VAF201610FA-1 [TDK]
Noise suppression filter For audio lines;
| 型号： | VAF201610FA-1 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Noise suppression filter For audio lines |
| 文件： | 总4页 (文件大小：209K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
I N D U C T O R S
Noise suppression filter
Cl
Br
Pb
For audio lines (Class-D amplifier noise suppression)
VAF-FA series
REACH Halogen
Free
Lead
Free
RoHS
SVHC-Free
VAF201610FA-1 type
FEATURES
A compact noise suppression component for audio lines that accommodates high currents.
Distortions are greatly reduced during insertion with the adoption of newly-developed low distortion ferrite materials.
Small reductions in volume due to its low resistance, and optimal for devices that require high sound quality as the generating of sound
distortions is controlled.
High efficacy is put for high frequency noise suppression of class-D amplifier harmonics in 100MHz because of high damping property.
Operating temperature range: –40 to +105°C (including self-temperature rise)
APPLICATION
AI speakers, Bluetooth speakers, TV speakers
Application guides: Smart phones/tablets
PART NUMBER CONSTRUCTION
VAF
201610
F
A
-
131
-
1
L×W×H dimensions
2.0×1.6×1.0 mm
Impedance
() at 100MHz
Series name
Characteristics
Internal code
Marking
CHARACTERISTICS SPECIFICATION TABLE
Impedance
DC resistance
Rated current
Part No.
[100MHz]
()typ.
130
280
440
( )max.
0.040
0.050
0.076
0.079
()typ.
0.032
0.042
0.063
0.066
(A)max.
3.08
2.69
2.19
2.14
(A)typ.
3.62
3.16
2.58
2.52
VAF201610FA-131-1
VAF201610FA-281-1
VAF201610FA-441-1
VAF201610FA-841-1
840
Measurement equipment
Measurement item
Impedance
DC resistance
Product No.
4294A
34420A
Manufacturer
Keysight Technologies
Hewlett-Packard
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/4)
20180906
suppression-filter_commercial_vaf201610fa-1_en.
I N D U C T O R S
VAF201610FA-1 type
Z FREQUENCY CHARACTERISTICS
2000
841
1500
1000
500
0
441
281
131
1
10
100
1000
(
)
Frequency MHz
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
0
131
5
10
15
20
281
441
841
1
10
100
1000
(
)
Frequency MHz
Measurement equipment
Product No.
4294A
Manufacturer
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/4)
20180906
suppression-filter_commercial_vaf201610fa-1_en.
I N D U C T O R S
VAF201610FA-1 type
SHAPE & DIMENSIONS
PACKAGING STYLE
REEL DIMENSIONS
2.0 0.5
(
)
(
)
(
)
0.65
0.7
0.65
2.0 0.2
Dimensions in mm
ø13 0.2
ø21 0.8
9.0 0.3
13 1.4
ø180+0/–3
Dimensions in mm
TAPE DIMENSIONS
RECOMMENDED LAND PATTERN
Sprocket
2.0 0.05
4.0 0.1
0.25 0.05
hole
+0.1
–0
1.5
K
A
Cavity
Dimensions in mm
0.65
0.7
2.0
0.65
4.0 0.1
Dimensions in mm
Type
VAF201610FA-1
A
B
2.3 0.1
K
1.9 0.1
1.10 0.05
PACKAGE QUANTITY
RECOMMENDED REFLOW PROFILE
Package quantity
2000 pcs/reel
Preheating
Soldering
Natural
cooling
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
Peak
Operating
temperature range
–40 to +105 °C
Operating temperature range includes self-temperature rise.
The storage temperature range is for after the assembly.
Storage
temperature range
Individual
weight
15 mg
260°C
–40 to +105 °C
230°C
230°C
180°C
10s
30s
150°C
60 to 120s
Time
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/4)
20180906
suppression-filter_commercial_vaf201610fa-1_en.
I N D U C T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 30°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(8) Public information-processing equipment
(9) Military equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipmentꢀꢀ
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/4)
20180906
suppression-filter_commercial_vaf201610fa-1_en.
相关型号：
VAM-3
Wide Band Low Power Amplifier, 0MHz Min, 2000MHz Max, Hybrid, PLASTIC, CASE MMM168, SOT-143, 4 PIN
MINI
VAM-3+
Wide Band Low Power Amplifier, 0MHz Min, 2000MHz Max, Hybrid, ROHS COMPLIANT, PLASTIC, CASE MMM168, SOT-143, 4 PIN
MINI
VAM-6
Wide Band Low Power Amplifier, 0MHz Min, 2000MHz Max, Hybrid, PLASTIC, CASE MMM168, SOT-143, 4 PIN
MINI
VAM-6+
Wide Band Low Power Amplifier, 0MHz Min, 2000MHz Max, Hybrid, ROHS COMPLIANT, PLASTIC, CASE MMM168, SOT-143, 4 PIN
MINI
©2020 ICPDF网 联系我们和版权申明