首页 |元器件品牌

VLS201610ET-3R3M-CA [TDK]

暂无描述;
VLS201610ET-3R3M-CA
型号： VLS201610ET-3R3M-CA
厂家： TDK ELECTRONICS    TDK ELECTRONICS
描述：

暂无描述

电源电路 电感器 固定电感器 测试 功率感应器
文件： 总53页 (文件大小：7593K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
I
N
D
U
C
T
O
R
S
May 2013  
Inductors for Power Circuits  
Wound Ferrite  
VLS-Eseries  
VLS201610E  
VLS201612E  
VLS2010E  
VLS2012E  
VLS252008E  
VLS252010E  
VLS252012E  
VLS252015E  
VLS3010E  
VLS3012E  
VLS3015E  
VLS4012E  
(1/52)  
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS  
Before using these products, be sure to request the delivery specifications.  
SAFETY REMINDERS  
Please pay sufficient attention to the warnings for safe designing when using these products.  
REMINDERS  
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH  
or less).  
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.  
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).  
Before soldering, be sure to preheat components.  
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature  
does not exceed 150°C.  
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.  
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.  
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to  
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.  
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal  
design.  
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.  
A malfunction may occur due to magnetic interference.  
Use a wrist band to discharge static electricity in your body through the grounding wire.  
Do not expose the products to magnets or magnetic fields.  
Do not use for a purpose outside of the contents regulated in the delivery specifications.  
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications  
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement  
equipment, industrial robots) under a normal operation and use condition.  
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or  
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to  
society, person or property.  
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions  
set forth in the each catalog, please contact us.  
(1) Aerospace/Aviation equipment  
(2) Transportation equipment (cars, electric trains, ships, etc.)  
(3) Medical equipment  
(8) Public information-processing equipment  
(9) Military equipment  
(10) Electric heating apparatus, burning equipment  
(11) Disaster prevention/crime prevention equipment  
(12) Safety equipment  
(4) Power-generation control equipment  
(5) Atomic energy-related equipment  
(6) Seabed equipment  
(13) Other applications that are not considered general-purpose  
applications  
(7) Transportation control equipment  
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing  
protection circuit/device or providing backup circuits in your equipment.  
001-01 / 20130516 / e531_vls.
(2/52)  
I
N
D
U
C
T
O
R
S
Product compatible with RoHS directive  
Halogen-free  
Inductors for Power Circuits  
Wound Ferrite  
Compatible with lead-free solders  
Overview of the VLS-E Series  
FEATURES  
Magnetic shield type wound inductor for power circuits.  
Low-profile product lineup with max. heights of 0.8mm, 0.95mm, 1.0mm, 1.2mm, and 1.5mm allowing for different usages.  
High magnetic shield construction and compatible with high-density mounting.  
APPLICATION  
Smart phones, tablet terminals, HDDs, SSDs, DVCs, DSCs, mobile display panels, portable game devices, compact power supply  
modules, other  
PART NUMBER CONSTRUCTION  
VLS  
201610  
E
T
-
R47  
N
L×W×H Dimensions  
(mm)  
Inductance  
(µH)  
Inductance  
tolerance  
Series name  
internal code  
Packaging style  
201610  
201612  
2010  
2.0×1.6×1.0  
2.0×1.6×1.2  
2.0×2.0×1.0  
2.0×2.0×1.2  
2.5×2.0×0.8  
2.5×2.0×1.0  
2.5×2.0×1.2  
2.5×2.0×1.5  
3.0×3.0×1.0  
3.0×3.0×1.2  
3.0×3.0×1.5  
4.0×4.0×1.2  
T
Taping  
R47  
2R2  
100  
0.47  
2.2  
10  
2012  
252008  
252010  
252012  
252015  
3010  
3012  
3015  
4012  
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT  
Temperature range  
Package quantity  
Individual weight  
Operating  
temperature  
Storage  
temperature  
Type  
  
