 350
UF1815SG-281Y1R2-01 280
UF1815SG-181Y1R6-01 180
UF1815SG-151Y2R2-01 150
UF1815SG-800Y3R0-01 80
UF1815SG-650Y4R0-01 65
UF1815SG-500Y5R0-01 50
100min.
45max.
–20 to +120
30
4
25
5
–20 to +85
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
PACKAGING QUANTITIES
∗1 Pb free solder(Sn-3Ag-0.5Cu)
UF1815SG
1280pieces/box
∗2 However, this product is not recognized by each regulations.
• All specifications are subject to change without notice.
002-01 / 20100118 / e93_uf.
相关型号：
©2020 ICPDF网 联系我们和版权申明