YFF31AH2A104MT0Y0N [TDK]
3-terminal filters For automotive large-current power line;型号: | YFF31AH2A104MT0Y0N |
厂家: | TDK ELECTRONICS |
描述: | 3-terminal filters For automotive large-current power line |
文件: | 总6页 (文件大小:147K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
E M C C o m p o n e n t s
January 2019
3-terminal filters
For automotive large-current power line
YFF-AHseries
YFF31AH
3216 [1206 inch]* Feed through filter
* Dimensions Code JIS[EIA]
(2/6)
E M C C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in automotive electronic equipment under a normal operation and use condi-
tion.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(8) Public information-processing equipment
(9) Military equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipmentꢀꢀ
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
20190115 / 3tf_automotive_power_yff-ah_en.
(3/6)
E M C C o m p o n e n t s
Product compatible with RoHS directive
Lead-free compatible
3-terminal filters
For automotive large-current power line
Overview of the YFF-AH series
FEATURES
Compact and high-performance EMC countermeasure components specialized for in-vehicle applications Also demonstrates an excel-
lent effect for decoupling use
Compliant with AEC-Q200
Good attenuation characteristic in wide bandwidth.
Supports large current (6 to 10 A)
APPLICATION
EMC countermeasure and decoupling in power lines for various in-vehicle electronic equipment such as ECUs, car navigation systems, in-
vehicle camera systems, millimeter wave radar systems, etc.
PART NUMBER CONSTRUCTION
YFF
31
AH
2A
105
M
T
0Y
N
□
L x W
dimensions
(mm)
Rated
voltage
(V)
Internal
electrode
Ni
Capacitance
Reel size
Series
name
Internal
code
Product internal code
Tolerance
Taping
(pF)
(mm)
100,000
31 3.2×1.6
2A
100
104
M
0
9
ø178
ø330
For automotive
large-current
power line
20%
(0.1µF)
1,000,000
(1µF)
AH
105
PACKAGING STYLE AND SPECIFICATIONS
Package quantity (piece/reel)
Individual weight
Type
ø178
ø330
(g)
YFF31AH
2,000
10,000
0.0342
RoHS Directive Compliant Product: See the following for more details. https://product.tdk.com/info/en/environment/rohs/index.html
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190115 / 3tf_automotive_power_yff-ah_en.
(4/6)
E M C C o m p o n e n t s
Overview of the YFF-AH series
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
PRECAUTIONS FOR HANDLING
Before soldering, be sure to preheat components. The T pre-
heating temperature must be 150°C max. with attention paid to
thermal shock.
Soldering
Slow cooling
)
Natural cooling
(
Preheating
Natural cooling of components in the air is recommended. On
the other hand, when dipping them in a solvent for purposes,
such as cleaning, make sure that the temperature difference
(T) is 100°C.
260˚C max.
When performing hand soldering for circuit modification, apply
the soldering iron to the copper foil area of the printed circuit
board for 3 seconds or less. The temperature of the iron tip
should not exceed 300°C.
Use a wrist band to discharge static electricity in your body
through the grounding wire.
0
When incorporating the printed circuit board on which this prod-
uct is mounted into a frame, etc., do not apply stress to the prod-
uct through local bending of the board by tightening of screws,
etc.
60 seconds or more
10s max.
HAND SOLDERING
300
Preheating
Make as short as possilble (within three seconds)
0
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190115 / 3tf_automotive_power_yff-ah_en.
(5/6)
E M C C o m p o n e n t s
YFF-AH series YFF31AH type (Feed through filter)
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
1.40
1.20 0.30
0.10min.
GND
4
1
3
IN/OUT
OUT/IN
Land pattern+Solder resist
Land pattern
2
GND
1.20
2.50
Dimensions in mm
3.20 0.20
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Part No.
Insertion loss
40dB frequency range
(MHz)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range (After mount)
(°C)
DC6A/105°C
DC4A/125°C
DC6A/105°C
DC4A/125°C
DC10A/105°C
DC6A/125°C
DC10A/105°C
DC6A/125°C
0.8 to 2000
0.8 to 2000
100
100
100
100
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
YFF31AH2A105MT0Y0N
YFF31AH2A105MT0Y9N
YFF31AH2A104MT0Y0N
YFF31AH2A104MT0Y9N
7
to 2000
to 2000
7
The part numbers are TDK’s standard specification products.
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
ELECTRICAL CURRENT RATING DERATING
12
0
10
20
30
40
50
60
70
80
90
2A104M
10
2A104
8
6
2A105M
2A105
4
2
0
–55 –35 –15
5
25
45
65
(
85
105 125
0.1
1
10
100
1000
10000
)
Ambient temperature °C
(
)
Frequency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190115 / 3tf_automotive_power_yff-ah_en.
(6/6)
E M C C o m p o n e n t s
YFF-AH series Packaging style
REEL DIMENSIONS
C
E
r
W
t
D
A
Unit: mm
Reel
ø178
ø330
A
B
C
D
E
W
t
r
ø178 2.0
ø382 max.(ø330 nom.)
ø60 2.0
ø50 min.
ø13 0.5
ø13 0.5
ø21 0.8
ø21 0.8
2.0 0.5
2.0 0.5
9.0 0.3
10.0 1.5
2.0 0.5
2.0 0.5
1.0
1.0
TAPE DIMENSIONS
Plastic tape
Round sprocket holes
J
Square punch hole for component mounting
t
A
H
G
F
Q
K
Unit: mm
Type
YFF31AH
A
B
C
D
E
F
G
H
J
K
t
Q
1.9 typ. 3.5 typ. 8.0 0.3
3.5 0.05 1.75 0.1 4.0 0.1
2.0 0.05 4.0 0.1
ø1.5+0.1/–0
2.5 max. 0.3 max. ø0.5 min.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190115 / 3tf_automotive_power_yff-ah_en.
相关型号:
©2020 ICPDF网 联系我们和版权申明