(pieces/reel)  
2000  
（°C）  
（°C）  
（mg）  
12  
14  
16  
17  
17  
15  
24  
28  
36  
40  
52  
67  
VLS201610E  
VLS201612E  
VLS2010E  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
–40 to +105  
2000  
2000  
2000  
2000  
2000  
2000  
2000  
2000  
VLS2012E  
VLS252008E  
VLS252010E  
VLS252012E  
VLS252015E  
VLS3010E  
VLS3012E  
VLS3015E  
VLS4012E  
2000  
2000  
1000  
  
Operating temperature range includes self-temperature rise.  
The Storage temperature range is for after the circuit board is mounted.  
  
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/  
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(3/52)  
I
N
D
U
C
T
O
R
S
Overview of the VLS-E Series  
RECOMMENDED REFLOW PROFILE  
Preheating  
Soldering  
Natural  
cooling  
Peak  
T4  
T3  
T3  
T2  
t3  
t2  
T1  
t1  
t: Time  
Preheating  
Temp.  
T1  
Soldering  
Temp.  
T3  
Peak  
Temp.  
T4  
Time  
t1  
60 to 120s  
Time  
t2  
30s  
Time  
t3  
10s  
T2  
180°C  
150°C  
230°C  
260°C  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(4/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS201610E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
0.65  
2.0 0.1  
0.65  
0.7  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
0.65  
0.7  
0.65  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(5/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS201610E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
1.85  
1.65  
1.35  
1.10  
0.94  
0.75  
0.64  
0.53  
0.40  
typ.  
Idc1  
2.10  
1.85  
1.50  
1.20  
1.05  
0.84  
0.72  
0.59  
0.45  
(µH)  
0.47  
Tolerance  
30%  
30%  
30%  
30%  
20%  
20%  
20%  
20%  
max.  
0.065  
0.086  
0.119  
0.181  
0.276  
0.458  
0.554  
0.840  
1.380  
typ.  
Idc2  
1.95  
1.65  
1.40  
1.15  
0.95  
0.73  
0.67  
0.54  
0.42  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.054  
0.072  
0.099  
0.151  
0.230  
0.382  
0.462  
0.700  
1.150  
VLS201610ET-R47N  
VLS201610ET-R68N  
VLS201610ET-1R0N  
VLS201610ET-1R5N  
VLS201610ET-2R2M  
VLS201610ET-3R3M  
VLS201610ET-4R7M  
VLS201610ET-6R8M  
VLS201610ET-100M  
0.68  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
20%  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(6/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS201610E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
10  
1R5N  
1R0N  
R68N  
R47N  
1
0.1  
0.01  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(7/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS201610E Type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
100M  
10  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1R0N  
1
R68N  
R47N  
0.1  
0
0.5  
1
1.5  
2
2.5  
DC current(A)  
○ Measurement equipment  
Product No.  
Manufacturer  
4285A+42841A+42842C  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(8/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS201612E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
0.65  
2.0 0.1  
0.65  
0.7  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
0.65  
0.7  
0.65  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(9/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS201612E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
1.90  
1.70  
1.50  
1.20  
1.05  
0.79  
0.70  
0.58  
0.47  
typ.  
Idc1  
2.15  
1.90  
1.65  
1.30  
1.15  
0.88  
0.78  
0.65  
0.53  
(µH)  
0.47  
tolerance  
30%  
30%  
30%  
30%  
20%  
20%  
20%  
20%  
max.  
0.063  
0.072  
0.093  
0.159  
0.195  
0.357  
0.438  
0.708  
1.026  
typ.  
Idc2  
2.00  
1.85  
1.65  
1.25  
1.15  
0.85  
0.75  
0.60  
0.50  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.052  
0.060  
0.077  
0.132  
0.162  
0.297  
0.365  
0.590  
0.855  
VLS201612ET-R47N  
VLS201612ET-R68N  
VLS201612ET-1R0N  
VLS201612ET-1R5N  
VLS201612ET-2R2M  
VLS201612ET-3R3M  
VLS201612ET-4R7M  
