VLBU9664100LT-R10L [TDK]
General Purpose Inductor, 0.1uH, 15%, 1 Element, Ferrite-Core, SMD, 3825, CHIP;型号: | VLBU9664100LT-R10L |
厂家: | TDK ELECTRONICS |
描述: | General Purpose Inductor, 0.1uH, 15%, 1 Element, Ferrite-Core, SMD, 3825, CHIP 测试 功率感应器 电感器 |
文件: | 总4页 (文件大小:158K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
I N D U C T O R S
Inductors for power circuits
Wound ferrite
Cl
Br
Pb
REACH Halogen
Free
Lead
Free
RoHS
SVHC-Free
VLBU series
VLBU9664100L type
FEATURES
This is a power supply circuit for SMD inductors using low-loss ferrite materials.
Large current and lower DCR were achieved by the connecting wire-less structure.
This is a narrow inductor for multiphase applications.
Operating temperature range: –40 to +125°C (including self-temperature rise)
APPLICATION
Servers, BTS, VRM, others
PART NUMBER CONSTRUCTION
VLBU
9664100
LT
-
R10
L
L×W×H dimensions
9.6×6.4×10.0mm max.
Inductance
(µH)
Inductance
tolerance
Series name
Internal code
CHARACTERISTICS SPECIFICATION TABLE
Rated current
Isat
L
Measuring
frequency
DC resistance
Part No.
Itemp
(µH)
0.10
0.12
Tolerance
15%
15%
(kHz)
100
100
(m)typ.
0.125
0.125
Tolerance (A)typ.
(A)typ.
75.0
75.0
110
VLBU9664100LT-R10L
VLBU9664100LT-R12L
10%
90
10%
Rated current: smaller value of either Isat or Itemp.
Isat: When based on the inductance change rate (20% below the nominal value, under an environment of 20°C)
Itemp: When based on the temperature increase (temperature increase of 40°C by self heating)
Measurement equipment
Measurement item
L
Product No.
IM3536
Manufacturer
HIOKI
DC resistance
Rated current Isat
RM3545
3260+3265B
HIOKI
Wayne Kerr Electronics
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/4)
20190704
inductor_commercial_power_vlbu9664100l_en.
I N D U C T O R S
VLBU9664100L type
L FREQUENCY CHARACTERISTICS
0.3
0.2
R12L
R10L
0.1
0
0.1
1
10
100
(
)
Frequency MHz
Measurement equipment
Product No.
4294A
Manufacturer
Keysight Technologies
* Equivalent measurement equipment may be used.
INDUCTANCE VS. DC BIAS CHARACTERISTICS
0.2
0.15
R12L
R10L
0.1
0.05
0
0
20
40
60
DC current A
80
100
120
( )
Measurement equipment
Product No.
3260B+3265B
Manufacturer
Wayne Kerr Electronics
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/4)
20190704
inductor_commercial_power_vlbu9664100l_en.
I N D U C T O R S
VLBU9664100L type
SHAPE & DIMENSIONS
PACKAGING STYLE
REEL DIMENSIONS
6.4max.
10.0max.
(2.2)
2.0 0.5
2
Dimensions in mm
(
)
1.0
ø13.0 0.5
24.4
30.4
ø21.0 0.8
ø330
Dimensions in mm
TAPE DIMENSIONS
RECOMMENDED LAND PATTERN
Sprocket
hole
+0.1
1.5
2.0 0.1 4.0 0.1
0.5
–0
3.85
2.7
3.85
Dimensions in mm
K
Cavity
12.0 0.1
A
Dimensions in mm
Type
VLBU9664100L
A
(6.6)
B
(9.8)
K
(10.2)
RECOMMENDED REFLOW PROFILE
PACKAGE QUANTITY
Package quantity
400 pcs/reel
Preheating
Soldering
Natural
cooling
Peak
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
250°C
Operating
temperature range
–40 to +125 °C
Operating temperature range includes self-temperature rise.
The storage temperature range is for after the assembly.
Storage
temperature range
–40 to +125°C
Individual
weight
2.6 g
230°C
230°C
180°C
5s
150°C
60 to 120s
30s
Time
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/4)
20190704
inductor_commercial_power_vlbu9664100l_en.
I N D U C T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is within 6 months. Be sure to follow the storage conditions (temperature: 5 to 30°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(8) Public information-processing equipment
(9) Military equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipmentꢀꢀ
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/4)
20190704
inductor_commercial_power_vlbu9664100l_en.
相关型号:
VLC1000B-CZC00-000
Rocker Switch, DPDT, (on)-off-(on), Momentary, Quick Connect Terminal, Rocker Actuator, Panel Mount,
Carling Techn
©2020 ICPDF网 联系我们和版权申明