VLS201612ET-6R8M  
VLS201612ET-100M  
0.68  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
20%  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(10/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS201612E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
100M  
6R8M  
4R7M  
10  
3R3M  
2R2M  
1R5N  
1R0N  
R68N  
R47N  
1
0.1  
0.01  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(11/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS201612E Type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1
1R0N  
R68N  
R47N  
0.1  
0
0.5  
1
1.5  
2
2.5  
DC current(A)  
○ Measurement equipment  
Product No.  
Manufacturer  
4285A+42841A+42842C  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(12/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS2010E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
0.65  
2.0 0.1  
0.65  
0.7  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
Dimensions in mm  
0.65  
0.7  
0.65  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(13/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS2010E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
2.00  
1.45  
1.20  
1.00  
0.83  
0.70  
0.57  
0.47  
0.40  
0.33  
typ.  
Idc1  
2.25  
1.65  
1.30  
1.10  
0.93  
0.78  
0.64  
0.52  
0.44  
0.37  
(µH)  
0.56  
Tolerance  
30%  
30%  
30%  
20%  
20%  
20%  
20%  
20%  
max.  
0.060  
0.108  
0.156  
0.228  
0.348  
0.408  
0.648  
0.936  
1.476  
2.040  
typ.  
Idc2  
2.05  
1.55  
1.25  
1.05  
0.86  
0.79  
0.63  
0.52  
0.41  
0.35  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.050  
0.090  
0.130  
0.190  
0.290  
0.340  
0.540  
0.780  
1.230  
1.700  
VLS2010ET-R56N  
VLS2010ET-1R0N  
VLS2010ET-1R5N  
VLS2010ET-2R2M  
VLS2010ET-3R3M  
VLS2010ET-4R7M  
VLS2010ET-6R8M  
VLS2010ET-100M  
VLS2010ET-150M  
VLS2010ET-220M  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
15  
22  
20%  
20%  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(14/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS2010E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
220M  
150M  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1R0N  
10  
1
R56N  
0.1  
0.01  
0.01  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(15/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS2010E Type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
220M  
150M  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1
1R0N  
R56N  
0.1  
0
0.5  
1
1.5  
2
2.5  
DC current(A)  
○ Measurement equipment  
Product No.  
Manufacturer  
4285A+42841A+42842C  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(16/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS2012E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
0.65  
2.0 0.1  
0.65  
0.7  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
0.65  
0.7  
0.65  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(17/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS2012E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
2.05  
1.70  
1.45  
1.20  
1.00  
0.84  
0.70  
0.57  
0.47  
0.40  
0.33  
typ.  
Idc1  
2.25  
1.90  
1.65  
1.30  
1.10  
0.93  
0.78  
0.64  
0.52  
0.44  
0.37  
(µH)  
0.47  
Tolerance  
30%  
30%  
30%  
30%  
20%  
20%  
20%  
20%  
max.  
0.059  
0.066  
0.086  
0.108  
0.153  
0.228  
0.336  
0.498  
0.834  
1.062  
1.764  
typ.  
Idc2  
2.00  
1.85  
1.65  
1.45  
1.25  
1.00  
0.84  
0.69  
0.53  
0.47  
0.35  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.049  
0.055  
0.071  
0.090  
0.127  
0.190  
0.280  
0.415  
0.695  
0.885  
1.470  
VLS2012ET-R47N  
VLS2012ET-R68N  
VLS2012ET-1R0N  
VLS2012ET-1R5N  
VLS2012ET-2R2M  
VLS2012ET-3R3M  
VLS2012ET-4R7M  
VLS2012ET-6R8M  
VLS2012ET-100M  
VLS2012ET-150M  
VLS2012ET-220M  
0.68  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
15  
22  
20%  
20%  
20%  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(18/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS2012E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
220M  
150M  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1R0N  
10  
1
R68N  
R47N  
0.1  
0.01  
0.001  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(19/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS2012EType  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
220M  
150M  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1
1R0N  
R68N  
R47N  
0.1  
0
0.5  
1
1.5  
2
2.5  
DC current(A)  
○ Measurement equipment  
Product No.  
Manufacturer  
4285A+42841A+42842C  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(20/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS252008E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
0.85  
2.5 0.1  
0.85  
0.8  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
0.85  
0.8  
0.85  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(21/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252008E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
1.65  
1.20  
1.00  
0.77  
0.73  
0.61  
0.49  
0.43  
typ.  
Idc1  
1.80  
1.35  
1.10  
0.86  
0.82  
0.68  
0.55  
0.48  
(µH)  
0.47  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10.0  
Tolerance  
30%  
30%  
30%  
20%  
20%  
20%  
20%  
20%  
max.  
0.140  
0.219  
0.248  
0.290  
0.416  
0.580  
0.818  
1.232  
typ.  
Idc2  
1.20  
0.97  
0.91  
0.84  
0.70  
0.59  
0.50  
0.41  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.116  
0.182  
0.206  
0.241  
0.346  
0.483  
0.681  
1.026  
VLS252008ET-R47N  
VLS252008ET-1R0N  
VLS252008ET-1R5N  
VLS252008ET-2R2M  
VLS252008ET-3R3M  
VLS252008ET-4R7M  
VLS252008ET-6R8M  
VLS252008ET-100M  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(22/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252008E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
100M  
6R8M  
4R7M  
3R3M  
10  
2R2M  
1R5N  
1
1R0N  
R47N  
0.1  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(23/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252008E Type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1
1R0N  
R47N  
0.1  
0
0.5  
1
1.5  
2
2.5  
DC current(A)  
○ Measurement equipment  
Product No.  
Manufacturer  
4285A+42841A+42842C  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(24/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS252010E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
0.85  
2.5 0.1  
0.85  
0.8  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
0.85  
0.8  
0.85  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(25/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252010E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
2.50  
2.05  
1.75  
1.45  
1.20  
0.94  
0.80  
0.68  
0.56  
typ.  
Idc1  
2.80  
2.30  
1.90  
1.60  
1.30  
1.05  
0.89  
0.76  
0.63  
(µH)  
0.47  
Tolerance  
30%  
30%  
30%  
30%  
20%  
20%  
20%  
20%  
max.  
0.046  
0.062  
0.084  
0.128  
0.190  
0.275  
0.398  
0.532  
0.854  
typ.  
Idc2  
2.65  
2.20  
1.90  
1.50  
1.20  
1.00  
0.82  
0.71  
0.55  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.038  
0.052  
0.070  
0.107  
0.158  
0.229  
0.332  
0.443  
0.712  
VLS252010ET-R47N  
VLS252010ET-R68N  
VLS252010ET-1R0N  
VLS252010ET-1R5N  
VLS252010ET-2R2M  
VLS252010ET-3R3M  
VLS252010ET-4R7M  
VLS252010ET-6R8M  
VLS252010ET-100M  
0.68  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
20%  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(26/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252010E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
100M  
6R8M  
4R7M  
10  
3R3M  
2R2M  
1R5N  
1R0N  
R68N  
1
R47N  
0.1  
0.01  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(27/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252010E Type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1
1R0N  
R68N  
R47N  
0.1  
0
0.5  
1
1.5  
DC current(A)  
2
2.5  
3
○ Measurement equipment  
Product No.  
4285A+42841A+42842C  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(28/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS252012E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
0.85  
2.5 0.1  
0.85  
0.8  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
Dimensions in mm  
0.85  
0.8  
0.85  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(29/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252012E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
2.75  
2.20  
1.80  
1.55  
1.25  
1.05  
0.85  
0.73  
typ.  
Idc1  
3.10  
2.45  
2.00  
1.75  
1.40  
1.20  
0.95  
0.82  
(µH)  
0.47  
Tolerance  
30%  
30%  
30%  
20%  
20%  
20%  
20%  
20%  
max.  
0.056  
0.087  
0.126  
0.154  
0.272  
0.405  
0.612  
0.756  
typ.  
Idc2  
2.15  
1.70  
1.45  
1.30  
0.98  
0.81  
0.65  
0.59  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.047  
0.073  
0.105  
0.129  
0.227  
0.338  
0.510  
0.630  
VLS252012ET-R47N  
VLS252012ET-1R0N  
VLS252012ET-1R5N  
VLS252012ET-2R2M  
VLS252012ET-3R3M  
VLS252012ET-4R7M  
VLS252012ET-6R8M  
VLS252012ET-100M  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(30/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252012E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
10  
1R5N  
1R0N  
1
R47N  
0.1  
0.01  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(31/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252012E Type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1
1R0N  
R47N  
0.1  
0
0.5  
1
1.5  
2
2.5  
3
3.5  
4
DC current(A)  
○ Measurement equipment  
Product No.  
4285A+42841A+42842C  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(32/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS252015E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
0.85  
)
2.5 0.1  
0.85  
0.8  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
Dimensions in mm  
0.85  
0.8  
0.85  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(33/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252015E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
1.95  
1.75  
1.50  
1.20  
1.00  
0.85  
0.72  
typ.  
Idc1  
2.20  
1.95  
1.70  
1.35  
1.15  
0.95  
0.80  
(µH)  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
Tolerance  
30%  
30%  
20%  
20%  
20%  
20%  
20%  
max.  
0.082  
0.120  
0.160  
0.219  
0.318  
0.480  
0.588  
typ.  
Idc2  
1.75  
1.45  
1.25  
1.05  
0.89  
0.73  
0.66  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.068  
0.100  
0.133  
0.182  
0.265  
0.400  
0.490  
VLS252015ET-1R0N  
VLS252015ET-1R5N  
VLS252015ET-2R2M  
VLS252015ET-3R3M  
VLS252015ET-4R7M  
VLS252015ET-6R8M  
VLS252015ET-100M  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(34/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252015E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1R0N  
10  
1
0.1  
0.01  
0.01  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(35/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS252015E Type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1
1R0N  
0.1  
0
0.5  
1
1.5  
2
2.5  
DC current(A)  
○ Measurement equipment  
Product No.  
Manufacturer  
4285A+42841A+42842C  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(36/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS3010E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
0.9  
3.0 0.1  
0.9  
1.2  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
1.0  
1.0  
1.0  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(37/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS3010E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
1.60  
1.35  
1.20  
1.00  
0.81  
0.69  
0.56  
0.48  
0.38  
typ.  
Idc1  
1.80  
1.50  
1.30  
1.10  
0.90  
0.77  
0.63  
0.54  
0.43  
(µH)  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
tolerance  
30%  
30%  
20%  
20%  
20%  
20%  
20%  
20%  
max.  
0.072  
0.085  
0.116  
0.156  
0.204  
0.312  
0.468  
0.612  
0.900  
typ.  
Idc2  
2.10  
1.90  
1.70  
1.50  
1.30  
1.00  
0.80  
0.70  
0.60  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.060  
0.071  
0.097  
0.130  
0.170  
0.260  
0.390  
0.510  
0.750  
VLS3010ET-1R0N  
VLS3010ET-1R5N  
VLS3010ET-2R2M  
VLS3010ET-3R3M  
VLS3010ET-4R7M  
VLS3010ET-6R8M  
VLS3010ET-100M  
VLS3010ET-150M  
VLS3010ET-220M  
15  
22  
20%  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(38/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS3010E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
100  
220M  
150M  
100M  
6R8M  
10  
4R7M  
3R3M  
2R2M  
1R5N  
1R0N  
1
0.1  
0.01  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(39/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS3010E Type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
220M  
150M  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1
1R5N  
1R0N  
0.1  
0
0.5  
1
1.5  
2
2.5  
DC current(A)  
○ Measurement equipment  
Product No.  
Manufacturer  
4285A+42841A+42842C  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(40/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS3012E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
0.9  
3.0 0.1  
0.9  
1.2  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
1.0  
1.0  
1.0  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(41/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS3012E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
1.90  
1.50  
1.35  
1.05  
0.95  
0.81  
0.64  
0.55  
0.44  
0.37  
0.31  
typ.  
Idc1  
2.15  
1.70  
1.50  
1.20  
1.05  
0.90  
0.76  
0.62  
0.49  
0.41  
0.35  
(µH)  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
15  
22  
33  
47  
Tolerance  
30%  
30%  
20%  
20%  
20%  
20%  
20%  
20%  
max.  
0.068  
0.076  
0.096  
0.120  
0.156  
0.228  
0.336  
0.516  
0.756  
1.248  
1.500  
typ.  
Idc2  
2.00  
1.85  
1.70  
1.55  
1.30  
1.05  
0.89  
0.74  
0.61  
0.48  
0.44  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.056  
0.063  
0.080  
0.100  
0.130  
0.190  
0.280  
0.430  
0.630  
1.040  
1.250  
VLS3012ET-1R0N  
VLS3012ET-1R5N  
VLS3012ET-2R2M  
VLS3012ET-3R3M  
VLS3012ET-4R7M  
VLS3012ET-6R8M  
VLS3012ET-100M  
VLS3012ET-150M  
VLS3012ET-220M  
VLS3012ET-330M  
VLS3012ET-470M  
20%  
20%  
20%  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(42/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS3012E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
1000  
100  
470M  
330M  
220M  
150M  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1
1R0N  
0.1  
0.01  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(43/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS3012E Type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
470M  
330M  
220M  
150M  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1
1R0N  
0.1  
0
0.5  
1
1.5  
DC current(A)  
2
2.5  
3
○ Measurement equipment  
Product No.  
4285A+42841A+42842C  
Manufacturer  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(44/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS3015E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
0.9  
3.0 0.1  
0.9  
1.2  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
1.0  
1.0  
1.0  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(45/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS3015E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
2.00  
1.50  
1.35  
1.15  
1.00  
0.92  
0.70  
0.58  
0.48  
0.39  
0.32  
typ.  
Idc1  
2.20  
1.70  
1.50  
1.30  
1.10  
1.00  
0.78  
0.65  
0.54  
0.43  
0.35  
(µH)  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
15  
22  
33  
47  
tolerance  
30%  
30%  
20%  
20%  
20%  
20%  
20%  
20%  
max.  
0.058  
0.075  
0.084  
0.112  
0.136  
0.216  
0.288  
0.456  
0.660  
0.984  
1.500  
typ.  
Idc2  
2.10  
1.85  
1.75  
1.50  
1.35  
1.05  
0.94  
0.75  
0.62  
0.51  
0.41  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.048  
0.062  
0.070  
0.093  
0.113  
0.180  
0.240  
0.380  
0.550  
0.820  
1.250  
VLS3015ET-1R0N  
VLS3015ET-1R5N  
VLS3015ET-2R2M  
VLS3015ET-3R3M  
VLS3015ET-4R7M  
VLS3015ET-6R8M  
VLS3015ET-100M  
VLS3015ET-150M  
VLS3015ET-220M  
VLS3015ET-330M  
VLS3015ET-470M  
20%  
20%  
20%  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(46/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS3015E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
1000  
100  
470M  
330M  
220M  
150M  
100M  
10  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1R0N  
1
0.1  
0.01  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(47/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS3015E Type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
470M  
330M  
220M  
150M  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1R0N  
1
0.1  
0
0.5  
1
1.5  
2
2.5  
DC current(A)  
○ Measurement equipment  
Product No.  
Manufacturer  
4285A+42841A+42842C  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(48/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
VLS4012E Type  
SHAPE & DIMENSIONS  
(
)
(
)
(
)
1.3  
4.0 0.1  
1.3  
1.4  
Dimensions in mm  
RECOMMENDED LAND PATTERN  
1.3  
1.4  
1.3  
Dimensions in mm  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(49/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS4012E Type  
ELECTRICAL CHARACTERISTICS  
CHARACTERISTICS SPECIFICATION TABLE  
DC resistance  
()  
Rated current(A)  
Measuring  
frequency  
(MHz)  
L
Part No.  
max.  
Idc1  
2.50  
2.10  
1.70  
1.40  
1.20  
1.00  
0.89  
0.70  
0.63  
0.47  
0.41  
typ.  
Idc1  
2.80  
2.30  
1.90  
1.60  
1.40  
1.20  
0.99  
0.78  
0.70  
0.53  
0.46  
(µH)  
1.0  
1.5  
2.2  
3.3  
4.7  
6.8  
10  
15  
22  
33  
47  
Tolerance  
30%  
30%  
20%  
20%  
20%  
20%  
20%  
20%  
max.  
0.060  
0.072  
0.081  
0.102  
0.118  
0.156  
0.228  
0.372  
0.468  
0.804  
1.020  
typ.  
Idc2  
2.65  
2.45  
2.20  
2.00  
1.90  
1.60  
1.33  
1.05  
0.95  
0.70  
0.61  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
0.050  
0.060  
0.067  
0.085  
0.098  
0.130  
0.190  
0.310  
0.390  
0.670  
0.850  
VLS4012ET-1R0N  
VLS4012ET-1R5N  
VLS4012ET-2R2M  
VLS4012ET-3R3M  
VLS4012ET-4R7M  
VLS4012ET-6R8M  
VLS4012ET-100M  
VLS4012ET-150M  
VLS4012ET-220M  
VLS4012ET-330M  
VLS4012ET-470M  
20%  
20%  
20%  
 Rated current: smaller value of either Idc1 or Idc2.  
Idc1: When based on the inductance change rate (30% below the nominal value)  
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)  
○ Measurement equipment  
Measurement item  
Product No.  
Manufacturer  
L
4194A  
VP-2941A  
4285A+42841A+42842C  
Agilent Technologies  
Panasonic  
Agilent Technologies  
DC resistance  
Rated current Idc1  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(50/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS4012E Type  
ELECTRICAL CHARACTERISTICS  
L FREQUENCY CHARACTERISTICS GRAPH  
1000  
100  
470M  
330M  
220M  
150M  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1R0N  
1
0.1  
0.01  
0.1  
1
10  
100  
1000  
(
)
Frequency MHz  
○ Measurement equipment  
Product No.  
Manufacturer  
4294A  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(51/52)  
I
N
D
U
C
T
O
R
S
VLS-E seriesꢀ  
VLS4012E Type  
ELECTRICAL CHARACTERISTICS  
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH  
100  
470M  
330M  
220M  
150M  
10  
100M  
6R8M  
4R7M  
3R3M  
2R2M  
1R5N  
1
1R0N  
0.1  
0
0.5  
1
1.5  
2
2.5  
3
3.5  
DC current(A)  
○ Measurement equipment  
Product No.  
Manufacturer  
4285A+42841A+42842C  
Agilent Technologies  
＊ Equivalent measurement equipment may be used.  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.
(52/52)  
I
N
D
U
C
T
O
R
S
VLS-E series  
Packaging Style  
REEL DIMENSIONS  
2.0 0.5  
B
Type  
A
B
C
D
9
9
9
9
9
9
9
9
9
9
9
13  
E
VLS201610E  
VLS201612E  
VLS2010E  
ø180  
ø180  
ø180  
ø180  
ø180  
ø180  
ø180  
ø180  
ø180  
ø180  
ø180  
ø180  
13  
13  
13  
13  
13  
13  
13  
13  
13  
13  
13  
17  
ø60  
ø60  
ø60  
ø60  
ø60  
ø60  
ø60  
ø60  
ø60  
ø60  
ø60  
ø60  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
VLS2012E  
VLS252008E  
VLS252010E  
VLS252012E  
VLS252015E  
VLS3010E  
VLS3012E  
VLS3015E  
VLS4012E  
(
)
1.0  
E
ø13.0 0.5  
ø21.0 0.8  
D
* These values are typical values.  
A
Dimensions in mm  
TAPE DIMENSIONS  
øD0  
P2  
P0  
P1  
K
t
Dimensions in mm  
A0  
Type  
A0  
B0  
2.2  
2.2  
2.2  
2.2  
øD0  
E
F
P0  
P1  
P2  
W
K
t
VLS201610E 1.8  
VLS201612E 1.8  
VLS2010E  
VLS2012E  
VLS252008E 2.15 2.7  
VLS252010E 2.15 2.7  
VLS252012E 2.15 2.7  
VLS252015E 2.15 2.7  
VLS3010E  
VLS3012E  
VLS3015E  
VLS4012E  
1.5+0.10/-0 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.1 2.00 0.05 8.0 0.2 1.1 0.25  
1.5+0.10/-0 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.1 2.00 0.05 8.0 0.2 1.3 0.25  
1.5+0.10/-0 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.1 2.00 0.05 8.0 0.2 1.1 0.25  
1.5+0.10/-0 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.1 2.00 0.05 8.0 0.2 1.35 0.25  
1.5+0.10/-0 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.1 2.00 0.05 8.0 0.2 0.95 0.25  
1.5+0.10/-0 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.1 2.00 0.05 8.0 0.2 1.15 0.3  
1.5+0.10/-0 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.1 2.00 0.05 8.0 0.2 1.35 0.3  
1.5+0.10/-0 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.1 2.00 0.05 8.0 0.2 1.65 0.3  
1.5+0.10/-0 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.1 2.00 0.05 8.0 0.2 1.15 0.25  
1.5+0.10/-0 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.1 2.00 0.05 8.0 0.2 1.35 0.25  
1.5+0.10/-0 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.1 2.00 0.05 8.0 0.2 1.65 0.25  
2.2  
2.2  
3.2  
3.2  
3.2  
3.2  
3.2  
3.2  
4.25 4.25 1.5+0.10/-0 1.75 0.1 5.5 0.05 4.0 0.1 8.0 0.1 2.00 0.05 12.0 0.2 1.35 0.3  
• All specifications are subject to change without notice.  
001-01 / 20130516 / e531_vls.

相关型号：

VLS201610ET-4R7M

 Inductors for Power Circuits Wound Ferrite

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK

VLS201610ET-6R8M

 Inductors for Power Circuits Wound Ferrite

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK

VLS201610ET-6R8M-CA

 General Purpose Inductor,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK

VLS201610ET-R47N

 Inductors for Power Circuits Wound Ferrite

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK

VLS201610ET-R47N-CA

 General Purpose Inductor,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK

VLS201610ET-R68N

 Inductors for Power Circuits Wound Ferrite

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK

VLS201610ET_4R7M

 Inductors for Power Circuits Wound Ferrite

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK

VLS201610HBX-100M-1

 Wound Metal

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK

VLS201610HBX-1R0M-1

 General Purpose Inductor,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK

VLS201610HBX-1R5M-1

 Wound Metal

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK

VLS201610HBX-2R2M-1

 Wound Metal

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK

VLS201610HBX-3R3M-1

 General Purpose Inductor,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TDK
©2020 ICPDF网 联系我们和版权申明